Upload
marrrian
View
226
Download
0
Embed Size (px)
Citation preview
8/12/2019 Fpmr Ici Qrg 2 1
1/21
FlexiPacket MultiRadio
Integrated Coupler Install QuickReference Guide
A25000-A1600-A033-01-76P1
Issue: 1 Issue date: April 2011
Nokia Siemens Networks is continually str iving to reduce the adverse environmental effects of
its products and services. We would like to encourage you as our customers and users to join
us in working towards a cleaner, safer environment. Please recycle product packaging and
follow the recommendations for power use and proper disposal of our products and their
components.
If you should have questions regarding our Environmental Policy or any of the environmental
services we offer, please contact us at Nokia Siemens Networks for any additional information.
8/12/2019 Fpmr Ici Qrg 2 1
2/21
2 A25000-A1600-A033-01-76P1
Issue: 1 Issue date: April 2011
Integrated Coupler Install Quick Reference Guide
The information in this document is subject to change without notice and describes only the
product defined in the introduction of this documentation. This documentation is intended for the
use of Nokia Siemens Networks customers only for the purposes of the agreement under whichthe document is submitted, and no part of it may be used, reproduced, modified or transmitted
in any form or means without the prior written permission of Nokia Siemens Networks. The
documentation has been prepared to be used by professional and properly trained personnel,
and the customer assumes full responsibility when using it. Nokia Siemens Networks welcomes
customer comments as part of the process of continuous development and improvement of the
documentation.
The information or statements given in this documentation concerning the suitability, capacity,
or performance of the mentioned hardware or software products are given "as is" and all liability
arising in connection with such hardware or software products shall be defined conclusively and
finally in a separate agreement between Nokia Siemens Networks and the customer. However,
Nokia Siemens Networks has made all reasonable efforts to ensure that the instructions
contained in the document are adequate and free of material errors and omissions. Nokia
Siemens Networks will, if deemed necessary by Nokia Siemens Networks, explain issues which
may not be covered by the document.
Nokia Siemens Networks will correct errors in this documentation as soon as possible. IN NO
EVENT WILL NOKIA SIEMENS NETWORKS BE LIABLE FOR ERRORS IN THIS DOCUMEN-
TATION OR FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO SPECIAL, DIRECT,
INDIRECT, INCIDENTAL OR CONSEQUENTIAL OR ANY LOSSES, SUCH AS BUT NOT
LIMITED TO LOSS OF PROFIT, REVENUE, BUSINESS INTERRUPTION, BUSINESS
OPPORTUNITY OR DATA,THAT MAY ARISE FROM THE USE OF THIS DOCUMENT OR
THE INFORMATION IN IT.
This documentation and the product it describes are considered protected by copyrights and
other intellectual property rights according to the applicable laws.
The wave logo is a trademark of Nokia Siemens Networks Oy. Nokia is a registered trademark
of Nokia Corporation. Siemens is a registered trademark of Siemens AG.
Other product names mentioned in this document may be trademarks of their respectiveowners, and they are mentioned for identification purposes only.
Copyright Nokia Siemens Networks 2011. All rights reserved.
f Important Notice on Product SafetyThis product may present safety risks due to laser, electricity, heat, and other sources
of danger.
Only trained and qualified personnel may install, operate, maintain or otherwise handle
this product and only after having carefully read the safety information applicable to this
product.
The safety information is provided in the Safety Information section in the Legal, Safety
and Environmental Information part of this document or documentation set.
The same text in German:
f Wichtiger Hinweis zur ProduktsicherheitVon diesem Produkt knnen Gefahren durch Laser, Elektrizitt, Hitzeentwicklung oder
andere Gefahrenquellen ausgehen.
Installation, Betrieb, Wartung und sonstige Handhabung des Produktes darf nur durch
geschultes und qualifiziertes Personal unter Beachtung der anwendbaren Sicherheits-
anforderungen erfolgen.
Die Sicherheitsanforderungen finden Sie unter Sicherheitshinweise im Teil Legal,
Safety and Environmental Information dieses Dokuments oder dieses Dokumentations-
satzes.
8/12/2019 Fpmr Ici Qrg 2 1
3/21
A25000-A1600-A033-01-76P1
Issue: 1 Issue date: April 2011
3
Integrated Coupler Install Quick Reference Guide
Table of ContentsThis document has 21 pages.
1 Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71.1 Intended audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.2 Structure of this document. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.3 Symbols and conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.4 History of changes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1.5 Waste electrical and electronic equipment (WEEE) . . . . . . . . . . . . . . . . 9
1.6 RoHS compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3 XD coupler installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3.2 Equipment and tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3.3 Coupler assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3.3.1 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3.3.2 Mounting the coupler on the antenna . . . . . . . . . . . . . . . . . . . . . . . . . . 14
3.3.3 Fitting the FlexiPacket MultiRadios to the coupler. . . . . . . . . . . . . . . . . 16
3.4 Polarisation adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
3.4.1 Remove feed protection covers and check O-ring location . . . . . . . . . . 19
3.5 Torque chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
4 FlexiPacket MultiRadio installation on an FH coupler already installed. 20
8/12/2019 Fpmr Ici Qrg 2 1
4/21
4 A25000-A1600-A033-01-76P1
Issue: 1 Issue date: April 2011
Integrated Coupler Install Quick Reference Guide
List of FiguresFigure 1 WEEE label. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Figure 2 Integrated coupler assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Figure 3 Installation materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Figure 4 Remove protective cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Figure 5 Stud bolt insertion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Figure 6 Remove the protective cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Figure 7 Coupler installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Figure 8 Protective cover removing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Figure 9 Label removing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Figure 10 FlexiPacket MultiRadio installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Figure 11 Safety hook. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Figure 12 Polarisation adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Figure 13 Polarisation adjustment (Cont) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Figure 14 FH Adapter detail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Figure 15 FH Adapter installed on the FlexiPacket MultiRadio. . . . . . . . . . . . . . . . 20
Figure 16 FH Adapter mounted on the FlexiPacket MultiRadio . . . . . . . . . . . . . . . 21
Figure 17 Remove protective covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
8/12/2019 Fpmr Ici Qrg 2 1
5/21
A25000-A1600-A033-01-76P1
Issue: 1 Issue date: April 2011
5
Integrated Coupler Install Quick Reference Guide
List of TablesTable 1 Structure of this document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Table 2 List of symbols and conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Table 3 History of changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Table 4 Installation materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Table 5 Torque chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
8/12/2019 Fpmr Ici Qrg 2 1
6/21
6 A25000-A1600-A033-01-76P1
Issue: 1 Issue date: April 2011
Integrated Coupler Install Quick Reference Guide
8/12/2019 Fpmr Ici Qrg 2 1
7/21
A25000-A1600-A033-01-76P1
Issue: 1 Issue date: April 2011
7
Integrated Coupler Install Quick Reference Guide Preface
1 PrefaceThis document provides a quick guide to install the integrated coupler of the FlexiPacket
MultiRadio.
1.1 Intended audience
This document is intended to the installers in charge to install the integrated coupler of
the FlexiPacket MultiRadio.
1.2 Structure of this document
The document is divided into the following main chapters:
1.3 Symbols and conventions
The following symbols and mark-up conventions are used in this document:
Chapter Title Subject
Chapter 1 Preface Provides an introduction to the
document
Chapter 2 Overview Provides an overview to the 2 different
installations: XD or FH mechanical com-
patibility
Chapter 3 XD coupler installation Provides the information to install the
coupler with XD mechanical compatibil-
ity
Chapter 4 FlexiPacket MultiRadio instal-
lation on an FH coupler
already installed
Provides the information to install the
coupler with FH mechanical compatibil-
ity
Table 1 Structure of this document
8/12/2019 Fpmr Ici Qrg 2 1
8/21
8 A25000-A1600-A033-01-76P1
Issue: 1 Issue date: April 2011
Integrated Coupler Install Quick Reference GuidePreface
Representation Meaning
fDANGER!
fWARNING!
fCAUTION!
A safety message indicates a dangerous situation where
personal injury is possible.
The keywords denote hazard levels with the following meaning:
DANGER!- Indicates a hazardous situation which, if not
avoided, will result in death or serious (irreversible) personal
injury.
WARNING!- Indicates a hazardous situation which, if not
avoided, could result in death or serious (irreversible) personal
injury.
CAUTION! - Indicates a hazardous situation which, if not
avoided, may result in minor or moderate (reversible) personal
injury.
wNOTICE: A property damage message indicates a hazard that may resultin equipment damage, data loss, traffic interruption, and so on.
g A note provides important information related to the topic, forexample, not obvious exceptions to a rule or side effects.
t A tip provides additional information related to the topic which isnot essential in the context, but given for convenience.
Bold All names of graphical user interface (GUI) objects, such as
windows, field names, buttons, and so on.
Example: Select the Full Screencheck box and press OK.
Terms and abbreviations which are linked to an entry in theglossary and list of abbreviations respectively
Important key words
Italic Files, folders, and file system paths.
Example:/usr/etc/sbin/ftpd.exe
Emphasized words
typewriter Input to be typed in a command line or a GUI field.
Examples:
ping -t 192.168.0.1
Enter Worldin the Domainfield.
Output from a command, error messages, content of a statusline, and so on
File content, such as program sources, scripts, logs, and
settings
Placeholders, for example as part of a file name or field value.
Examples:
.pngor :
Table 2 List of symbols and conventions
8/12/2019 Fpmr Ici Qrg 2 1
9/21
A25000-A1600-A033-01-76P1
Issue: 1 Issue date: April 2011
9
Integrated Coupler Install Quick Reference Guide Preface
Screenshots of the graphical user interface are examples only to illustrate principles.
This especially applies to a software version number visible in a screenshot.
1.4 History of changes
1.5 Waste electrical and electronic equipment (WEEE)
All waste electrical and electronic products must be disposed of separately from the
municipal waste stream via designated collection facilities appointed by the government
or the local authorities. The WEEE label (see Figure 1) is applied to all such devices.
[square brackets] A key to be pressed on a PC keyboard, for example [F11].
Keys to be pressed simultaneously are concatenated with a +
sign, for example [CTRL]+[ALT]+[DEL].
Keys to be pressed one after another are concatenated with
spaces, for example [ESC] [SPACE] [M].
> The greater than symbol > is used to concatenate a series of
GUI items in order to depict a GUI path. This is an abridged pre-
sentation of a procedure to be carried out in order to perform an
action or display a window or dialog box.
Examples:
A simple menu path: File> Save as ...
A more complex GUI path:SURPASS TransNetwindow > Toolsmenu >
3R-Matrix Report command > 3R-Matrix Reportdialog box
x
(in card names)
For convenience, card names are sometimes listed with a lower
case x variable, in order to concisely represent multiple cards.
Example:
I01T40G-x (is to be interpreted as I01T40G-1 and I01T40G-2)
Representation Meaning
Table 2 List of symbols and conventions (Cont.)
Issue Issue date Remarks
1 April 2011 1st version
Table 3 History of changes
8/12/2019 Fpmr Ici Qrg 2 1
10/21
10 A25000-A1600-A033-01-76P1
Issue: 1 Issue date: April 2011
Integrated Coupler Install Quick Reference GuidePreface
Figure 1 WEEE label
The correct disposal and separate collection of waste equipment will help prevent poten-
tial negative consequences for the environment and human health. It is a precondition
for reuse and recycling of used electrical and electronic equipment.
For more detailed information about disposal of such equipment, please contact Nokia
Siemens Networks.
The above statements are fully valid only for equipment installed in the countries of the
European Union and is covered by the directive 2002/96/EC. Countries outside theEuropean Union may have other regulations regarding the disposal of electrical and
electronic equipment.
1.6 RoHS compliance
FlexiPacket MultiRadio complies with the European Union RoHS Directive 2002/95/EC
on the restriction of use of certain hazardous substances in electrical and electronic
equipment.
The directive applies to the use of lead, mercury, cadmium, hexavalent chromium, poly-
brominated biphenyls (PBB), and polybrominated diphenylethers (PBDE) in electrical
and electronic equipment put on the market after 1 July 2006.
Materials usage information on Nokia Siemens Networks Electronic Information
Products imported or sold in the Peoples Republic of China
FlexiPacket MultiRadio complies with the Chinese standard SJ/T 11364-2006 on the
restriction of the use of certain hazardous substances in electrical and electronic equip-
ment. The standard applies to the use of lead, mercury, cadmium, hexavalent chro-
mium, polybrominated biphenyls (PBB), and polybrominated diphenyl ethers (PBDE) in
electrical and electronic equipment put on the market after 1 March 2007.
8/12/2019 Fpmr Ici Qrg 2 1
11/21
A25000-A1600-A033-01-76P1
Issue: 1 Issue date: April 2011
11
Integrated Coupler Install Quick Reference Guide Overview
2 OverviewFlexiPacket MultiRadio is compatible with the XD antennas.
For the compatibility with the FlexiHopper antennas a special adapter (to be installed onthe FlexiPacket MultiRadio) is available.
8/12/2019 Fpmr Ici Qrg 2 1
12/21
12 A25000-A1600-A033-01-76P1
Issue: 1 Issue date: April 2011
Integrated Coupler Install Quick Reference GuideXD coupler installation
3 XD coupler installation
3.1 Overview
Figure 2 Integrated coupler assembly
This integrated HSB coupler can be installed with the FlexiPacket MultiRadio.
3.2 Equipment and tools
t Do not use any installation components other than those enclosed with the equipmentor recommended by the supplier.
Check that the installation materials illustrated Figure 3and described in Table 4are
included in the delivery of the integrated coupler.
Figure 3 Installation materials
8/12/2019 Fpmr Ici Qrg 2 1
13/21
A25000-A1600-A033-01-76P1
Issue: 1 Issue date: April 2011
13
Integrated Coupler Install Quick Reference Guide XD coupler installation
3.3 Coupler assembly
3.3.1 Preparation
t Only properly trained and authorised personnel may perform installation operations onNokia Siemens Networks antennas.
Remove the protective cover from the antenna interface as illustrated in Figure 4.
Figure 4 Remove protective cover
Quantity Description
3 Stud bolt
3 Plain washer
3 Nut
4 Stud bolt
4 Plain washer
4 Nut
1 Polarization rotating tool
Table 4 Installation materials
8/12/2019 Fpmr Ici Qrg 2 1
14/21
14 A25000-A1600-A033-01-76P1
Issue: 1 Issue date: April 2011
Integrated Coupler Install Quick Reference GuideXD coupler installation
3.3.2 Mounting the coupler on the antenna
f CAUTIONThe antenna may fail if the installation fixings are not tightened correctly. Tighten the
installation fixings to the recommended values.
Insert the 4 stud bolts as shown in Figure 5.
Figure 5 Stud bolt insertion
2 Remove the protection cover from the coupler.
Figure 6 Remove the protective cover
8/12/2019 Fpmr Ici Qrg 2 1
15/21
A25000-A1600-A033-01-76P1
Issue: 1 Issue date: April 2011
15
Integrated Coupler Install Quick Reference Guide XD coupler installation
3 Place the coupler onto the antenna and fix the coupler with the plain washers andnuts. Install the coupler with the Safety hook in the lower position as shown in Figure
7.
Figure 7 Coupler installation
4 Remove the 2 protection covers from the coupler as shown in Figure 8.
Figure 8 Protective cover removing
8/12/2019 Fpmr Ici Qrg 2 1
16/21
16 A25000-A1600-A033-01-76P1
Issue: 1 Issue date: April 2011
Integrated Coupler Install Quick Reference GuideXD coupler installation
3.3.3 Fitting the FlexiPacket MultiRadios to the coupler
Remove the protection label.
Figure 9 Label removing
2 Install the 2 FlexiPacket MultiRadios and fix them by using the side tongues asshown in Figure 10.
8/12/2019 Fpmr Ici Qrg 2 1
17/21
A25000-A1600-A033-01-76P1
Issue: 1 Issue date: April 2011
17
Integrated Coupler Install Quick Reference Guide XD coupler installation
Figure 10 FlexiPacket MultiRadio installation
t To facilitate the installation of the lower FlexiPacket MultiRadio first lean the FlexiPacketMultiRadio on the safety hook as shown in Figure 11and then fix the FlexiPacket Multi-
Radio by using the side tongues.
Figure 11 Safety hook
8/12/2019 Fpmr Ici Qrg 2 1
18/21
18 A25000-A1600-A033-01-76P1
Issue: 1 Issue date: April 2011
Integrated Coupler Install Quick Reference GuideXD coupler installation
3.4 Polarisation adjustment
The following instructions show how you can adjust the polarisation on the coupler.
The polarisation adapter is always factory fitted to vertical polarisation.
You can fit it also to horizontal polarisation.
Figure 12 Polarisation adjustment
8/12/2019 Fpmr Ici Qrg 2 1
19/21
A25000-A1600-A033-01-76P1
Issue: 1 Issue date: April 2011
19
Integrated Coupler Install Quick Reference Guide XD coupler installation
Figure 13 Polarisation adjustment (Cont)
3.4.1 Remove feed protection covers and check O-ring location
Remove all protective covers from the feed before you attach coupler to the antenna and
FlexiPacket MultiRadio to the coupler and make sure that O-ring is on place at coupler
antenna port.
f CAUTIONNever peel off or damage the foil covering the waveguide opening of the FlexiPacket
MultiRadio.
This may result in equipment failure if moisture or particles get inside the FlexiPacket
MultiRadio.
3.5 Torque chart
Torque Values
Bolt Torque (Nm) +/- 5%
M3 1.0
M6 7.7
M8 18
M12 60
Table 5 Torque chart
8/12/2019 Fpmr Ici Qrg 2 1
20/21
20 A25000-A1600-A033-01-76P1
Issue: 1 Issue date: April 2011
Integrated Coupler Install Quick Reference GuideFlexiPacket MultiRadio installation on an FH coupler al-ready installed
4 FlexiPacket MultiRadio installation on an FH
coupler already installed
One FH Adapter must be installed on the FlexiPacket MultiRadio and then the assemblymust be mounted on the FH Coupler.
Figure 14 FH Adapter detail
Fix the FH Adapter on the FlexiPacket MultiRadio as shown in Figure 15.
Figure 15 FH Adapter installed on the FlexiPacket MultiRadio
8/12/2019 Fpmr Ici Qrg 2 1
21/21
Integrated Coupler Install Quick Reference Guide FlexiPacket MultiRadio installation on an FH coupler al-ready installed
Figure 16 FH Adapter mounted on the FlexiPacket MultiRadio
If the coupler has protective covers, as in Figure 17, remove them before you attach the
radios to it.
Figure 17 Remove protective covers
Place the radios onto the castings.2 Tighten the spring clips to the Nokia Siemens Networks recommended torque.