Mélanges réactifs Thermodurcissable / Additifs extractibles : …csidoc.insa-lyon.fr/these/2002/garcia_loera/references.pdf · · 2005-02-09between phase behaviour and morphology

Références bibliographiques

Mélanges réactifs Thermodurcissable- additives extractibles. Phénomènes de Séparation de phase et Morphologies: Application matériaux poreux

136

Références Bibliographiques



137

[ADAB 82] ADABBO H.E., WILLIAMS R.J.J, ‘’The Evolution of Thermosetting

Polymers in a Conversion-Temperature Phase Diagram’’, J. of Appl. Polym. 1982, Sci., Vol. 27, pp. 1327-1334

[AERT 93] AERTS L., KUNZ M., BERGHMANS H., KONINGSVELD R., “Relation between phase behaviour and morphology in polyethylene/diphenyl ether systems “, Makromol. Chem., 1993, Vol 194, pp. 2697-2712

[ANTO 99] ANTONIETTI M., CARUSO R.A., GOLTNER C.G., WEISSENBERGER M.C., " Morphology Variation of Porous Polymer Gels by Polymerization in Lyotropic Surfactant Phases ", Macromolecules, 1999, Vol 32, pp. 1383-1389

[ASSO 01] ASSOULINE E., WACHTEL E., GRIGULL S., LUSTIGER A., WAGNER H.D., MAROM G., " Lamellar twisting in α isotactic polypropylene transcrysllanity investigated by synchroton microbeam X-ray diffraction", Polymer, 2001, Vol 42, pp. 6231-6237

[BASS 81] BASSETT D.C., “Principles of Polymer Morphology “, Cambridge: Cambridge University Press, , 1981, p. 251.

[BASS 88a] BASSETT D.C., OLLEY R.H., RAHEIL I.A., “ On crystallization phenomena in PEEK”, Polymer, 1988, Vol. 29, pp. 1745-1754

[BASS 88b] BASSETT D.C., OLLEY R.H., RAHEIL I.A., “On isolated lamellae of melt-crystallized polyethylene”, Polymer, 1988, Vol. 29, pp. 1539-1543

[BASS 95] BASSETT D.C., “Lamellae and their organization in melt-crystallized polymers“ in “Self-Order and Form in Polymeric Materials”, Ed. Keller A., Warner M., Windle A.H., London: Chapman and Hall, 1995, pp. 254-274

[BAUE 86] BAUER M. BAUER J., KUHN G., “Kinetics and modelling of thermal polycyclotrimérisation of aromatic dicyanates“, Acta Polymerica, 1986, Vol. 37, pp. 715-735

[BLAN 97] BLANC D., “Etude théorique et expérimentale du séchage et de la réticulation sous rayonnement infrarouge d’une peinture de type époxy-amine a base aqueuse sur support métallique“ Thèse de doctorat, LMM, INSA de Lyon, 1997, p. 289.

[BONN 99a] BONNET A. “Etude de la mise en oeuvre par extrusion bi-vis de thermoplastiques amorphes à l'aide d'un solvant réactif. Propriétés après réaction “ Thèse de doctorat, LMM, INSA de Lyon, 1999, p.202.

[BONN 99b] BONNET A., PASCAULT J.P., SAUTEREAU H., TAHA M., CAMBERLIN Y., “ Rates of reactions in epoxy-diamine / thermoplastique blends before and after phase separation“, Macromolecules, 1999, Vol. 32, pp. 8517-8525.

[BRAN 89] BRANDRUP J., IMMERGUT E., “Polymer Handbook“, New York: John Wiley and Sons, 1989

[BUCK 83] BUCKNALL C.B., PARTDRIDGE I.K., “ Phase separation in epoxy resins containing polyethersulfone” Polymer, 1983, Vol. 24, pp. 639-644



138

[BURN 91] BURNS J.M., PRIME R.B., BARRALL E.M, OXSEN M.E., WRIGHT

S.J., " Chemistry of an Epoxy-Phenolic Magnetic Disck Coating " In: Polymers in Information Storage Technology, Mittal K.L. ed, New York: Plenum press, 1991, pp. 237-245,

[CAHN 58] CAHN J.W., HILLIARD J.E., “ Free-Energy of a nonuniform system. I- Interfacial free energy “, J. Chem. Phys., 1958, Vol. 28, pp. 258-265

[CARA 63] CARAZZOLO G., MAMMI M., " Crystal Structure of a New Form of Polyoxymethylene ", J. Poly. Sci. Part A, 1963, Vol. 1, pp. 965-983

[CHAN 84] CHAN L.C., GILLHAM J.K., KINLOCH A.J., SHAW S.J., "Rubber-Modified Epoxies: Cure, Transitions and Morphology ", in Rubber modified thermoset resins, Eds C. K Riew and J.K. Gillham, Washington DC: American Chemical Society, 1984, pp. 235-259 (ACS Advances in Chemistry Series n° 208)

[CHAR 80] CHARLESWORTH J.M., " An analysis of the substitution effects involved in diepoxy diamine copolymerization reactions", J. Polym. Sci. Chem., 1980, Vol. 18, pp. 621-628.

[CHAR 94] CHARLIER Y., RUSSELL T., HEDRICK J., " High Temperature Polyimide Nanofoams ", Symp. Proc. Mat. Res. Soc., 1994, Vol 323, MRS, pp. 277-281

[CHAR 97] CHARTOFF R.P., “Thermoplastic Polymers“, in Thermal Characterization of polymeric materials, A. Turi Ed., San Diego: Academic press, 1997, Vol. 1, Chap. 3. pp.1378

[CHEN 00] CHEN H-L., WANG S-F., " Crystallization induced microstructure of polymer blends consisting of two crystalline constituents ", Polymer, 2000, Vol 41, pp. 5157-5164

[CHEN 86] CHENG S.Z.D., WUNDERLINCH B., " Molecular Segregation and Nucleation of Poly(ethylene Oxide) Crystallized from the Melt. II. Kinetic Study ", J. Poly. Sci. Part B., 1986, Vol 24, pp. 595-617

[CHEN 87] CHENG S.Z., WU Z.Q., WUNDERLICH B., “Glass transition and melting beahvior of poly(thio-1,4-phenylene) “, Macromolecules, 1987, Vol. 20, pp. 2802- 2010

[CHEN 91a] CHEN D., PASCAULT J.P., " Surface properties of epoxy systems, 1 ", Makromol. Chem., 1991, Vol 192, pp. 867-882

[CHEN 91b] CHEN D., PASCAULT J.P., " Surface properties of epoxy systems, 2 ", Makromol. Chem., 1991, Vol 192, pp. 883-899

[CHEN 95] CHEN J.P., LEE Y.D., " A real-time study of the phase separation process during polymerization of rubber-modified epoxy ", Polymer, 1995, Vol 36, n° 1, pp. 55-65

[CHEN 96] CHEN H-L., HWANG J.C., CHEN C-C., “Multiple melting and crystal annealing of poly(ethylene terephalate) in its blends with poly(ether imide)“, Polymer, 1996, Vol. 37, pp. 5461-5467.



139

[CHIA 89] CHIANG W-Y., HUANG C-Y., " The Effect of the Soft Segment of

Polyurethane on Copolymer-Type Polyacetal/Polyurethane Blends ", J. Appl. Poly. Sci., 1989, Vol 38, pp. 951-968

[CHIU 01] CHIU H-J., CHEN H-L., LIN J.S., " Crystallization induced microstructure of crystalline/crystalline poly(vinyldenfluoride)/poly(3-hydroxybutyrate) blends probed by Small Angle X-ray Scattering ", Polymer, 2001, Vol 42, pp. 5749-5754

[CHOI 98] CHOI K., JO W.H., HSU S.L., " Determination of Equation-of-State Parameters by Molecular Simulations and Calculations of the Spinodal Curve of Polystyrene/Poly(vinyl methyl ether) Blends ", Macromolecules, 1998, Vol 31, pp. 1366-1372

[DEBE 94] DEBERDT F., BERGHMANS H., “ Phase behaviour of syndiotactic polystyrene-o-xylene “, Polymer, 1994, Vol 35, n° 8, pp. 1694-1704

[DOMP 94] DOMPAS D., GROENINCKX G., " Toughening behaviour of rubber-modified thermoplastic polymers involving very small rubber particles: 1. A criterion for internal rubber cavitation ", Polymer, 1994, Vol 35, n° 22, pp. 4743-4749

[DOYE 00] DOYE J.P.K., FRENKEL D., " The effect of the temperature jumps during polymer crystallization ", Polymer, 2000, Vol 41, pp. 1519-1528

[DUSE 75] DUSEK K., ILAVSKY M., LUNAK S., “Curing of epoxy resins. Statistics of curing diepoxide with amines”, J. Polym. Sci. Symp., 1975, Vol. 53, pp. 29-44

[DUSE 87a] DUSEK K., ILAVSKY M,. LUNAK JR. S., " Formation and structure of networks from poly(oxypropylene) polyamines and diglycidyl ether of bisphenol A. I. Theory ", in: Crosslinked Epoxies, Eds. Sedlacek B. and Kohovec J., Berlin: Walter de Gruyter, 1987, pp. 269-277

[DUSE 87b] DUSEK K., ILAVSKY M,. LUNAK JR. S., " Formation and structure of networks from poly(oxypropylene) polyamines and diglycidyl ether of bisphenol A. II. Reactivity of amino groups, gelation, sol fraction and equilibrium modulus ", in: Crosslinked Epoxies, Eds. Sedlacek B. and Kohovec J., Berlin: Walter de Gruyter, 1987, pp. 490-498

[EDWA 75] EDWARDS B.C., “ The nature of multiple melting transitions in cis-Polyisoprene”, J. Polym. Sci. Part. B., 1975, Vol. 13, pp. 1387-1405

[ENNS 83] ENNS J.B., GILLHAM J.K., “ Time – Temperature – Transformation (TTT) cure diagram: Modeling the cure behavior of thermosets”, J. Appl. Polym. Sci., 1983, Vol. 28, pp. 2567-2591

[ERRO 96] ERRO R., GAZTELUMENDI M., NAZABAL J., " Transitions and Mechanical Properties in Polyoxymethylene/Phenoxy Blends ", J. Poly. Sci.: Part B, 1996, Vol 34, pp. 1055-1062

[EVER 00a] EVERAERT V., GROENINCKX G., AERTS L., " Fractionated crystallization inmmiscible POM/(PS/PPE) blends Part 1: Effect of blend phase morphology and physical state of the amorphous matrix phase ", Polymer, 2000, Vol 41, pp. 1409-1428



140

[EVER 00b] EVERAERT V., GROENINCKX G., PIONTECK J., FAVIS B.D., AERTS L., MOLDENAERS P., MEWIS J., " Miscible PS/PPE compounds: and alternative for blend phase morphology studies? Influence of the PPE content on the surface tension of PS/PPE and on the interfacial tension in PP/(PS/PPE) and POM/(PS/PPE) blends", Polymer, 2000, Vol 41, pp. 1011-1025

[EVER 99] EVERAERT V., AERTS L., GROENINCKX G., “ Phase morphology development in immiscible PP/(PS/PPE) blends influence of the melt-viscosity ratio and blend composition “, Polymer, 1999, Vol 40, pp. 6627-6644

[FANG 95] FANG D.P., FRONTINI P.M., RICCARDI C.C., WILLIAMS R.J.J., ‘’Rubber-Modified Thermosets Cured in Heated Molds: Experimental Study of Phase separation Profiles’’, Polym. Eng. and Sci., 1995, Vol. 35, n° 17, pp. 1359-1368

[FERA 01] FERAIN E., LEGRAS R., "Pore shape control in nanoporous particle track etched membrane ", Nucl. Instrum. Methods Phys. Res., Sect. B; 2001, Vol. 174, pp. 116-122

[FERA 01] FERAIN E., LEGRAS R., "Efficient production of nanoporous paricle track t etched membrane with controlled propieties", Radiation Measurements, 2001, Vol. 34, pp. 585-588

[FLOR 53] FLORY P.J., “Principles of Polymer Chemistry“, Ithaca: Cornell Univ. Press,, 1953, p. 672.

[FOX 56] FOX T.G., “Influence of diluent and copolymer composition on the glass transition temperature of the polymer system”, Bull. Am. Phys. Soc., 1956, Vol. 2, pp. 123-135

[FREC 93] FRECHET J.M., " Design and preparation of novel particulate and continuos polymeric macroporous media for the separation of biological and synthetic molecules ", Makromol. Chem. Macromol. Symp., 1993, Vol 70, pp. 289-301

[FUKU 60] FUKUI K., YAMABE T., " A theory of Gel Formation with Terfunctional Interunit Junction ", J. Polym. Sci, 1960, Vol 45, pp. 305-312

[FYFE 92] FYFE C.A., NIU J., RETTING S.J., BURLINSON N.E., REIDSEMA C.M., WANG D.W., POLIKS M., “ High-resolution 13C and 15N NMR investigations of mechanism of the curing reactions of cyanate-based polymer resins in solution and the solid state”, Macromolecules, 1992, Vol. 25, pp. 6289-6301

[GAN 94] GAN L.M., CHIENG T.H., CHEW C.H., NG S.C., " Microporous Polymeric Materials from Microemulsion Polymerization ", American Chemical Society (Eds. Langmuir), 1994, Vol 10, pp. 4022-4026

[GANK 96] GANKEMA H., HEMPENIOUS M.A., " Gel template leaching: An approach to functional nanoporous membranes ", Macromol. Symp., 1996, Vol 102, pp. 381-390

[GARC 00] GARCIA-LOERA A., DUMON M., PASCAULT J.P., " Porous Epoxy Thermosetting Polymers Obtained by a Phase Separation Process in the Presence of Emulsifiers ", Macromol. Chem. Phys., Macromolecular Symp. , 2000, Vol 151, pp. 341-346



141

[GAUR 81] GAUR U., WUNDERLICH B., “Heat capacity and other thermodynamic

proprieties of linear macromolecules. III. Polyoxides”, J. Phys. Chem.Ref.Data, 1981, Vol. 10, pp. 1001-1050

[GEIL 00] GEIL P.H., " Some overlooked problems in polymer crystallization ", Polymer, 2000, Vol 41, pp. 8983-9001

[GEIL 68] GEIL P.H., “Polymer Single Crystals “, New York: John Wiley & Sons,1963, p. 560.

[GEOR 94] GEORJON O. “Relation entre la structure et les propriétés de réseaux polymères synthétisés à partir d’un monomère cyanate’’ Thèse de doctorat, LMM, INSA de Lyon, 1994, p. 219.

[GIAN 90] GIANOTTI G., VALVASSORI A., " Fusion enthalpy and entropy of syndiotactic polystyrene ", Polymer, 1990, Vol. 31, pp. 473-475

[GILG 71] GILG B., SKOULIOS A., “ Crystallization of polymers. IV. Structure of binary mixtures of poly (oxyethylene) of low molecular-weight “, Makromol. Chem., 1971, Vol. 140, pp. 149-

[GIRA 96] GIRARD-REYDET E., “ Phénomène de séparation de phase induit par une réaction chimique dans des mélanges thermoplasatiques/polyépoxy. Contrôle des morphologies et propriétés “ Thèse de doctorat, LMM, INSA de Lyon, 1996, p. 176

[GIRA 98] GIRARD-REYDET E., SAUTEREAU H., PASCAULT J.P., KEATES P., NAVARD P., THOLLET G., VIGIER G., “ Reaction induced phase separation mechanisms in modified thermosets“, Polymer, 1998, Vol. 39, pp. 2269-2278

[GOOD 98] GOODMAN S.H., “Handbook of thermoset plastics”, Westwood: New Jersey, Noyes Plublications, 1998, pp. 542.

[GREB 85] GREBOWICZ J., SUZUKI H., WUNDERLINCH B., " Heat Capacities of polyethylene and linear polyoxydes ", Polymer, 1985, Vol 26, pp. 1561-568

[GRIF 54] GRIFFIN W.C., “Calculation of HLB values of non-ionic surfactants“, J. of Soc. Cosmetic Chem., 1954, Vol. 5, pp. 249-258

[GROO 89] GROOTEN R., BRINKE G., " Enthalpy Relaxations in blends of Polystyrene and Poly(2-vinylpyridine) ", Macromolecules, 1989, Vol 22, n° 4, pp. 1761-1766

[GRUN 96] GRUNDKE K., UHLMANN P., GIETZELT T., REDLICH B., JACOBASCH H.-J., " Studies on the wetting behaviour of polymer melts on solid surfaces using the Wilhelmy balance method ", Colloids and Surface A: Phys and Eng. Aspects, 1996, Vol 116, pp. 93-104,

[GUO 01a] GUO Q., HARRATS C., GROENINCKX G., KOCH M.H.J., “ Miscibility, crystallization kinetics and real time small-angle X-Ray scattering investigation of the semicrystalline morphology in thermosetting polymer blends of epoxy resin and poly(ethylene oxide) “, Polymer, 2001, Vol 42, pp. 4127-4140



142

[GUO 01b] GUO Q., HARRATS C., GROENINCKX G., KOCH M.H.J., “ Miscibility, crystallization kinetics and real time small-angle X-Ray scattering investigation of the semicrystalline morphology in thermosetting polymer blends “, Polymer, Vol 42, 2001, pp. 6031-6041

[HALE 97] HALE A., HARVEY E.B., “Polymers blends and bock copolymers “, in Thermal Characterization of polymeric materials, Vol. 1, Ed. A. Turi, San Diego: Academic press, 1997, pp. 484-730.

[HAME 00] HAMERTON I., TAKEDA S., “A study of the polymerization of novel cyanate ester/acrylate blends “, Polymer, 2000, Vol 41, pp. 1647-1656

[HAME 98] HAMERTON I., HAY J.N., “Recent developments in the chemistry of cyanate ester”, Polym. Intern., 1998, Vol 47, pp. 465-473

[HARR 80] HARRISON I., RUNT J., " Incompatible Blends: Thermal Effects in a Model System ", J. Polym. Sci.: Part B., 1980, Vol 18, pp. 2257-2261

[HECK 00] HECK B., HUGEL T., IIJIMA M., STROBL G., " Steps in the formation of the partially crystalline state ", Polymer, 2000, Vol 41, pp. 8839-8848

[HEDR 92] HEDRICK J.L., LABADIE J., RUSSELL T., WAKHARKAR V., HOFER D., '' High Temperature Polymer Nanofoams '', Mat. Res. Soc. Symp. Proc., 1992, Vol 274, pp. 37-45

[HEDR 95] HEDRICK J.L., RUSSELL T., LABADIE J., LUCAS M., SWANSON S., " High temperature nanofoams derived from rigid and semi-rigid polyimides ", Polymer, 1995, Vol 36, n° 14, pp. 2685-2697

[HEDR 96] HEDRICK J.L., RUSSELL T.P., HEDRICK J.C., HILBORN J.G., “ Microporous Polycyanurate Networks “, J. Polym. Sci.: Part A, 1996, Vol 34, pp. 2879-2888

[HILD 64] HILDEBRAND J.H., SCOTT R.L., “The solubility of Non-Electrolytes”, New York: Dover, 1964, p. 488.

[HILL 97] HILLMYER M.A, LIPIC P.M., HAJDUK D.A., ALMDAL K., BATES F.S., " Self-Assembly and Polymerization of Epoxy Resin-Amphilic Block Copolymer Nanocomposite ", J. Am. Chem. Soc., 1997, Vol 119, pp. 2749-2750

[HOFF 62] HOFFMAN J.D., WEEKS J.J., “ Melting process and equilibrium melting temperature of polychlorotrifluoroethylene“, J. Res. Natl. Bur. Stand., 1962, Vol. 66A, pp. 13-25

[HOFF 76] HOFFMAN J.D., DAVIS G.T., LAURITZEN J.I., "Crystalline and Noncristalline Solids", in Treatise on solid State Chemistry, Vol. 3, Ed. N.B. Hannay, New York: Plenum, 1976, p. 580

[HOFF 83] HOFFMAN J.D., “Regime III crystallization in melt-crystallized polymers: The variable cluster model of chain folding”, Polymer, 1983, Vol. 24, pp. 3-26



143

[HONG 98] HONG B.K., JO W.H., LEE C.S., KIM J., “Correlation between melting

behaviour and polymorphism of syndiotactic polystyrene and its blend with poly(2,6-dimethyl-1,4-phenylene oxide), Polymer, 1998, Vol. 39, pp. 1793-1797.

[HORI 70] HORIE K., HIURA H., SAWADA M., MITA I., KAMBE H., “ Calorimetric investigation of polymerization reactions. III. Curing reaction of epoxides with amines”, J. Polym. Sci., 1970, Vol. 8, pp. 1357-1372

[HSIA 93] HSIAO B.S., SAUER B.B., " Glass Transition, Crystallisation and Morphology Relationships in Miscible Poly(Aryl Ether Ketones) and Poly(Ether Imide) Blends. ", J. Polym. Sci. Part B., 1993, Vol. 31, pp. 901-915

[HUAN 01] HUANG Y.P., WOO E.M., " Effects of entrapment on spherulite morphology and growth kinectics in poly(ethylene oxide)/epoxy networks ", Polymer, 2001, Vol 42, pp. 6493-6502

[HULT 97] HULTEEN J. MARTIN C.R., " A general template-based method for the preparation of nanomaterials ", J. Mater. Chem., 1997, Vol 7, pp. 1075-1087

[ILAV 87] ILLAVSKY M., HAVRANEK A., HROUZ J., LUÑAK S., DUSEK K., " the viscoelastic behaviour of diepoxide-diamine and diepoxide-triamine networks " in: Crosslinked Epoxies, Eds. Sedlacek B. and Kohovec J., Berlin: Walter de Gruyter, 1987, pp.433-441

[INOU 63] INOUE M., " Studies on Crystallization of High Polymers by Differential Thermal Analysis ", J. Poly. Sci. Part A., 1963, Vol 1, pp. 2697-2709

[ISHI 97] SHIKIRIYAMA K., WUNDERLICH B., " Melting of Poly(oxyethylene) Analyzed by Temperature-Modulated Calorimetry ", Macromolecules, 1997, Vol 30, pp. 4126-4131

[JACK 96] JACKSON C.L., MCKENNA G.B., " Vitrification and Crystallization of Organic Liquids Confined to Nanoscale Pores ", Chem. Mater. ACS, 1996, Vol 8, pp. 2128-2137

[JENS 98] JENSEN R.E., O'BRIEN E., WANG J., BRYANT J., WARD T.C., JAMES L.T., LEWIS D.A., " Characterization of Epoxy-Surfactant Interactions ", Proceedings of the 21st Annual Meeting of the Adhesion Society, Savannah Georgia (Ed. Ray A. Dickie), 1998, pp. 159-161

[JIAN 00] JIANG S., YU D., JI X., AN L., JIANG B., " Confined crystallization behaviour of PEO in silica networks ", Polymer, 2000, Vol 41, pp. 2041-2046

[JIAN 01] JIANG S., QIAO C., TIAN S., JI X., AN L., JIANG B., " Confined crystallization behaviour of PEO in organic networks ", Polymer, 2001, Vol 42, pp. 5755-5761

[JO 94] JO W.H., KO M.B., “ Effect of reactivity on cure and phase separation behavior in epoxy resin modified with thermoplastics polymer: a Monte-Carlo simulation”, Macromolecules, 1994, Vol. 27, pp. 7815-7824

[KALF 85] KALFOGLOU N.K., " Compatibility of Isotactic Polypropylene / Polycaprolactone Blends ", J. Appl. Poly. Sci., 1985, Vol 30, pp. 1987-1997



144

[KEIT 84] KEITH H.D., PADDEN F.J. Jr., “Twisting orientation and the role of transient states in polymer crystallization”, Polymer, 1984, Vol. 25, pp. 28-42

[KEIT 89] KEITH H.D., PADDEN F.J. Jr., LOTZ B., WITTMANN J.C., “Asymmetries of habit in polyethylene crystals grown from the melt”, Macromolecules, 1989, Vol. 22, pp. 2230-2238

[KELL 88] KELLER A., " Recent developments in morphology of crystalline polymers" in “Proceedings of the 17th Europhysics Conference on Macromolecular Physics“, July 1985, Berlin: Walter de Gruyter, 1986, Vol.2.

[KELL 95] KELLER A., " An Approach to Phase Behaviour in Polymers ", Macromol. Symp., 1995, Vol 98, pp. 1-42

[KIEF 96a] KIEFER J., POROUCHANI R., MENDELS D., FERRER J.B., FOND C., HEDRICK J.L., KAUSH H.H., HILBORN J.G., '' Macroporous epoxies via chemically induced phase separation", Symp. Proc. (microporous and macroporous materials) MRS, Vol 431, 1996, pp. 527-532

[KIEF 96b] KIEFER J., POROUCHANI R., HILBORN J.G., '' Macroporous epoxies via chemically induced phase separation: Influence of solubility parameter on the phase separation behaviour", in Proccedings of Polycondensation'96., Ed. A. Fradet, Paris, Zug: Huthing and Wepf, 1997, pp. 586-589

[KIEF 96c] KIEFER J., HILBORN J.G., MANSON J.-A.E., LETERRIER Y., HEDRICK J.L., " Macroporous Epoxy Networks via Chemically Induced Phase Separation ", Macromolecules, 1996, Vol 29, pp. 4158-4160

[KIEF 96d] KIEFER J., HEDRICK J.L., HILBORN J.G., " Chemically induced phase separation: A new technique for the synthesis of macroporous epoxies" , Polymer, 1996, Vol 37, pp. 5715-5725

[KIEF 97a] KIEFER J., HILBORN J.G., " Macroporous thermosets synthesized via chemically induced phase separation: A new approach towards void toughening " in: 10th Int. Conf. On deformation yield and Fracture, Cambridge: Cambridge Univ. Press, 1997, pp. 390-393

[KIEF 97b] KIEFER J., " Macroporous Thermosets via Chemically Induced Phase Separation", thése , No. 1725, Ecole Polytechnique Fédérale de Lausanne, Suisse, 1997, p. 176.

[KIM 91] KIM S.S., LLOYD D.R., " Microporous membrane formation via thermally-induced phase separation. III Effect of thermodynamic interactions on the structure of isotactic polypropylene membranes ", J. of Membrane Sci., 1991, Vol 64, pp. 13-29

[KIM 95] KIM S.C., KO M.B., JO W.H., " The effect of the viscosity of the epoxy prepolymer on the generated morphology in rubber-toughened epoxy resin ", Polymer, 1995, Vol 36, n° 11, pp. 2189-2195

[KINL 86] KINLOCH A.J., HUNSTON D.L., " Effect of volume fraction of dispersed rubbery phase on the toughness of rubber-toughened epoxy polymers ", J. Mat. Sci., 1992, Vol 5, pp. 1207-1209



145

[KOEN 75] KOENHEN D.M., SMOLDERS C.A., " The Determination of Solubility

Parameters Of Solvents and Polymers by Means of Correlations with Other Physical Quantities ", J. Appl. Polym. Sci., 1975, Vol 19, pp. 1163-1179

[KONI 68] KONINGSVELD R., STAVERMAN A.J., “ Liquid-liquid phase separation in multicomponent and polymer solutions”, J. Polym. Sci.Part A-2, 1968, Vol. 6, pp. 305-325

[KUMA 90] KUMAR V., SUH N.P., “A process for making microcellular parts“, Polym. Eng. Sci., 1990, Vol. 30, pp. 1323-1329

[KUMA 95] KUMAR G., NEELAKANTAN N.R., SUBRAMANIAN N., " Polyacetal and thermoplastic polyurethane elastomer toughened polyacetal: crystallinity and fracture mechanics ", J. Mat. Sci., 1995, Vol 30, pp. 1480-148

[KUO 94] KUO Y.M., WU C.T., WU W.H., CHAO D.Y., " Effect of Surfactants on the Particles Sizes of Red #170 Polyurea Microcapsules ", J. Appl. Polym. Sci., 1994, Vol 52, pp. 1165-1173

[LAUR 60] LAURITZEN J.L., HOFFMAN J.D., “Theory of formation of polymer crystals with folded chains in dilute “, J. Res. Nat. Bur. Std., 1960, Vol. 64A, pp. 73-82

[LERO 00] LEROY E., “ Etude et modélisation des propriétés de systèmes réactifs thermodurcissables en cours de réticulation pour la simulation du procédé RTM“, Thèse de doctorat, LMM, INSA de Lyon, 2000, p.210.

[LI 00] LI Y-S., CHANG F-C., " In-situ measurement of the crystallization process of polycarbonate/epoxy resin by a photoresistor ", Polymer, 2000, Vol 41, pp. 1731-1739

[LI 01] LI J., SHANKS R.A., OLLEY R.H., GREENWAY G.R., “ Miscibility and isothermal crystallization of polypropylene in polyethylene melts “, Polymer, 2001, Vol 42, pp. 7685-7694

[LIPI 98] LIPIC P.M., BATES F.S., HILLMYER M.A., " Nanostrutured Thermosets from Self-Assembly Amphilic Block Copolymer/Epoxy Resin Mixture ", J. Am. Chem. Soc., 1998, Vol 120, pp. 8963-8970

[LISS 73] LISSANT K.J., MAYHAN K.G., “Medium and high internal phase ratio water-polymer “, J. Coll. Interf. Sci., 1973, Vol. 42, pp. 201-208

[LITT 87] LITT M.H., HSIEH B.R., KRIEGER I.M., CHEN T.T., LU H.L., “Low surface energy polymers and surface-active block polymers. II. Rigid microporous foams by emulsion polymerization “, J. Coll. Interf. Sci., 1987, Vol. 115, pp. 312-329

[LLOY 91] LLOYD D.R., KIM S.S., KINZER K., "Microporous membrane formation via thermally-induced phase separation. II. Liquid-liquid phase separation ", J. of Membrane Sci., 1991, Vol 64, pp. 1-11

[LUNA 75] LUNAK S., DUSEK K., " Curing of epoxy resins. II. Curing of bisphenol A diglycidylether with diamines", J. Polym. Sci. Symp., 1975, Vol. 53, pp. 45-55



146

[MACH 92] MACHADO J.M., FRENCH R.N., " Miscible polyacetal-poly(vinyl phenol)

blends:2. Thermomechanical properties and morphology ", Polymer, 1992, Vol 33, n° 4, pp. 760-766

[MAIE 01] MAIER G. “Low dielectric constant polymers for microelectronics”,Prog. Polym. Sci., 2001, Vol. 26, pp. 3-65

[MANZ 81] MANZIONE L.T., GILLHAM J.K., " Rubber-Modified Epoxies. I. Transitions and Morphology ", J. Appl. Polym. Sci., 1981, Vol 26, pp. 889-905

[MARG 88] MARGARITIS A.G., KALFOGLOU N.K., " Compatibility of Poly(vinyl choride) with Polyalkyleoxides. I. Poly(methylene oxide) and Poly(ethylene oxide) ", J. Polym. Sci., Polym. Phys., 1988, Vol 26, pp. 1595-1612

[MART 00] MARTINS J.A., CRUZ-PINTO J.J.C., " Non-isothermal crystallization kinetics with instantaneous nucleation ", Polymer, 2000, Vol 41, pp. 6875-6884

[MART 84] MARTUSCELLI E., " Influence of Composition, Crystallization Conditions and Melt Phase Structure on Solid Morphology, Kinetics of Crystallization and Thermal Behavior of Binary Polymer/Polymer Blends ", Polym. Eng. Sci., 1984, Vol 24, n° 8, pp. 563-586

[MASA 00] MASAMOTO J., YAJIMA K., SAKURAI S., AIDA S., UEDA M., NOMURA S., " Microphase separation in polyoxymethylene end-capped with a long-chain alkyl ", Polymer, 2000, Vol 41, n° 10, pp. 7283-7287

[MASO 96] MASOOD-SIDDIQI H., DUMON M., PASCAULT J.P., “ Polymer-dispersed liquid crystals based on epoxy networks: 1. Effects of the liquid crystal addition on the epoxy-amine reaction“, Polymer, 1996, Vol. 37, pp. 20-27

[MASO 97] MASOOD-SIDDIQI H., “Dispersion de cristaux liquides nématiques dans des matrices polymères thermodurcissables polyépoxyde : étude des cinétiques chimiques et des phénomènes de séparation de phase “ Thèse de doctorat, LMM, INSA de Lyon, 1997, p. 192.

[MATE 91] MATEJKA L., " Rheology of epoxy networks near the gel point ", Polymer Bulletin, 1991, Vol 26, pp. 109-116

[MATH 99] MATHEW D., REGHUNADHAN-NAIR C.P., KRISHNAN K., “Catalysis of the cure reaction of bisphenol A dicyanate A-DSC study”, J. Poly. Sci. Part A., 1999, Vol. 37, pp. 1103-1114

[MATO 00] MATOS-RUIZ M., “Mise en œuvre et propriétés physiques et mécaniques de matériaux nanocomposites à matrice époxy renforcée par des trichites de cellulose “ Thèse de doctorat, LMM, INSA de Lyon, 2000, p.208

[MEZZ 00a] MEZZENGA R., BOOGH L., MANSON J-A.E., " Evaluation of Solubility parameters during Polymerization of Amine-Cured Epoxy Resins", J. Polym. Sci. Part B., 2000, Vol 38, pp. 1883-1892

[MEZZ 00b] MEZZENGA R., BOOGH L., MANSON J-A.E., " A Thermodynamic Model for Thermoset Polymer Blends with Reactive Modifiers ", J. Polym. Sci. Part B., 2000, Vol 38, pp. 1893-1902



147

[MILL 76] MILLER D.R., MACOSKO C.W., “ A new derivation of average molecular weights of nonlinear polymers “, Macromolecules, 1976, Vol. 9, pp. 206-215

[MONT 99] MONTSERRAT S., CIMA I., “ Isothermal curing of an epoxy resin by alternating differential scanning calorimetry” Thermochimica Acta, 1999, No. 4686, pp.10-22

[MOOR 72] MOORE W.J., “ Physical Chemistry”, 4th ed., New Jersey: Prentice-Hall, 1972, p. 134

[MORG 00] MORGEN M., RYAN E., ZHAO J-H., HU C., CHO T., HO P., “Low dielectric constant materials for ULSI interconnects”, Annu. Rev. Mater. Sci., 2000, Vol. 30, pp. 645-680

[NIEL 69] NIELSEN L.E., “Crosslinking effect on physical properties of polymers“, J. Macromol. Sci. Rev., Macromol. Chem., 1969, Vol. C3, pp. 69-103

[OH 00] OH J., REY A.D., " Theory and simulation of polymerization-induced phase separation in polymeric media ", Macromol. Theory Simul., 2000, Vol 9, pp. 641-660

[OLAB 79] OLABISI O., ROBESON LL., SHAW M., “ Polymer-Polymer Miscibility”, New York: Academic Press , 1979, pp. 362

[OUGI 96] OUGIZAWA T., SHIMOMAI K., HIGASHIDA N., RUDOLF B., KRESSLER J., INOUE T., “ Application of equation of state theory to poly(styrene-co-acrylonitrile)/poly(methyl methacrylate) blends”, European Symposium on Polymer Blends, Maastricht, 1996, pp. 434-436

[OYAN 96] OYANGUREN P.A., FRONTINI P.M., WILLIAMS R.J.J., GIRARD-REYDET E.,PASCAULT J.P., ‘’Reaction-induced phase separation in poly(butylene terephthalate) – epoxy systems: 1. Conversion-temperature transformation diagrams’’, Polymer, 1996, Vol. 37, n° 14, pp. 3079-3092

[PAGE 00] PAGE S.A., MEZZENGA R., BOOGH L., BERG J.C., MANSON J-A.E., " Surface Energetics Evolution during Processing of Epoxy Resins ", J. of Colloid Interface Sci., 2000, Vol 222, pp. 55-62

[PAGE 01] PAGE S.A., BERG J.C., MANSON J-A.E., "Characterization of epoxy resin surface energetics ", J. Adhesion Sci. Technol., 2001, Vol 15, n° 2, pp. 153-170

[PARK 00] PARK J-Y., KWON M.H., PARK O.O., " Non-isothermal Crystallization Behavior of SPS/APS Blends ", Polymer, 2000, Vol 38, pp. 3001-3008

[PARK 89] PARK J.S., RUCKENSTEIN E., "Selective Permeation through Hydrophobic-Hydrophilic Membranes ", J. Appl. Polym. Sci., 1989, Vol 28, pp. 453-461

[PASC 90] PASCAULT J.P., WILLIAMS R.J.J., ‘’Glass transition temperature versus conversion relationship for thermosetting polymers’’, J. of Polym. Sci. Part B, Polymer Phys, 1990, Vol. 28, pp. 86-95

[PASC 99] PASCAULT J.P., WILLIAMS R.J.J., “Formulation and characterization of thermoset-thermoplastic blends“ in Polymer Blends, Volume 1,Edited by D.R. Paul, C.B. Bucknall, New York: John Wiley,2000 pp. 379.



148

[PEEB 71] PEEBLES L.H., “Molecular Weight Distribution of Polymers”, New York:

Interscience, Wiley, 1971, p. 253

[PELZ 72] PELZBAUER Z., GALESKI A., “Growth rate and morphology of polyoxymethylene supermolecular structures“, J. Polym. Sci. Part C., 1972, Vol. 38, pp. 23-32

[PHIL 97] PHILLIPS R., MANSON J-A. E., " Prediction and Analysis of Non-Isothermal Crystallization of Polymers ", J. Polym. Sci. Part B., 1997, Vol 35, pp. 875-88

[PIER 97] PIERRE A., “Aptitude à la déformation de polymères thermodurcissables appliqués en couche mince sur un substrat métallique “ Thèse de doctorat, LMM, INSA de Lyon, 1997, p. 218

[PIGL 00] PIGLOWSKI J., GANCARAZ I., WLAZLAK M., KAMMER H-W., " Crystallization in modified blends of polyamide and polypropylene ", Polymer, 2000, Vol 41, pp. 6813-6824

[PLUM 94a] PLUMMER C.J.G., KAUSH H.-H., " A DSC investigation of the crystallization kinetics of polyoxymethylene ", Polymer Bulletin, 1994, Vol 32, pp. 117-124

[PLUM 94b] PLUMMER C.J.G., KAUSH H.-H., " Non-isothermal crystallization in polyoxymethylene ", J. Mat. Sci. Letters, 1994, Vol 13, pp. 856-859

[PLUM 95a] PLUMMER C.J.G., MENU P., CUDRE-MAUROUX N., KAUSH H.-H., " The effect of Crystallization Conditions on the properties of Polyoxymethylene ", J. Appl. Polym. Sci., 1995, Vol 55, pp. 489-500

[PLUM 95b] PLUMMER C.J.G., KAUSH H.-H., "DSC non-isothermal crystallization curves in polyoxymethylene", J. Colloid Polym. Sci., 1995, Vol 273, pp. 227-232

[PLUM 96] PLUMMER C.J.G., KAUSH H.-H., " The effect of melting point distributions on Dsc melting peaks ", Polymer Bulletin, 1996, Vol 36, pp. 355-360

[PRIN 80] PRINCEN H.M., ARONSON M.P., MOSER J.C., “Highly concentrated emulsions. II. Real systems. The effect of film thickness and contact angle on the volume fraction in creamed emulsions“, J. Coll. Interf. Sci., 1980, Vol. 75, pp. 246-258

[RAME 94a] RAMESH N.S., RASMUSSEN D., CAMPBELL G.A., “ The heterogeneous nucleation of microcellular foams assisted by the survival of microvoids in polymers containing low glass transition particles. Part I. Mathematical modeling and numerical simulation“, Polym. Eng. Sci., 1994, Vol. 34, pp. 1685-1697

[RAME 94b] RAMESH N.S., RASMUSSEN D., CAMPBELL G.A., “ The heterogeneous nucleation of microcellular foams assisted by the survival of microvoids in polymers containing low glass transition particles. Part II. Experimental results and discussion “, Polym. Eng. Sci., 1994, Vol. 34, pp. 1698-1706



149

[RICC 84] RICCARDI C.C., ADABBO H.E., WILLIAMS R.J.J., “ Curing reaction of epoxy resins with diamines “, J. Appl. Polym. Sci., 1984, Vol. 29, pp. 2481-2492

[RICC 86] RICCARDI C.C., WILLIAMS R.J.J., “A Kinetic scheme for an amine-epoxy reaction with simultaneous etherification“, J. Appl. Polym. Sci., 1986, Vol. 36, pp. 2481-2492

[RICC 94] RICCARDI C.C., BORRAJO J., WILLIAMS R.J.J. , ‘’Thermodynamic analysis of phase separation in rubber-modified thermosetting polymers: influence of the reactive polymer polydispersity’’, Polymer, 1994, Vol. 35, pp. 5541-5550

[RICC 98] RICCARDI C.C., BORRAJO J., WILLIAMS R.J.J., SIDDIQUI H.M., DUMON M., PASCAULT J.P., ‘’Multiple Phase Equilibria in Polydisperse Polymer/Liquid Crystal Blends’’, Macromolecules, 1998, Vol. 31, pp. 1124-1132

[RICH 00] RICHER S., “Stabilité thermique et dégradation sous atmosphère contrôlée de prépolymères thermostables à terminaisons propargylique et cyanate’’ Thèse de doctorat, Université Claude Bernard, Lyon 1, 2000, p. 291

[RIEW 89] RIEW C.K., SMITH R.W., " Morphology of Rubber-Toughened Polycarbonate ", in Toughened Plastics ’’, Ed. C. K Riew, , Washington, DC: American Chemical Society, 1989, pp. 225-241, (ACS Advances in Chemistry Series n° 222)

[RIM 84] RIM P.B, RUNT J.P., “ Melting point depression in crystalline/compatible polymer blends “; Macromolecules, 1984, Vol. 17, pp. 1520-1528

[ROBE 81] ROBENSON L.M., HALE W.F., MERRIAM C.N., “ Miscibility of the poly(hydroxy ether) of bisphenol A with water-soluble polyether “, Macromolecules, 1981, Vol 14, pp. 1644-1650

[ROEL 94] ROELS T., DEBERDT F., BERGHMANS H., “ Solvent quality and phase stability in syndiotactic polystyrene-solvent systems “, Macromolecules, 1994, Vol 27, pp. 6216-6220

[ROZE 86] ROZENBERG B.A., “Kinetics, thermodynamics and mechanism of reaction of epoxy oligomer with diamines” in “Epoxy resins and composites I”, K. Dusek ed., Berlin, Springer Verlag, Adv. Polym. Sci., 1986, Vol. 72, pp. 113-165

[RUCK 88] RUCKENSTEIN E., KIM K.J., " Polymerization in Gel-Like Emulsions ", J. Appl. Polym. Sci., 1988, Vol 36, pp. 907-923

[RUCK 91a] RUCKENSTEIN E., PARK J.S., " New Method for the preparation of Thick Conducting Polymer Composites ", J. Appl. Polym. Sci., 1991, Vol 42, pp. 925-934

[RUCK 91b] RUCKENSTEIN E., CHEN H.H., " Preparation of Water-Permselective Composite Membrane by the Concentrated Emulsion Method: Its Swelling and Permselectivity Characteristics ", J. Appl. Polym. Sci., 1992, Vol 42, pp. 2429-2434



150

[RUCK 92] RUCKENSTEIN E., SUN F., " A New Concentrated Emulsion Polymerization Pathway ", J. Appl. Polym. Sci., 1992, Vol 46, pp. 1271-1277

[RUCK 94] RUCKENSTEIN E., LI H., " Toughened Polystyrene Composites by the Concentrated Emulsion Pathway ", J. Appl. Polym. Sci., 1994, Vol 52, pp. 1949-1958

[RUNT 00] RUNT J., "Crystalline Polymer Blends”, in Polymer Blends, Volume 1, Ed. Paul D.R. and Bucknall C.B., New York: Academic Press, 2000, p.379.

[RUNT 81] RUNT J., " Polymer Blends Containing Isotactic Polystyrene: Thermal Behaviour of Model System ", Macromolecules, 1981, Vol 14, pp. 420-423

[RUNT 87] RUNT J., WAGNER R.F., ZIMMER M., " Ultimate Elastic Modulus and Melting Behavior of Poly(oxymethylene) ", Macromolecules, 1987, Vol 20, pp. 2531-2535

[RYAN 90] RYAN A.J., "Spinodal decomposition during bulk copolymerization: Reaction Injection Moulding ", Polymer, 1990, Vol 31, pp. 707-712

[RYBN 66] RYBNIKA F., “Krystallisation und Struktar des Polyformaldehyds“ , F. Collect. Czech. Chem. Commun, 1966, Vol. 31, pp. 4080-4089

[SABR 87] SABRA A., LAM T.M., PASCAULT J.P., GRENIER-LOUSTALOT M.F., GRENIER P., " Characterization and behaviour of epoxy based diaminodiphenylsulfone networks", Polymer, 1987, Vol. 28, pp. 1030-1036

[SAMU 75] SAMUELS R.J., “Quantitative Structural Characterization of the Melting Behavior of Isotactic Polypropylene“, J. Polym. Sci., Polym. Ed. Phys., 1975, Vol. 13, pp. 1417-1446.

[SASA 95] SASAKI H., BALA P.K., YOSHIDA H., ITO E., " Miscibility of PVDF/PMMA blends examined by crystallization dynamics ", Polymer, 1995, Vol 36, n° 25, pp. 4805-4810

[SAUE 00] SAUER B.B., MCLEAN R.S., LONDONO J.D., " Morphological Changes During Crystallization and Melting of Polyoxymethylene Studied by Synchroton X-Ray Scattering and Modulated Differential Scanning Calorimetry ", J. Macromol. Sci.-Phys., 2000, Vol 4, pp. 519-534

[SAUE 91] SAUER B.B., DIPAOLO N.V., “ Surface tension and dynamic wetting of polymers using the Wihelmy method: applications to high molecular weights and elevated temperatures “, J. Colloid. Interface Sci., 1991, Vol. 144, pp. 527-535

[SAUE 97] SAUER B.B., AVAKIAN P., FLEXMAN E., KEATING M., HSIAO B., VERMA R., “A.C. Dielectric and TSC Studies of Constrained Amorphous Motions in Flexible Polymers Including Poly(OxyMethylene) and Miscible Blends”, J. Polym. Sci. Part B., 1997, Vol. 35, pp. 2121-2132

[SCIL 95] SCILIANO A., SEVES A., De MARCO T., CIMMINO S., MARTUSCELLI E., SILVESTRE C., " Miscibility and Thermal and Crystallization behaviours of Poly (D-(-)-3-hydroxybutyrate) atacatic Poly(methyl methacrylate) Blends ", Macromolecules, 1995, Vol 28, pp. 8065-8072



151

[SHAB 00] SHABANA H.M., OLLEY R.H., BASSETT D.C, JUNGNICKEL B-J., " Phase separation induced by crystallization in blends of polycaprolactone and polystyrene: an investigation by etching and electron microscopy ", Polymer, 2000, Vol 41, pp. 5513-5523

[STAR 88] STARWEATHER H.W., JONES G., ZOLLER P., “ The pressure-Volume- Temperature Relationship and the Heat of Fusion of Polyoxymethylene”., J. Polym. Sci. Part B., 1988, Vol. 26, pp. 257-266

[STEI 01] STEINMANN S., GRONSKI W., FRIEDRICH C., " Co-continuous polymer blends: influence of viscosity and elasticity ratios of the constituent polymer on phase inversion ", Polymer, 2001, Vol 42, pp. 6619-6629

[STOC 52] STOCKMAYER W.H., " Molecular Distribution in Condensation Polymers ", J. Polym. Sci, 1952, Vol 9, n°1, pp. 69-71

[SUE 92] SUE H., " Craze-like damage in a core-shell rubber-modified epoxy system ", J. Mat. Sci., 1992, Vol 27, pp. 3098-3107

[SUN 00] SUN Y.S., WOO E.M., “Mechanisms of Reorganization of Lamellae in Syndiotactic Polystyrene”, J. of Polym. Sci. Part B., 2000, Vol. 38. pp. 3210-3221.

[SUZU 85] SUZUKI H., WUNDERLINCH B., " Heat Capacities of Liquid Linear Aliphatic Polyoxydes ", J. Polym. Sci.: Polym. Phys., 1985, Vol 23, pp. 1671-1679

[SVEC 95] SVEC F., FRECHET J.M., " Temperature, a simple and efficient tool for the control of pore size distribution in macroporous polymers ", Macromolecules, 1995, Vol 28, pp. 7580-7582

[TADR 88a] TADROS T., " Considérations sur les aspects actuels des émulsions et dispersions: 1 partie ", Informations Chimie, 1988, n°293, pp. 159-165

[TADR 88b] TADROS T., " Considérations sur les aspects actuels des émulsions et dispersions: 2 partie ", Informations Chimie, 1988, n°294, pp. 291-304

[TAKA 79] TAKAHASHI Y., TADAKORO H., “ Least-squares Refinement of Molecular structure of Polyoxymethylene ” J. Polym. Sci. Part B, 1979, Vol 17, pp. 132-130

[TAKA 94] TAKAMATSU S., KBAYASHI T., KOMOTO T., SUGIURA M., OHARA K., " Morphology of polyoxymethylene-based polymer alloys ", Polymer, 1994, Vol 35, n° 17, pp. 3598-3603

[TANA 92] TANAKA N., " Prediction of solubility parameter from thermal transitions behaviour in polymers ", Polymer, 1992, Vol 33, n° 3, pp. 623-626

[UCHI 67] UCHIDA T., TADAKORO H., “ Structural Studies of Polyethers. IV.. Structure Analysis of the Polyoxymethylene Molecule by Three-Dimensional Fourier Syntheses”, J. Poly. Sci. Part B, 1967, Vol 5, pp. 63-81

[VAN 90] VAN-KREVELEN D.W., “Properties of Polymers: their correlation with chemical structure, their numerical estimation nd prediction from additive group contribution”, Amsterdam: Elsevier, 1990, p. 875



152

[VAZQ 87] VÁZQUEZ A., ROJAS A.J., ADABBO H.E., WILLIAMS R.J.J., ‘’Rubber-

modified thermosets: Prediction of the particle size distribution of dispersed domains’’, Polymer, 1987, Vol. 28, pp. 1156-1164

[VAZQ 90] VAZQUEZ A., MATEJKA L., SPACEK P., DUSEK K., " Polymerization of epoxides in the presence of tertiary amino alcohols", J. Polym. Sci. Polym. Chem., 1990, Vol. 28, pp. 2305-2319

[VEEN 00a] VEENSTRA H., VERKOOIJEN P.C.J., LENT B.J.J., DAM J.V., BOER A.P., POSTHUMA A., NIJHOF H.J., " On the mechanical properties of co-continuous polymers blends: experimental and modelling ", Polymer, 2000, Vol 41, pp. 1817-1826

[VEEN 00b] VEENSTRA H., DAM J.V., BOER A.P., POSTHUMA A., " On the coarsening of the co-continuous morphologies in polymer blends: effect of interfacial tension, viscosity and physical cross-links ", Polymer, 2000, Vol 41, , pp. 3037-3045

[VELI 86] VELISARIS C.N., SEFERIS J.C., " Crystallization Kinetics of Polyetheretherketone (PEEK) Matrices " Polym. Eng. Sci., 1986, Vol 26, n° 22, pp. 1574-1581

[VEND 94] VENDERBOSCH R.W., MEIJER H.E.H., LEMSTRA P.J., “ Processing of intractable polymers using reactive solvents: 1. Poly(2,6-dimethyl-1,4-phenylene ether)/epoxy resin “, Polymer, 1994, Vol 35, n° 20, pp. 4349-4357

[VERC 89] VERCHERE D., “Réseaux Epoxy modifiés par des élastomères. Séparation de phase . Morphologie et propriétés mécaniques”, Thèse de doctorat, LMM, INSA de Lyon, 1989, p. 248.

[VERC 91] VERCHERE D., PASCAULT J.P., SAUTEREAU H., MOSCHIAR M., RICCARDI C.C., ‘’Rubber-Modified Epoxies. II. Influence of the Cure Schedule and Rubber Concentration on the Generated Morphology’’, J. of Appl. Polym. Sci., 1991, Vol. 42, pp. 701-716

[VERC 93] VERCHERE D., SAUTEREAU H., PASCAULT J.P., RICCARDI C.C., MOSHIAR S.M., WILLIAMS R.J.J., ‘’Rubber-Modified Epoxies Analysis of the phase separation process’’, in Rubber-Toughened Plastics’’, Eds C. K Riew and J.K. Gillham, Washington, DC: American Chemical Society, 1993, pp.335-361 (ACS Advances in Chemistry Series n°233)

[VINH 96] VINH-TUNG C., LACHENAL G., CHABERT B., PASCAULT J.P., ’’Rheological monitoring of phase separation induced by chemical reaction in thermoplastic-modified epoxy’’ in Toughened Plastics II’’, Eds C. K Riew and J.K. Gillham, Washington DC: American Chemical Society, 1996, pp. 56-74 (ACS Advances in Chemistry Series )

[WAKI 93] WAKINO K., OKADA T., YOSHIDA N., TOMONO K., “A new equation for predicting the dielectric constant of a mixture”, J. Am. Ceram. Soc., 1993, Vol. 76, pp. 2588-2598

[WAKK 92] WAKKER A., DIJK M.A., " Predicting Polymer Blend Miscibility: Dispersive Versus Specific Interactions ", Polym. Networks Blends, 1992, Vol 2, pp. 123-133



153

[WEST 88] WEST J.L., “ Phase separation of liquid crystals in polymers”, Mol. Cryst.

Liq. Cryst., 1988, Vol. 157, pp. 427-441

[WILL 84] WILLIAMS R.J.J, BORRAJO J., ADABBO H.E., ROJAS A.J., in ‘Rubber-Modified Thermoset Resins’, Eds C. K Riew and J.K. Gillham, Washington, DC: American Chemical Society, 1984, pp. 195-212 (ACS Advances in Chemistry Series n° 208)

[WILL 97] WILLIAMS R.J.J., ROZENBERG B.A., PASCAULT J.P., “Reaction-Induced Phase Separation in Modified Thermosetting Polymers” in Adv. In Polym. Sci., 1997, Vol. 128, pp. 95-156

[WILL 99] WILLEMSE R.C., SPEIJER A., LANGERAAR A.E., POSTHUMA de BOER A., " Tensile moduli of co-continuous polymer blends ", Polymer, 1999, Vol 40, pp. 6645-6650

[WUND 73] WUNDERLICH B., “Macromolecular Physics”, Vol. 3, “Crystal Melting” New York: Academic Press, 1973, p. 390.

[WUND 97] WUNDERLICH B., “The Basis of Thermal Analysis“, in Thermal Characterization of polymeric materials, Vol. 1, Ed. A. Turi, San Diego: Academic Press, 1997, pp. 206-472.

[XU 01] XU W., HE P., " Isothermal Crystallization Behavior of Polyoxymethylene with and without Nucleating Agents ", J. Appl. Polym. Sci., 2001, Vol 80, pp. 304-310

[YAMA 90] YAMANAKA K., INOUE T., " Phase separation mechanism of rubber-modified epoxy ", J. Mat. Sci., 1990, Vol 25, pp. 241-245

[YEA 99] YEA F., HSIAO B., CHU B., SAUER B., FLEXMAN E., “Effect of Miscible Polymer Diluents on the Development of Lamellar Morphology in Poly(oxymethylene) Blends, J. Polym. Sci. Part B., 1999, Vol 37, pp. 3115-3122

[ZHON 00] ZHONG Z., GUO Q., " Crystallization kinetics of miscible thermosetting polymer blends of novalac resin and poly(ethylene oxide) ", Polymer, 2000, Vol 41, pp. 1711-1718

[ZHU 99] ZHU X.X., BANANA K., LIU H.Y., KRAUSE M., YANG M., " Cross-Linked Porous polymer Resins with Reverse Micellar Imprints: Factors Affecting the Porosity of the Polymers ", Macromolecules, 1999, Vol 32, pp. 277-281

Documents

Mélanges réactifs Thermodurcissable / Additifs extractibles : …csidoc.insa-lyon.fr/these/2002/garcia_loera/references.pdf · · 2005-02-09between phase behaviour and morphology