1. Product Name 2. Manufacturer - CMD Group · Tamper-proof grate lockdown 4. Technical Data Applicable Standards ... Deliver products in manufacturer’s original, unopened, undamaged

SANITARY WASTE PIPING SPECIALTIES 22 13 19

Sani-Floor, Inc.

SPEC-DATA® is a registered trademark of Reed Elsevier Inc. The ten-part SPEC-DATA format conforms to the editorial style of The Construction Specifications Institute and is used with their permission. The manufacturer is responsible for technical accuracy. ©2014 CMD. All Rights Reserved.

1. Product Name��Self-Washing® Floor Troughs��Clog-Free™ Floor Troughs��Standard Floor Troughs

2. ManufacturerSani-Floor, Inc. 9910 US 31 NorthEllsworth, MI 49729Phone: (231) 599-2930Fax: (231) 599-3137Email: [email protected]: www.sanifloor.com

3. Product DescriptionSani-Floor, Inc. is an innovator of commercial floor solutions, offering flexible, highly effective floor troughs and gratings for a wide range of applications.

Basic UseSani-Floor floor troughs are technologically advanced systems for effective straining of food debris in commercial kitchens. Sani-Floor's high-capacity floor troughs channel liquids through the strainers — eliminating dams and clogs and allowing water to flow freely to the underground building drain system. Designed to catch food solids and particulates as small as a grain of rice, the troughs increase sanitation, while reducing maintenance requirements and improving staff safety. Sani-Floor floor troughs are suited for commissaries of all types, including restaurants, bars, cafeterias, grocery stores, schools and universities, penitentiaries, military installations, and other areas in need of dependable drainage.

Types�� Self-Washing Floor Troughs include Sani-Floor's Clog-free™ Strainer Technology plus high-pressure spray nozzles that flush debris into the strainer and prevent particles from sticking to the sides of the troughs. Full-length strainers optimize performance �� Clog-Free Floor Troughs offer full-length strainers and Clog-free Strainer Technology without the self-washing features�� Standard Floor Troughs offer Clog-free Strainer technology, with strainers strategically located at the center or end of the trough. They are available in depths as low as 2" to 3"

Composition & Materials�� Floor modules are available in 12, 14 or 16 gauge 201 stainless steel; 304 or 316 is an option�� Full-length stainless steel strainers on the Self-Washing and Clog-free Floor Troughs have a 1/16" slotted opening pattern with handles for ease of removal and installation�� Grate walking surfaces are fiberglass-reinforced resin with an impregnated-aluminum-oxide anti-slip surface that provides an anti-fatigue benefit. Stainless steel subway grating is optional�� Self-Washing Floor Troughs include ready-to-install pressure modules, which are preassembled and leak-tested, single- or double-solenoid valve systems �� Self-Washing Floor Trough Pressure Modules include back-flow and check valves, Y strainer, shut-off valves and a union coupling for disassembly or service. Repeat cycle timers and 24 VAC step-down transformers with waterproof enclosures are included with the pressure module

ColorFloor troughs are unpainted stainless steel, with a brushed stainless finish on the outer rim. Standard grating is green; options are black, gray, red, yellow and stainless steel.

SizesSelf-Washing and Clog-Free Floor Troughs��Strainer length is equal to the length of the trough ��Standard depth: 5 1/8" to 9" ��See Table 1

Standard Floor Trough��Multiple depths; drains on either end or in the center��See Table 1

http://www.reedconstructiondata.com/marketing-solutions/smartbuilding-index/

mailto:info%40hpsubfloors.com?subject=Inquiry%20from%20Reedd%20SPEC-DATA

http://www.sanifloor.com


Sani-Floor, Inc.


Table 1 - Technical Data

Self-Washing Floor Trough and Clog-free Floor Trough Model Width Length Standard Min. Standard Shallow Min. Shallow # # Water/ Depth Depth Depth Depth Nozzles Grates Hour Depression* Depression* (Self-Washing) (Self-Washing)

SF-1-22 21 3/4" 30 1/8" 7 1/8" 7 5/8" 5 1/8" 5 5/8" 2 1 0.30 gal (552 mm) (765 mm) (181 mm) (194 mm) (130 mm) (143 mm) (1.41 L)

SF-2-22 21 3/4" 58 15/16" 7 1/8" 7 5/8" 5 1/8" 5 5/8" 6 2 0.91 gal (552mm) (1497mm) (181 mm) (194 mm) (130 mm) (143 mm) (3.44 L)



SF-1-30 30 7/8" 21" 8" 8 1/2" 6" 6 1/2" 2 1 0.30 gal (784 mm) (533 mm) (203 mm) (216 mm) (152 mm) (165 mm) (1.41 L)

SF-2-30 30 7/8" 40 11/16" 8" 8 1/2" 6" 6 1/2" 4 2 0.61 gal (784 mm) (1033 mm) (203 mm) (216 mm) (152 mm) (165 mm) (2.31 L)






SF-1-36 36 7/8" 21" 9" 9 1/2" 7" 7 1/2" 2 1 0.30 gal (937 mm) (533 mm) (229 mm) (241 mm) (178 mm) (191 mm) (1.41 L)







*from finished floor elevation

Sani-Floor Standard Floor TroughModel/Width Length (inch/mm) Depth

SF-12 12" 18" 24" 30" 36" 42" 48" 54" 60" 66" 72" 78" 84" 90" 96" 102" 108" 114" 120" 126" 132" 138" 144" 2"-6" (305) (457) (610) (762) (914) (1067) (1219) (1372) (1524) (1676) (1829) (1981) (2134) (2286) (2438) (2591) (2743) (2896) (3048) (3200) (3353) (3505) (3658) (51-152)

SF-18 " " " " " " " " " " " " " " " " " " " " " " " "

SF-24 " " " " " " " " " " " " " " " " " " " " " " " "

SF-30 " " " " " " " " " " " " " " " " " " " " " " " "

SF-36 " " " " " " " " " " " " " " " " " " " " " " " "

For example, SF-12-36 is a 12" width x 36" length model. Contact Sani-Floor for special configuration options.



Sani-Floor, Inc.


Benefits�� Models – including exclusive self-washing systems – for a variety of floor drainage needs�� Increased environment safety and sanitation��Reduced sediment in grease traps minimizes drain clog ��Anti-slip, anti-fatigue grating for increased productivity��Reduced maintenance��Ease of installation

Limitations�� Sani-Floor grates allow temperatures to 190 degrees F (87 degrees C), with an occasional maximum of 220 degrees F (104 degrees C)

Options, Accessories��Hand button (manual activation)��Sanitizing system��Stainless steel subway grating��ADA grating – 1/2" x 1/2" (13 x 13 mm) spacing��Shallow depth (standard models)��Tamper-proof grate lockdown

4. Technical DataApplicable Standards

ASTM InternationalASTM E84 Standard Test Method for Surface Burning Characteristics of Building Materials

Approvals�� Los Angeles Plumbing Code (LAPC) and/or Los Angeles Mechanical Code (LAMC) compliant��NFSI certified by the National Floor Safety Institute��NSF certified by NSF International

Fire PerformanceSani-Floor's Self-Washing, Clog Free and Standard Floor Systems have the following surface burning characteristics (ASTM E84): ��Flamespread – 5 or less; Class 1��Low Smoke Density

5. InstallationPreparatory WorkDeliver products in manufacturer’s original, unopened, undamaged containers with identification labels intact. All Sani-Floor units are shipped from the factory with ¾" plywood inserts included. The inserts should be left in place until after installation and the concrete pour is complete. Failure to do so may cause sides of the unit to distort inwards and result in the grates not fitting properly. Additionally, the inserts will help protect the troughs during the remainder of the construction process, prior to final installation of the non-slip grates.Store materials protected from exposure to harmful environmental conditions, frost-free and at temperature and humidity levels recommended by the manufacturer. Remove any damaged or deteriorated material from the job site.

MethodsRefer to the Sani-Floor Design, Installation and Operation manuals for installation requirements and procedures.

DisposalEmpty packaging and dispose of excess material in accordance with federal, state and local waste disposal regulations.

PrecautionsDo not install stainless steel floor units as part of an integral pour of the surrounding floor areas. For complete safety information, contact Sani-Floor, Inc.

6. Availability and CostSani-Floor products are available throughout the U.S., Canada and Europe. For pricing and availability in specific areas, contact [email protected] or visit www.sanifloor.com.

7. WarrantyContact Sani-Floor for details. Installed and used as directed, Sani-floor products carry the following warranties:�� Stainless steel floor trough pan – 20 years materials and workmanship�� Fiberglass or stainless steel grating – 3 years from date of installation��Self-washing nozzles – 5 years from date of installation��Solenoid valves – 1 year from date of manufacture��Pressure tank – 5 years from date of manufacture

Sani-Floor Self-Washing Floor Trough



Sani-Floor, Inc.


8. Maintenance TroughTo remove light grease buildup, occasionally hand spray a commercial degreaser before refitting the grates. Allow the degreaser to sit. For Self-Washing models, cycle the system; for Clog-Free and Standard models, hose the system. If additional degreasing is needed on a continual basis, chemicals can be injected into the supply line of Self-Washing models. Contact Sani-Floor for further recommendations.Do not use chlorine-based cleaners on the troughs, as they can damage the stainless steel.

Strainer TrayFor proper performance, clean the system strainer trays once per shift. Depending on the system location in the facility, this interval may be adjusted. The unit is designed to allow water to pass through the collected refuse, but it must still be monitored.Important: Do not clean the strainer trays by striking the tray against the trash container. Any remaining residue should be rinsed or brushed off.

Anti-Fatigue GratingA slight flexing of the standard grates is intentional to provide an anti-fatigue working platform. If the amount of flexing increases to an unacceptable level, contact Sani-Floor to purchase replacement grates.Heavy-duty non-flexible grates are available from Sani-Floor for installations with higher load applications. Contact Sani-Floor for details and specifications.

If there is a need to place heavy objects in the Sani-Floor areas during equipment servicing, remodeling, etc., 3/4" (19 mm) sheets of plywood are recommended to replace the grates.Ideally, fiberglass grates should be run through the facility’s ware washer at the end of the day. If a ware washer is not available, grates can be washed in a three compartment sink and then reinstalled. Grates should always be installed with the aluminum oxide anti-slip side up.Lack of proper cleaning of the grates per the above recommendations may lead to the growth of mold and mildew. If mold or mildew develops, deck brushing with a cleaner and degreaser is advised. Rinse grates well before reinstallation.Do not use chlorine based products to clean the grates still in place on the Sani-Floor units, as the chemicals may damage the stainless steel.The non-slip grates should not be mopped, as the abrasive surface will tear strings from the mops.Over a period of years, the grates may become damaged to the point of needing replacement. It is also possible that, through normal use, the designed deflection in the grate may require replacement. Contact Sani-Floor for replacement parts.

9. Technical ServicesSani-Floor representatives provide complete technical services at (231) 599-2930.

10. Filing Systems��Reed Construction Data�� Additional product information is available from the manufacturer upon request.


Documents

1. Product Name 2. Manufacturer - CMD Group · Tamper-proof grate lockdown 4. Technical Data Applicable Standards ... Deliver products in manufacturer’s original, unopened, undamaged