Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
www.thinklogical.com
tm
SDI EXTENSION - Xtreme 3G Series
The Logical Solution - Serial Digital Interface Extension
SDIXtreme3G
3G SDI Fiber Optic Extension
The SDI Xtreme 3G product series is a compact, broadcast quality, SDI over �ber extension system. The system is
designed to transmit SD, HD, and 3G SDI signals with or without embedded audio and data, as well as DVB/ASI at 270
mbit/s. In addition, this �ber based transport system gives users the assurances that each signal is immune to video
pathological signals over the entire length of the �ber interconnect. The system also supports either single or multi-
mode �ber, and is SMPTE 424M, 292M, 259M, and 297M compliant.
The SDI Xtreme 3G provides industry leading performance and reliable media conversion for a wide variety of applica-
tions. Therefore, it is an ideal solution for Pro A/V, broadcast, and corporate studio applications, including video produc-
tion and editing, (ENG) sports tele-production, �eld production, cross-town �ber links, cross on–campus production,
pre–�bered venues, courtesy feeds and many more.
SDI EXTENSION - SDI Xtreme 3G Series
Multi-standard operation from 270 mbit/s
to 3Gbit/s
Supports HD/SD-SDI inputs with embedded
audio and ancillary data
Distribute uncompressed broadcast quality
signals over single mode �ber up to 40 km.
(24 miles) and up to 1000 meters over
multi-mode �ber
SMPTE 424M, 292M, 259M, and 297M
compliant
www.thinklogical.com
The System
SDI EXTENSION - SDI Xtreme 3G Series
The reliability of the SDI Xtreme 3G stems from the quality of its design and construction, with advanced integrated
re-clocking circuitry designed into the transmitter and receiver. Equalized and re-driven SDI loop-through is also
provided on the transmitter and re-clocked SDI outputs are provided on the receiver. These key features provide
assurance that the signal is equalized and re-clocked prior to �ber transmission; therefore it retains all of the signals’
initial parameters allowing for pristine output. In addition, front panel status LEDs indicate system activity and link
activity.
Installation possibilities are expanded with built-in support for either multi-mode or single mode �ber, making this a
convenient and cost e�ective solution to combat the restrictions involved with the distribution of uncompressed
broadcast quality video signals over long distances. In addition, the SDI Xtreme 3G is fully compatible with
Thinklogical's VX Router line of products.
Power Supply
Power Supply
SDI Video
Fiber
SDIXtreme 3G Transmitter
Fiber Connection
SDIXtreme 3G Receiver
Remote Video
Local Video
Power
Typical application extending SDI video using SDI Xtreme 3G
(required)
SDI Equipment
▼
▼
3G SDI Fiber Optic Extension
TRANSMITTER
OUT
IN
PWR PWR LOCKHD
OUT
PWR LOCKHD
▼
▼
OUT
PWR
OUT
IN
3G SDI Fiber Optic Extension
RECEIVER
SDI Display
up to 40 km. (24 miles)
www.thinklogical.com
VIDEO EXTENSION - SeriesSDI EXTENSION - Xtreme 3G SeriesSDI EXTENSION - SDI Xtreme 3G Series
Multi-standard operation from 270 mbit/s
to 3Gbit/s
Supports HD/SD-SDI inputs with embedded
audio and ancillary data
Signals are equalized and re-clocked on
the receiver
Equalized and re-clocked SDI loop through
on the transmitter
Signal transmission via �ber optic cable;
no RF interference
Supports both single mode and multi-mode
�ber types
SMPTE 424M, 292M, 259M, and 297M compliant
Cable equalization on inputs and cable drivers
on outputs to ensure signal integrity
15 dB Optical Link Budget @ 2.97 Gbps
Hot Swappable/Pluggable SFP optics with
LC connectors
Distribute uncompressed broadcast quality
signals over single mode �ber up to 40 km.
(24 miles) and up to 1000 meters over
multi-mode �ber
Key Features
▼
▼
3G SDI Fiber Optic Extension
TRANSMITTER
SDI Xtreme 3 G
OUT
IN
PWR PWR LOCKHD
OUT
PWR
LOCK
HD
▼
▼
OUT
PWR
OUT
IN
3G
SD
I F
ibe
r O
ptic
Exte
nsi
on
RECEIVER
SD
IXtr
em
eG
RS-232
CONSOLE
RESET
LAN
USB
FAULT
CONTROLLER CONTROLLER I/O CARD I/O CARD I/O CARD I/O CARD I/O CARD I/O CARD I/O CARD I/O CARDI/O CARD I/O CARD I/O CARD I/O CARD I/O CARD I/O CARD I/O CARD I/O CARD
RS-232
CONSOLE
LAN
USB
FAULT
T
R
T
R
T
R
T
R
T
R
T
R
T
R
T
R
T
R
T
R
T
R
T
R
T
R
T
R
T
R
T
R
T
R
T
R
T
R
T
R
T
R
T
R
T
R
T
R
T
R
T
R
T
R
T
R
T
R
T
R
T
R
T
R
T
R
19
20
17
18
15
16
13
14
11
12
9
10
7
8
5
6
3
4
1
2
19
20
17
18
15
16
13
14
11
12
9
10
7
8
5
6
3
4
1
2
19
20
17
18
15
16
13
14
11
12
9
10
7
8
5
6
3
4
1
2
19
20
17
18
15
16
13
14
11
12
9
10
7
8
5
6
3
4
1
2
19
20
17
18
15
16
13
14
11
12
9
10
7
8
5
6
3
4
1
2
19
20
17
18
15
16
13
14
11
12
9
10
7
8
5
6
3
4
1
2
19
20
17
18
15
16
13
14
11
12
9
10
7
8
5
6
3
4
1
2
19
20
17
18
15
16
13
14
11
12
9
10
7
8
5
6
3
4
1
2
19
20
17
18
15
16
13
14
11
12
9
10
7
8
5
6
3
4
1
2
19
20
17
18
15
16
13
14
11
12
9
10
7
8
5
6
3
4
1
2
19
20
17
18
15
16
13
14
11
12
9
10
7
8
5
6
3
4
1
2
19
20
17
18
15
16
13
14
11
12
9
10
7
8
5
6
3
4
1
2
19
20
17
18
15
16
13
14
11
12
9
10
7
8
5
6
3
4
1
2
19
20
17
18
15
16
13
14
11
12
9
10
7
8
5
6
3
4
1
2
19
20
17
18
15
16
13
14
11
12
9
10
7
8
5
6
3
4
1
2
19
20
17
18
15
16
13
14
11
12
9
10
7
8
5
6
3
4
1
2
POWER POWER POWER POWER POWER POWER POWER POWER POWER POWER POWER POWER POWER POWER POWER POWERACTIVE ACTIVE
ALARM
UPSTREAM UPSTREAMDOWNSTREAM DOWNSTREAMCONTROL
SDI Equipment/Display
SDI Xtreme 3G
Transmitter
Fiber
CableThinklogical’s
VX 160 Router
HD, SD, 3G SDI Source
HD, SD, 3G SDI Loop Through
Extension
up to 40 km.SDI Xtreme 3G
Receiver
Supports pathological patterns at all rates
www.thinklogical.com
Specifications
SDI EXTENSION - Xtreme 3G Series
VIDEO EXTENSION - Series
SDI EXTENSION - Xtreme 3G Series
Indicators: (3) Power, Data Rate HD, SD – Lock Detect
Dimensions: 4.96 x 2.25 x 1.03 (in) – 125.98 x 57.12 x 26.14 (mm)
Weight: ≈ 1 lb. (≈ 0.45 kg.)
Power: 5-12 VDC @< 1AMP
Operating Temperature: -5º C to +50º C
TRANSMITTER Speci!cations: ALL FIBER SPECS REFLECT SINGLE-MODE FIBER
Number of Inputs 1
Data Rate Range 270Mbps to 2.97 Gbps
Supported Standards SMPTE 259M, 292, 297, 424M
DVB-ASI
Re-clocked Data Rates 270 Mbps (SMPTE 259M, DVB-ASI-270), 1.485 Gbps (SMPTE 292), 2.97 Gbps (SMPTE 494M)
Equalization Automatic up to 140m of Belden 1694A at 3.0 Gbps, 230m at 1.485 Gbps and 350m at 270 Mbps
Return Loss >10dB up to 2.97 Gbps
Number of Outputs 1 Rise/Fall Time < 135 ps at 2.97 Gbps per SMPTE 424M;
Signal Level 800mV ± 10% < 270 ps at 1.485 Gbps per SMPTE 292;
DC O#set 0V ± 0.5V 0.4 ns to 1.5 ns at 270 Mbps per SMPTE 259M
Overshoot < 10% of amplitude Re-clocking At 270 Mbps, 1.485 Gbps & 2.97 Gbps
Timing Jitter < 0.2 UI at 270 Mbps; < 1.0 UI at 1.485 Gbps;
< 0.2 UI at 2.97 Gbps with color bar signal
Alignment Jitter < 0.2 UI at 270 Mbps; < 1.0 UI at 1.485 Gbps;
< 0.3 UI at 2.97 Gbps with color bar signal
Optical Output
Connector LC receptacle
Wavelength 1310nm (nominal)
Emmiter Type FP Laser
Output Power (nominal) -3.0 dBm at 270 Mbps;
-3.0 dBm at1.485 Gbps;
-3.0 dBm at 2.97 Gbps
Re-clocking At 270 Mbps, 1.485 Gbps & 2.97 Gbps
SPECIFICATIONS
RECEIVER Speci!cations: ALL FIBER SPECS REFLECT SINGLE-MODE FIBER
Fiber Input
Connector LC receptacle
Wavelength 1270 - 1610 nm
Minimum Input Sensitivity -18 dBm at 2.97 Gbps;
-19 dBm at 1.485 Gbps
Maximum Input Power 0 dBm
Number of Outputs 2 Rise/Fall Time < 135 ps at 2.97 Gbps per SMPTE 424M;
Signal Level 800mV ± 10% < 270 ps at 1.485 Gbps per SMPTE 292;
DC O#set 0V ± 0.5V 0.4 ns to 1.5 ns at 270 Mbps per SMPTE 259M
Overshoot < 10% of amplitude Re-clocking At 270 Mbps, 1.485 Gbps & 2.97 Gbps
Timing Jitter < 0.2 UI at 270 Mbps; < 1.0 UI at 1.485 Gbps;
< 0.2 UI at 2.97 Gbps with color bar signal
Alignment Jitter < 0.2 UI at 270 Mbps; < 1.0 UI at 1.485 Gbps;
< 0.3 UI at 2.97 Gbps with color bar signal
SDI EXTENSION - Xtreme 3G Series
100 Washington Street Contact a Thinklogical Sales Representative at Milford, CT 06460 USA [email protected] or (203) 647-8700
tm
© 2009 Thinklogical. All rights reserved.
Thinklogical, claims or other product information
contained in this document are subject to change
without notice. This document may not be reproduced,
in whole or in part, without the express written consent
of Thinklogical.
SDI XTREME 3G: SINGLE MODE
Part Number and Description
SDI-000S01-LCRX SDI Xtreme 3G Fiber Optic Extender Receiver, Single Mode, LC
SDI-000S01-LCTX SDI Xtreme 3G Fiber Optic Extender Transmitter, Single Mode, LC
SDI FIBER OPTIC EXTENDER OPTICS OPTIONS for SINGLE MODE
VOP-S29 SDI Xtreme 3G Optics Option for Receiver, Single Mode, Single Fiber, LC
VOP-S30 SDI Xtreme 3G Optics Option for Transmitter, Single Mode, Single Fiber, LC
SDI XTREME 3G: MULTI-MODE
Part Number and Description
SDI-000M01-LCRX SDI Xtreme 3G Fiber Optic Extender Receiver, Multi-Mode, LC
SDI-000M01-LCTX SDI Xtreme 3G Fiber Optic Extender Transmitter, Multi-Mode, LC
SDI FIBER OPTIC EXTENDER OPTICS OPTIONS for MULTI-MODE
VOP-M18 SDI Xtreme 3G Optics Option for Receiver, Multi-Mode, Single Fiber, LC
VOP-M19 SDI Xtreme 3G Optics Option for Transmitter, Multi-Mode, Single Fiber, LC
SDI EXTENSION - SDI Xtreme 3G Series
SDI Xtreme 3G - Ordering Information
www.thinklogical.com
� �
SDI EXTENSION - Xtreme 3G Series
The Logical Solution - Dual Serial Digital Interface Extension
SDIXtreme3G+
3G SDI Fiber Optic Extension - Dual Model
The SDI Xtreme 3G+ product series is a compact, broadcast quality, SDI over "ber extension system. The dual system is
designed to transmit up to four SD/HD or two 3G SDI signals with or without embedded audio and data, and is SMPTE
424M, 292M, 259M, 372M and 425 level A and B compliant. In addition, this "ber based transport system gives users the
assurance that each signal is immune to video pathological signals over the entire length of the "ber interconnect, while
supporting all pathological patterns at all rates. The system also supports either single or multi-mode "ber, and is fully
compatible with Thinklogical’s VX and HDX Router line of products.
The SDI Xtreme 3G+ provides industry leading performance and reliable media conversion for a wide variety of applica-
tions. Therefore, it is an ideal solution for Pro A/V, broadcast, and corporate studio applications, including video produc-
tion and editing, sports tele-production, "eld production, cross-town "ber links, cross on–campus production, pre-
"bered venues, courtesy feeds and many more.
SDI EXTENSION - SDI Xtreme 3G+ Series
Extends SDI signals over two "bers - Each "ber
supports two SD/HD signals or one 3G signal -
Providing a total support of up to four SD/HD
or two 3G signals
Transceiver model available for bi-directional
video extension
Multi-standard operation from 270 mbit/s
to 3Gbit/s
Supports 3G/HD/SD SDI inputs with embedded
audio and ancillary data
SMPTE 424M, 292M, 259M, 372M, 425 level
A and B compliant
Uses standard SFP+ optics with LC connectors -
does not require costly SFP+ pathological
modules
RS-422 port for device control - Ideal for remote
camera operations requiring pan, tilt and zoom
functions
Additional options for the transmitter
component include loop-out, or dual channel,
which provides two muliplexed (1.485 Gbps)
signals transmitted and received over a single
"ber
Auto detects input video format and displays
on LEDs
www.thinklogical.com
The System
SDI EXTENSION - SDI Xtreme 3G+ Series
The reliability of the SDI Xtreme 3G+ stems from the quality of its design and construction, with advanced
integrated re-clocking circuitry designed into the transmitter and receiver. Equalized and re-driven SDI loop-through
is also provided on the transmitter. These key features provide assurance that the signal is equalized and re-clocked
prior to "ber transmission; therefore it retains all of the signals initial parameters allowing for pristine re-clocked SDI
outputs on the receiver. The dual chassis model houses two separate SDI Xtreme 3G+ units, providing multiple
combinations of transmitter and receiver possiblities. Status LEDs indicate system activity and link activity.
Installation possibilities are expanded with built-in support for either multi-mode or single mode "ber, making this a
convenient and cost e#ective solution to combat the restrictions involved with the distribution of uncompressed
broadcast quality video signals over long distances. In addition, the standard SFP+ optics are hot
swappable/pluggable with LC connectors. An RS-422 connector provides a full duplex channel to send/receive data,
making it ideal for remote camera operations (such as pan, tilt and zoom), and access to video and audio
players/recorders.
The system provides transmitter and receiver models as well as a transceiver model for bi-directional video
extension.
Typical application extending SDI video using SDI Xtreme 3G+ Dual Model (TX/RX System)
www.thinklogical.com
VIDEO EXTENSION - SeriesSDI EXTENSION - Xtreme 3G SeriesSDI EXTENSION - SDI Xtreme 3G+ Series
Key Features
Typical application extending SDI video using SDI Xtreme 3G+ (Transceiver System)
Multi-standard operation from 270 mbit/s
to 3Gbit/s
Supports 3G/HD/SD SDI inputs with
embedded audio and ancillary dataSignals are recovered and re-clocked on
the receiver
Signal transmission via "ber optic cable;
no RF interference
SMPTE 424M, 292M, 259M, 372M and 425
level A and B compliant
Cable equalization on inputs and cable
drivers on outputs to ensure signal integrity
Low Cost - Hot Swappable/Pluggable
standard SFP+ optics with LC connectors
Distribute uncompressed broadcast quality
signals over single mode "ber up to 40 km.
(24 miles) and up to 1000 meters over
multi-mode "ber
Supports pathological patterns at all rates
Extension of up to four SD/HD signals or
two 3G SDI signal over a single "ber
Compatible with all Thinklogical VX and HDX
Routers
Support for standard 2.97 (3G), 1.485 (HD), 270 (SD),
and fractional /1.001 rates
RS-422 port for device control - Ideal for
remote camera operations requiring pan,
tilt and zoom functions
Additional options for the transmitter component
include loop-out, or dual channel, which provides
two muliplexed (1.485 Gbps) signals transmitted
and received over a single "ber
Equalized and re-clocked SDI loop through
on the transmitter
Transceiver model available for bi-directional
video extensionAuto detects input video format and displays
on LEDs
www.thinklogical.com
Specifications
SDI EXTENSION - Xtreme 3G Series
VIDEO EXTENSION - Series
SDI EXTENSION - Xtreme 3G+ Series
Indicators: (3) Power, Data Rate SD, HD, 3G – Lock Detect - Active
Dimensions: Height: 1.087” (2.76 cm) Depth: 5.487” (13.94 cm) Width: 5.609” (14.25 cm)
Weight: <1lb (0.45kg) each Shipping Weight: 4lb (1.81kg) pair
Power: 5-12 VDC @< 1AMP
Operating Temperature: -5º C to +50º C
TRANSMITTER Speci"cations:
Number of SDI Inputs 1 - 4
Data Rate Range 270Mbps to 2.97 Gbps
Supported Standards SMPTE 424M, 292M, 259M, 372M and 425 level A and B compliant
Re-clocked Data Rates 270 Mbps (SMPTE 259M), 1.485 Gbps (SMPTE 292), 2.97 Gbps (SMPTE 424M)
Equalization Automatic up to 140m of Belden 1694A at 3.0 Gbps, 230m at 1.485 Gbps and 350m at 270 Mbps
Return Loss >10dB up to 2.97 Gbps
SPECIFICATIONS
Number of Loop Outs - 1 Number of Optical Outputs - 2 Rise/Fall Time < 135 ps at 2.97 Gbps per SMPTE 424M;
Signal Level 800mV ± 10% < 270 ps at 1.485 Gbps per SMPTE 292;
DC O#set 0V ± 0.5V 0.4 ns to 1.5 ns at 270 Mbps per SMPTE 259M
Overshoot < 10% of amplitude Re-clocking At 270 Mbps, 1.485 Gbps & 2.97 Gbps
Timing Jitter < 0.2 UI at 270 Mbps; < 1.0 UI at 1.485 Gbps;
< 0.2 UI at 2.97 Gbps with color bar signal
Alignment Jitter < 0.2 UI at 270 Mbps; < 1.0 UI at 1.485 Gbps;
< 0.3 UI at 2.97 Gbps with color bar signal
Optical Output
Connector LC receptacle
Fiber Type Multi-mode Single mode
Wavelength (nominal) 850nm 1310nm
Emmiter Type VCSEL DFB Laser
Output Power (nominal) -4dBm -1.5dBm
Re-clocking At 270 Mbps, 1.485 Gbps & 2.97 Gbps
RECEIVER Speci"cations:
Fiber Input
Connector LC receptacle
Fiber Type Multi-mode Single mode
Wavelength 770 – 860nm 1260 - 1360nm
Minimum Input Sensitivity -12dBm -15dBm
Maximum Input Power 0 dBm 0.5dBm
Number of SDI Outputs 2 - 4 Rise/Fall Time < 135 ps at 2.97 Gbps per SMPTE 424M;
Signal Level 800mV ± 10% < 270 ps at 1.485 Gbps per SMPTE 292;
DC O#set 0V ± 0.5V 0.4 ns to 1.5 ns at 270 Mbps per SMPTE 259M
Overshoot < 10% of amplitude Re-clocking At 270 Mbps, 1.485 Gbps & 2.97 Gbps
Timing Jitter < 0.2 UI at 270 Mbps; < 1.0 UI at 1.485 Gbps;
< 0.2 UI at 2.97 Gbps with color bar signal
Alignment Jitter < 0.2 UI at 270 Mbps; < 1.0 UI at 1.485 Gbps;
< 0.3 UI at 2.97 Gbps with color bar signal
SDI EXTENSION - Xtreme 3G SeriesSDI EXTENSION - SDI Xtreme 3G+ Series
www.thinklogical.com
SDI EXTENSION - SDI Xtreme 3G+ SeriesSDI EXTENSION - SDI Xtreme 3G+ Series
www.thinklogical.com
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ! � � " � � # $ � % & � � ' ( ) ' � �� � © 2010 Thinklogical. All rights reserved.
Thinklogical, claims or other product information
contained in this document are subject to change
without notice. This document may not be reproduced,
in whole or in part, without the express written consent
of Thinklogical.
SDI EXTENSION - SDI Xtreme 3G+ Series
www.thinklogical.com
� �
SDI EXTENSION - Xtreme 3G Series
The Logical Solution - Rack Mount - Serial Digital Interface Extension
SDIXtreme3G+ RM
3G SDI Fiber Optic Extension - Rack Mount Model
The SDI Xtreme 3G+ product series is a compact, broadcast quality, SDI over �ber extension system. The rack mount
system is a 1U chassis which houses four separate SDI modules, each of which supports two SD/HD signals or one 3G signal
(as well as dual-link SDI). This enables users to transmit up to eight SD/HD or four 3G SDI signals with or without embedded
audio and data. Depending on the infrastructure, the SDI Xtreme 3G+ can distribute uncompressed broadcast quality
signals over single mode �ber up to 40 km. (24 miles) and up to 1000 meters over multi-mode �ber. In addition, this �ber
based transport system gives users the assurance that each signal is immune to video pathological signals over the entire
length of the �ber interconnect, while supporting all pathological patterns at all rates.
The SDI Xtreme 3G+ is a total system solution providing industry leading performance and full compatibility with
Thinklogical’s VX and HDX Router line of products. Providing reliable media conversion for a wide variety of applications it
is an ideal solution for Pro A/V, broadcast, and corporate studio applications, including video production and editing,
sports tele-production, �eld production, cross-town �ber links, cross on–campus production, pre–�bered venues, courtesy
feeds and many more.
SDI EXTENSION - SDI Xtreme 3G+ Series
SMPTE 424M, 292M, 259M, 372M, 425 level
A and B compliant
Four SDI components combined in one rack
mount unit
Each module provides RS-422 port for device
control - Ideal for remote camera operations
requiring pan, tilt and zoom functions
Rack unit is comprised of four modules. Any
combination of transmitter/receiver is
possible.
Each module extends SDI signals over a single
�ber - Supporting two SD/HD signals or one
3G signal - Providing a total support of up to
eight SD/HD or four 3G signals (as well as
dual-link SDI)
Features hot-swappable, current sharing
power supply modules
Provides front panel status monitoring
Auto detects input video format and displays
on LEDs
www.thinklogical.com
The System
SDI EXTENSION - SDI Xtreme 3G+ Series
The SDI Xtreme 3G+ RM has a versatile component design which allows the unit to be used in a variety of applica-
tion designs, as either a transmitter, receiver, or the slots may be mixed for �exible con�gurations (as a transceiver).
This makes it an ideal rack mount solution for the extension of SDI signals to multiple locations. All SDI interface
modules are hot-swappable, and each has its own RS-422 port for remote camera operations (such as pan, tilt and
zoom), and access to video and audio players/recorders.
The reliability of the SDI Xtreme 3G+ stems from the quality of its design and construction, with advanced
integrated re-clocking circuitry designed into the components. Equalized and re-driven SDI loop-through is also
provided on the transmitter. These key features provide assurance that the signal is equalized and re-clocked prior to
�ber transmission; therefore it retains all of the signals initial parameters allowing for pristine re-clocked SDI outputs
on the receiver. Additional options for the transmitter component include loop-out, or dual channel, which provides
two multiplexed (1.485 Gbps) signals transmitted and received over a single �ber.
Front panel user interface provides high availability with all of the essential features, such as status monitoring and link
activity, for mission critical environments. System architecture provides hot-swappable, current sharing power supply
modules, a critical component in high up-time environments which typically are supported by more than one power
grid as a failover option. In the unlikely event that a power module fails, there is no interruption to the component
because they are both working all the time. In addition, a dry contact annunciator provides an alarm warning in the
event of a power failure or a unit overheating and a replacement may be installed with minimal downtime.
Installation possibilities are expanded with built-in support for either multi-mode or single mode �ber, making this a
convenient and cost e�ective solution to combat the restrictions involved with the distribution of uncompressed
broadcast quality video signals over long distances. In addition, the standard SFP+ optics (with LC connectors) are
hot swappable/pluggable.
Back View of SDI Xtreme 3G+ Rack Mount Unit - All modules are hot-swappable
www.thinklogical.com
VIDEO EXTENSION - SeriesSDI EXTENSION - Xtreme 3G SeriesSDI EXTENSION - SDI Xtreme 3G+ Series
Key Features
Dimensions: Rack Size: EIA 19" Height: 1U-1.72” (4.40 cm) Depth: 18.02" (45.8 cm) Width: 17.49" (44.5 cm)
(Tolerance: ± .039"; .100cm)
Weight: 15 lbs (4.99 kg) per unit Shipping Weight: 30 lbs (12.25 kg) pair
Power Consumption 50 watts per unit
Supply Voltage 100-240 VAC, 47-63 Hz, Universal AC Power Supplies
Operating Temperature: 0°-50°C; (32°-122°F)
SPECIFICATIONS
Multi-standard operation from 270 mbit/s
to 3Gbit/s
Supports 3G/HD/SD SDI inputs with
embedded audio and ancillary data
Signals are recovered and re-clocked on
the receiver
Equalized and re-clocked SDI loop through
on the transmitter
Signal transmission via !ber optic cable;
no RF interference
Distribute uncompressed broadcast quality
signals over single mode !ber up to 40 km.
(24 miles) and up to 1000 meters over
multi-mode !ber
Compatible with all Thinklogical VX and
HDX Routers
Support for standard 2.97 (3G) , 1.485 (HD), 270
(SD), and fractional 1/1.001 rates
SMPTE 424M, 292M, 259M, 372M, 425 level
A and B compliant
Four SDI components combined in one rack
mount unit - Any combination of
transmitter/receiver is possible.
RS-422 port for device control - Ideal for
remote camera operations requiring pan, tilt
and zoom functions
Extends SDI signals over a single !ber - Each
!ber supports two SD/HD signals or one 3G
signal - Providing a total support of up to
eight SD/HD or four 3G signals (as well as
dual-link SDI)
Features hot-swappable, current sharing
power supply modules
Cable equalization on inputs and cable drivers
on outputs to ensure signal integrity
Supports pathological patterns at all rates
Provides front panel status monitoring
Auto detects input video format and displays
on LEDs
www.thinklogical.com
Specifications
SDI EXTENSION - Xtreme 3G Series
VIDEO EXTENSION - Series
SDI EXTENSION - Xtreme 3G+ Series
Optical Output
Connector LC receptacle
Fiber Type Multi-mode Single Mode
Wavelength (nominal) 850nm 1310nm
Emmiter Type VCSEL DFB Laser
Output Power (nominal) -4dBm -1.5dBm
Re-clocking At 270 Mbps, 1.485 Gbps & 2.97 Gbps
RECEIVER Speci!cations (individual interface component):
Fiber Input
Connector LC receptacle
Fiber Type Multi-mode Single Mode
Wavelength 770 – 860nm 1260 - 1360nm
Minimum Input Sensitivity -12dBm -15dBm
Maximum Input Power 0 dBm 0.5dBm
Number of SDI Outputs 2 - 4 Rise/Fall Time < 135 ps at 2.97 Gbps per SMPTE 424M;
Signal Level 800mV ± 10% < 270 ps at 1.485 Gbps per SMPTE 292;
DC O"set 0V ± 0.5V 0.4 ns to 1.5 ns at 270 Mbps per SMPTE 259M
Overshoot < 10% of amplitude Re-clocking At 270 Mbps, 1.485 Gbps & 2.97 Gbps
Timing Jitter < 0.2 UI at 270 Mbps; < 1.0 UI at 1.485 Gbps;
< 0.2 UI at 2.97 Gbps with color bar signal
Alignment Jitter < 0.2 UI at 270 Mbps; < 1.0 UI at 1.485 Gbps;
< 0.3 UI at 2.97 Gbps with color bar signal
TRANSMITTER Speci!cations (individual interface component):
Number of SDI Inputs 1 - 2
Data Rate Range 270Mbps to 2.97 Gbps
Supported Standards SMPTE 424M, 292M, 259M, 372M and 425 level A and B compliant
Re-clocked Data Rates 270 Mbps (SMPTE 259M), 1.485 Gbps (SMPTE 292), 2.97 Gbps (SMPTE 424M)
Equalization Automatic up to 140m of Belden 1694A at 3.0 Gbps, 230m at 1.485 Gbps and 350m at 270 Mbps
Return Loss >10dB up to 2.97 Gbps
Number of Loop Outs - 1 Number of Optical Outputs - 2 Rise/Fall Time < 135 ps at 2.97 Gbps per SMPTE 424M;
Signal Level 800mV ± 10% < 270 ps at 1.485 Gbps per SMPTE 292;
DC O"set 0V ± 0.5V 0.4 ns to 1.5 ns at 270 Mbps per SMPTE 259M
Overshoot < 10% of amplitude Re-clocking At 270 Mbps, 1.485 Gbps & 2.97 Gbps
Timing Jitter < 0.2 UI at 270 Mbps; < 1.0 UI at 1.485 Gbps;
< 0.2 UI at 2.97 Gbps with color bar signal
Alignment Jitter < 0.2 UI at 270 Mbps; < 1.0 UI at 1.485 Gbps;
< 0.3 UI at 2.97 Gbps with color bar signal
SDI EXTENSION - Xtreme 3G SeriesSDI EXTENSION - SDI Xtreme 3G+ Series
Typical application extending SDI video using SDI Xtreme 3G+ RM
www.thinklogical.com
SDI EXTENSION - SDI Xtreme 3G+ Series
SDI Xtreme 3G+ RM - Rack Mount Ordering Information
SDI EXTENSION - SDI Xtreme 3G+ Series
SDI-0000X1
SDI Xtreme 3G Plus Rack Mount Chassis
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ! � � " � � # $ � % & � � ' ( ) ' � �* + © 2010 Thinklogical. All rights reserved.
Thinklogical, claims or other product information
contained in this document are subject to change
without notice. This document may not be reproduced,
in whole or in part, without the express written consent
of Thinklogical.
www.thinklogical.com
� �
SDI EXTENSION - Xtreme 3G Series
The Logical Solution - Serial Digital Interface Extension
SDIXtreme3G+
3G SDI Fiber Optic Extension
The SDI Xtreme 3G+ product series is a compact, broadcast quality, SDI over "ber extension system. The system is
designed to transmit up to two SD/HD signals or one 3G SDI signal with or without embedded audio and data, and is
SMPTE 424M, 292M, 259M, 372M and 425 level A and B compliant. In addition, this "ber based transport system gives
users the assurance that each signal is immune to video pathological signals over the entire length of the "ber
interconnect, while supporting all pathological patterns at all rates. The system also supports either single or multi-
mode "ber, and is fully compatible with Thinklogical’s VX and HDX Router line of products.
The SDI Xtreme 3G+ provides industry leading performance and reliable media conversion for a wide variety of
applications. Therefore, it is an ideal solution for Pro A/V, broadcast, and corporate studio applications, including video
production and editing, sports tele-production, "eld production, cross-town "ber links, cross on–campus production,
pre–"bered venues, courtesy feeds and many more.
SDI EXTENSION - SDI Xtreme 3G+ Series
Multi-standard operation from 270 mbit/s
to 3Gbit/s
Supports 3G/HD/SD SDI inputs with embedded
audio and ancillary data
SMPTE 424M, 292M, 259M, 372M, 425 level
A and B compliant
Extends SDI signals over "ber - A single "ber
supports two SD/HD signals or one 3G signal
Uses standard SFP+ optics with LC connectors -
does not require costly SFP+ pathological
modules
RS-422 port for device control - Ideal for remote
camera operations requiring pan, tilt and zoom
functions
Additional options for the transmitter
component include loop-out, or dual channel,
which provides two multiplexed (1.485 Gbps)
signals transmitted and received over a single
"ber
Auto detects input video format and displays
on LEDs
The System
SDI EXTENSION - SDI Xtreme 3G+ Series
The reliability of the SDI Xtreme 3G+ stems from the quality of its design and construction, with advanced
integrated re-clocking circuitry designed into the transmitter and receiver. Equalized and re-driven SDI loop-through
is also provided on the transmitter. These key features provide assurance that the signal is equalized and re-clocked
prior to "ber transmission; therefore it retains all of the signals initial parameters allowing for pristine re-clocked SDI
outputs on the receiver. Additional options for the transmitter component include loop-out, or dual channel, which
provides two multiplexed (1.485 Gbps) signals transmitted and received over a single "ber. Status LEDs indicate
system activity and link activity.
Installation possibilities are expanded with built-in support for either multi-mode or single mode "ber, making this a
convenient and cost e#ective solution to combat the restrictions involved with the distribution of uncompressed
broadcast quality video signals over long distances. In addition, the standard SFP+ optics are hot
swappable/pluggable with LC connectors. An RS-422 connector provides a full duplex channel to send/receive data,
making it ideal for remote camera operations (such as pan, tilt and zoom), and access to video and audio
players/recorders.
Typical application extending SDI video using SDI Xtreme 3G+ - with Loop Out Option - TX/RX System
The system provides transmitter and receiver models as well as a transceiver model for bi-directional video
extension.
www.thinklogical.com
www.thinklogical.com
VIDEO EXTENSION - SeriesSDI EXTENSION - Xtreme 3G SeriesSDI EXTENSION - SDI Xtreme 3G+ Series
Multi-standard operation from 270 mbit/s
to 3Gbit/s
Supports 3G/HD/SD SDI inputs with
embedded audio and ancillary dataSignals are recovered and re-clocked on
the receiver
Signal transmission via "ber optic cable;
no RF interference
SMPTE 424M, 292M, 259M, 372M and 425
level A and B compliant
Cable equalization on inputs and cable
drivers on outputs to ensure signal integrity
Low Cost - Hot Swappable/Pluggable
standard SFP+ optics with LC connectors
Distribute uncompressed broadcast quality
signals over single mode "ber up to 40 km.
(24 miles) and up to 1000 meters over
multi-mode "ber
Key Features
Supports pathological patterns at all rates
Extension of up to two SD/HD signals or
one 3G SDI signal over a single "ber
Compatible with all Thinklogical VX and HDX
Routers
Support for standard 2.97 (3G), 1.485 (HD),
270 (SD), and fractional 1/1.001 rates
RS-422 port for device control - Ideal for
remote camera operations requiring pan,
tilt and zoom functions
Additional options for the transmitter component
include loop-out, or dual channel, which provides
two muliplexed (1.485 Gbps) signals transmitted
and received over a single "ber
Equalized and re-clocked SDI loop through
on the transmitter
Transceiver model available for bi-directional
video extensionAuto detects input video format and displays
on LEDs
Typical application extending SDI video using SDI Xtreme 3G+ - with Two Input/Multiplexed Option - TX/RX System
* 2nd "ber utilized for RS422
camera control
*
www.thinklogical.com
Specifications
SDI EXTENSION - Xtreme 3G Series
VIDEO EXTENSION - Series
SDI EXTENSION - Xtreme 3G+ Series
Optical Output
Connector LC receptacle
Fiber Type Multi-mode Single Mode
Wavelength (nominal) 850nm 1310nm
Emmiter Type VCSEL DFB Laser
Output Power (nominal) -4dBm -1.5dBm
Re-clocking At 270 Mbps, 1.485 Gbps & 2.97 Gbps
RECEIVER Speci"cations:
Fiber Input
Connector LC receptacle
Fiber Type Multi-mode Single Mode
Wavelength 770 – 860nm 1260 - 1360nm
Minimum Input Sensitivity -12dBm -15dBm
Maximum Input Power 0 dBm 0.5dBm
Number of SDI Outputs 1 - 2 Rise/Fall Time < 135 ps at 2.97 Gbps per SMPTE 424M;
Signal Level 800mV ± 10% < 270 ps at 1.485 Gbps per SMPTE 292;
DC O#set 0V ± 0.5V 0.4 ns to 1.5 ns at 270 Mbps per SMPTE 259M
Overshoot < 10% of amplitude Re-clocking At 270 Mbps, 1.485 Gbps & 2.97 Gbps
Timing Jitter < 0.2 UI at 270 Mbps; < 1.0 UI at 1.485 Gbps;
< 0.2 UI at 2.97 Gbps with color bar signal
Alignment Jitter < 0.2 UI at 270 Mbps; < 1.0 UI at 1.485 Gbps;
< 0.3 UI at 2.97 Gbps with color bar signal
Indicators: (3) Power, Data Rate SD, HD, 3G – Lock Detect - Active
Dimensions: Height: 1.68” (4.3cm) Depth: 3.427” (8.7cm) Width: 5.609” (14.25 cm)
Weight: <1lb (0.45kg) each Shipping Weight: 4lb (1.81kg) pair
Power: 5-12 VDC @< 1AMP
Operating Temperature: -5º C to +50º C
TRANSMITTER Speci"cations:
Number of SDI Inputs 1 - 2
Data Rate Range 270Mbps to 2.97 Gbps
Supported Standards SMPTE 424M, 292M, 259M, 372M and 425 level A and B compliant
Re-clocked Data Rates 270 Mbps (SMPTE 259M), 1.485 Gbps (SMPTE 292), 2.97 Gbps (SMPTE 424M)
Equalization Automatic up to 140m of Belden 1694A at 3.0 Gbps, 230m at 1.485 Gbps and 350m at 270 Mbps
Return Loss >10dB up to 2.97 Gbps
SPECIFICATIONS
Number of Loop Outs - 1 Number of Optical Outputs - 2 Rise/Fall Time < 135 ps at 2.97 Gbps per SMPTE 424M;
Signal Level 800mV ± 10% < 270 ps at 1.485 Gbps per SMPTE 292;
DC O#set 0V ± 0.5V 0.4 ns to 1.5 ns at 270 Mbps per SMPTE 259M
Overshoot < 10% of amplitude Re-clocking At 270 Mbps, 1.485 Gbps & 2.97 Gbps
Timing Jitter < 0.2 UI at 270 Mbps; < 1.0 UI at 1.485 Gbps;
< 0.2 UI at 2.97 Gbps with color bar signal
Alignment Jitter < 0.2 UI at 270 Mbps; < 1.0 UI at 1.485 Gbps;
< 0.3 UI at 2.97 Gbps with color bar signal
SDI EXTENSION - Xtreme 3G SeriesSDI EXTENSION - SDI Xtreme 3G+ Series
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ! � � " � � # $ � % & � � ' ( ) ' � �� � © 2010 Thinklogical. All rights reserved.
Thinklogical, claims or other product information
contained in this document are subject to change
without notice. This document may not be reproduced,
in whole or in part, without the express written consent
of Thinklogical.
MODULAR 4K EXTENSION - SDI Xtreme6G+
SDI Xtreme6G+ Modules - Transmitter and Receiver
Fiber Optic Video Extension Supporting SMPTE 4K Standards
The SDI Xtreme6G+ extends 4K signals from four SD/HD-SDI inputs or two 3G-SDI inputs over a
single fiber, with no compression, latency, artifacts or lost frames. The SDI Xtreme6G+ is ideally suited
for entertainment, medical, events and staging applications requiring high resolution 4K video, such
as 4K filming, projection and camera connectivity, video editing, video analysis and simulation.
Low fiber footprint – cost saving and easy to integrate
- Extend four SD/HD-SDI signals or two 3G-SDI over a single fiber
Modules are space saving and flexible
- Small form factor – each module is ¼RU
- Modules and optics are hot-swappable
High performance
- Industry leading bandwidth - 6.25Gbps
- Synchronized signals
- No data loss
- No compression
RS-422 for control
Full family of compatible 6.25Gbps routers
- VX Routers, scalable from 5 to 640 ports
- MX Router, compact 3RU chassis, scalable from 16 to 48 ports
Product Features
Extend Four SD/HD-SDI Inputs or Two 3G-SDI Inputs
www.thinklogical.com
For more information contact a Thinklogical Sales Representative at [email protected] or (203) 647-8700
or visit www.thinklogical.com
KVM EXTENSION - Velocity SeriesMODULAR KVM EXTENSION - Velocitykvm T- Series 4200
Ordering Information:
SDM-M104X6-LCTX – SDI Xtreme6G+ Transmitter, Four SD/HD-SDI or Two 3G-SDI Inputs, 6.25Gbps, RS-422, LC
SDM-M104X6-LCRX – SDI Xtreme6G+ Receiver, Four SD/HD-SDI or Two 3G-SDI Outputs, 6.25Gbps, RS-422, LC
One optics package required per module.
VOP-M19 - Multi-mode Optics Package for SDI Xtreme6G+, Transmitter and Receiver, 1000 meters
Each module requires chassis support. Chassis sold separately.
VQS-001300 – Q-Series 1300 Chassis, Supports a single module per chassis
VQS-002300 – Q-Series 2300 Chassis, Supports up to two modules per chassis
VQS-004300 – Q-Series 4300 Chassis, Supports up to four modules per chassis, Redundant power supplies
VTS-Q04200 – T-Series Q-4200 Chassis, Supports up to two modules per chassis, plus an additional KVM T-Series module,
Redundant power supplies
MODULAR 4K EXTENSION - SDI Xtreme6G+
© 2013 Thinklogical. All rights reserved.
Thinklogical, claims or other product information contained in this document are subject to change without notice.
This document may not be reproduced, in whole or in part, without the express written consent of Thinklogical.
Specifications
Optical Fiber Output
Connector: LC
Fiber Type: Multi-Mode Single Mode
Wavelength (nominal): 850nm 1310nm
Emmiter Type: VCSEL DFB Laser
Output Power (nominal): -4dBm -1.5dBm
Number of SDI Outputs: 2 when used as two 3G-SDI outputs
4 when used as four SD/HD-SDI outputs
Signal Level: 800mV ± 10%
DC O!set: 0V ± 0.5V
Overshoot: < 10% of amplitude
Timing Jitter: < 0.2 UI at 270 Mbps; < 1.0 UI at 1.485 Gbps;
< 0.2 UI at 2.97 Gbps with color bar signal
Alignment Jitter: < 0.2 UI at 270 Mbps; < 1.0 UI at 1.485 Gbps;
< 0.3 UI at 2.97 Gbps with color bar signal
Optical Fiber Input
Connector: LC
Fiber Type: Multi-Mode Single Mode
Wavelength: 770 – 860nm 1260 - 1360nm
Minimum Input Sensitivity: -12dBm -15dBm
Maximum Input Power: 0 dBm 0.5dBm
Number of SDI Inputs: 2 when used as two 3G-SDI inputs
4 when used as four SD/HD-SDI inputs
Data Rate Range: 270Mbps to 2.97 Gbps
Supported Standards: SMPTE 424M, 292M, 259M,
372M and 425 level A and B compliant
Re-clocked Data Rates: 270 Mbps (SMPTE 259M), 1.485 Gbps (SMPTE 292),
2.97 Gbps (SMPTE 424M)
Equalization: Automatic up to 140m of Belden 1694A at 3.0 Gbps,
230m at 1.485 Gbps and 350m at 270 Mbps
Return Loss: >10dB up to 2.97 Gbps
Number of Loop Outs: 2 when used as two 3G-SDI inputs
0 when used as four SD/HD-SDI inputs
Number of Optical Outputs: 1
Signal Level: 800mV ± 10%
DC O!set: 0V ± 0.5V
Overshoot: < 10% of amplitude
Timing Jitter: < 0.2 UI at 270 Mbps; < 1.0 UI at 1.485 Gbps;
< 0.2 UI at 2.97 Gbps with color bar signal
Alignment Jitter: < 0.2 UI at 270 Mbps; < 1.0 UI at 1.485 Gbps;
< 0.3 UI at 2.97 Gbps with color bar signal
Rise/Fall Time: < 135 ps at 2.97 Gbps per SMPTE 424M;
< 270 ps at 1.485 Gbps per SMPTE 292;
0.4 ns to 1.5 ns at 270 Mbps per SMPTE 259M
Re-clocking: At 270 Mbps, 1.485 Gbps & 2.97 Gbps
TRANSMITTER Speci!cations (Individual Interface Component):
Rise/Fall Time: < 135 ps at 2.97 Gbps per SMPTE 424M;
< 270 ps at 1.485 Gbps per SMPTE 292;
0.4 ns to 1.5 ns at 270 Mbps per SMPTE 259M
Re-clocking: At 270 Mbps, 1.485 Gbps & 2.97 Gbps
RECEIVER Speci!cations (Individual Interface Component):
Operating Temp.: 0°-50°C; (32°-122°F)
Humidity: 5-95% RH, non-condensing
Dimensions: Height: 1.592” (40.43 mm)
Depth: 6.366" (161.69 mm)
Width: 3.693” (93.80 mm)
(tolerance: ± .039"; .1000 mm)
Weight: 1.5 lbs (0.68 kg) per unit
Shipping Weight: 9 lbs (4.08 kg)
Power Consumption: 10 watts per plug-in module
Optical Cable: Single-mode and multi-mode over one or two $bers, second $ber required for RS-422
Fiber is available, not supplied
Optical Distance: Up to 50 meters using 62.5/125um, type OM1; Up to 350 meters using 50/125um, type OM2
Up to 750 meters using 50/125um, type OM3; Up to 1000 meters using 50/125um, type OM4;
Up to 40 kilometers using 9/125um, type OS2 (single-mode)
Compliance: Approvals for US, Canada and European Union
Warranty: 12 months from date of shipment - Extended warranties available
Q-Series SDI Xtreme 3G+ Module (transmitter shown)
www.thinklogical.com
� �
MODULAR VIDEO EXTENSION - Q-Series SDI Xtreme 3G+ Module
The SDI Xtreme 3G+ is an interface option designed for use in the Q-Series 4300 modular
chassis (Q-4300 sold separately). This module enables users to transmit up to two SD/HD signals
or one 3G SDI signal with or without embedded audio and data, and is SMPTE 424M, 292M,
259M, 372M and 425 level A and B compliant. Using multi-mode or single-mode fiber, it allows
users to locate a SDI monitor from just a few meters up to 40 kilometers (24 miles) away from
the controlling computer securely and without the loss of resolution. In addition, this !ber
based transport system gives users the assurance that each signal is immune to video
pathological signals over the entire length of the !ber interconnect, while supporting all
pathological patterns at all rates.
The SDI Xtreme 3G+ module provides industry leading performance and reliable media
conversion for a wide variety of applications. Therefore, it is an ideal solution for commerical
A/V, broadcast, and corporate studio applications, including video production and editing,
sports tele-production, !eld production, cross-town !ber links, cross on–campus production,
pre–!bered venues, courtesy feeds and many more.
SDI Xtreme 3G+ Module
Supporting two SD/HD
signals or one 3G signal
RS-422 port for device control
Fiber Options Include:
Single-Mode
Multi-Mode
Extend SDI and RS-422 signals up to 40 Kilometers
SDIXtreme 3G+
www.thinklogical.com
KVM EXTENSION - Velocity SeriesMODULAR KVM EXTENSION - Velocitykvm T- Series 4200
Module Features
The reliability of the SDI Xtreme 3G+ module stems from the quality of its design and construction, with advanced
integrated re-clocking circuitry designed into the transmitter and receiver. Equalized and re-driven SDI loop-through
is also provided on the transmitter. These key features provide assurance that the signal is equalized and re-clocked
prior to �ber transmission; therefore it retains all of the signals initial parameters allowing for pristine re-clocked SDI
outputs on the receiver.
Installation possibilities are expanded with built-in support for either multi-mode or single mode �ber, making this a
convenient and cost e�ective solution to combat the restrictions involved with the distribution of uncompressed
broadcast quality video signals over long distances. In addition, the standard SFP+ optics are hot
swappable/pluggable with LC connectors. An RS-422 connector provides a full duplex channel to send/receive data,
making it ideal for remote camera operations (such as pan, tilt and zoom), and access to video and audio
players/recorders.
MODULAR VIDEO EXTENSION - Q-Series SDI Xtreme 3G+ Module
Multi-standard operation from 270 mbit/s
to 3Gbit/s
Supports 3G/HD/SD SDI inputs with
embedded audio and ancillary data
Signals are recovered and re-clocked on
the receiver
Equalized and re-clocked SDI loop through
on the transmitter
Signal transmission via �ber optic cable;
no RF interference
Distribute uncompressed broadcast quality
signals over single mode �ber up to 40 km.
(24 miles) and up to 1000 meters over
multi-mode �ber
Compatible with all Thinklogical SDI Xtreme 3G+
(stand alone) extenders, VX and HDX Routers
Support for standard 2.97 (3G) , 1.485 (HD), 270
(SD), and fractional 1/1.001 rates
SMPTE 424M, 292M, 259M, 372M, 425 level
A and B compliant
RS-422 port for device control - Ideal for
remote camera operations requiring pan, tilt
and zoom functions
Extends SDI signals over a single �ber -
Each �ber supports two SD/HD signals or one
3G signal
SMPTE compliant cable equalization on inputs
and cable drivers on outputs to ensure signal
integrity
Supports pathological patterns at all rates
Auto detects input video format and displays
on LEDs
Designed for use in the Q-4300 chassis
(sold separately)
Single-mode or multi-mode fiber options extend
signals up to:
- 350 meters using multi-mode fiber type OM2
- 750 meters using multi-mode fiber type OM3
- 1000 meters using multi-mode fiber type OM4
- 40 kilometers (24 miles) using single-mode fiber
www.thinklogical.com
VIDEO EXTENSION - Series
The Modular DVI, SDI, Audio, Serial, and Network Extension System – Ideal Rack Space Saving Solution
The Q-4300 chassis has a versatile modular design which is equipped with quad, hot-swappable interface modules. This
flexible design of the chassis makes it an ideal solution for a variety of applications, serving as a transmitter, receiver, or
even a transceiver.
Q-4300 chassis module options include (all modules sold separately):
Velocitydvi Module 3: One single-link DVI display
Velocitydvi Module 3 A/V+: One single-link DVI display, full duplex stereo audio, serial (RS-232)
Velocitydvi Module 3 A/N+: One single-link DVI display, full duplex stereo audio, network
Velocitydvi Module 6: One dual-link DVI display
Velocitydvi Module 6 A/V+: One dual-link DVI display, full duplex stereo audio, serial (RS-232)
Velocitydvi Module 6 A/N+: One dual-link DVI display, full duplex stereo audio, network
SDI Xtreme 3G+ Module: Two SD/HD signals or one 3G signal, serial (RS-422)
Application Description: Four functional SDI sources each connected to the Q-4300 chassis equipped with four SDI
Xtreme 3G+ transmitter interface module components, which extends SDI video and RS-422 signals to one Q-4300 receiver
chassis equipped with with four SDI Xtreme 3G+ receiver interface module components. Signals are routed through the
Thinklogical HDX576 router.
Q-4300 Chassis Equipped with Four SDI Xteme 3G+ Interfaces
System Application Example
MODULAR VIDEO EXTENSION - Q-Series SDI Xtreme 3G+ Module
www.thinklogical.com
VIDEO EXTENSION - Series
Optical Output
Connector LC receptacle
Fiber Type Multi-mode Single-mode
Wavelength (nominal) 850nm 1310nm
Emmiter Type VCSEL DFB Laser
Output Power (nominal) -4dBm -1.5dBm
Re-clocking At 270 Mbps, 1.485 Gbps & 2.97 Gbps
RECEIVER Speci!cations (individual interface component):
Fiber Input
Connector LC receptacle
Fiber Type Multi-mode Single-mode
Wavelength 770 – 860nm 1260 - 1360nm
Minimum Input Sensitivity -12dBm -15dBm
Maximum Input Power 0 dBm 0.5dBm
Number of SDI Outputs 2 - 4 Rise/Fall Time < 135 ps at 2.97 Gbps per SMPTE 424M;
Signal Level 800mV ± 10% < 270 ps at 1.485 Gbps per SMPTE 292;
DC O"set 0V ± 0.5V 0.4 ns to 1.5 ns at 270 Mbps per SMPTE 259M
Overshoot < 10% of amplitude Re-clocking At 270 Mbps, 1.485 Gbps & 2.97 Gbps
Timing Jitter < 0.2 UI at 270 Mbps; < 1.0 UI at 1.485 Gbps;
< 0.2 UI at 2.97 Gbps with color bar signal
Alignment Jitter < 0.2 UI at 270 Mbps; < 1.0 UI at 1.485 Gbps;
< 0.3 UI at 2.97 Gbps with color bar signal
TRANSMITTER Speci!cations (individual interface component):
Number of SDI Inputs 1 - 2
Data Rate Range 270Mbps to 2.97 Gbps
Supported Standards SMPTE 424M, 292M, 259M, 372M and 425 level A and B compliant
Re-clocked Data Rates 270 Mbps (SMPTE 259M), 1.485 Gbps (SMPTE 292), 2.97 Gbps (SMPTE 424M)
Equalization Automatic up to 140m of Belden 1694A at 3.0 Gbps, 230m at 1.485 Gbps and 350m at 270 Mbps
Return Loss >10dB up to 2.97 Gbps
Number of Loop Outs - 1 Number of Optical Outputs - 2 Rise/Fall Time < 135 ps at 2.97 Gbps per SMPTE 424M;
Signal Level 800mV ± 10% < 270 ps at 1.485 Gbps per SMPTE 292;
DC O"set 0V ± 0.5V 0.4 ns to 1.5 ns at 270 Mbps per SMPTE 259M
Overshoot < 10% of amplitude Re-clocking At 270 Mbps, 1.485 Gbps & 2.97 Gbps
Timing Jitter < 0.2 UI at 270 Mbps; < 1.0 UI at 1.485 Gbps;
< 0.2 UI at 2.97 Gbps with color bar signal
Alignment Jitter < 0.2 UI at 270 Mbps; < 1.0 UI at 1.485 Gbps;
< 0.3 UI at 2.97 Gbps with color bar signal
MODULAR VIDEO EXTENSION - Q-Series SDI Xtreme 3G+ Module
MODULAR KVM EXTENSION - Velocity Series
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ! � � " � � # $ � % & � � ' ( ) ' � �* +
MODULAR KVM EXTENSION - Velocitykvm T- Series
SDI Xtreme 3G+ Module Ordering Information
© 2011 Thinklogical. All rights reserved.
Thinklogical, claims or other product information
contained in this document are subject to change
without notice. This document may not be reproduced,
in whole or in part, without the express written consent
of Thinklogical.
MODULAR VIDEO EXTENSION - Q-Series SDI Xtreme 3G+ Module