8V7 (zener)

Embed Size (px)

Citation preview

  • 8/14/2019 8V7 (zener)

    1/6

    MMBZ5226B

    -MMBZ5257B

    Series

    Tolerance: B = 5%

    Electrical Characteristics TA = 25C unless otherwise noted

    CONNECTION

    DIAGRAM

    2 NC

    3

    1

    Absolute Maximum Ratings* TA = 25C unless otherwise noted

    Parameter Value Units

    Storage Temperature Range -55 to +150 C

    Maximum Junction Operating Temperature + 150 C

    Total Device Dissipation

    Derate above 25C

    3502.8

    mW

    mW/C

    *These ratings are limiting values above which the serviceability of the diode may be impaired.

    NOTES:1) These ratings are based on a maximum junction temperature of 150 degrees C.2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations.

    Device MarkVZ(V)

    ZZ( )

    IZT(mA)

    ZZK( )

    IZK(mA)

    VR(V)

    IR(A)

    MMBZ 5226BMMBZ 5227BMMBZ 5228BMMBZ 5229B

    8A8B8C8D

    3.33.63.94.3

    28242322

    20202020

    1,6001,7001,9001,000

    0.250.250.250.25

    1.01.01.01.0

    2515105.0

    MMBZ 5230BMMBZ 5231BMMBZ 5232BMMBZ 5233B

    8E8F8G8H

    4.75.15.66.0

    1917117.0

    20202020

    1,9001,6001,6001,600

    0.250.250.250.25

    2.02.03.03.5

    5.05.05.05.0

    MMBZ 5234BMMBZ 5235BMMBZ 5236BMMBZ 5237B

    8J8K8L8M

    6.26.87.58.2

    7.05.06.08.0

    20202020

    1,000750500500

    0.250.250.250.25

    4.05.06.06.5

    5.03.03.03.0

    MMBZ 5238BMMBZ 5239BMMBZ 5240BMMBZ 5241BMMBZ 5242B

    8N8P8Q8R8S

    8.79.1101112

    8.010172230

    2020202020

    600600600600600

    0.250.250.250.250.25

    6.57.08.08.49.1

    3.03.03.02.01.0

    VF Foward Voltage = 0.9 V Maximum @ IF = 10 mA for all MMBZ 5200 series

    @@ @

    NOTE:National preferred devices in BOLD

    MMBZ5226B - MMBZ5257B Series Zeners

    SOT-23

    3

    1

    2

    2000 Fairchild Semiconductor International MMBZ5226B-MMBZ5257B Rev A1

  • 8/14/2019 8V7 (zener)

    2/6

    MMBZ5226B

    -MMBZ5257B

    Series

    Electrical Characteristics (continued) TA = 25C unless otherwise noted

    MMBZ Series Zeners(continued)

    Device MarkVZ(V)

    ZZ( )

    IZT(mA)

    ZZK( )

    IZK(mA)

    VR(V)

    IR(nA)

    MMBZ 5243BMMBZ 5244BMMBZ 5245BMMBZ 5246BMMBZ 5247B

    8T8U8V8W8X

    1314151617

    1315161719

    9.59.08.57.87.4

    600600600600600

    0.250.250.250.250.25

    9.910111213

    500100100100100

    MMBZ 5248BMMBZ 5249BMMBZ 5250BMMBZ 5251BMMBZ 5252B

    8Y8Z

    81A81B81C

    1819202224

    2123252933

    7.06.66.25.65.2

    600600600600600

    0.250.250.250.250.25

    1414151718

    100100100100100

    MMBZ 5253BMMBZ 5254BMMBZ 5255BMMBZ 5256BMMBZ 5257B

    81D81E81F81G81H

    2527283033

    3541444958

    5.04.64.54.23.8

    600600600600700

    0.250.250.250.250.25

    1921212325

    100100100100100

    VF Foward Voltage = 0.9 V Maximum @ IF = 10 mA for all MMBZ 5200 series

    NOTE:National preferred devices in BOLD

  • 8/14/2019 8V7 (zener)

    3/6

    SOT-23 PackagingConfiguration: Figure 1.0

    ComponentsLeader Tape500mm minimum or

    125 empty pockets

    Trailer Tape300mm minimum or

    75 empty pockets

    SOT-23 Tape Leader and TrailerConfiguration: Figure 2.0

    Cover Tape

    Carrier Tape

    Note/Comments

    PackagingOption

    SOT-23 PackagingInformation

    Standard(no flow code)

    D87Z

    Packagingtype

    Reel Size

    TNR

    7" Dia

    TNR

    13"

    Qty per Reel/ Tube/Bag 3,000 10,000

    Box Dimension (mm) 187x107x183 343x343x64

    Max qty per Box 24,000 30,000

    Weight per unit (gm) 0.0082 0.0082

    Weight per Reel (kg) 0.1175 0.4006

    Human readable

    Label

    Human Readable Label

    Human Readable Label sample

    343mm x 342mm x 64mmIntermediate box for L87Z Option

    187mm x 107mm x 183mm

    Intermediate Box for Standard Option

    SOT-23 Unit Orientation

    3P 3P 3P 3P

    Human Readable

    Label

    Customized Label

    EmbossedCarrier Tape

    Antistatic Cover Tape

    Packaging Description:

    SOT-23made from a dissipative (carbon filled) polyca rbonateresin. The cover tape is a multilayer film (Heat A ctivatedAdhesive in nature) primarily composedof polyester film,adhesive l ayer, sealant, and anti-static sprayed agent .These reeled parts in standard option are shipped with3,000 units per 7" or 177cm diameter reel. The reels aredark blue in color a nd is made of polystyreneplastic (anti-static coated). Other option comes in 10,000 units per 13"or 330cm diameter reel. This and some other options aredescribed in the Packaging Inf ormation table.

    These full reels areindiv idually l abeled and placed insidea standard intermediate made of recyclable corrugatedbrown paper with a Fairchild logo printing. One pizza boxcontains eight reels maximum. And t hese intermediateboxes are placed inside a labeled shipping box whichcomesi n diff erent sizes depending on the number of partsshipped.

    parts are shipped in tape. The carrier tape is

    SOT-23 Tape and Reel Data and Package Dimensions

    September 1999, Rev. C

  • 8/14/2019 8V7 (zener)

    4/6

    Dimensions are in millimeter

    Pkg type A0 B0 W D0 D1 E1 E2 F P1 P0 K0 T Wc Tc

    SOT-23

    (8mm)

    3.15

    +/-0.10

    2.77

    +/-0.10

    8.0

    +/-0.3

    1.55

    +/-0.05

    1.125

    +/-0.125

    1.75

    +/-0.10

    6.25

    min

    3.50

    +/-0.05

    4.0

    +/-0.1

    4.0

    +/-0.1

    1.30

    +/-0.10

    0.228

    +/-0.013

    5.2

    +/-0.3

    0.06

    +/-0.02

    Dimensions are in inches and millimeters

    Tape SizeReel

    OptionDim A Dim B Dim C Dim D Dim N Dim W1 Dim W2 Dim W3 (LSL-USL)

    8mm 7" Dia7.00177.8

    0.0591.5

    512 +0.020/-0.00813 +0.5/-0.2

    0.79520.2

    2.16555

    0.331 +0.059/-0.0008.4 +1.5/0

    0.56714.4

    0.311 0.4297.9 10.9

    8mm 13" Dia13.00330

    0.0591.5

    512 +0.020/-0.00813 +0.5/-0.2

    0.79520.2

    4.00100

    0.331 +0.059/-0.0008.4 +1.5/0

    0.56714.4

    0.311 0.4297.9 10.9

    See detail AA

    Dim A

    max

    13" Diameter Option

    7" Diameter Option

    Dim AMax

    See detail AA

    W3

    W2 max Measured at Hub

    W1 Measured at Hub

    Dim N

    Dim Dmin

    Dim C

    B Min

    DETAIL AA

    Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481rotational and lateral movement requirements (see sketches A, B, and C).

    20 deg maximum component rotation

    0.5mmmaximum

    0.5mmmaximum

    Sketch C (Top View)

    Component lateral movement

    Typicalcomponentcavitycenter line

    20 deg maximum

    Typicalcomponentcenter line

    B0

    A0

    Sketch B (Top View)

    Component Rotation

    Sketch A (Side or Front Sectional View)

    Component Rotation

    User Direction of Feed

    SOT-23 Embossed Carrier TapeConfiguration: Figure 3.0

    SOT-23 Reel Configuration: Figure 4.0

    P1 A0

    D1

    F W

    E1

    E2

    Tc

    Wc

    K0

    T

    B0

    D0P0 P2

    SOT-23 Tape and Reel Data and Package Dimensions, continued

    September 1999, Rev. C

  • 8/14/2019 8V7 (zener)

    5/6

    SOT-23 (FS PKG Code 49)

    SOT-23 Tape and Reel Data and Package Dimensions, continued

    September 1998, Rev. A1

    1:1Scale 1:1 on letter size paper

    Dimensions shown below are in:

    inches [millimeters]

    Part Weight per unit (gram): 0.0082

  • 8/14/2019 8V7 (zener)

    6/6

    TRADEMARKS

    ACExBottomless

    CoolFETCROSSVOLT

    E2CMOSTM

    FACT

    FACT Quiet Series

    FASTFASTr

    GTO

    The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and isnot intended to be an exhaustive list of all such trademarks.

    LIFE SUPPORT POLICY

    FAIRCHILDS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORTDEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.As used herein:

    1. Life support devices or systems are devices orsystems which, (a) are intended for surgical implant intothe body, or (b) support or sustain life, or (c) whosefailure to perform when properly used in accordancewith instructions for use provided in the labeling, can bereasonably expected to result in significant injury to theuser.

    2. A critical component is any component of a lifesupport device or system whose failure to perform canbe reasonably expected to cause the failure of the lifesupport device or system, or to affect its safety or

    effectiveness.

    PRODUCT STATUS DEFINITIONS

    Definition of Terms

    Datasheet Identification Product Status Definition

    Advance Information

    Preliminary

    No Identification Needed

    Obsolete

    This datasheet contains the design specifications forproduct development. Specifications may change inany manner without notice.

    This datasheet contains preliminary data, andsupplementary data will be published at a later date.Fairchild Semiconductor reserves the right to makechanges at any time without notice in order to improvedesign.

    This datasheet contains final specifications. FairchildSemiconductor reserves the right to make changes atany time without notice in order to improve design.

    This datasheet contains specifications on a productthat has been discontinued by Fairchild semiconductor.The datasheet is printed for reference information only.

    Formative orIn Design

    First Production

    Full Production

    Not In Production

    DISCLAIMER

    FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHERNOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD

    DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT

    OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENTRIGHTS, NOR THE RIGHTS OF OTHERS.

    SuperSOT-8SyncFET

    TinyLogicUHC

    VCX

    HiSeCISOPLANAR

    MICROWIREPOP

    PowerTrenchQFET

    QS

    Quiet Series

    SuperSOT-3

    SuperSOT-6

    Rev. E