ˆˇ˘ - AIH€¦ · ˜˚˜˛˝˜˙ˆˇ˘ ˛ ˆ˜˚˙ ˜ ˘ ˜ ˙ˆˇ aih order desk (907) 276-7201 ˙˙˙˙˙˙ 1-800-478-7201 order online today ships out tomorrow!

ALASKA INDUSTRIAL HARDWARE, INC.

AIH Order Desk(907) 276-72011-800-478-7201www. .com

ORDER ONLINE TODAY — SHIPS OUT TOMORROW!

133

Plumbing

PLUMBING

Page 134

Page 146

Page 155

Page 137 Page 141

Page 149 Page 153

Page 158 Page 160

2015 Catalog.indb 133 12/26/14 10:50 AM

134

Plumbing

GHD Order Desk(907) 279-66911-800-478-4393

2192 VIKING DRIVEANCHORAGE, AK 99501

GENERAL HARDWAREDISTRUBUTORSwww.ghdalaska.com


Pipe Threading Machines120V, 1-1/2 HP in-duction motor. Two-speed gear-box, reverse/off/forward motor con-trol. Hammer-type chuck with replace-able rocker-action jaw inserts. Oil through die head. Includes 2-1/2" – 4" receding self-open-ing die head, 1/4" – 2" universal self-

opening die head, re amer, cutter, set of 1/2" – 3/4" dies, set of 1" – 2" dies, set of 2-1/2" – 4" dies, gallon bottle of Nu-Clear oil, three hex wrenches, spare cutter wheel, 3/4" com-bination wrench, tool box and four oz. can of white thread sealant. Stand not included.

Mfg.No.

OrderNo.

ModelNo.

Pipe Cap.In. NPT

Wt.Lbs.

26092/1224 RIG26092 1224 1/2 - 4 509

Pipe Threading Machines

115V 1/2 HP reversible motor. Automatic oil-ing, self-priming oil pump. Operates at 36 or 54 RPM. Speed chuck with rocker-action jaws grip and center workpiece. Length gauge for quick cut-off. Integrated foot switch. 1/8" – 2" pipe thread capacity. UL, CSA approved. Uni-versal die head, reamer, cutter, 1/2" – 3/4" die set, 1" – 2" die set, gallon bottle of Nu-Clear oil, four hex wrenches, spare cutter wheel and four oz. can of white thread sealant.

Mfg. No. Order No. Desc.93287/535M RIG93287 Machine w/ standard accesories

Pipe Threader Stands

RIG92462

RIG92467

Mfg. No. Order No. Desc.92462/150A RIG92462 Wheel & tray stand92467 RIG92467 Wheel & cabinet stand

Pipe Threading MachinesCompact

115V, 1/2 HP reversible motor. Self-contained oil system. Lightweight with integrated foot switch. UL, CSA approved. Includes fold-up wheel stand, quick open die head, reamer, cutter with cutter wheel, 1/2" – 3/4" die set, 1" – 2" die set, gallon bottle of Nu-Clear oil and four oz. can of white thread sealant.

Threading Machines

Mfg. No.Order

No.Pipe Cap.In. NPT

67182/300COMPAC RIG67182 1/2 – 2Accessories

Mfg. No.Order

No.Model

No. Desc.

97075/845 RIG97075 815A1/8" – 2" NPT self-

openingRH die head

97065/841 RIG97065 811A 1/8" – 2" NPT quick-open RH die head

51005/819 RIG51005 819 Nipple chuck, 1/2" – 2" NPT

51020/D380 RIG51020 D380 Nipple chuck wrench

44715/E1666X RIG44715 E1666X Jaw insert set

Pipe Threading MachinesPower Drive — #300

115V, 1/2 HP reversible motor w/ foot switch. Includes collapsable tripod stand, carriage with lever, Model 341 reamer, Model 360 cutter, die head and dies, two-wheeled trans-porter, oiler and gallon bottle of cutting oil.

Mfg.No.

OrderNo.

PipeCap. In.

RodCap. In.

Max.GearedCap. In.

15682/300 RIG15682 1/8 – 2 1/4 – 2 6

Pipe Threading Machine Accessories

RIG26132Mfg.No.

OrderNo. Desc.

26132/711 RIG26132 1/4" – 2" NPT, universalself-opening RH die head

26192 RIG26192 2-1/2" – 4" NPT pipe die

Pipe Dies

For use in universal die head models 504A, 711, 713, 811A, 815A, 816, 817 and 842. Right-hand thread.

Mfg. No. Order No. Cap. In.Alloy

47745/U1234 RIG47745 1/2 - 3/447750/U12 RIG47750 1 - 2

High-Speed47765 RIG47765 1/2 - 3/447770 RIG47770 1 - 2

2015 Catalog.indb 134 12/26/14 10:50 AM

135

Plumbing




Pipe ThreadersPortable Power Drive

Heavy-duty, handheld power drive. Alumi-num casing; 115V, 1/2 HP reversible motor. Model 700.

Pipe Threaders

Mfg.No.

OrderNo.

PipeCap. In.

RodCap. In.

Max.GearedCap. In.

41935/700 RIG41935 1/8 – 2 1/4 – 1 6

RIG42620

RIG42625Model 700 Accessories

Mfg. No. Order No. Desc.42620/774 RIG42620 Square drive adapter42625/775 RIG42625 Support arm

Pipe Threader Accessories

RIG61122

RIG19366

RIG42405

For Model 141 and 161 geared threaders. Allows threading of 4" and 6" diameter pipe.

Mfg. No. Order No. Desc.#840A/61122 RIG61122 Universal drive shaft758/19366 RIG19366 Loop844/42405 RIG42405 Drive bar

Geared Threaders

Features jaw clutch to prevent jamming, cam-type work holder, fully enclosed gear-ing, and simple adjustment for tapered or straight threads. For right-hand only.

Mfg.No.

OrderNo.

Nominal Pipe Cap. In.

141/36620 RIG141 2-1/2 – 4

Pipe Threader Dies

For Model 141 geared pipe threaders. 2-1/2" to 4" NPT.

Mfg. No.

OrderNo. Desc. TPI

38120 RIG38120 High-speed, right-hand 8

Ratcheting Threader SetsExposed

Includes die heads, ratchet assembly, ratchet handle and alloy dies. NPT pattern.

Threader SetsMfg. No.

OrderNo.

ModelNo.

Cap.In.

36475 RIG36475 12-R 1/2 - 2

Pipe Threader Ratchetsw/ Handle

Die heads snap in from both sides and lock in place. Features knob with forward and re-verse action.

Mfg. No. Order No. For Die Head No.37777 RIG37777 11-R30118/12R RIG30118 12-R

Pipe ThreadersRatcheting Die Heads

Alloy construction. Right hand thread.Model 12-R. Exposed ratchet threaders. Die head locks into ratchet assembly and re-moved by pulling out ratchet knob.

Mfg. No. Order No. Cap. In.37390/12-R RIG37390 1/237395/12-R RIG37395 3/437400/12-R RIG37400 137405/12-R RIG37405 1-1/437410/12-R RIG37410 1-1/237415/12-R RIG37415 2

Pipe Threader Dies

RIG37825-RIG37850: For Model OO-R, 111-R, 12-R, O-R, 11-R, 30A or 31A pipe threaders. Alloy construction. NPT pattern, right-hand thread.RIG37870-RIG37895: High-speed Right Hand thread design; creates NPT threads.Note: Dies can be reversed in die head for close to wall threading.

Mfg. No. Order No. Pipe Size In. TPIRegular

37825 RIG37825 1/2 1437830 RIG37830 3/4 1437835 RIG37835 1 11-1/237840 RIG37840 1-1/4 11-1/237845 RIG37845 1-1/2 11-1/237850 RIG37850 2 11-1/2

High Speed 37870 RIG37870 1/2 1437875 RIG37875 3/4 1437880 RIG37880 1 11/1/237895 RIG37895 2 11-1/2

2015 Catalog.indb 135 12/26/14 10:50 AM

136

Plumbing

GHD Order Desk(907) 279-66911-800-478-4393




Pipe VisesLightweigt Tripod

Features aluminum legs, overlapping hinges and a raised edge on bottom tray. Adjustable tray clamp. Comfort grip at carring point for easy transport.

Mfg. No. Order No. Pipe Cap. In. Wt. Lbs.02307/R450GB REE02307 1/8 – 4 27.6

Chain VisesTristand®

Legs and tray fold away for portabil-ity. Large vise overhangs front legs for clear tool movement. Features storage space for hang-ing tools, pipe rest, three pipe benders and ceil-ing brace screws.

Mfg. No. Order No. Cap. In. Wt. Lbs.36273/72037 RIG36273 1/8 – 6 47

Pipe VisesTristand®

Portable design has large base for clear tool swing, slots for hanging tools, pipe rest, three-pipe benders, ceiling brace screw, “quick grab” self-lock-ing latch, and carrying handle.

Mfg. No. Order No. Pipe Cap. In. Wt. Lbs.16703 RIG16703 1/8 to 2-1/2 32

Chain VisesTop Screw

Bench-mountable. Crank attached to top of vise. Cast-iron frame, steel jaws. Includes pipe rest and bender.

Mfg. No. Order No. Cap. In.40185/BC210 RIG40185 1/8 – 2-1/240195/BC410 RIG40195 1/8 – 440210/BC610 RIG40210 1/4 – 6

Pipe Stands

V-head design. Adjustable height range 28" to 52".

Mfg.No.

OrderNo.

PipeCap. In.

Max.Load Lbs.

56662/VJ-99 RIG56662 12 2500

Pipe StandsModel RJ-99

Roller head high pipe stand for use with threading machines, roll groovers and simi-lar equipment. Adjustable height range 32" to 55".

Mfg.No.

OrderNo.

Max.Pipe Cap.In.

Max Wt. Cap. Lbs.

56672/RJ-99 RIG56672 12 2500

Oilers

Hand-operated with ergonomic two-finger trigger design that reduces user fatigue. Die cast, heavy duty body with swivel nozzle with no exposed parts for longer life. Heavy duty reservoir pan measures 14-1/2" dia. x 8-1/2" deep. Integral molded body eliminates leaks at the hose-reservoir connection. Hose length 54".

Mfg. No. Order No. Desc.10883/418 RIG10883 w/ 1 gal. thread cutting oil,

bucket with removable chip tray

72342/402 RIG72342 w/ attachment for 1 & 5 gal.containers

Thread Cutting Oils

Cools threads and pipe. Free of chlorine and other halogens, PCBs and heavy metals. Low-odor, anti-mist formula.Nu-Clear Oil. Clear mineral oil with low odor and anti-mist formulation. Special low tem-perature properties maintain workable vis-cosity to -20°F.Dark Oil. Traditional mineral oil with low odor and anti-mist formulation.

Mfg. No. Order No. SizeNu-Clear

06110/OQC REEOQC 1 qt.70835 RIG70835 1 gal.

Dark41590 RIG41590 1 qt.70830 RIG70830 1 gal.41600 RIG41600 5 gal.

2015 Catalog.indb 136 12/26/14 10:50 AM

137

Plumbing




Pipe WrenchesAluminum

Mfg. No. Order No. Lgth. In. Cap. In.31090/810 RIG31090 10 1-1/247057/812 RIG47057 12 231095/814 RIG31095 14 231100/818 RIG31100 18 2-1/231105/824 RIG31105 24 331110/836 RIG31110 36 531115/848 RIG31115 48 6

Pipe WrenchesCast Iron

Mfg. No. Order No. Lgth. In. Cap. In.31000/PW6 RIG31000 6 3/431005/PW8 RIG31005 8 131010/PW10 RIG31010 10 1-1/231015/PW12 RIG31015 12 231020/PW14 RIG31020 14 231025/PW18 RIG31025 18 2-1/231030/PW24 RIG31030 24 331035/PW36 RIG31035 36 531040/PW48 RIG31040 48 6

Pipe WrenchesOffset

Aluminum handle.Mfg. No. Order No. Lgth. In. Cap. In.31120 RIG31120 14 231125 RIG31125 18 2-1/231130 RIG31130 24 3

Hex Wrenches

Provides multi-sided grip on all hex nuts, square nuts, unions and valve packing nuts.

Mfg. No.

OrderNo. Desc.

Lgth.In.

Cap.In.

31305 RIG31305 Offset 9-1/2 1-1/2 – 2-1/231275/17 RIG31275 Straight 14-1/2 5/8 – 1-1/4

Spud Wrenches

Features narrow jaws for use in tight work spaces. Toothless design compatible with square or rectangular stock.

Mfg. No. Order No. Length In. Cap. In.31400 RIG31400 12 3/8 to 2-5/8

Pipe Wrench Parts

Mfg.No.

OrderNo.

WrenchModels Pipe

Cap. In.Straight End

Hook Jaws31580 RIG31580 8 E-8 1

31605 RIG31605 10 E-10 1-1/2

31630 RIG31630 12 E-12 / E-14 2

31655 RIG31655 14 E-14 2

31670 RIG31670 18 E-18 2-1/2

31695 RIG31695 24 E-24 3

31720 RIG31720 36 E-36 5

31745 RIG31745 48 E-48 6

31770 RIG31770 60 E-60 8

Heel Jaw & Pin Assemblies31585 RIG31585 10 E-10 1-1/2

31610 RIG31610 10 E-10 1-1/2

31635 RIG31635 14 E-14 2

31675 RIG31675 18 E-18 2-1/2

31700 RIG31700 24 E-24 3

31725 RIG31725 36 E-36 5

31750 RIG31750 48 E-48 6

31775 RIG31775 60 E-60 8

Spring Assemblies31590 RIG31590 8 E-8 1

31620 RIG31620 10 E-10 1-1/2

31640 RIG31640 12 E-12 2

31660 RIG31660 14 E-14 2

31680 RIG31680 18 E-18 2-1/2

31705 RIG31705 24 E-24 3

31730 RIG31730 36 E-36 5

31755 RIG31755 48 E48 6

Nuts

31595 RIG31595 8 E-8 1

31615 RIG31615 10 E-10 1-1/2

31645 RIG31645 12 E-12 2

31665 RIG31665 14 E-14 2

31685 RIG31685 18 E-18 2-1/2

31710 RIG31710 24 E-24 3

31735 RIG31735 36 E-36 5

31760 RIG31760 48 E-48 6

31785 RIG31785 60 E-60 8

Pipe WrenchesAluminum

Mfg. No. Order No. Size In.APW14 GRNAPW14 14APW18 GRNAPW18 18APW24 GRNAPW24 24

Pipe WrenchesSteel

Mfg. No. Order No. Size In.PW8 GRNPW8 8PW10 GRNPW10 10PW14 GRNPW14 14PW18 GRNPW18 18PW24 GRNPW24 24

Pipe Wrench Sets4 Piece

Heavy duty pipe wrenches are capable of providing plenty of torque when you need it. Adjustable precision-milled jaws provide a secure grip, and steel construction provides for a long service life. Set of four wrenches.

Mfg. No. Order No. Wrench Lgth. In.W1136 WIM11136 8, 10, 14, 24

2015 Catalog.indb 137 12/26/14 10:50 AM

138

Plumbing

GHD Order Desk(907) 279-66911-800-478-4393




Pipe Wrench SetsInternal

Four-piece set removes broken, threaded ends of pipe, pipe plugs and fittings. For open or closed end wrenches.

Mfg. No. Order No. Sizes In.139-4 GEN139-4 3/8, 1/2, 3/4, 1

Socket Wrench SetsPlumbers'

Designed to facilitate the removal and instal-lation of recessed valve stems. Socket set fits 10 of the most common plumbing nut sizes. Includes handle and storage clip.

Mfg. No. Order No. Desc.511-1510 LDR89787 Socket wrench set

Nipple Extractors

For installation and removal of chrome nip-ples. Stainless steel construction.

Mfg. No. Order No. Conn. In. IPS511-1940 LDR17925 1/2

Plumbers’ Wrenches4-in-1

For use on slip nuts and large sink strainer locknuts.Mfg. No. Order No. For Nut Size In.511-1220 LDR89777 1-1/4, 1-1/2 & 2

Locknut WrenchesAdjustable

For use on drain connections, sink strainers, toilet connections and other large nuts.

Mfg. No. Order No. Jaw Cap. In.511-1210 LDR89772 1 to 3

Stem KeysFour-Way

Fits square stems. Includes vinyl storage pouch.

Mfg. No. Order No. Sizes In.151-015 BNK151015 1/4, 9/32, 5/16, 11/32

Sillcock Keys

For valve stems with square broach. Die-cast construction.

Mfg. No. Order No. Desc.500-1403 LDR19425 Sillcock key

Torque Wrenches

Preset for No Hub® soil pipe installation. In-sures proper coupling tightness for strong, leak-free joints. Drive tightens until wrench clicks for 60 in/lb. torque.

Mfg. No. Order No. Drive Size In. Wt. Lbs.31410/902 RIG31410 5/16 1/2

Chain Wrenches

Double fast jaw gives fast, ratchet-like action in either direction. Perfect for use on round, square, or irregular shapes.Light-Duty: Features one-piece forged alloy steel handle and jaw. Ideal for use in close quarters.Heavy-Duty: Replaceable steel jaws.

Mfg.No.

OrderNo.

Pipe Cap. In. ChainLgth. In.Rated Actual

Light-Duty

31310/C12 RIG31310 2 4 15-3/4

Heavy-Duty

31315/C14 RIG31315 2 5 18-1/2

31320/C18 RIG31320 2-1/2 5 20-1/4

31325/C24 RIG31325 3 5 20-1/4

31330/C36 RIG31330 4-1/2 7-1/2 29

2015 Catalog.indb 138 12/26/14 10:50 AM

139

Plumbing




Strap Wrenches

Strong, woven nylon strap gives tight grip. Polyurethane-coated strap prevents marring. Best for polished pipe.

Strap Wrenches

Mfg.No.

OrderNo.

Cap. In. Strap Dim. In. L x WPipe Tube

31340/2 RIG31340 2 3-1/2 17 x 1/-1/8

31360/5 RIG31360 5 7 29-1/4 x 1-3/4

Replacement StrapsMfg. No. Order No. Strap Dim. In. L x W

32055/E5259 RIG32055 48 x 1-3/4

Basin Wrenches

Forged alloy steel construction with spring-loaded jaws. Allows fast, one-handed ratch-eting. Telescopic body adjustable for longer reach. Tension plug holds head in any posi-tion up to 90°.

Mfg. No. Order No. Lgth. In. Cap. In.31175/1017 RIG31175 10 – 17 1-1/4 – 2-1/2

Ratchet WrenchesThru-Bolt™

4-in-1 sockets on one wrench in a dog bone configuration. 1-1/4, 1-1/8, 1-1/16 and 15/16" sockets are designed to stay on the handle, meaning no loose sockets. Rugged con-struction, smooth grip handle with a forward/reverse lever. Ideal for water, sewer and gas installations and maintenance.

Mfg. No. Order No. Socket Size In.L4N1/02690 REE02690 1-1/4, 1-1/8, 1-1/16, 15/16

Plastic Nut Basin Wrenches

Designed to reach and turn plastic mount-ing nuts on faucets, sprayers and ballcocks. Notched ends are designed to self-center on 2, 3, 4, and 6-tab nuts and to fit metal and plastic 1" hex nuts. Ideal for tight clearance pedestal sinks.

Mfg. No. Order No. Lgth. In.66807/2001 RIG66807 10-1/4

Faucet Nut Wrenches

Provides firm grip on smooth surfaces at any angle.

Mfg.No.

Order No.

For NutSize In.

HandleLgth. In.

511-1110 LDR89767 1/2 to 1-1/8 11

Street Keys

Steel construction with vinyl covered comfort handle. Unlocks water meter. Rebar shaft and handle for greater strength.Mfg. No. Order No. Lgth. In.610-8000 LDR04534 36

Copper Tubing Cutters12V — Cordless

Features close quarter rotating cutting head to cut in confined spaces, automatic adjustment from 3/8" – 1", auto locking mechanism, water resistant sealed metal cutter head, battery fuel gauge, and built-in LED light. TOOL ONLY.

Mfg. No. Order No. RPM

Cap. In. OD

2471-20 MIL2471-20 500 1/2 – 1-1/8

Tubing CuttersQuick Release

Cut copper, aluminum, light wall steel, and stainless steel tubing. Use alternate wheels to cut a wide variety of plastic pipe and tub-ing. Also features built-in reamer and spare cutter wheel in the knob.

Mfg. No. Order No. Pipe Cap In.03416 REETC16Q 1/4 – 1-5/803420 REETC2Q 1/4 – 2-5/803430 REETC3Q 3/8 – 3-1/203440 REETC4Q 1-7/8 – 4-1/2

Replacement Cutter WheelsMfg. No. Order No. Pkg. Qty.63375 REE63375 2

Tubing CuttersScrew Feed

Produces clean, square cuts in copper, brass, aluminum and thin-wall conduit. In-cludes fold-away reamer.Mfg. No. Order No. Cap. In.32910/10 RIG32910 1/8 – 132920/15 RIG32920 3/16 – 1-1/832930/20 RIG32930 5/8 – 2-1/8

2015 Catalog.indb 139 12/26/14 10:50 AM

140

Plumbing

GHD Order Desk(907) 279-66911-800-478-4393




Tubing CuttersQuick-Acting

Features I-beam construction with hardened surfaces. RIG31632 & RIG31642. Include fold-away reamer.

Mfg. No. Order No. Cap. In.31632/151 RIG31632 1/4 – 1-5/831642/152 RIG31642 1/4 – 2-5/831652/154 RIG31652 1-7/8 – 4-1/2

Tubing CuttersEnclosed Feed

RIG31622

RIG33055

For use on copper, brass, aluminum and thin wall conduit. Grooved rolls for close-to-flare cuts. Enclosed feed screw prevents clogging and jamming. Includes fold-away reamer, spare cutter wheel in handle.RIG33055: Ratcheting cutter with quick-act-ing mechanism.

Mfg. No. Order No. Cap. In.31622/150 RIG31622 1/8 – 1-1/833055/205 RIG33055 1/4 – 2-3/8

Spring Loaded CuttersC Cutter™

Easy-to-grip cutter easily snaps on to copper tubing for a quick, clean cut. Just turn the cutter in the direction of the arrow and the cut will be complete in seconds. Compact c-shape means no handle swing space is required. The spring-loaded cutter wheel self-feeds on Type K, L, and M copper with consistent pressure as the tool is turned around the tubing. Each cutter fits one popular size of copper tubing.

Mfg. No. Order No. Cap. In.

03405 REE03405 1/2

03407 REE03407 3/4

03409 REE03409 1

Tubing CuttersMidget

For use on copper, aluminum, brass and plastic tubing in areas with limited clearance. Features knurled feed screw knob for improved control. RIG40617 In-cludes spare cutting wheel.

Mfg. No. Order No. Cap. In.40617/101 RIG40617 1/4 – 1-1/832975 RIG32975 1/8 – 5/832985/104 RIG32985 3/16 – 15/16

Midget Tubing CuttersSelf Feeding—Model 118

Designed for use in restricted spaces on small diameter, hard and soft copper, alu-minum, brass, and plastic tubing. Strong, lightweight slide and wheel housing, large

knurled feed screw knob gives easy control of cutting pressure for clean cuts. Includes a self-feeding cutter wheel that automatically cuts after tightening the knob only once.

Mfg. No. Order No. Cap. In.86127 RIG86127 1/4 to 1-1/8

Tubing CuttersMini

For copper, aluminum, brass and thin wall tubing. Fits in spaces with clearances as small as 1-1/4". Large knob for greater torque.Mfg.No.

OrderNo.

Tubing Dia. In.

123R GEN123R 1/8 to 5/8

Tubing CuttersStandard

Replaceable steel cutting wheel. Reamer re-tracts for safety when not in use. For copper, aluminum and thin wall tubing.Mfg. No. Order No. Tubing Dia. In.120 GEN120 1/8 to 1-1/8

Tubing Cutters

Features die-cast body and hardened steel rollers and cutting wheel. For use on copper, aluminum and plastic tubing.

Mfg. No. Order No. For Tubing OD In.511-3120 LDR89807 3/16 to 1-1/8

Tubing CuttersHeavy-Duty

Two flare groove rollers and retractable steel reamers. For copper, aluminum and thin wall tubing.Mfg. No. Order No. Tubing Dia. In.125 GEN125 1/4 to 1-1/2

2015 Catalog.indb 140 12/26/14 10:50 AM

141

Plumbing




Plastic Pipe/Tubing Cutters

Hardened steel blade produces clean cuts with easy one-hand operation. For use on plastic or rubber tubing and pipe.

Mfg. No. Order No. Cap. In.23498/RC-1625 RIG23498 1/8 – 1-1/223493/PC-1375 RIG23493 1/8 – 1-1/2

Plastic Pipe/Tubing Cutters

Hardened steel blade produces clean cuts with easy one-hand operation. For use on plastic or rubber tubing and pipe.

Mfg. No. Order No. Cap. In.23498/RC-1625 RIG23498 1/2– 1-5/823493/PC-1375 RIG23493 1/8 – 1-1/225588 RIG25588 Replacement blade

Pipe CuttersPVC

Durable aluminum construction for heavy duty use. Ergonomic grips reduce the amount of hand force needed to cut through hard ma-terials, and are spaced at 1/2" increments to act as a quick pipe measuring scale. Fea-tures X-CEL® quick change blade allowing the user to switch blades in seconds.

Mfg. No. Order No. Cap. In.30088/RC2375 RIG30088 1/2 – 2-3/8

Pipe Cutters

For cutting PVC pipe, hose and synthetic tubing. Ratchet action design.Mfg. No. Order No. Cap. In.511-5500 LDR01789 1-1/2

Soil Pipe Cutters

For use on clay, cast-iron, asbestos and cement pipes, as well as 4" class 22 water mains. Ratchet operates parallel to pipe for use in narrow

trenches. Features protective hand guard.Mfg. No. Order No. Cap. In.32900/246 RIG32900 1-1/2 – 6

Soil Pipe Cutters

One-stroke cutting of 2" to 6" service weight, No Hub® soil pipe, clay, asbestos and cement pipe.

Mfg. No. Order No. Cap. In.74207/276 RIG74207 1-1/2 – 6

In-Place Soil Pipe CuttersModel 226

Compact, lightweight de-sign for use against walls and in other close quar-ters. Cuts hub and No-Hub® soil and concrete, cast iron and clay pipe. Unique tool chain latch-ing mechanism allows maximum versatility.

CapacitiesPipe Pipe Size In.Type Standard MaximumClay 1-1/2 to 6 1-1/2 to 15

No-Hub® Cast Iron 1-1/2 to 6 1-1/2 to 8Service Wt. Cast Iron 1-1/2 to 6 1-1/2 to 8

Concrete 4 to 6 4 to 6Extra Heavy Soil 2 to 5 2 to 5

Pipe CuttersMfg. No. Order No. Desc.69982/226 RIG69982 Model 226 in-place soil

pipe cutter

Pipe CuttersHeavy-Duty

Industrial quality steel body with long han-dle allows for easy adjustments. Extra long shank protects adjustment threads. Convert-ible to three-wheel cutter by replacing rollers. Cuts steel, ductile iron, copper, PVC, etc. Fast and clean pipe cutting by hand or power.

Mfg. No. Order No. Cap. In.32820/2A RIG32820 1/8 – 2

Tubing Cutter Wheels

Made from high shock-resistant tool steel. Reed cutter wheels can be made thinner and can therefore cut pipe more easily and leave less burrs. Engineered for long life and maxi-mum cutting accuracy.

Mfg. No. Order No. Use With Cutter No.2PK-2RBS/63612 REE63612 1A, 2A, 42A, 202, 360,

820, 364

2PK-2RBHD/63613 REE63613 1A, 2A, 42, 202, 260, 820, 364, 732

2PK-OSS/63655 REE63655 10, 15, 20

2PK-OCSST/63659 REE63659 151CSST

2PK-O/63660 REE63660 10, 15, 20

2PK3040/63665 REE63665 30, 40, 106, 108, 109, 133, 134, 136

2PK-345T/63666 REE63666 101, 103, 104, 105, 118, 150, 131

2PK-R2588/63670 REE63670 106, 108, 133, 134, 136, 154

2PK-30-40SS/63671

REE63671 TC3Q; TC4Q; TC5Q; TC6Q; TC8Q

2PK-OP2/64180 REE64180 31637, 31647

2PK-30P40P REE64190 30-40P, 106, 108, 109P, 134P

2015 Catalog.indb 141 12/26/14 10:50 AM

142

Plumbing

GHD Order Desk(907) 279-66911-800-478-4393




Pipe Cutter Wheels

Precision-machined from high-grade steel and engineereed for long life and maxiumum cutting accuracy.

Mfg.No.

OrderNo.

Use WithCutter No.

For Steel & Ductile Iron Pipe

33125/F229 RIG33125 3S, 4S, 44S, 466C/S/HWS, 468C/S/HWS, 472C/S/HWS, 764

33100/F514 RIG33100 1A, 2A, 42A, 202, 230,820/364, 732

33120/F515 RIG33120 3S, 4S, 44S, 466C/S/HWS, 468C/S/HWS, 472C/S/HWS, 764

44185/E1032 RIG44185 1A, 202, 2A, 360, 42A, 732,

820/364

Aluminum & Copper

33170 RIG33170 30, 40, 106, 133, 134, 154P

PVC, ABS, Std. Wall Tubing

33195/E5272 RIG33195 131P/151P, 132P/152P, 205P

Tubing Cutter Wheels

Made from tempered, bearing tool steel for smooth, exact pipe cuts. Slim-line surface geometry ensures fewer inner surface burrs and less chance for outer surface distortion. Will cut easily through copper, aluminum, brass and thin-wall stainless steel.

Mfg. No. Order No. Fits Pkg. Qty.RW121-2 GENRW121-2 All General tools

tubing cutters2

Pipe ReamersRatchet

Self-feeding spiral design. Not for use with power drives.

Mfg. No. Order No. Cap. In.34955/2S RIG34955 1/4 – 2

Inner-Outer Reamers

For ID reaming and OD beveling of water tubing. Plastic with alloy steel blades. For use on cop-per, aluminum, brass and other types of tubing.

Mfg. No. Order No. Cap. In.34965/127 RIG34965 1/4 – 1-1/2

Pipe Reamersfor Plastic

Quickly remove pipe and solvent cement res-idue. Reduce labor time and materials costs by eliminating need to replace sections of Sch. 40 PVC and CPVC pipe. Fits standard 1/2" drills. Four-sided carbide insert, extra cutting edge with a 180° rotation.

Mfg. No. Order No. Cap. In.PPR150/04524 REEPPR150 1-1/2PPR200/04525 REEPPR200 2PPR300/04526 REEPPR300 3PPR400/04527 REEPPR400 4

Flaring ToolsRatchet

Large ratcheting feed screw handle, hard-ened steel flaring cone. For flaring steel, stainless steel, hard copper and brass tubing through .035" thick.

Mfg. No. Order No. Tubing Size In.83037/458R RIG83037 1/8, 3/16, 1/4, 5/16, 3/8, 3/4

Flaring Tools

For producing 45° flares in soft copper, brass, aluminum and mild steel tubing. Cre-ates either single or double lap flares. A single clamp screw provides for easy clamp-ing and removal of tubing. Fits tubing sizes 3/16", 1/4", 5/16", 7/16", 1/2" and 5/8".

Mfg. No. Order No. Desc.23332 RIG23332 Standard flaring tool33927/345-DL RIG33927 Kit w/ tubing cutter & case

2015 Catalog.indb 142 12/26/14 10:50 AM

143

Plumbing




gFlaring Tools

Screw yoke fits on bar without removing wing nuts. 4-1/2" sliding T-handle. Fits 3/16", 1/4", 5/16", 3/8", 7/16", 1/2" and 5/8" tubing.

Mfg. No. Order No. Desc.151 GEN151 Standard, cast-iron yoke

Flaring ToolsHammer-Type

Made of high-grade, hardened steel. Long nose guide creates smooth, uniform 45° flares. For use with water tubing.

Mfg. No. Order No. Tube Size In.41330/E47 RIG41330 3/441335/E52 RIG41335 1

Tubing BendersTri-Bender

Designed to easily bend three different sizes of soft tubing: 1/4", 5/16" and 3/8" with the same tool. Ideal for plumbing and HVAC ap-plications. 90° start angle minimizes errors. Includes angle mark references.

Mfg. No. Order No. Cap. In.44852/456 RIG44852 1/4, 5/16, 3/8

Tubing BendersLever Style

For use on copper, steel and stainless steel tubing. 90° start angle and oil-absorbing shoe minimize bending effort. Features offset cushion-grip handles for 180° bends.

Mfg.No.

OrderNo.

TubeSize In.

BendRadius In.

Wt.Lbs.

36097/406 RIG36097 3/8 5/16 2.636132/408 RIG36132 1/2 1-1/2 5.4

Pipe BendersManual Hydraulic

Simple manual operation for ease of use. Six bending dies included standard. Rotat-ing stand locks in three positions for stabil-ity and versatility. Heavy duty hydraulic cyl-inder capable of bending schedule 40 pipe. Completely manual so external power is not needed.

Mfg. No. Order No. Capacity In.331900 JET331900 1/2 – 2331910/JHPB-30 JET331910 1/2 – 3

Tubing BendersSteel Spring

Easily bends soft copper, aluminum and oth-er thin-wall tubing.Mfg. No. Order No. OD Tube Size In.

100-38 GEN100-38 3/8100-12 GEN100-12 1/2

Cleaning Brushes4-in-1

High carbon steel brushes for cleaning 1/2" and 3/4" copper tube and fittings. Carded.

Mfg. No. Order No. Desc.31407 OTY31407 4-In-1 cleaning brush

Cleaning BrushesFitting

For cleaning inside tube and pipe fittings. Steel wire bristles. Mfg. No. Order No. I.D. In.511-4140 LDR10866 1/2511-4150 LDR10867 3/4

Abrasive Cloths

For plumbing joints.Mfg. No. Order No. Width In. Lgth. Ft.511-4310 LDR10874 1-1/2 15

Solder Wires

Mfg. No. Order No. Dia. In. Desc.1 Lb. Spool

21212 OTY21212 .093 Electrical rosin core21018 OTY21018 .125 Gen. purpose solid wire

21115 OTY21115 .125 Non-electronic acid core

29025 OTY29025 .093 Lead-free solid wire1/2 Lb. Spool

50429 OTY50429 .125 Non-electronic acid core50490 OTY50490 .125 Gen. purpose solid wire53064 OTY53064 .093 Lead-free solid wire

2015 Catalog.indb 143 12/26/14 10:50 AM

144

Plumbing

GHD Order Desk(907) 279-66911-800-478-4393




Liquid FluxesWater-Soluble

Cleans and fluxes. Formulated with strong cleaning agent, no need to clean oxidized copper. Ensures fast and effective sol-dering. Lead-free and can be used for HVAC applications.

Mfg. No. Order No. Wt. Oz.30106 OTY30106 4

Solid Wire SoldersAquabond® — Lead-Free

OTY53061 OTY53062

Mfg. No. Order No. Dia. In. Wt. Oz.53061 OTY53061 .062 153062 OTY53062 .093 4

Acid Core SoldersNon-Electronic

OTY53011 OTY53015


Rosin Core SoldersLeaded

For wiring stereos, motors, appliances and auto batteries. 60/40 tin/lead formula. Fea-tures rosin flux in wire core; no external flux needed. Melting range 361°F to 460°F. Non-corrosive and non-conductive flux residue.Note: Contains lead; cannot be used on drinking water lines. Mfg. No. Order No. Dia. In. Wt. Oz.53023 OTY53023 .063 150678 OTY50678 .063 8

Rosin Core SoldersAll Purpose Electrical

OTY53012 OTY53016


SoldersInstant

Solders and Fluxes at same time. Lead-free, can be used on potable water lines.

Mfg. No. Order No. Wt. Oz.53019 OTY53019 1-1/2

Solder PasteNo. 5 Paste Flux

100% lead-free. For use on all metal except aluminum, magnesium and stainless steel. Removes surface oxidation.

Mfg. No. Order No. Wt. Oz.30011 OTY30011 1.730013 OTY30013 430014 OTY30014 853017* OTY53017 1.7

* Includes brush.

Solvent CementsABS — Black

Medium-bodied black cement for use on ABS pipes up to 6" diameter. Acceptable temperature range 40°F to 100°F. Meets ASTM standards.

Mfg. No. Order No. Wt. Oz.30999 OTY30999 430889 OTY30889 830892 OTY30892 1630902 OTY30902 32

Solvent CementsPVC — Clear

Regular-bodied. For use on pipes up to 4" diameter. Acceptable temperature range 40°F to 100°F. Meets ASTM standards.

Mfg. No. Order No. Wt. Oz.31012 OTY31012 431013 OTY31013 8

2015 Catalog.indb 144 12/26/14 10:50 AM

145

Plumbing




Solvent CementsAll-Purpose

Medium-bodied milky clear cement for ABS, PVC or CPVC pipes up to 6" diameter. Recom-mended for Schedule 40 and 80 pipe fitings, potable water, pres-sure pipe, gas conduit and DWV. Acceptable temperature range 40°F to 100°F. Meets ASTM standards.

Mfg. No. Order No. Wt. Oz.30818 OTY30818 430821 OTY30821 830834 OTY30834 16

PVC CementsRain-R-Shine®

Blue color with medi-um body. For use on PVC pipe and fittings up to 6" diameter, in-cluding Schedule 40 and 80, potable water pipes, pressure pipes, gas pipes, conduit and DWV. Apply at 40-100°F. Fast-setting; suitable for use in wet conditions or where quick pressurization is

needed. Meets ASTM D-2564. Note: Requires no primer when used on non-pressure DWV.


CleanersAll-Purpose

Clear. For all sched-ules and diameters of ABS, PVC and CPVC pipes and fittings.

Mfg. No. Order No. Wt. Oz.30779 OTY30779 4

Primer/Cleaners

Purple tinted primer/cleaner for use on PVC pipes. Removes dirt while softening pipe for solvent ce-ment application.


Pipe Joint Compounds

Non-hardening paste for use on water, steam or air lines. Non-toxic, non-separating. Gray.Note: Not for use on plastic threads. Mfg. No. Order No. Wt. Oz.31226 OTY31226 131228 OTY31228 8

Thread Sealantsw/ Teflon®

For use with air con-ditioning, temperature sending and hydraulic fittings. Seals and re-sists pressure in air, oil, diesel fuel, hydrau-lic systems. Pliable at temperatures from -65°F to 300°F.

Mfg. No. Order No. Wt. Oz.14H/80632 PER80632 4

14D/80633 PER80633 16

Thread SealantsSlic-Tite with Teflon®

Angled brush in cap. Use on metal, PVC, CPVC, ABS pipe threads with water, air, gas, ammonia, oil or refrigerants. Not for use on oxygen pipes. Non-toxic, non drying. Temper-ature range -50ºF to 500ºF. Max pressures 3000 PSI for gas, 10,000 PSI for liquids.Mfg. No. Order No. Size Pt.42019 MKL42019 1/2

Plumber’s Putties

Stainless setting compound for frames, fau-cets and sinks. Stays flexible; will not shrink. Meets mil. spec. TT-P-1536A. Note: Not for use on marble, granite, limestone or plastic.Mfg. No. Order No. Size No.31166 OTY31166 14

2015 Catalog.indb 145 12/26/14 10:50 AM

146

Plumbing

GHD Order Desk(907) 279-66911-800-478-4393




Thread Sealing TapeSlic-tite®

High density PTFE pipe thread sealing tape. Suitable with solvents, chemicals, oxygen and on food lines. Non-toxic. Meets Mil. Spec T-27730A. Sealing temperature: -450°F to 550°F. Pressures: to 2,000 PS.

Mfg. No.

OrderNo.

WidthIn.

Lgth. In.

ThickMil. Color

44072 MKL44072 1/2 520 4 White44075 MKL44075 3/4 520 4 White44078 MKL44078 1 520 4 White

Thread Sealing Tape Stic-tite® — Gas Line — Yellow

High density PTFE thread sealing tape. Suitable with solvents, chemicals, oxygen and on food lines. Non-toxic. Meets Mil. Spec T-27730A. Sealing tem-perature: -450°F to 550°F (-268°C to

288°C). Pressures: to 2,000 PSI (136 BAR). Gasline yellow.

Mfg. No.

OrderNo.

WidthIn.

Lgth. In.

ThickMil. Color

44094 MKL44094 1/2 260 4 Yellow

Pipe Thread SealantsTeflon®

For lubrication and sealing of ta-pered pipe thread connections, including plastic. Tube includes hang hole.

Mfg. No. Order No. Wt. Oz.090-2050 LDR12694 1

Gasket Sets

Plumbing repair gasket set. Includes 1 rub-ber, 1 cork, and 1 high temperature resistant material sheet.

Mfg. No. Order No. Size. In.510 7000 LDR710900 6 x 6

Pipe Thawers

Thaw frozen pipes. Four voltage settings. Wide range of outputs for various pipe sizes, lengths and types. Lightweight at 34 lbs. 1/0 cable for fast thaw time and less heat build-up. Built-in heat sensor cycles transformer preventing overloads. Built-in circuit breaker limits amperage draw.

Mfg. No. Order No. Amps VoltsUES 200 D-PT UES200D 15 115

Drain Cleaners

For use with 3/8" and 1/2" cables. Cable spins at 190 RPM. Holds 100 ft. of 3/8" or 75 ft. of 1/2" cable. Includes operator’s gloves, coupling pin, 50 ft. x 3/8" C-31 cable, bulb auger, spade cutter and “C” cutter. CSA ap-proved.

Mfg.No.

OrderNo.

ModelNo.

LineDia. In.

26993/K-400 RIG26993 K-380 1-1/2 - 4

Drain CleanersAuto-Spin Sink Machine

Features two-way auto-feed cable with guide hose for hard to reach areas. Rust-resistant housing includes integrated handle with au-to-feed holder and foot bulb controlled on/off switch. 115V, 1.1 Amps. CSA approved.

Mfg. No.

Order No. RPM

Cable Dim.Dia. x Lgth.

LineCap. In.

34963 RIG34963 450 1/4 x 30 3/4 to 1-1/2

Drain Cleaners Power

Handheld unit for use on 3/4" to 1-1/2" drain lines. Slide-action chuck. Variable speed. In-cludes carrying case.

Mfg. No. Order No. Cable Dim. In. W x L RPMK-45AF-1 RIG35998 5/16 x 25 0-500

Drain CleanersHand Spinner

KWIK-SPIN® with patented AUTOFEED®

trigger automatically feeds and retracts the 1/4" MAXCORE® cable as the drum turns. Light-duty, for use on small drain lines in showers, sinks, and tubs.

Mfg. No.

OrderNo.

ModelNo.

Cable Dim. In. W x L

41348 RIG41348 K-SPIN 1/4 x 25

Drum Augers

Features spring steel auger and high-impact plastic body.

Mfg. No. Order No. Auger Dia. In. Auger Lgth. Ft.512-1130 LDR71125 1/4 25

Drain CleanersCloset Augers

Bulb head design. Durable, kink-resistant 1/2" compression-wrapped inner core cable. Vinyl guard to protect porcelain.

Mfg. No. Order No. Lgth. Ft.59787/K3 RIG59787 3

2015 Catalog.indb 146 12/26/14 10:50 AM

147

Plumbing




Closet AugersModel K6

Allows fast, safe clearing of obstructions. Features bulb head, 1/2" compression-wrapped cap. Inner core cable, large er-gonomic handle and vinyl guard to protect porcelain surfaces. Telescopes for additional reach.

Mfg. No. Order No. Length Ft.59797 RIG59797 6

Spring AugersDrain/Toilet Auger

Drain Auger

Toilet Auger

Drain Augers. Features spring wire con-struction with spiral head. Includes handle.

Mfg. No. Order No. Dia. In. Lgth. Ft.Drain Augers

512-1315 LDR77465 1/4 15

512-1325 LDR77470 1/4 25

512-1425 LDR77480 3/8 25

512-1450 LDR35942 3/8 50Toilet Augers

512-1220 LDR77495 3/8 3

Sewer RodsFlat

Features spiral head. Includes storage rack.

Mfg. No. Order No. Rod Dim. In. Rod Lgth. Ft.

512-2250 LDR77510 1/2 x 1/16 50

Sewer TapesFlat

Includes carrier. Spear point at one end, roll-er ball at other. 100 ft. length.

Mfg.No.

OrderNo.

WidthIn.

Thick.In.

LineCap. In.

62545/E2727 RIG62545 1/2 1/16 3/4 - 1-1/262605/E2739 RIG62605 3/4 1/8 4 - 6

Drain Cleaning Cables Sectional

For use with Ridgid Drum Machines.

Mfg. No. Order No. Desc.5/16" Wide Cable

62225/C-1 RIG62225 25 ft. cable w/ bulb auger

56782/C-1 IIC RIG56782 25 ft. inner core cablew/ bulb auger

62235/C-2 RIG62235 25 ft. cable w/ drop head auger

56787/C-2 IC RIG56787 25 ft. inner core cable w/ drop head auger

89400/C-21 RIG89400 50 ft. cable w/ bulb auger3/8" Wide Cable

62250/C-5 RIG62250 35 ft. cable w/ bulb auger62260/C-6 RIG62260 35 ft. cable w/ male coupling

87577/C-3 IW RIG87577 50 ft. integral wound solid core cable

37847/C-32 RIG37847 75 ft. inner core cable1/2" Wide Cable

37862/C-45 RIG37862 75 ft. inner core cable5/8" Wide Cable

62265/C7 RIG62265 7-1/2 ft. tight wind cable

62270/C8 RIG62270 7-1/2 ft. all-purpose wind cable

3/4" Wide Cable41212/C-75 RIG41212 75 ft. inner core cable

Drain CleanerAccessories

RIG92515, RIG92520

RIG62995

RIG63065

RIG63005

RIG63010

RIG63035

RIG5920, RIG59225

RIG62870

For us with drain cleaner model K-750.

Mfg. No. Order No. Desc.92515/T-412 RIG92515 2-1/2" double cutter92520/T-413 RIG92520 3" double cutter62995/T-202 RIG62995 1-1/8" OD bulb auger63065/T-217 RIG63065 4" drop head auger63005/T-205 RIG63005 “C” cutter63010/T-206 RIG63010 3" funnel auger63035/T-211 RIG63035 1-3/8" spade cutter59230/A-13 RIG59230 Pin key for 3/8" cable59225/A-12 RIG59225 Pin key for 1/2" cable62870/T-105 RIG62870 2-1/2" grease cutter

2015 Catalog.indb 147 12/26/14 10:50 AM

148

Plumbing

GHD Order Desk(907) 279-66911-800-478-4393




Pipe ElbowsPush Fit Fittings

Push fit brass elbow. Lead free, full flow design. Fast, trouble-free wet or dry instal-lation on copper or PEX tubing. Removable and reusable with optional disconnect clip (BNK13881/2).

Mfg. No. Order No. Size In.631-003HC BNK13860 1/2631-004HC BNK13861 3/4


Push fit MPT brass elbow.. Lead free, full flow design. Fast, trouble-free wet or dry in-stallation on copper or PEX tubing. Remov-able and reusable with optional disconnect clip (BNK13881/2).

Mfg. No. Order No. Size In.631-203HC BNK13868 1/2


Push fit FPT brass elbow.. Lead free, full flow design. Fast, trouble-free wet or dry instal-lation on copper or PEX tubing. Removable and reusable with optional disconnect clip (BNK13881/2).

Mfg. No. Order No. Size In.631-303HC BNK13869 1/2

Pipe Elbows90 Degree

Mfg. No. Order No. Size In.Black Iron Pipe

520-003HN GRI40614 1/2520-004HN GRI40615 3/4520-005HN GRI40616 1

Galvanized Pipe510-001HN GRI40500 1/4510-002HN GRI40501 3/8510-003HN GRI40502 1/2510-004HN GRI40503 3/4510-005HN GRI40504 1510-008HN GRI40507 2

Galvanized Iron Elbows45-Degree

Zinc coated for potable water and drainage ap-plications only. Meets ASTM and ASME stan-dards. Female threaded connec tion.

Mfg. No. Order No. Dia. In.510-204HN GRI40517 3/4

Pipe Elbows90 Degree Street




Pipe Tees

Mfg. No. Order No. Size In.

Black Iron Pipe

520-603HN GRI40648 1/2

520-604HN GRI40649 3/4

520-605HN GRI40650 1

Galvanized Pipe

510-601HN GRI40536 1/4

510-602HN GRI40537 3/8

510-603HN GRI40538 1/2

510-604HN GRI40539 3/4

510-605HN GRI40540 1

Pipe TeesPush Fit Fittings

Full flow design. Lead free, brass construc-tion. Fast, trouble-free wet or dry installa-tion on copper or PEX tubing. Removable and reusable with optional disconnect clip (BNK13881/2)

Mfg. No. Order No. Size In.01 BNK13871 1/202 BNK13872 3/4

2015 Catalog.indb 148 12/26/14 10:51 AM

149

Plumbing




Pipe CouplingsPush Fit Fittings

Lead free, brass repair coupling. Fast, wet or dry installation on copper or PEX tubing. Re-movable and reusable with optional discon-nect clip (BNK13881/2).


CouplingsPush Fit Fittings

Lead free, brass coupling. Fast, wet or dry installation on copper or PEX tubing. Remov-able and reusable with optional disconnect clip (BNK13881/2).


Pipe AdaptersPush Fit Fittings

Lead free, brass push fit male pipe thread adapter. Fast, wet or dry installation on cop-per or PEX tubing. Removable and reusable with optional disconnect clip (BNK13881/2).


Pipe AdaptersPush Fit Fittings

Lead free, brass push fit female pipe thread adapter. Fast, trouble-free wet or dry installation on copper or PEX tubing. Removable and reus-able with optional disconnect clip (BNK13881/2).

Mfg. No. Order No. Size. In.630-203HC BNK13855 1/2 x 1/2630-204HC BNK13856 3/4 x 3/4

Pipe Nipples

Mfg. No. Order No. Size In. x Lgth. In.

Black Iron Pipe

583-001HN GRI99275 1/2 x close

583-020HN GRI99277 1/2 x 2

583-030HN GRI99279 1/2 x 3

583-040HN GRI99281 1/2 x 4

583-050HN GRI99283 1/2 x 5

583-060HC GRI99285 1/2 x 6

583-180HC GRI99453 1/2 x 18

583-240HC GRI99454 1/2 x 24

583-300HC GRI99455 1/2 x 30

583-360HC GRI99456 1/2 x 36

583-480HC GRI99457 1/2 x 48

583-600HC GRI99458 1/2 x 60

584-001HC GRI99289 3/4 x close

584-020HN GRI99291 3/4 x 2

584-030HN GRI99293 3/4 x 3

584-040HN GRI99295 3/4 x 4

584-050HN GRI99297 3/4 x 5

584-060HN GRI99299 3/4 x 6

584-180HC GRI99459 3/4 x 18

584-240HC GRI99460 3/4 x 24

584-300HC GRI99461 3/4 x 30

584-360HC GRI99462 3/4 x 36

584-480HC GRI99463 3/4 x 48

584-600HC GRI99464 3/4 x 60

585-001HN GRI99303 1 x close

585-020HN GRI99304 1 x 2

585-040HN GRI99308 1 x 4

685-060HN GRI99312 1 x 6

585-180HC GRI99465 1 x 18

585-240HC GRI99466 1 x 24

585-300HC GRI99467 1 x 30

585-360HC GRI99468 1 x 36

585-480HC GRI99469 1 x 48

585-600HC GRI99470 1 x 60

Pipe Nipples

Mfg. No. Order No. Size In. x Lgth. In.Galvanized Pipe

561-001HN GRI99095 1/4 x close561-020HN GRI99097 1/4 x 2561-030HN GRI99099 1/4 x 3561-040HN GRI99101 1/4 x 4561-050HN GRI99103 1/4 x 5561-060HN GRI99105 1/4 x 6562-001HN GRI99109 3/8 x close562-020HN GRI99111 3/8 x 2562-030HN GRI99113 3/8 x 3562-040HN GRI99115 3/8 x 4562-050HN GRI99117 3/8 x 5562-060HN GRI99119 3/8 x 6563-001HN GRI99123 1/2 x close563-020HN GRI99125 1/2 x 2563-030HN GRI99127 1/2 x 3563-040HN GRI99129 1/2 x 4563-050HN GRI99131 1/2 x 5563-060HN GRI99133 1/2 x 6563-180HC GRI99495 1/2 x 18563-240HC GRI99496 1/2 x 24563-300HC GRI99497 1/2 x 30563-360HC GRI99498 1/2 x 36563-480HC GRI99499 1/2 x 48563-600HC GRI99500 1/2 x 60564-001HN GRI99137 3/4 x close564-020HN GRI99139 3/4 x 2564-030HN GRI99141 3/4 x 3564-040HN GRI99143 3/4 x 4564-050HN GRI99145 3/4 x 5564-060HN GRI99147 3/4 x 6564-180HC GRI99501 3/4 x 18564-240HC GRI99502 3/4 x 24564-300HC GRI99503 3/4 x 30564-360HC GRI99504 3/4 x 36564-480HC GRI99505 3/4 x 48564-600HC GRI99506 3/4 x 60565-001HN GRI99151 1 x close565-020HN GRI99152 1 x 2565-030HN GRI99154 1 x 3565-040HN GRI99156 1 x 4565-050HN GRI99158 1 x 5565-060HN GRI99160 1 x 6565-180H GRI99507 1 x 18565-240HC GRI99508 1 x 24565-300HC GRI99509 1 x 30565-360HC GRI99510 1 x 36565-480HC GRI99511 1 x 48565-600HC GRI99512 1 x 60567-001HN GRI99177 1-1/2 x close567-020HN GRI99178 1-1/2 x 2567-030HN GRI99180 1-1/2 x 3567-040HN GRI99182 1-1/2 x 4567-050HN GRI99184 1-1/2 x 5567-060HN GRI99186 1-1/2 x 6567-080HN GRI99187 1-1/2 x 8568-001HN GRI99190 2 x close568-040HN GRI99194 2 x 4568-060HN GRI99198 2 x 6

2015 Catalog.indb 149 12/26/14 10:51 AM

150

Plumbing

GHD Order Desk(907) 279-66911-800-478-4393




Pipe Floor FlangesGalvanized

Mfg. No. Order No. Size In.511-603HN GRI40606 1/2511-604HN GRI40607 3/4511-605HN GRI40608 1

Pipe Bell Reducers


521-343HN GRI40697 3/4 x 1/2521-353HN GRI40698 1 x 1/2521-354HN GRI40699 1 x 3/4

Galvanized Pipe511-321HC GRI40587 3/8 x 1/4511-332HC GRI40588 1/2 x 3/8511-342HC GRI40589 3/4 x 3/8511-343HC GRI40590 3/4 x 1/2511-354HC GRI40592 1 x 3/4511-375HC GRI40594 1-1/2 x 1511-387HC GRI40596 2 x 1-1/2511-331HN GRI30928 1/2 x 1/4511-374HN GRI99419 1-1/2 x 3/4

Dielectric Unions

Prevents electrolysis or galvanic action when connecting dissimilar materials. Male pipe thread. For use with water up to 210°F. ANSI B1.20.1 compliant.

Mfg. No. Order No. Size In.167-004NL BNK167004 3/4

Pipe Couplings




Pipe Unions



Galvanized Pipe511-705HN GRI40559 1

Pipe Hex Reducer Bushings

Black Iron Pipe Galvanized Pipe


521-954HN GRI40705 3/4 x 1/2521-953HN GRI40706 1 x 1/2521-955HN GRI40707 1 x 3/4

Galvanized Pipe511-921HC GRI40597 3/4 x 1/4511-932HC GRI40598 1/2 x 3/4511-943HC GRI40599 3/4 x 1/2511-931HC GRI30933 1/2 x 1/4511-942HC GRI30937 3/4 x 3/8511-953HC GRI40600 1 x 1/2511-954HC GRI40601 1 x 3/4511-965HC GRI40602 1-1/4 x 1

Pipe Hex Reducer Bushings

GRI40705 GRI40598 Black Galvanized


521-954HC GRI40705 3/4 x 1/2521-953HC GRI40706 1 x 1/2521-955HC GRI40707 1 x 3/4

Galvanized Pipe511-921HC GRI40597 3/4 x 1/4511-932HC GRI40598 1/2 x 3/4511-943HC GRI40599 3/4 x 1/2511-931HC GRI30933 1/2 x 1/4511-942HC GRI30937 3/4 x 3/8511-953HC GRI40600 1 x 1/2511-954HC GRI40601 1 x 3/4511-964HC GRI30934 1-1/4 x 3/4511-965HC GRI40602 1-1/4 x 1511-973HC GRI30939 1-1/2 x 1/2511-974HN GRI30940 1-1/2 x 3/4511-975HN GRI30941 1-1/2 x 1511-985HN GRI40604 2 x 1511-987HN GRI40605 2 x 1-1/2

2015 Catalog.indb 150 12/26/14 10:51 AM

151

Plumbing




Pipe Caps

Mfg. No. Order No.Size In.

Black Iron Pipe521-403HN GRI40675 1/2521-404HN GRI40676 3/4521-405HN GRI40677 1

Galvanized Pipe511-402HN GRI40564 3/8511-403HN GRI40565 1/2511-404HN GRI40566 3/4511-405HN GRI40567 1

Pipe CapsPush Fit Fittings

Brass push fit cap. Lead free. Fast, trouble-free wet or dry installation on copper or PEX tubing. Removable and reusable with option-al disconnect clip (BNK13881/2).


Pipe Plugs


521-803HN GRI40681 1/2521-804HN GRI40682 3/4

Galvanized PIpe511-801HN GRI40571 1/4511-802HN GRI40572 3/8511-803HN GRI40573 1/2511-804HN GRI40574 3/4511-805HN GRI40575 1511-808HN GRI40578 2

Test Plugs

Large wing nut, rubber gasket. Galvanized steel flanges.

Mfg. No. Order No. Valve Size In.154-007 BNK154007 1-1/2154-008 BNK154008 2154-010 BNK154010 3154-011 BNK154011 4

Pipe Straps

Galvanized pipe straps.

Mfg. No. Order No. Size In.610 3210 LDR11510 1/2610 3220 LDR11525 3/4610 3230 LDR11495 1

Disconnect ClipsPush Fit Fittings

Push fit disconnect clip. Removes push fit fit-tings from copper, PVC, and PEX tubing.


Plumbers’ TapesGalvanized

3/4" x 10 ft. galvanized tape. 26-gauge. Flex-ible metal strip with series of holes running the length of tape. Provides mechanical sup-port for piping.

Mfg. No. Order No. Desc.517002/PLUMBERS NOR00099 Plumbers' tape

NOTES________________________________________________________________________________________________________________________________________________________________________________________________________________________________

2015 Catalog.indb 151 12/26/14 10:51 AM

152

Plumbing

GHD Order Desk(907) 279-66911-800-478-4393




Boiler Drains

Brass body, neoprene seal disc and cast iron handle. 1/2 MPT x 3/4 hose thread. 1/2 male thread (1/2 copper sweat) inlet.

Mfg. No. Order No. Valve Dim. In.102-003 BNK102003 1/2

Hose BibsBrass

3/4" hose threads. Pipe and hose threads comply with ANSI standards.Mfg. No. Order No. Valve Size In.103-003 BNK103003 1/2103-004 BNK103004 3/4

Gate ValvesBrass

125 PSI WSP steam. 200 PSI non-shock WOG. Cast iron handle. Threads and solder comply with ANSI standards.

Mfg. No. Order No. ValveSize In.100-003 BNK100003 1/2100-004 BNK100004 3/4100-005 BNK100005 1

Ball ValvesPush Fit Fittings

Push fit brass ball valve. Lead free. Fast, trouble-free wet or dry installation on copper or PEX tubing. Removable and reusable with optional disconnect clip (BNK13881/2).

Mfg. No. Order No. Valve Size. In.107-063HC BNK10520 1/202 BNK10521 3/4

Gas Ball ValvesFull Port

600 PSI non-shock WOG. 150 PSI WSP steam. Forged brass, suitable for use with flammable liquids, temperature range -40°F to 350°F. CSA, UL listed. Meets ANSI/NSF and Federal standards.

Mfg. No.

OrderNo.

ValveSize In.

PortSize In.

107-001 BNK107001 1/4 0.315107-002 BNK107002 3/8 0.394107-003 BNK107003 1/2 0.590107-004 BNK107004 3/4 0.787107-005 BNK107005 1 0.984

Gas Ball Valves

For use with natural, manufactured, mixed, liquefied petroleum and LP gas/air mixtures. Heavy forged brass construction with hard chrome plated forged brass ball. Two-piece body. CSA certified.Mfg. No. Order No. Conn.In.020-1513 LDR04157 1/2 I.P.S.020-1514 LDR04158 3/4 I.P.S.

Gas Ball Valves

Brass, heavy duty construction. For gas ap-pliance installations. C.S.A. approved.Mfg. No. Order No. Conn. In.020-1560 LDR04168 3/8 x 3/8 Male Flare

Shutoff ValvesCompression

Mfg. No. Order No. Conn. In. OD508-156-4 LDR16571 1/4 x 1/4508-156-6 LDR16569 3/8 x 3/8

2015 Catalog.indb 152 12/26/14 10:51 AM

153

Plumbing




Shutoff ValvesStraight

Features Celcon® stem and chrome-plated metal body.Mfg. No. Order No. Conn. In.507-6101 LDR10564 3/8 Comp x 3/8 FIP

Shutoff ValvesAngled

LDR10566

LDR10568

Features Celcon® stem and chrome-plated metal body.

Mfg. No. Order No. Conn. In.507-5101 LDR10566 3/8 Comp x 1/2 FIP507-5202 LDR10568 3/8 Comp x 5/8 Comp

Gas Line ConnectorsFlexible

For use on water heaters, dryers, and space heaters. Stainless steel construction. 1/2" F.I.P. x 1/2" M.I.P. CSA listed.

Mfg. No. Order No. Lgth. In.3/8" O.D. (1/4" I.D.)

509-1036SS LDR10284 361/2" O.D. (3/8" I.D.)

509-1136SS LDR01895 36

Gas Line ConnectorsFlexible

Use with furnaces, ovens, ranges, and boil-ers. Coated for extra protection. 15/16" con-nection nuts. 5/8" O.D. (1/2" I.D.) tube size. 3/4" F.I.P. to 3/4" F.I.P. end fittings.

Mfg. No. Order No. Lgth. In.509-1524SSC LDR40567 24509-1548SSC LDR40570 48

Faucet Supply Lines

Connects kitchen and lavatory faucet to shut-off valve. Reinforced nylon construction.

Mfg. No. Order No. Lgth. In.3/8" Comp. x 1/2" F.I.P.

507-F3116 LDR86849 16

507-F3120 LDR32832 20507-3136 LDR16574 36

1/2" Comp. x 1/2" F.I.P.507-F3212 LDR86852 12507-F3220 LDR02146 20

Connector HosesPush Fit Fittings

18" female pipe thread connector hose and 3/4" push fitting. Removable and reusable.

Mfg. No. Order No. Valve Size In.W034SS105018 BNK00057 3/4

Faucet Supply LinesStainless Steel – Reinforced

For connecting faucet to shutoff valve. Flexi-ble braided design; will not kink, burst or rust. 3/8" female compression x 1/2" FIP connec-tions.

Mfg. No. Order No. Lgth. In.

Flagged w/ Self-Stick Label

507-F4120 LDR32838 20

507-F4116 LDR17945 16

Water Supply Connectors

For water heater or water softener hookup. Flexible copper construction with brass nuts and dielectric insulators. 3/4" FIP connec-tions. IAPMO listed.

Mfg.No.

Order No.

Max. PSI@ 40 to 180°F

Lgth.In.

509-2118 LDR59185 125 18

2015 Catalog.indb 153 12/26/14 10:51 AM

154

Plumbing

GHD Order Desk(907) 279-66911-800-478-4393




Toilet Supply LinesPlastic

For connecting toilet to shutoff valve. Flexible nylon-reinforced construction resists kinking. Includes 7/8" plastic ball cock nut.

Mfg. No. Order No. Conn.In. Lgth.In.

507-F3412 LDR32847 3/8 OD x 7/8 BC 12

Toilet Supply LinesStainless Steel – Reinforced

Connects toilet to shutoff valve. Braided de-sign; will not kink, burst or rust. Includes fe-male ball cock nut.

Mfg. No. Order No. Conn. In. Lgth. In.

507-F4412 LDR32842 3/8 OD x 7/8 BC 12

Copper Tubings

Copper refrigeration tube.

Mfg. No. Order No. Dia. In. Lgth. Ft.3/8"X50 COPPER COP3850 3/8 501/2"X50 COPPER COP1250 1/2 50

514-0410C LDR29291 1/4 10514-0610C LDR29294 3/8 10514-0810C LDR29297 1/2 10

Vinyl TubingBraided — Nylon Reinforced

Clear. Packaged on cardboard spool.Mfg.No.

Order No.

Dim. In.ID x OD

Lgth.Ft.

515-B5001S LDR14674 1/4 x 1/2 250515-B5002S LDR14681 3/8 x 5/8 150515-B5003S LDR14698 1/2 x 3/4 100515-B5004S LDR14704 5/8 x 7/8 75515-B5005S LDR14711 3/4 x 1 75515-B5006S LDR14728 1 x 1-3/8 50

Vinyl TubingFlexible

Plasticized polyvinyl chloride construction. Clear. Packaged on cardboard spool.

Mfg.No.

Order No.

Dim. In.ID x OD

Lgth.Ft.

515-C1003S LDR14537 1/8 x 3/16 400515-C1004S LDR14544 3/16 x 5/16 300515-C1006S LDR14551 1/4 x 3/8 250515-C1009S LDR14568 5/16 x 7/16 200515-C1011S LDR14575 3/8 x 9/16 100515-C1016S LDR14582 1/2 x 5/8 100515-C1020S LDR14599 5/8 x 3/4 100515-C1024S LDR14605 3/4 x 1 75515-C1026S LDR14612 1 x 1-1/4 100

Polyethylene TubingFlexible

For chemical, venting, water line and refrig-eration applications. Milky white. Packaged on cardboard spool.

Mfg.No.

Order No.

Dim. In.ID x OD

Lgth.Ft.

515-P2003S LDR14643 .170 x 1/4 400

515-P2006S LDR14650 1/4 x 3/8 300

515-P2007S LDR14667 3/8 x 1/2 200

Latex TubingPre-Cut

Latex tubing ideal for many hobby applica-tions. Resilient, tear resistant construction.

Mfg.No.

OrderNo.

Dim. In.ID x OD

Lgth.Ft.

516 L145 LDR35539 1/4 x 3/8 5

NOTES________________________________________________________________________________________________________________________________________________________________________________________________________________

2015 Catalog.indb 154 12/26/14 10:51 AM

155

Plumbing




Hose FittingsBrass

LDR10786 LDR10784

LDR10793 LDR10788

Mfg. No. Order No. Conn. In.Male

504-2110 LDR10786 3/4 MHT x 3/4 MIP or 1/2 FIP

504-2120 LDR10784 3/4 MHT x 1/2 MIPFemale

504-2210 LDR10793 3/4 FHT x 1/2 MIP

504-2230 LDR10788 3/4 FIP x 3/4 MHT

Hose FittingsSwivel — Brass

LDR10791

LDR1079 6

LDR10792

Mfg. No. Order No. Conn. In.504-2410 LDR10791 3/4 FHT x 1/2 FIP

504-2420 LDR10796 3/4 FHT x 3/4 FIP

504-2430 LDR10792 3/4 FHT x 3/4 FHT

Inlet HosesWashing Machine

Stainless steel reinforced high pressure hose. Features 3/4" FHT brass hose swivels. Braided.

Mfg. No. Order No. Lgth Ft.504-1225 LDR01786 6

Inlet HosesHigh Pressure

For use in washing machines connections. Features 3/4" FHT brass hose swivels.

Mfg. No. Order No. Lgth. Ft.504-1200 LDR37625 6

Drain HoseWashing Machine

Y-shaped mixer hose features two female and one male fittings.Mfg. No. Order No. Fitting Size In.504-1400 LDR37680 3/4

Hose Caps

Easy to install, watertight closure for thread-ed water supply outlets. Female hose thread. Includes washer.Mfg. No. Order No. Size In.504-2510 LDR10797 3/4

Hose AdaptersDual Thread

Converts male (15/16" x 27) or female (55/64" x 27) aerators to 3/4" male hose thread or 15/16" x 27 male aerator thread.Mfg. No. Order No. Desc.500-2050 LDR70855 Dual thread hose adapter

Hose BarbsFemale

Mfg. No. Order No. Conn. In.508-140-6-4 LDR05500 3/8 ID x 1/4 FIP508-140-8-6 LDR05503 1/2 ID x 3/8 FIP

Hose BarbsMale

Hose barb x male pipe.

Mfg. No. Order No. Conn. In.508-139-12-12 LDR05492 3/4 ID x 3/4 MIP.

508-139-4-2 LDR05483 1/4 ID x 1/8 MIP.508-139-4-4 LDR10967 1/4 ID x 1/4 MIP.508-139-4-6 LDR10968 1/4 ID x 3/8 MIP.508-139-5-2 LDR22465 5/16 ID x 1/8 MIP.508-139-5-4 LDR05485 5/16 ID x 1/4 MIP.508-139-6-4 LDR10969 3/8 ID x 1/4 MIP.508-139-6-6 LDR10971 3/8 ID x 3/8 MIP.508-139-8-12 LDR05488 1/2 ID x 3/4 MIP.508-139-8-6 LDR10972 1/2 ID x 3/8 MIP.508-139-8-8 LDR10973 1/2 ID x 1/2 MIP.

2015 Catalog.indb 155 12/26/14 10:51 AM

156

Plumbing

GHD Order Desk(907) 279-66911-800-478-4393




Hose BarbsDouble

Hose barb end x hose barb end.

Mfg. No. Order No. I.D. In.508-138-4 LDR10962 1/4508-138-5-5 LDR05480 5/16508-138-6 LDR10963 3/8508-138-8 LDR10964 1/2

Compression Nuts

For compressed air, gasoline, grease, oil, vacuum, and water line applications. Use with hard and soft copper tubing and flexible vinyl tubing.

Mfg. No. Order No. O.D. In.508-61-4 LDR10882 1/4508-61-6 LDR10883 3/8508-61-8 LDR10884 1/2

Compression Sleeves


Mfg. No. Order No. O.D. In.508-60-4 LDR10877 1/4508-60-6 LDR10878 3/8508-60-8 LDR10879 1/2

Compression AdaptersMale — Tubing x Male Pipe


Mfg. No. Order No. Conn. In.508-68-4-4 LDR10909 1/4 OD x 1/4 MIP508-68-6-4 LDR16546 3/8 OD x 1/4 MIP508-68-6-6 LDR10911 3/8 OD x 3/8 MIP508-68-6-8 LDR10912 3/8 OD x 1/2 MIP508-68-8-6 LDR10913 1/2 OD x 3/8 MIP508-68-8-8 LDR10914 1/2 OD x 1/2 MIP

Compression FittingsUnion — Tubing x Tubing


Mfg. No. Order No. O.D In.508-62-5 LDR05331 5/16508-62-6-4 LDR05336 3/8 x 1/4508-62-8-6 LDR05337 1/2 x 3/8

Compression UnionsTubing x Tubing

For compressed air, gasoline, grease, oil, vacuum, and water line applications. Use with hard and soft copper tubing and flexible vinyl tubing.Mfg. No. Order No. O.D. In.508-62-4 LDR10887 1/4508-62-6 LDR10888 3/8508-62-8 LDR10889 1/2508-62-10 LDR10891 5/8

Compression TeesTubing x Tubing x Tubing

For compressed air, gasoline, grease, oil, vacuum, and water line applications. Use with hard and soft copper tubing and flexible vinyl tubing.Mfg. No. Order No. O.D. In.508-64-4 LDR10892 1/4508-64-6 LDR10893 3/8508-64-8 LDR10894 1/2

Tubing Inserts & Sleeves

For reinforcing plastic tubing when used with compression fittings. Includes two delrin sleeves and two brass inserts.Mfg. No. Order No. For Tubing OD In.508-760-4 LDR10958 1/4508-760-6 LDR10959 3/8508-760-8 LDR10961 1/2

2015 Catalog.indb 156 12/26/14 10:51 AM

157

Plumbing




Flare Unions

For use on gasoline, oil, grease, natural gas, refrigeration, air conditioning and com-pressed air lines, and flexible copper tubing. Can be assembled or disassembled without damaging joint.Mfg. No. Order No. Conn. In. OD x OD508-42-6 LDR10932 3/8 x 3/8

508-42-8 LDR10933 1/2 x 1/2

508-42-8-6 LDR16551 1/2 x 3/8

Flare PlugsFemale

For gasoline, grease, oil, natural gas, liquid petroleum, refrigeration, air conditioning, and compressed air line applications. Use on flexible copper tubing.Mfg. No. Order No. O.D. In.508-57-4 LDR14963 1/4

508-57-6 LDR16568 3/8

508-57-8 LDR16541 1/2

Flare NutsShort

For use on gasoline, oil, grease, natural gas, refrigeration, air conditioning and com-pressed air lines, and flexible copper tubing. Can be assembled or disassembled without damaging joint.

Mfg. No. Order No. Conn. In. OD508-41-4 LDR10926 1/4

508-41-6 LDR10927 3/8

508-41-8 LDR10928 1/2

Flare Adapters

Male Female


Mfg. No. Order No. Conn. In.Male

508-48-6-4 LDR16554 3/8 OD x 1/4 MIP508-48-6-6 LDR10946 3/8 OD x 3/8 MIP508-48-6-8 LDR10947 3/8 OD x 1/2 MIP508-48-8-6 LDR10948 1/2 OD x 3/8 MIP

Female508-46-8-8 LDR10941 1/2 OD x 1/2 FIP

Flare ElbowsMale

For gasoline, grease, oil, natural gas, liquid petroleum, refrigeration, air conditioning, and compressed air line applications. Use on flexible copper tubing. Mfg. No. Order No. Conn. In.

508-49-6-4 LDR05295 3/8 OD x 1/4 MIP.508-49-6-6 LDR05286 3/8 OD x 3/8 MIP.508-49-6-8 LDR05296 3/8 OD x 1/2 MIP.508-49-8-6 LDR05298 1/2 OD x 3/8 MIP.508-49-8-8 LDR05288 1/2 OD x 1/2 MIP.

Flare ElbowsFlare x Flare

For gasoline, grease, oil, natural gas, liquid petroleum, refrigeration, air conditioning, and compressed air line applications. Use on flexible copper tubing.

Mfg. No. Order No. O.D. In.508-55-6 LDR16566 3/8

Flare Tees


Mfg. No. Order No. Conn. In. OD

508-44-6 LDR16557 3/8 x 3/8 x 3/8

Brass Swivel NutsFemale Flare x Female Flare

Use for gasoline, grease, oil, natural gas, liq-uid petroleum, refrigeration, air conditioning, and compressed air lines. Use on flexible copper tubing.

Mfg. No. Order No. Size In.508 39SW-8 LDR22457 1/2 x 1/2

CapsMale

For gasoline, grease, oil, natural gas, liquid petroleum, refrigeration, air conditioning, and com-pressed air line applications. Use on flexible copper tubing.

Mfg. No. Order No. O.D In.

508-56-4 LDR05311 1/4

508-56-6 LDR10923 3/8

508-56-8 LDR10924 1/2

2015 Catalog.indb 157 12/26/14 10:51 AM

158

Plumbing

GHD Order Desk(907) 279-66911-800-478-4393




Sink Strainer AssembliesBasket Type

LDR13489

LDR10673

For kitchen sink applications. Stainless steel construction.

Mfg. No. Order No. For Drain Open. In.501-1200 LDR13489 3-1/2 to 4501-2200 LDR10673 Universal fit

Drain StoppersRubber

LDR10657

LDR10653

LDR10668LDR10657: For sinks, basins and laundry tubs. Includes chrome ring for chain attach-ment.LDR10653: Tub stopper with chain.LDR10668: Flat design with suction seal. Universal fit.

Mfg. No. Order No. For Drain Open. In.501-4120 LDR10657 1-3/8 to 1-1/2501-4210 LDR10653 1-1/2 to 2501-4300 LDR10668 Up to 4

Faucet Repair Kits

LDR10602

LDR10608

LDR10608: Includes flat, beveled, fiber and hose washers, faucet packing and screws.

Mfg. No. Order No. Desc.500-4111 LDR10602 Assorted flat faucet washers500-4100 LDR10608 42-Pc. plumbing washer assortment

O-Ring Sets

For faucet and valve repair.

Mfg.No.

Order No.

Includes Sizes In.OD x ID

500-4130 LDR10603 37/64 x 19/64; 11/16 x 1/2, 15/16 x 13/16, 1 x 3/4

J-BendsFlexible

For correcting misalign-ments in kitchen, bath, anity or laundry applica-tions. Fits 1-1/4" to 1-1/2" connections. Polypropyl-ene construction.

Mfg. No. Order No. Desc.506-6002 LDR71400 Flexible J-bend

Sink Traps

For kitchen or bath repair applications. PVC construction. Includes 1-1/2" and 1-1/4" washers.

Mfg. No. Order No. Desc.506-6030 LDR47115 Repair trap

P-Traps

For kitchen or bath drain applications. PVC construction. Includes 1-1/2" and 1-1/4" washers.

Mfg. No. Order No. Desc.506-6041 LDR47105 P-Trap

Waste Arms

For use with center or end outlets. PVC con-struction. Slip connections.

Mfg. No. Order No. Dim.In.506-6110 LDR47140 1-1/2 x 15

Slip Joint CouplingsTwo-Way

PVC construction. Includes 1-1/2" and 1-1/4" washers.

Mfg. No. Order No. Desc.506-6310 LDR47160 Slip joint coupling

Slip Joint Elbows90° – Two-Way

PVC construction. Includes 1-1/2" and 1-1/4" washers.

Mfg. No. Order No. Desc.506-6300 LDR47180 90° Slip joint elbow

2015 Catalog.indb 158 12/26/14 10:51 AM

159

Plumbing




Waste Tees

For connecting double-bowl kitchen sinks. PVC construction with 1-1/2" slip connec-tions.

Mfg. No. Order No. Desc.506-6135 LDR47195 End outlet

Branch TailpiecesDishwasher

Hi-line design. Plastic construction. Branch features 1/2" IPS threads.


Sink TailpiecesFlexible

For connecting sink to drain; corrects misalignments up to 2". Accommodates basket strainers and male couplings. Polypropyl-ene construction. Includes nut and washer.

Mfg. No. Order No. Dim. In. Dia. x LDirect Connect

506-6205 LDR71415 1-1/2 x 12

Slip Joint506-6253 LDR71425 1-1/4 x 8506-6265 LDR71420 1-1/2 x 12

Extension TubesSlip Joint

PVC construction. Includes nut and washer.

Mfg. No. Order No. Dim. In. Dia. x L506-6264 LDR32281 1-1/2 x 12

Extension TubesPlain

PVC construction.


Sink TailpiecesFlanged

For connecting sink to drain. PVC construc-tion.Mfg. No. Order No. Dim. In.Dia. x L506-6206 LDR31972 1-1/2 x 12

Slip NutsPVC

Includes washers.

Mfg. No. Order No. Size In.506-6530 LDR47075 1-1/2

Tailpiece WashersFlanged

Polyethylene construc-tion. 3 per pkg.


Reducing WashersSlip Joint

Polyethylene construc-tion, beveled design. Re-duces 1-1/2-Inch to 1-1/4-Inch. 3 per package.

Mfg. No. Order No. Size In.506-6510 LDR10803 1-1/2 x 1-1/4

Slip Joint WashersRubber

Rubber Construction. Fits standard slip joint tubes.


Ball CocksAnti-Siphon

Non-Corrosive Delrin Construction. Features adjustable height from 8-Inch to 12-Inch. In-cludes float rod and flexible refill tube.

Mfg. No. Order No. Ht. In.503-1220 LDR13456 8 to 12

Adjustable Ballcocks

Includes adjustable anti-siphon fill valve with built in float, long life flapper with chain, sili-cone seal and refill tube.Mfg. No. Order No. Adjust In.503-1340 LDR31321 8 to 13

2015 Catalog.indb 159 12/26/14 10:51 AM

160

Plumbing

GHD Order Desk(907) 279-66911-800-478-4393




Toilet Tank Repair Kits

For rebuilding or upgrading of most toilet tank designs. Includes 9" anti-siphon ball cock with float rod, refill tube and flapper tank ball and guide.

Mfg. No. Order No. Desc.503 1310 LDR31967 Toilet tank repair kit

Toilet Tank Flappers

Fits most flush valves, provides positive seal. Rubber construction. Includes chain.

Mfg. No. Order No. Desc.503-2200 LDR10694 Toilet tank flapper

Toilet Flush ArmsHeavy-Duty

Fits all toilet tanks. Features heavy cast metal handle, brass rod, and metallic nut. Chrome finish.

Mfg. No. Order No. Desc.503-1850 LDR03972 Heavy-duty flush arm

Closet Bolt Sets

LDR32436 & LDR32757

LDR10731

For securing toilet bowl to floor flange. In-cludes bolts, nuts and washers.LDR10731: Also includes pair of 1/4" x 2-1/2" closet screws.

Mfg. No. Order No. Boltn Dim. In.503-3015 LDR32436 1/4 x 3-1/2503-3111 LDR32757 1/4 x 2-1/4503-3130 LDR10731 5/16 x 2-1/4

Toilet GasketsTank to Bowl

Universal fit. Provides positive seal between toilet tank and bowl.

Mfg. No. Order No. Desc.503-2391 LDR05871 Tank to bowl gasket

Tank to Bowl Connection Kits

Fits American Standard®, Briggs® and Uni-versal Rundle™ toilet tanks. Includes two brass bolt sets and sponge rubber washer.

Mfg. No. Order No. Desc.503-2330 LDR10737 Tank to bowl connection kit

Wax Bowl RingsHeavy-Duty

OTY31190

OTY31194

Pure petroleum wax gasket for use on any floor-type closet bowl. Meets mil. spec. TT-P-1536A. Fits 3" and 4" waste lines.

Mfg. No. Order No. Desc.31190 OTY31190 Wax bowl ring

31194 OTY31194 Wax bowl ring w/ polyethylene sleeve

2015 Catalog.indb 160 12/26/14 10:51 AM

Documents

ˆˇ˘ - AIH€¦ · ˜˚˜˛˝˜˙ˆˇ˘ ˛ ˆ˜˚˙ ˜ ˘ ˜ ˙ˆˇ aih order desk (907) 276-7201 ˙˙˙˙˙˙ 1-800-478-7201 order online today ships out tomorrow!