Catalogues Motefcurs électriques

7/30/2019 Catalogues Motefcurs lectriques

1/68
http://www.parvalux.com/


2/68

If there is one de nable difference in

Parvalux, it is our people. Our abilityto develop, produce and marketinnovative geared motor solutions istotally dependant on our team.Recent months have seen a signi cantrecruitment drive to hire world-classengineers, marketers and designers tohelp build the future Parvalux.These newcomers bring not only awealth of experience from within ourindustry; they have immediately raisedour ability to innovate and improvealmost every aspect of business.

This has already delivered a quantumleap in our performance in 2008 andwill continue to do so over the nextdecade.

our team

There are an increasing number of Original EquipmentManufacturers (OEMs) who need a bespoke geared

motor solution.It is for this reason that Parvalux have invested heavilyin the technology and the people required to designand develop products that meet the demands of theindividual customer.By utilising 3D-modelling and Finite Element Analysis(FEA) we are able to produce prototypes at our UKfacility quickly and ef ciently.Our lean manufacturing capability then enables us torapidly convert the prototype into a cost-effectivesolution that ful ls budget and performance needsperfectly.Our aim is to ensure that we serve the widest possiblerange of applications within the low-powered gearedmotor market.Our extensive range enables customers to choosefrom an almost in nite number of gear combinationsto meet the output speed and torque requirements oftheir desired application.Our key strength is our ability to customise ourproducts with a whole host of extras; such as custombuilt anges and shafts, tailored windings, mechanicalcams and switches as well as customised wiring andconnections.We provide single, double or hollow shaft as standard.In addition, we can provide custom mounting kits tointerface the Parvalux gearbox with your existingmounting.To ensure the overall cost remains competitivewe apply lean manufacturing techniques at ourproduction facilities and manage a quality-drivenglobal supply chain.

our facility

IS r i i . 7

Our motor technologies span from AC inductionthrough to DC brushless and our gearbox know-how

covers practically all types from spur/helicalthrough to worm and planetary.

Motor types:AC inductionAC/DC seriesDC shuntDC permanent magnetDC brushless

Over the years technological innovations andcontemporary manufacturing methodologies, suchas lean enterprise and six sigma, have changed theway we produce our products; but at the heart of ourbusiness we have preserved a solid ethos to providehigh quality, reliable products at globally competitiveprices.

Our reliability is founded upon sixty years of success.Today, with an installed base of over ve million,customers all over the world rely on Parvaluxproducts to keep their products and their businessesperforming.

We have also built an enviable reputation for providingbespoke designed geared motors that meet ourcustomers exacting needs. Our capacity to providecustomised units in small or vast quantities, at globallycompetitive prices is, we believe, unmatched.

We continue to grow by focusing on the values thatmean the same today as they did sixty years ago:choice, reliability, customisation.

Gearbox types:Worm and wheelDouble-reductionMulti-spurIn-line multi-spurPlanetary

our technology


3/68

Motor data

PBL42 4 PBL42IE 6 PBL60 8 PBL60IE 10 PBL86 12Controller data S controller 14 N and B controllers 1 0B controller 17Customisation options 18Selection guide 1Geared motors worm gearboxes 20 in-line worm gearboxes 3 worm spur gearboxes 46Flange options 7Spring applied brakes Encoder 60Shaft and worm gearbox positions 61Gearbox information 62Mechanical data 63Gearbox thermal rating limits 64EMC Directive compliance 6

CE directive 66IP protection 67Contacts 68

contents

geared motors legendary reliability totally customisable

E&OE (errors and omissions excepted); in line with our policy ofcontinuous improvement all data is subject to change.All drawings and product representations enclosed herein are not to scale.

engineeringreliability intoevery productfor over sixty

years

Founded in 1 47, asone of the UKs rst

manufacturers of smallgeared motors, Parvaluxhas built a tremendousreputation for offeringone of the worlds mostextensive and reliable

ranges of customisable ACand DC geared motor units.Today, Parvalux continues

to be a successful,privately-owned andrun British business

with distributors in 22countries.


4/68

4

Pin DescriptionWire

colour type size1 Motor phase U YEL UL1332 AWG182 Motor phase V RED UL1332 AWG183 Motor phase W BLK UL1332 AWG184 Hall sensor 0V BLK UL1332 AWG22

Hall sensor U BLU UL1332 AWG226 Hall sensor V GRN UL1332 AWG227 Hall sensor W WHT UL1332 AWG228 Hall sensor supply RED UL1332 AWG22

Hall sensor outputs Motor phases powered

Hall U Hall V Hall W Phase U Phase V Phase W1 0 0 HIGH X LOW

1 1 0 X HIGH LOW0 1 0 LOW HIGH X

0 1 1 LOW X HIGH

0 0 1 X LOW HIGH

1 0 1 HIGH LOW X

Connector wiring

Motor commutationFor clockwise rotation, motor phases are powered according to thetable. For anticlockwise rotation, HIGH and LOW phases are inter-changed.

PBL42 motor data

PBL42-67 pictured with Parvalux standard ange

FRAME SIZE 42mm square in 4 different lengthsTYPE DC brushless motorTORQUE 0.062 0.2 Nm continuous

MAX SPEED 4000 rpmVOLTAGE 24V DCCONNECTION Flying leads 30cm exible; terminated in single 8-

way in-line pluggable terminal block connectorCONTROLLER Available with or without controllerSHAFT Double or single ended on requestINSULATION CLASS FIP PROTECTION IP 4 (IP 0 at exposed motor shafts)OPTIONS See page 18

Motor PBL42-47 PBL42-67 PBL42-87 PBL42-107Max rated speed rpm 4000 4000 4000 4000Rated torque Nm 0.062 0.12 0.17 0.2Rated power at max rated speed W 26 2 71 84Peak torque Nm 0.188 0.37 0. 0.7DC bus voltage nominal V 24 24 24 24Back EMF V/krpm 4 4 4 4Torque constant Nm/A 0.047 0.047 0.047 0.047Rated current A rms 1.3 2.7 3.6 4.3Current for peak torque A rms 4.4 8. 13 18Stator resistance (2 C) ohms 1.7 0.8 0. 0.36Number of poles 8 8 8 8Dimension A mm 47 67 87 107Inertia gcm 2 32 6 80 104Weight kg 0.3 0. 6 0.73 0.Connector size - pin pitch mm 3. 3. .08 .08

Motor speed is variable up to 4000 rpm, however maximumspeed is reduced if DC bus voltage is below the nominal value.Standard motor feedback is by open collector Hall effectsensors.

Available with double ended shafts to support a range ofoptional accessories.Alternative mechanical interfaces available.

Torque/speed charcateristics

m u

l t i p l e o

f c o n

t i n u o u s

t o r q u e

speed (rpm)

intermittent operating region

continuous operating region

0.0

1.0

2.0

3.0

0 1000 2000 3000 4000


5/68

P B L 4 2 m o t o r

a n d c o n t r o

l l e r p a c k a g e s

General tolerance on data is +/- 10%; Values shown are at normal operating temperature unless stated.

P B L 4 2 m o t o r

a n d c o n t r o


5 3

DIMENSION 'A'

4 2

FLYING LEADS300mm 10mm

3 5

-0 . 0

5

0 . 0

0

-

33

7.9387.925

4.3

7.9277.920

542.3

8 HOLES 4.29EQUI SPACEDON A 41.3 P.C.D

10mm DEEP.CAN BE TAPPED M5

OPTION: 4 HOLES 4.2THRO' ON A 63.0 P.C.D

PBL42 motor data

Motor PBL42-47 PBL42-67 PBL42-87 PBL42-107

Controller S S N B

Max rated speed rpm 4000 4000 4000 4000

Rated torque Nm 0.062 0.12 0.17 0.2

1 minute rating Nm 0.078 0.16 0.23 0.31

Peak torque (duration 6 seconds) Nm 0.12 0.2 0.37 0.

DC bus voltage nominal V 24 24 24 24

DC bus voltage min-max V 16-32 16-32 16-32 16-32

DC bus current at no load and max rated speed A 0.2 0.27 0.34 0.42

DC bus current at rated torque and max rated speed A 1.8 3.3 4.3

Controller cont. current A 2. 7. 10

Controller peak current A 10 1 20

P a r v a

l u x s t a n

d a r d

a n g e

/ m o u n

t a n d

s h a

f t

2.0

0.0

.

0 1000 2000 3000 4000

speed (rpm)



1 minute rating

m u

l t i p l e o

f c o n

t i n u o u s

t o r q u e

The controllers we supply are matched for each motor inthe range and tested as a pair with the motors during pro-duction.They operate from a 24V supply and have an analogue in-put for motor speed, an input for forward/reverse directionand a pulsed output to indicate motor speed.Most models have an additional input for enable/disableand an output indicating a fault condition.

Torque/speed characteristics


6/68

6

PBL42IE motor data

FRAME SIZE 42 mm square in 3 dif ferent lengths TYPE Brushless DC motor with integral controller TORQUE 0.125 0.2 NmMAX SPEED 4000 rpmVOLTAGE 24V DCCONNECTION Single 7-way in-line pluggable terminal blockCONTROLLER Integral 2-quadrant controller, functionally identical

to S controller (See page 14)SHAFT Single endedINSULATION CLASS FIP PROTECTION IP54 (IP50 at exposed motor shaft and connector)OPTIONS See page 18

PBL42-87IE pictured

Motor type PBL42-67IE PBL42-87IE PBL42-107IEMax rated speed rpm 4000 4000 4000Rated torque Nm 0.125 0.17 0.2Rated power at max speed W 52 71 8415 minute rating Nm 0.16 0.23 0.31Peak torque (duration 6 seconds) Nm 0.25 0.37 0.5DC bus voltage nominal V 24 24 24DC bus voltage min-max V 16-32 16-32 16-32DC bus current at no load and max rated speed A 0.27 0.34 0.42DC bus current at rated torque and max rated speed A 3.3 4.3 5Dimension A mm 67 87 107Dimension B mm 44 56 56Inertia gcm 2 56 80 104Weight kg 0.66 0.85 1Connector size - pin pitch mm 3.5 3.5 3.5

Motor speed is variable up to 4000 rpm, however maximumspeed is reduced if DC bus voltage is below the nominal value.Standard motor feedback is by open collector Hall effectsensors.Recommended maximum ambient temperature for integralcontroller is 30C. Above this temperature, the rating will bereduced.Alternative mechanical interfaces available.


2.0

0.0

.

0 1000 2000 3000 4000

m u l

t i p l e o f c o n t

i n u o u s

t o r q u e



15 minute rating

speed (rpm)

A potentiometer or analogue voltage connected to the SV input willbe required to obtain the constant speed specied on the order andname plate. A 4.7 k potentiometer is supplied.

Connector wiring

General tolerance on data is +/ - 10%; Values shown are at normal operating temperature unless stated.

Pin Label Description

1 Vp+ Supply +V

2 Vp- Supply 0V

3 GND 0V output for control circuits

4 PG Pulse output

5 SV Speed input

6 F/ R Reverse input

7 +5V Supply output for control circuits


7/68

7

PBL42IE motor data

P B L 4 2 I E w

i t h s t a n

d a r d

a n g e

/ m o u n

t a n

d s h a

f t

: : ne

w

ne w p

r o d uct s pot light :: ne w prod uct s pot light :: ne w prod uct s pot light :: ne w prod uct s pot light :: ne w prod uct s pot light :: ne w prod uct s pot light :: ne w pr o d u c t

s p

o t l i g h t : : n

e w pr

o d u c t

s p o

t l i g h t : : n

e w pr

o d u c t

s p o

t l i g h t : : n e w pr

o d u c t

s p o

t l i g h t : : n

e w pr

o d u c t

s p o

t l i g h t : : n

e w pr

o d u c t

s p o t l i g h t : : n e w p r o d u c t s p o t l i g h t : : n e w p r o d u c t s p o t l i g h t : : n e w p r o d u c t s p o t l i g h t : : n e w p r o d u c t s p o t l i g h t : : n e w p r o d u c t s p o t l i g h t : : n e w p r o d u c t s p o t l i g h t

high tensile alloy steel cap-head screws

annulus gear manufactured in high strengthlow alloy steel (HSLA) for med-high bendingstrength; with polished chrome exterior nishas standard; optimised involute form

high capacity ball bearings, capable of highradial loads; twin contact seals ensure gearboxsealing integrity

planet gears, 8% ef cient, manufactured fromhigh grade alloy steel; heat treated in a vacuumto provide low distortion combined with highbending strength and low-wear characteristics

pins heat treated to 60+ HRC and precisioncentreless ground; oversized to provide highrigidity and high side loading capacity forplanet gears

Nitrile rubber seal and o-rings providing

dynamic sealing of gearbox lubricant

construction details

HP planetaryWe are very proud to present our new line of high quality HP planetary gearheads, designedand manufactured in the UK by our skilled team of engineers.The 1-4 stage gearboxes, available in three frame sizes, offer customers an unrivalled choice

of gear ratios, an unbeatable range of input and output ange options and Parvalux reliabilityat an incredible price. They are also the rst ever Parvalux gearboxes available with a servo-coupling to interface with any motor, and come with a polished chrome nish as standard.The range has been designed to operate marginally below that of servo speci cations, allowingus to offer a cutting edge design for a fraction of the cost of a specialised servo applicationgearhead. See page 11 for more details.


8/68

8

Pin DescriptionWire

colour type size1 Motor phase U YEL UL1332 AWG182 Motor phase V RED UL1332 AWG183 Motor phase W BLK UL1332 AWG184 Hall sensor 0V BLK UL1332 AWG22

Hall sensor U BLU UL1332 AWG226 Hall sensor V GRN UL1332 AWG227 Hall sensor W WHT UL1332 AWG228 Hall sensor supply RED UL1332 AWG22


Hall U Hall V Hall W Phase U Phase V Phase W1 0 0 HIGH X LOW

1 1 0 X HIGH LOW0 1 0 LOW HIGH X

0 1 1 LOW X HIGH

0 0 1 X LOW HIGH

1 0 1 HIGH LOW X

Connector wiring


Motor PBL60-78 PBL60-98 PBL60-118 PBL60-138Max rated speed rpm 4000 4000 4000 4000Rated torque Nm 0.11 0.22 0.32 0.44Rated power at max rated speed W 46 2 134 184Peak torque Nm 0.33 0.66 0. 6 1.32DC bus voltage nominal V 24 24 24 24Back EMF V/krpm 4.3 4.3 4.3 4.3Torque constant Nm/A 0.0 0.0 0.0 0.0Rated current A rms 2.2 4.4 6.4 8.8Current for peak torque A rms 7.3 1 21 2Stator resistance (2 C) ohms 0.87 0.32 0.23 0.2Number of poles 4 4 4 4Dimension A mm 7 11 13Inertia gcm 2 71 11 16 21Weight kg 0.7 1 1.3 1.6Connector size - pin pitch mm .08 .08 .08 .08

PBL60 motor data

PBL60-98 pictured with Parvalux standard ange

FRAME SIZE 60 mm square in 4 different lengthsTYPE Brushless DC motorTORQUE 0.11 0.44 NmMAX SPEED 4000 rpmVOLTAGE 24V DCCONNECTION Flying leads 30cm exible; terminated in single 8-

way in-line pluggable terminal block connectorCONTROLLER Available with or without controllerSHAFT Double or single ended on requestINSULATION CLASS FIP PROTECTION IP 4 (IP 0 at exposed motor shafts)OPTIONS See page 18




m u

l t i p l e o

f c o n

t i n u o u s

t o r q u e

speed (rpm)



0.0

1.0

2.0

3.0

0 1000 2000 3000 4000


9/68

P a r v a

l u x s t a n

d a r d

a n g e

/ m o u n

t a n d

s h a

f t


P B L 6 0 m o t o r

a n d c o n t r o



Controller ref. N N B B

Max rated speed rpm 4000 4000 4000 4000

Rated torque Nm 0.11 0.22 0.32 0.44

1 minute rating Nm 0.14 0.28 0.4 0.

Peak torque (duration 6 seconds) Nm 0.22 0.44 0.64 0.88

DC bus voltage nominal V 24 24 24 24

DC bus voltage min-max V 16-32 16-32 16-32 16-32

DC bus current at no load and max rated speed A 0.2 0.38 0. 0.6

DC bus current at rated torque and max rated speed A 3 . 7. 10

Controller cont. current A 7. 10 1

Controller peak current A 10 1 20 30

PBL60 motor data

2.0

0.0

.

0 1000 2000 3000 4000

speed (rpm)

m u

l t i p l e o

f c o n

t i n u o u s

t o r q u e



1 minute rating

Torque/speed characteristics The controllers we supply are matched for each motor inthe range and tested as a pair with the motors during pro-duction.They operate from a 24V supply and have an analogue in-put for motor speed, an input for forward/reverse directionand a pulsed output to indicate motor speed.Most models have an additional input for enable/disableand an output indicating a fault condition.


10/68

10

2.0

0.0

.

0 1000 2000 3000 4000

PBL60IE motor data


FRAME SIZE 60 mm square in 3 different lengthsTYPE Brushless DC motor with integral controllerTORQUE 0.22 0.44 NmMAX SPEED 4000 rpmVOLTAGE 24V DC, 48V DCCONNECTION Single 7-way in-line pluggable terminal blockCONTROLLER Integral 2-quadrant controller, functionally identical

to S controller (See page 14)SHAFT Single endedINSULATION CLASS FIP PROTECTION IP 4 (IP 0 at exposed motor shaft and connector)OPTIONS See page 18 PBL60-118IE pictured

Motor type PBL60-98IE PBL60-118IE PBL60-138IEMax rated speed rpm 4000 4000 4000Rated torque Nm 0.22 0.32 0.44Rated power at max speed W 2 134 1841 minute rating Nm 0.28 0.4 0.Peak torque (duration 6 seconds) Nm 0.44 0.64 0.88DC bus voltage nominal V 24 24 48DC bus voltage min-max V 16-32 16-32 20- 8DC bus current at no load and max rated speed A 0.38 0. 0.32DC bus current at rated torque and max rated speed A . 7.Dimension A mm 11 13Dimension B mm 61 61 61Inertia gcm 2 11 16 21Weight kg 1.2 1. 1.8Connector size - pin pitch mm 3. 3. 3.

Motor speed is variable up to 4000 rpm, however maximumspeed is reduced if DC bus voltage is below the nominal value.PBL60-138IE will operate from 24V supply with a rated speedof 2000rpm.Standard motor feedback is by open collector Hall effectsensors.

Recommended maximum ambient temperature for integralcontroller is 30C. Above this temperature, the rating will bereduced.Alternative mechanical interfaces available.


Pin Label Description

1 Vp+ Supply +V

2 Vp- Supply 0V

3 GND 0V output for control circuits4 PG Pulse output

SV Speed input6 F/R Reverse input

7 + V Supply output for control circuits

m u

l t i p l e o

f c o n

t i n u o u s

t o r q u e



1 minute rating

speed (rpm)

A potentiometer or analogue voltage connected to the SV input willbe required to obtain the constant speed speci ed on the order andname plate. A 4.7 k potentiometer is supplied.

Connector wiring


11/68

11

PBL60IE motor data

P B L 6 0 I E w

i t h s t a n

d a r d

a n g e

/ m o u n

t a n

d s h a

f t

HP planetaryFrame sizesThe HP planetary gearbox comes in3 standard sizes 42, 60 and 86mm;each available in a 1,2,3 or 4 stage

assembly, offering a choice of 12different gearheads in total.

Input angeManufactured in die cast aluminiumalloy, with precision machinedfeatures, offering complete inputexibility. Available with customised

xing arrangements when suppliedas a direct- t or servo-couplinggearbox.

Output angeManufactured in die cast aluminiumalloy, with precision machinedfeatures, offering completeoutput exibility. Available withcustomised output ange and xingarrangements for your application;including Metric standard; NEMAsquare-frame; IEC B14 ( 6, 63 & 71)frame sizes and other standard andnon-standard xing arrangements.

Output speedEach frame size offers you theopportunity to select from one of3 standard gear ratios or from anadditional 34 non-standard ratiosbetween 4:1 and 2401:1.

Output shaftManufactured with high rigidity in aone-piece design that utilises highgrade stainless steel as standard.

For more information speak to yourlocal sales representative, visit ourwebsite www.parvalux.com o r calla member of the sales team on+44 (0)1202 12 7

Option : servo-couplingMaking use of proven clampedsegment design, the HP planetaryrange is the rst ever Parvaluxgearbox to offer a standard servo-coupling, allowing simple ttingand re- tting of the unit to a motor.The design permanently enableszero backlash at point of coupling.Available in a wide range of standardbore sizes.

:: highly ef cient ::

:: highly customisable ::

:: made in Britain ::

: : ne

w

ne w p

r o d uct s pot light :: ne w prod uct s pot light :: ne w prod uct s pot light :: ne w prod uct s pot light :: ne w prod uct s pot light :: ne w prod uct s pot light :: ne w pr o d u c t

s p

o t l i g h t : : n

e w pr

o d u c t

s p o

t l i g h t : : n

e w pr

o d u c t

s p o

t l i g h t : : n e w pr

o d u c t

s p o

t l i g h t : : n

e w pr

o d u c t

s p o

t l i g h t : : n

e w pr

o d u c t

s p o t l i g h t : : n e w p r o d u c t s p o t l i g h t : : n e w p r o d u c t s p o t l i g h t : : n e w p r o d u c t s p o t l i g h t : : n e w p r o d u c t s p o t l i g h t : : n e w p r o d u c t s p o t l i g h t : : n e w p r o d u c t s p o t l i g h t
http://www.parvalux.com/http://www.parvalux.com/


12/68

12

PBL86 motor data

Motor PBL86-91 PBL86-91 PBL86-118 PBL86-145Rated speed rpm 3000 3000 3000 3000Max speed rpm 4000 4000 4000 4000Rated torque Nm 0.7 0.7 1.1 1.4Rated power W 220 220 346 440Peak torque Nm 2.1 2.1 3.3 4.2DC bus voltage nominal V 24 48 48 48Back EMF V/krpm . . . .Torque constant Nm/A 0.06 0.11 0.11 0.11Rated current A rms 12 7 11 14Current for peak torque A rms 40 23 37 47Stator resistance (2 C) ohms 0.08 0.22 0.08 0.06Number of poles 8 8 8 8Dimension A mm 1 1 118 14Inertia gcm 2 1100 1100 2100 3100Weight kg 2.2 2.2 3.2 4.2

Connector size - no of pins 8Connector size - pin pitch mm 3. .08 3. 3.

PBL86 pictured with Parvalux standard ange

FRAME SIZE 86 mm square in 3 lengthsTYPE Brushless DC motorTORQUE 0.7 1.4 NmMAX SPEED 4000 rpmVOLTAGE 24V, 48V DCCONNECTION Flying leads 30cm exible; terminated in single 8-

way or -way (Hall sensors only) in-line pluggableterminal block connector

CONTROLLER Available with or without controllerSHAFT Double or single ended on requestINSULATION CLASS FIP PROTECTION IP 4 (IP 0 at exposed motor shafts)OPTIONS See page 18

PinDescription

Wire

8-pinconnector

-pinconnector colour type size

1 - Motor phase U YEL UL1332 AWG162 - Motor phase V RED UL1332 AWG163 - Motor phase W BLK UL1332 AWG164 1 Hall sensor 0V BLK UL1332 AWG22

2 Hall sensor U BLU UL1332 AWG226 3 Hall sensor V GRN UL1332 AWG227 4 Hall sensor W WHT UL1332 AWG228 Hall sensor supply RED UL1332 AWG22




0.0

1.0

2.0

3.0

0 1000 2000 3000 4000

0.0

0.

1.0

1.

2.0

2.

0 1000 2000 3000 4000

m u

l t i p l e o

f c o n

t i n u o u s

t o r q u e

speed (rpm)

intermittentoperating region

continuousoperating region



48V 24V

t o r q u e

( N m

)

Connector wiring



Hall U Hall V Hall W Phase U Phase V Phase W

1 0 0 HIGH X LOW1 1 0 X HIGH LOW

0 1 0 LOW HIGH X

0 1 1 LOW X HIGH

0 0 1 X LOW HIGH

1 0 1 HIGH LOW X


13/68

13

P a r v a

l u x s t a n

d a r d

a n g e

/ m o u n

t a n d

s h a

f t

P B L 8 6 m o t o r a n

d c o n t r o



Controller ref. 50B B 50B 50BRated speed rpm 3000 3000 3000 3000Max speed rpm 4000 4000 4000 4000Rated torque Nm 0.7 0.7 1.1 1.41 minute rating Nm 0. 0.8 1. 2.1Peak torque (duration 6 seconds) Nm 1.4 1 2.2 2.8

DC bus voltage nominalV

24 48 48 48DC bus voltage min-max V 16-32 36- 8 16- 8 16- 8DC bus current at no load and rated speed A 1.1 0.6 0.8 1DC bus current at rated torque and rated speed A 11.8 . 8.7 11.2Controller cont. current A 2 10 2 2Controller peak current A 0 20 0 0

PBL86 motor data

speed (rpm)

t o r q u e

( N m

)

Torque/speed characteristicsDotted line shows performance limit on 24V DC bus.

0

0.

1

1.

0 1000 2000 3000 40000

0.

1

0 1000 2000 3000 4000

0

0.

1

1.

2

2.

0 1000 2000 3000 40000

0.

1

1.

2

2.

3

0 1000 2000 3000 4000

PBL86-91 24V PBL86-91 48V PBL86-118 48V PBL86-145 48V



1 minute rating



1 minute rating



1 minute rating



1 minute rating


Most models have an additional input for enable/disableand an output indicating a fault condition.PBL86-118 and 14 motor and controller packages willoperate from 24V supply with a rated speed of 2000rpm.

The controllers we supply are matched for each motor inthe range and tested as a pair with the motors during pro-duction.They operate from a 24V or 48V supply and have an ana-logue input for motor speed, an input for forward/reversedirection and a pulsed output to indicate motor speed.


14/68


15/68


16/68

16

N and B controllers

N controller outline drawing

B controller outline drawing


17/68

17

Controller type Brushless DC controller2 quadrant (reversible rotation)

Supply voltage 24 V DC or 48 V DC (16- 8 V)Continuous current PBLC 0B86- 1-24 2 A

PBLC 0B86-118-48 2 APBLC 0B86-14 -48 2 A

Peak current 2 x continuous currentControl method Closed loop speed control

Block commutation with pulse width modulation (PWM)Motor feedback 3 Hall sensors, 120 electrical degree spacingSwitching devices 6 MOSFET transistorsSwitching frequency 12 kHzAnalogue speed input Speed input for analogue voltage or potentiometer

Maximum speed is adjusted using SV ADJ. preset on side of controller.For controllers sold with geared motors, speed is preset during manufacture.

3 digital inputs (switch or TTL) F/R connect to 0V for reverse (anticlockwise) rotation.-EN connect to 0V to enable.Do not change status of F/R input while motor is rotating.

2 digital outputs(open collector)

-PG Motor speed pulse output. Logic 0 (low) pulses 0.0 ms longPulses per rev = 3 * number of poles.Frequency in Hz = (motor rpm/60) * 3 * number of poles.

-ALM Fault output. Low under fault condition.2 status LEDs PWR/ALM Lights when power is connected. Blinks under fault condition

eg peak current reached, supply voltage low, motor notconnected. Blinks for a few seconds after continuous currentexceeded.

SHAFT Lights when shaft is turningSupply output for control circuits 0V and +6.2 V provided for potentiometer etc. Max current 10 mA.Construction Finned aluminium chassis/heat sink

Enclosed construction with pressed steel coverSlots for mounting screws provided on 2 faces

Connectors Separate in-line connectors for power supply (10.16 mm pitch), motor phases (10.16mm pitch), motor feedback (3. mm pitch) and control (3. mm pitch)Mating connectors are supplied with controller

Weight 0.8 kg

4 7

50B controller wiring example and outline drawing

50B controller


18/68

18

customisationoptions

Parvalux motors and gearboxes can be customised to the exact needsof the application. Increasingly, we are providing geared motor unitswith extra components speci ed by customers in order to provide acomplete sub-assembly, saving both time and cost. Some of our manyoptions are described below. If the option that you are looking for is notshown, please do not hesitate to contact us to discuss we may well havea solution that meets your needs.

ConnectorWe can t a huge range of connectors or crimps to our motor cablesaccording to your speci cation.

BrakeWe provide a standard range of high-quality spring applied brakes toprovide either static-holding or dynamic braking. Our standard ranges

from 0.4Nm 1.0Nm operating on a low voltage DC supply. Alternativebrakes are available on request.

EncoderWe provide a standard range of HEDS compatible dual channel encodersoffering 200 12 0CPR output ( 00CPR as standard) with index pulse.These high-performance encoders are mounted to the rear of the motor;however, we are also able to provide custom-speci c mounting on thegearbox output shaft. If an alternative style of encoder is required,we are happy to source an alternative or provide a custom-speci csolution.

Terminal boxWe offer a die cast terminal box (Ingress Protection IP 4) for motorand brake connections with the PBL60 and PBL86 models, which issuitable for cable diameters up to 10mm (motor phases) and 7mm (Hallsensors). Includes 6-way AMP connector tted to Hall effect sensorleads, earth screw for cable screens and two rear facing cable glands.Can be supplied with screened ying leads.

Bespoke solutionsAs well as providing a large range of design options based on customisingexisting designs, we are able to provide bespoke solutions (out-and-outspecials) for medium high volume applications. In such cases ourin-house design team are able to model new designs to allow rapidprototyping and test. With a strong design element as well as modernmanufacturing and low cost supply chain, we are often able to providecost-effective solutions quickly.

Paint nishStandard paint nish is Parvalux blue applied to induction, series woundand permanent geared motors. Planetary geared motors are powdercoated blue and DC brushless motors are painted black. Alternativepaint colours are available on request.

ShaftMotors are supplied with double ended shaft as standard or singleended shaft as an option. A blanking plug (3mm extra length) can besupplied tted in the rear shaft hole on PBL60 and PBL86 motors withsingle ended shaft. In addition to the standard gearbox shafts shownin the catalogue, we can produce special keyways, ats and otherspecial ttings to speci c requirements. Shaft material as standard is acarbon-steel, alternative materials can be requested.

M3P3 point xing optionSee page 7

S3P3 point xing optionSee page 7

Incremental encoderpictured with PBL60See page 60

1.0 Nm holding brakepictured with PBL86See page

MFange optionSee page 8

Terminal boxpictured with PBL60 and3mm blanking plug

keyway threadedat v-beltcross-hole splinedtiming belt gear


19/68

1

selection guide

* Continuous rated power** Continuous output torque*** Radial loads are measured at the mid-point of the shaft extension**** On application

Type CodeShaft

Orientation

Power (Watts)* Speed (rpm) Torque (Nm)** Load (N)

PagesMin Max Min Max Min Max Radial*** Axial

PBL42 in-line 10 84 0 4000 0. 06 0.20 **** **** 4

PBL42IE in-line 20 84 0 4000 0.12 0.20 **** **** 6

PBL60 in-line 17 184 0 4000 0. 11 0. 44 **** **** 8

PBL60IE in-line 3 184 0 4000 0.22 0.44 **** **** 10

PBL86 in-line 110 440 0 4000 0.70 1.40 **** **** 12

S 0 10 84 38 640 0.30 3. 0 6 3 20 - 23

M 0 17 220 2 480 0.70 11.80 132 88 24 - 2

MB / MF 0 17 220 2 480 0.70 11.80 226 108 24 - 2

LS / LSH 0 17 346 2 432 0.70 1 .20 314 1 6 30 - 3

G / GH 0 110 440 20 240 6.60 0.00 4 1 2 4 36 - 38

SIW in-line 17 134 1.1 102 2. 0 11.30 78 4 3 - 41

MIW in-line 17 184 1.1 77 3.20 28.00 26 132 42 - 4

SWS 0 10 2 1.1 4 3.60 11.00 177 112 46 - 47

MWS 0 17 134 1.1 8 3.30 4 .00 3 3 177 48 - 0

LWS 0 17 184 0.8 80 3.40 100.00 446 226 1 - 4

GWS 0 0 184 0. 44 1 .40 2 0.00 667 3 3 - 6

motors only

worm

in-line double worm

worm spur


20/68

20

See page 61 to specify shaft and gearbox positioninput speed variable up to 4000 rpm; other ratios available on request

PBL42-47S

RatioFinal speed (rpm)

Rated torque Nmup to 4000 rpm

Peak torque Nmup to 2000 rpm

15 min rating Nmup to 3500 rpm

1500 rpm10 W

2000 rpm13 W

3000 rpm20 W

4000 rpm26W Composite Bronze Composite Bronze Composite Bronze

40:1 38 0 7 100 1.1 - 2.2 - 1.4 -

36:1 42 6 83 111 1 - 2 - 1.3 -

33:1 4 61 1 121 1 - 1. - 1.2 -

27:1 6 74 111 148 0. - 1.7 - 1.1 -

20 1/2:1 73 8 146 1 0.7 - 1.4 - 0. -

18 1/2:1 81 108 162 216 0.7 - 1.3 - 0.8 -

16 1/2:1 1 121 182 242 0.6 - 1.2 - 0.8 -

12 1/2:1 120 160 240 320 0. - 1 - 0.6 -

11 1/3:1 132 176 26 3 3 0. - 0. - 0.6 -

10 1/3:1 14 1 4 2 0 387 0.4 - 0. - 0. -

8 1/3:1 180 240 360 480 0.4 - 0.7 - 0. -

6 1/4:1 240 320 480 640 0.3 - 0.6 - 0.4 -

144PBL42-47 =PBL42-67 = 164PBL42-87 = 184

PBL42-107 = 204

47PBL42-47 =PBL42-67 = 67PBL42-87 = 87

PBL42-107 = 1075

4 2

4 2 x

44

5353 x


5 2

7 . 9

3 8

7 . 9

2 5

3328

2 0

. 4

31

2 8

3 5

29

6

4

4 HOLES EACH SIDE EQUI SPACEDON A 41.3mm P.C.D. CAST 4.2mmSUITABLE FOR 10-24 TAPTITE SCREWS.CAN BE TAPPED M5 x 5mm DEEPON REQUEST

9mm h6FLAT 6mm x19mm LONG

MOTOR Brushless DC motorPROTECTION IP 4 (IP 0 at exposed rear motor shaft)GEARBOX Worm and wheel (S)MOTOR POWER 10 - 26 Watts

SPEED

38 - 640 rpmVOLTAGE 24V DCWEIGHT 0.8 kgCONTROLLER SSHAFT TYPE Single ended or double ended upon requestEXTRAS See page 18


21/68

21


PBL42-67(IE)S





1500 rpm20 W

2000 rpm26 W

3000 rpm39 W

4000 rpm52 W Composite Bronze Composite Bronze Composite Bronze

40:1 38 0 7 100* 2.2 2.2 2. 4.4 2.8 2.8

36:1 42 6 83* 111* 2 2 2. 4.1 2.6 2.6

33:1 4 61 1* 121* 1. 1. 2. 3. 2. 2.

27:1 6 74 111 148* 1.7 1.7 2. 3.4 2.2 2.2

20 1/2:1 73 8 146 1 * 1.4 1.4 2. 2. 1.8 1.8

18 1/2:1 81 108 162 216* 1.3 - 2.7 - 1.7 -

16 1/2:1 1 121 182 242* 1.2 - 2. - 1.6 -

12 1/2:1 120 160 240 320 1 - 2 - 1.3 -

11 1/3:1 132 176 26 3 3 0. - 1. - 1.2 -

10 1/3:1 14 1 4 2 0 387 0. - 1.8 - 1.1 -

8 1/3:1 180 240 360 480 0.7 - 1. - 1 -

6 1/4:1 240 320 480 640 0.6 - 1.2 - 0.8 -

* Please refer to the information regarding thermal rating on page 64 for these combinations of motor speed and gear ratio

144PBL42-47 =PBL42-67 = 164PBL42-87 = 184

PBL42-107 = 204

47PBL42-47 =PBL42-67 = 67PBL42-87 = 87

PBL42-107 = 1075

4 2

4 2 x

44

5353 x


5 2

7 . 9

3 8

7 . 9

2 5

3328

2 0

. 4

31

2 8

3 5

29

6

4




SPEED

38 - 640 rpmVOLTAGE 24V DCWEIGHT 0. kgCONTROLLER S (or integral with IE model)SHAFT TYPE Single ended or double ended upon requestEXTRAS See page 18

PBL42-67S pictured


22/68

22


PBL42-87(IE)S





1500 rpm27 W

2000 rpm36 W

3000 rpm53 W


40:1 38 0 7 * 100* 2. 3 2. 4. 2. 4

36:1 42 6 83* 111* 2.8 2.8 2. 4. 2. 3.8

33:1 4 61 1* 121* 2.6 2.6 2. 4. 2. 3.6

27:1 6 74 111* 148* 2.3 2.3 2. 4. 2. 3.1

20 1/2:1 73 8 146* 1 * 1. 1. 2. 4.2 2.6 2.6

18 1/2:1 81 108 162* 216* 1.8 1.8 2. 3. 2.4 2.4

16 1/2:1 1 121 182* 242* 1.7 1.7 2. 3.6 2.3 2.3

12 1/2:1 120 160 240 320* 1.4 1.4 2. 3 1. 1.

11 1/3:1 132 176 26 3 3* 1.3 - 2.8 - 1.7 -

10 1/3:1 14 1 4 2 0 387* 1.2 - 2.6 - 1.6 -

8 1/3:1 180 240 360 480 1 - 2.2 - 1.4 -

6 1/4:1 240 320 480 640 0.8 - 1.8 - 1.1 -


144PBL42-47 =PBL42-67 = 164PBL42-87 = 184

PBL42-107 = 204

47PBL42-47 =PBL42-67 = 67PBL42-87 = 87

PBL42-107 = 1075

4 2

4 2 x

44

5353 x


5 2

7 . 9

3 8

7 . 9

2 5

3328

2 0

. 4

31

2 8

3 5

29

6

4




SPEED

38 - 640 rpmVOLTAGE 24V DCWEIGHT 1.1 kgCONTROLLER N (or integral with IE model)SHAFT TYPE Single ended or double ended upon requestEXTRAS See page 18

PBL42-87S pictured


23/68

23


PBL42-107(IE)S





1500 rpm31 W

2000 rpm42 W

3000 rpm63 W


40:1 38 0 7 * 100* 2. 3. 2. 4. 2. 4.

36:1 42 6* 83* 111* 2. 3.3 2. 4. 2. 4.

33:1 4 61* 1* 121* 2. 3.1 2. 4. 2. 4.

27:1 6 74* 111* 148* 2.7 2.7 2. 4. 2. 4.2

20 1/2:1 73 8 146* 1 * 2.3 2.3 2. 4. 2. 3.

18 1/2:1 81 108 162* 216* 2.1 2.1 2. 4. 2. 3.3

16 1/2:1 1 121 182* 242* 2 2 2. 4. 2. 3

12 1/2:1 120 160 240* 320* 1.6 1.6 2. 4 2. 2.

11 1/3:1 132 176 26 * 3 3* 1. 1. 2. 3.8 2.3 2.3

10 1/3:1 14 1 4 2 0* 387* 1.4 1.4 2. 3. 2.2 2.2

8 1/3:1 180 240 360 480* 1.2 1.2 2. 3 1. 1.

6 1/4:1 240 320 480 640* 1 - 2.4 - 1. -


144PBL42-47 =PBL42-67 = 164PBL42-87 = 184

PBL42-107 = 204

47PBL42-47 =PBL42-67 = 67PBL42-87 = 87

PBL42-107 = 1075

4 2

4 2 x

44

5353 x


5 2

7 . 9

3 8

7 . 9

2 5

3328

2 0

. 4

31

2 8

3 5

29

6

4




SPEED

38 - 640 rpmVOLTAGE 24V DCWEIGHT 1.3 kgCONTROLLER B (or integral with IE model)SHAFT TYPE Single ended or double ended upon requestEXTRAS See page 18

PBL42-107S pictured


24/68

24


PBL60-78M/MB





1500 rpm17 W

2000 rpm23 W

3000 rpm35 W


60:1 2 33 0 67 2.4 - 4.8 - 3 -

48:1 31 42 63 83 2.1 - 4.3 - 2.7 -

40:1 38 0 7 100 1. - 3.8 - 2.4 -

30:1 0 67 100 133 1.6 - 3.2 - 2 -

2 :1 60 80 120 160 1.4 - 2. - 1.8 -

16 1/2:1 1 121 182 242 1.1 - 2.2 - 1.4 -

1 1/2:1 7 12 1 4 2 8 1 - 2.1 - 1.3 -

12 1/3:1 122 162 243 324 0. - 1.8 - 1.1 -

10 1/3:1 14 1 4 2 0 387 0.8 - 1. - 1 -

1/3:1 161 214 321 42 0.7 - 1.4 - 0. -

8 1/3:1 180 240 360 480 0.7 - 1.3 - 0.8 -


4 HOLES EACH SIDE EQUI SPACEDON A 47.6mm P.C.D. CAST 3.8mm

SUITABLE FOR 8-32 TAPTITE SCREWS.CAN BE TAPPED M5 x 6mm DEEPON REQUEST

PBL60-78M pictured

MOTOR Brushless DC motorPROTECTION IP 4 (IP 0 at exposed rear motor shaft)GEARBOX Worm and wheel (M)MOTOR POWER 17 - 46 Watts

SPEED

2 - 480 rpmVOLTAGE 24V DCWEIGHT 1.4 kgCONTROLLER NSHAFT TYPE Single ended as standard; hollow or double ended upon

requestEXTRAS See page 18


25/68

2


PBL60-98(IE)M /MB





1500 rpm35W

2000 rpm46 W

3000 rpm69 W


60:1 2 33 0* 67* 4.8 4.8 . 7. . 6.1

48:1 31 42 63* 83* 4.3 4.3 . 7. .4 .4

40:1 38 0 7 * 100* 3.8 - 7.7 - 4. -

30:1 0 67 100 133* 3.2 - 6.4 - 4.1 -

2 :1 60 80 120 160* 2. - .7 - 3.6 -

16 1/2:1 1 121 182 242 2.2 - 4.3 - 2.8 -

1 1/2:1 7 12 1 4 2 8 2.1 - 4.1 - 2.6 -

12 1/3:1 122 162 243 324 1.8 - 3. - 2.2 -

10 1/3:1 14 1 4 2 0 387 1. - 3.1 - 2 -

1/3:1 161 214 321 42 1.4 - 2. - 1.8 -

8 1/3:1 180 240 360 480 1.3 - 2.6 - 1.7 -





PBL60-98M pictured


SPEED

2 - 480 rpmVOLTAGE 24V DCWEIGHT 1.7 kgCONTROLLER N (or integral with IE model)SHAFT TYPE Single ended as standard; hollow or double ended upon



26/68

26


PBL60-118(IE)M /MB

RatioFinal speed (r.p.m)




1500 rpm50 W

2000 rpm67 W

3000 rpm101 W


60:1 2 33 0* 67* . 7 . 7. . 7.

48:1 31 42* 63* 83* . 6.2 . 7. . 7.7

40:1 38 0 7 * 100* .6 .6 7. 11.2 7 7

30:1 0 67 100* 133* 4.7 4.7 7. .4 . .

2 :1 60 80 120* 160* 4.2 4.2 7. 8.3 .2 .2

16 1/2:1 1 121 182* 242* 3.1 - 6.3 - 3. -

1 1/2:1 7 12 1 4* 2 8* 3 - 6 - 3.8 -

12 1/3:1 122 162 243 324* 2.6 - .1 - 3.2 -

10 1/3:1 14 1 4 2 0 387* 2.2 - 4. - 2.8 -

1/3:1 161 214 321 42 * 2.1 - 4.2 - 2.6 -

8 1/3:1 180 240 360 480 1. - 3.8 - 2.4 -





PBL60-118M pictured


SPEED

2 - 480 rpmVOLTAGE 24V DCWEIGHT 2.0 kgCONTROLLER B (or integral with IE model)SHAFT TYPE Single ended as standard; hollow or double ended upon



27/68

27


PBL60-138(IE)M /MB






1500 rpm69 W

2000 rpm92 W

3000 rpm138 W


60:1 2 33 0* 67* . 7. . 7. . 7.

48:1 31 42* 63* 83* . 7. . 7. . 7.

40:1 38* 0* 7 * 100* 7.7 7.7 7. 11.8 7. .6

30:1 0 67* 100* 133* 6.4 6.4 7. 11.8 7. 8

2 :1 60 80* 120* 160* .7 .7 7. 11. 7.2 7.2

16 1/2:1 1 121 182* 242* 4.3 4.3 7. 8.6 .4 .4

1 1/2:1 7 12 1 4* 2 8* 4.1 4.1 7. 8.3 .2 .2

12 1/3:1 122 162 243* 324* 3. - 7 - 4.4 -

10 1/3:1 14 1 4 2 0* 387* 3.1 - 6.2 - 3. -

1/3:1 161 214 321* 42 * 2. - .7 - 3.6 -

8 1/3:1 180 240 360* 480* 2.6 - .3 - 3.3 -




PBL60-138M pictured


SPEED

2 - 480 rpmVOLTAGE 24V DC (or 48V DC with IE model)WEIGHT 2.3 kgCONTROLLER B (or integral with IE model)SHAFT TYPE Single ended as standard; hollow or double ended upon



28/68

28


PBL86-91M/MB 24V




15min rating Nmup to 3000 rpm

1500 rpm110 W

2000 rpm147 W


60:1 2 33 0* . 7. . 7. . 7.

48:1 31 42* 63* . 7. . 7. . 7.

40:1 38* 0* 7 * 7. 11.8 7. 11.8 7. 11.8

30:1 0* 67* 100* 7. 10.2 7. 11.8 7. 11.8

2 :1 60* 80* 120* 7. .1 7. 11.8 7. 11.7

16 1/2:1 1* 121* 182* 6. 6. 7. 11.8 7. 8.8

1 1/2:1 7* 12 * 1 4* 6.6 6.6 7. 11.8 7. 8.

12 1/3:1 122* 162* 243* .6 .6 7. 11.2 7.2 7.2

10 1/3:1 14 1 4* 2 0* 4. 4. 7. .8 6.3 6.3

1/3:1 161 214* 321* 4.6 4.6 7. .1 . .

8 1/3:1 180 240* 360* 4.2 4.2 7. 8.4 .4 .4


4 HOLES EACH SIDE EQUI SPACEDON A 47.6mm P.C.D. CAST 3.8mmSUITABLE FOR 8-32 TAPTITE SCREWS.CAN BE TAPPED M5 x 6mm DEEPON REQUEST.

PBL86-91M pictured


SPEED

2 - 360 rpmVOLTAGE 24V DCWEIGHT 2. kgCONTROLLER 0BSHAFT TYPE Single ended as standard; hollow or double ended upon



29/68

2


PBL86-91M/MB 48V






1500 rpm110 W

2000 rpm147 W


60:1 2 33 0* . 7. . 7. . 7.

48:1 31 42* 63* . 7. . 7. . 7.

40:1 38* 0* 7 * 7. 11.8 7. 11.8 7. 11.8

30:1 0* 67* 100* 7. 10.2 7. 11.8 7. 11.7

2 :1 60* 80* 120* 7. .1 7. 11.8 7. 10.4

16 1/2:1 1* 121* 182* 6. 6. 7. .8 7. 7.

1 1/2:1 7* 12 * 1 4* 6.6 6.6 7. .4 7. 7.

12 1/3:1 122* 162* 243* .6 .6 7. 8 6.4 6.4

10 1/3:1 14 1 4* 2 0* 4. - 7 - .6 -

1/3:1 161 214* 321* 4.6 - 6. - .2 -

8 1/3:1 180 240* 360* 4.2 - 6 - 4.8 -

4 HOLES EACH SIDE EQUI SPACEDON A 47.6mm P.C.D. CAST 3.8mmSUITABLE FOR 8-32 TAPTITE SCREWS.CAN BE TAPPED M5 x 6mm DEEPON REQUEST.

PBL86-91M pictured


SPEED

2 - 360 rpmVOLTAGE 48V DCWEIGHT 2. kgCONTROLLER BSHAFT TYPE Single ended as standard; hollow or double ended upon



30/68

30


PBL60-78LS/LSH





1500 rpm17 W

2000 rpm23 W

3000 rpm35 W


60:1 2 33 0 67 2.4 - 4.8 - 3 -

0:1 30 40 60 80 2.2 - 4.4 - 2.8 -

40:1 38 0 7 100 1. - 3.8 - 2.4 -

30 1/2:1 4 66 8 131 1.6 - 3.3 - 2.1 -

2 1/2:1 78 118 1 7 1. - 2. - 1.8 -

20 1/2:1 73 8 146 1 1.3 - 2. - 1.6 -

1 1/3:1 8 130 1 6 261 1 - 2.1 - 1.3 -

12 1/3:1 122 162 243 324 0. - 1.8 - 1.1 -

1/4:1 162 216 324 432 0.7 - 1.4 - 0. -

PBL60-78LS pictured

MOTOR Brushless DC motorPROTECTION IP 4 (IP 0 at exposed rear motor shaft)GEARBOX Worm and wheel (LS)MOTOR POWER 17 - 46 Watts

SPEED

2 - 432 rpmVOLTAGE 24V DCWEIGHT 1.8 kgCONTROLLER NSHAFT TYPE Single ended as standard; hollow or double ended upon



31/68

31






1500 rpm35 W

2000 rpm46 W

3000 rpm69 W


60:1 2 33 0 67 4.8 - .6 - 6.1 -

0:1 30 40 60 80 4.4 - 8.7 - . -

40:1 38 0 7 100 3.8 - 7.7 - 4. -

30 1/2:1 4 66 8 131 3.3 - 6. - 4.1 -

2 1/2:1 78 118 1 7 2. - .8 - 3.7 -

20 1/2:1 73 8 146 1 2. - - 3.2 -

1 1/3:1 8 130 1 6 261 2.1 - 4.1 - 2.6 -

12 1/3:1 122 162 243 324 1.8 - 3. - 2.2 -

1/4:1 162 216 324 432 1.4 - 2.8 - 1.8 -

PBL60-98(IE)LS/LSH

PBL60-98LS pictured


SPEED

2 - 432 rpmVOLTAGE 24V DCWEIGHT 2.1 kgCONTROLLER N (or integral with IE model)SHAFT TYPE Single ended as standard; hollow or double ended upon



32/68

32






1500 rpm50 W

2000 rpm67 W

3000 rpm101 W


60:1 2 33 0* 67* 7 7 11.3 13. 8.7 8.7

0:1 30 40 60* 80* 6.3 6.3 11.3 12.7 7. 7.

40:1 38 0 7 100* .6 - 11.2 - 7 -

30 1/2:1 4 66 8 131* 4.7 - . - . -

2 1/2:1 78 118 1 7* 4.2 - 8.4 - .3 -

20 1/2:1 73 8 146 1 3.6 - 7.3 - 4.6 -

1 1/3:1 8 130 1 6 261 3 - 6 - 3.7 -

12 1/3:1 122 162 243 324 2.6 - .1 - 3.2 -

1/4:1 162 216 324 432 2.1 - 4.1 - 2.6 -

PBL60-118(IE)LS/LSH


PBL60-118LS pictured

MOTOR Brushless DC motorPROTECTION IP 4 (IP 0 at exposed rear motor shaft)GEARBOX Worm and wheel (LS)MOTOR POWER 0 -134 Watts

SPEED

2 -432 rpmVOLTAGE 24V DCWEIGHT 2.4 kgCONTROLLER B (or integral with IE model)SHAFT TYPE Single ended as standard; hollow or double ended upon



33/68

33






1500 rpm69 W

2000 rpm92 W

3000 rpm138 W


60:1 2 33 0* 67* .6 .6 11.3 17 11.3 12

0:1 30 40 60* 80* 8.7 8.7 11.3 17 10. 10.

40:1 38 0 7 * 100* 7.7 7.7 14.6 1 .3 .6 .6

30 1/2:1 4 66 8* 131* 6. - 13 - 8.1 -

2 1/2:1 78 118* 1 7* .8 - 11.6 - 7.3 -

20 1/2:1 73 8 146* 1 * - 10 - 6.3 -

1 1/3:1 8 130 1 6 261* 4.1 - 8.2 - .1 -

12 1/3:1 122 162 243 324* 3. - 7 - 4.4 -

1/4:1 162 216 324 432 2.8 - .7 - 3.6 -

PBL60-138(IE)LS/LSH



MOTOR Brushless DC motorPROTECTION IP 4 (IP 0 at exposed rear motor shaft)GEARBOX Worm and wheelMOTOR POWER 6 - 184 Watts

SPEED

2 -432 rpmVOLTAGE 24V DC (or 48V DC with IE model)WEIGHT 2.7 kgCONTROLLER B (or integral with IE model)SHAFT TYPE Single ended as standard; hollow or double ended upon



34/68

34



Ratio

Final speed (rpm)Rated torque Nmup to 3000 rpm



1500 rpm110 W

2000 rpm147 W


60:1 2 33* 0* 11.3 1 .2 11.3 17 11.3 17

0:1 30 40* 60* 11.3 13. 11.3 17 11.3 1 .8

40:1 38* 0* 7 * 12.2 12.2 14.6 17.4 14 14

30 1/2:1 4 66* 8* 10.4 10.2 14.6 14.8 11.8 11.8

2 1/2:1 78* 118* .2 - 13.2 - 10. -

20 1/2:1 73 8* 146* 8 - 11.4 - .1 -

1 1/3:1 8 130 1 6* 6. - .3 - 7. -

12 1/3:1 122 162 243* .6 - 8 - 6.4 -

1/4:1 162 216 324* 4. - 6. - .2 -

PBL86-91LS/LSH

PBL86-91LS pictured


SPEED

2 - 324 rpmVOLTAGE 48V DCWEIGHT 3.3 kgCONTROLLER BSHAFT TYPE Single ended as standard; hollow or double ended upon



35/68

3


PBL86-118LS/LSH

Ratio




1500 rpm173 W

2000 rpm230 W


60:1 2 33* 0* 11.3 17 11.3 17 11.3 17

0:1 30 40* 60* 11.3 17 11.3 17 11.3 17

40:1 38* 0* 7 * 14.6 1 .2 14.6 22 14.6 22

30 1/2:1 4 * 66* 8* 14.6 16.3 14.6 22 14.6 22

2 1/2:1 * 78* 118* 14. 14. 14.6 22 14.6 1 .8

20 1/2:1 73* 8* 146* 12. 12. 14.6 22 14.6 17.1

1 1/3:1 8* 130* 1 6* 10.3 10.3 14.6 21 14 14

12 1/3:1 122* 162* 243* 8.8 8.8 14.6 17.6 12 12

1/4:1 162 216* 324* 7.1 - 14.2 - .7 -




SPEED

2 - 324 rpmVOLTAGE 48V DCWEIGHT 4.3 kgCONTROLLER 0BSHAFT TYPE Single ended as standard; hollow or double ended upon



36/68

36


PBL86-91G/GH

Ratio




1500 rpm110 W

2000 rpm147 W

3000 rpm220 W

Composite Composite Composite

7 :1 20 27 40 2 42 34

60:1 2 33 0 24 3 28

0:1 30 40 60 21 31 24

30:1 0 67100

13. 1 .8 1 .8

2 :1 60 80 120 12.1 17.3 13.8

12 1/2:1 120 160 240 6.6 .4 7.

PBL86-91G pictured

MOTOR Brushless DC motorPROTECTION IP 4 (IP 0 at exposed rear motor shaft)GEARBOX Worm and wheel (G)MOTOR POWER 110 - 220 Watts

SPEED

20 - 240 rpmVOLTAGE 48V DCWEIGHT 4. kgCONTROLLER BSHAFT TYPE Single ended as standard; hollow or double ended upon



37/68

37


PBL86-118G/GH

Ratio




1500 rpm173 Watts

2000 rpm230 Watts

3000 rpm346 Watts


7 :1 20 27* 40* 46 0 0

60:1 2 33 0* 38 0 0

0:1 30 40 60* 34 0 46

30:1 0 67 100* 2244

30

2 :1 60 80 120* 1 38 26

12 1/2:1 120 160 240 10.3 21 14.1


PBL86-118G pictured


SPEED

20 - 240 rpmVOLTAGE 48V DCWEIGHT . kgCONTROLLER 0BSHAFT TYPE Single ended as standard; hollow or double ended upon



38/68

38


PBL86-145G/GH

Ratio




1500 rpm220 W

2000 rpm293 W

3000 rpm440 W


7 :1 20 27* 40* 0 0 0

60:1 2 33* 0* 4 0 0

0:1 30 40* 60* 43 0 0

30:1 0 67* 100* 28 0 42

2 :1 60 80 120* 24 48 36

12 1/2:1 120 160 240* 13.1 26 1 .7


PBL86-145G pictured


SPEED

20 - 240 rpmVOLTAGE 48V DCWEIGHT 6. kgCONTROLLER 0BSHAFT TYPE Single ended as standard; hollow or double ended upon



39/68

3


PBL60-78SIW





1500 rpm17 W

2000 rpm23 W

3000 rpm35 W


4:1 2 :1 1.1 1. 2.2 3 7 11.3 7 11.3 7 11.3

27:1 2 :1 2.2 3 4.4 . 7 11.3 7 11.3 7 11.3

14 1/2:1 2 :1 4.1 . 8.3 11 7 11.3 7 11.3 7 11.3

8 1/3:1 2 :1 7.2 .6 14.4 1 .2 7 8.6 7 11.3 7 10.

16 1/2:1 8 1/3:1 10. 14. 22 2 6. 6. 7 11.3 7 8.2

12 1/2:1 8 1/3:1 14.4 1 .2 2 38 .3 .3 7 10.6 6.8 6.8

10 1/3:1 8 1/3:1 17.4 23 3 46 4.6 4.6 7 .2 . .

1/3:1 8 1/3:1 1 .3 26 3 1 4.3 4.3 7 8.6 . .

8 1/3:1 8 1/3:1 22 2 43 8 3. 3. 7 7.

7 1/4:1 8 1/3:1 2 33 0 66 3. 3. 7 7.1 4. 4.

6 1/4:1 8 1/3:1 2 38 8 77 3.2 - 6.3 - 4 -

6 1/4:1 6 1/4:1 38 1 77 102 2. - .1 - 3.2 -

4 HOLES EACH SIDE EQUI SPACED

ON A 41.3mm P.C.D. CAST 3.8mmSUITABLE FOR 8-32 TAPTITE SCREWS.CAN BE TAPPED M5 x 6mm DEEPON REQUEST

MOTOR Brushless DC motorPROTECTION IP 4 (IP 0 at exposed rear motor shaft)GEARBOX In-line worm (SIW)MOTOR POWER 17 - 46 Watts

SPEED

1.1 - 102 rpmVOLTAGE 24V DCWEIGHT 1.7 kgCONTROLLER NSHAFT TYPE Single ended shaftEXTRAS See page 18


40/68

40


PBL60-98(IE)SIW





1500 rpm35 W

2000 rpm46 W

3000 rpm69 W


4:1 2 :1 1.1 1. 2.2 3 7 11.3 7 11.3 7 11.3

27:1 2 :1 2.2 3 4.4 . 7 11.3 7 11.3 7 11.3

14 1/2:1 2 :1 4.1 . 8.3 11 7 11.3 7 11.3 7 11.3

8 1/3:1 2 :1 7.2 .6 14.4 1 .2 7 11.3 7 11.3 7 11.3

16 1/2:1 8 1/3:1 10. 14. 22 2 7 11.3 7 11.3 7 11.3

12 1/2:1 8 1/3:1 14.4 1 .2 2 38 7 10.6 7 11.3 7 11.3

10 1/3:1 8 1/3:1 17.4 23 3 46 7 .2 7 11.3 7 11.3

1/3:1 8 1/3:1 1 .3 26 3 1 7 8.6 7 11.3 7 10.

8 1/3:1 8 1/3:1 22 2 43 8 7 7. 7 11.3 7 10

7 1/4:1 8 1/3:1 2 33 0 66 7 7.1 7 11.3 7

6 1/4:1 8 1/3:1 2 38 8 77 6.3 6.3 7 11.3 7 8.1

6 1/4:1 6 1/4:1 38 1 77 102 .1 .1 7 10.2 6. 6.



MOTOR Brushless DC motorPROTECTION IP 4 (IP 0 at exposed rear motor shaft)GEARBOX In-line worm (SIW)MOTOR POWER 3 - 2 Watts

SPEED

1.1 - 102 rpmVOLTAGE 24V DCWEIGHT 2.0 kgCONTROLLER N (or integral with IE model)SHAFT TYPE Single ended shaftEXTRAS See page 18

PBL60-98SIW pictured


41/68

41


PBL60-118(IE)SIW





1500 rpm50 W

2000 rpm67 W

3000 rpm101 W


4:1 2 :1 1.1 1. 2.2 3 7 11.3 7 11.3 7 11.3

27:1 2 :1 2.2 3 4.4 . 7 11.3 7 11.3 7 11.3

14 1/2:1 2 :1 4.1 . 8.3 11 7 11.3 7 11.3 7 11.3

8 1/3:1 2 :1 7.2 .6 14.4 1 .2 7 11.3 7 11.3 7 11.3

16 1/2:1 8 1/3:1 10. 14. 22 2 7 11.3 7 11.3 7 11.3

12 1/2:1 8 1/3:1 14.4 1 .2 2 38 7 11.3 7 11.3 7 11.3

10 1/3:1 8 1/3:1 17.4 23 3 46 7 11.3 7 11.3 7 11.3

1/3:1 8 1/3:1 1 .3 26 3 1 7 11.3 7 11.3 7 11.3

8 1/3:1 8 1/3:1 22 2 43 8 7 11.3 7 11.3 7 11.3

7 1/4:1 8 1/3:1 2 33 0 66 7 10.3 7 11.3 7 11.3

6 1/4:1 8 1/3:1 2 38 8 77 7 .2 7 11.3 7 11.3

6 1/4:1 6 1/4:1 38 1 77 102 7 7.4 7 11.3 7 .3



MOTOR Brushless DC motorPROTECTION IP 4 (IP 0 at exposed rear motor shaft)GEARBOX IN-line worm (SIW)MOTOR POWER 0 - 134 Watts

SPEED

1.1 - 102 rpmVOLTAGE 24V DCWEIGHT 2.3 kgCONTROLLER B (or integral with IE model)SHAFT TYPE Single ended shaftEXTRAS See page 18

PBL60-118SIW pictured


42/68

42


PBL60-78MIW





1500 rpm17 W

2000 rpm23 W

3000 rpm35 W


4:1 2 :1 1.1 1. 2.2 3 17 28 17 28 17 28

27:1 2 :1 2.2 3 4.4 . 17 1 .6 17 28 17 2

14 1/2:1 2 :1 4.1 . 8.3 11 12.8 12.8 17 26 16.3 16.3

8 1/3:1 2 :1 7.2 .6 14.4 1 .2 8.6 8.6 17 17.1 10. 10.

16 1/2:1 8 1/3:1 10. 14. 22 2 6. - 12. - 8.2 -

12 1/2:1 8 1/3:1 14.4 1 .2 2 38 .3 - 10.6 - 6.8 -

10 1/3:1 8 1/3:1 17.4 23 3 46 4.6 - .2 - . -

1/3:1 8 1/3:1 1 .3 26 3 1 4.3 - 8.6 - . -

8 1/3:1 8 1/3:1 22 2 43 8 3. - 7. - -

7 1/4:1 8 1/3:1 2 33 0 66 3. - 7.1 - 4. -

6 1/4:1 8 1/3:1 2 38 8 77 3.2 - 6.3 - 4 -


MOTOR Brushless DC motorPROTECTION IP 4 (IP 0 at exposed rear motor shaft)GEARBOX In-line worm (MIW)MOTOR POWER 17 - 46 Watts

SPEED

1.1 - 77 rpmVOLTAGE 24V DCWEIGHT 2. kgCONTROLLER NSHAFT TYPE Single ended shaftEXTRAS See page 18


43/68

43


PBL60-98(IE)MIW





1500 rpm35 W

2000 rpm46 W

3000 rpm69 W


4:1 2 :1 1.1 1. 2.2 3 17 28 17 28 17 28

27:1 2 :1 2.2 3 4.4 . 17 28 17 28 17 28

14 1/2:1 2 :1 4.1 . 8.3 11 17 26 17 28 17 28

8 1/3:1 2 :1 7.2 .6 14.4 1 .2 17 17.1 17 28 17 22

16 1/2:1 8 1/3:1 10. 14. 22 2 12. 12. 17 26 16. 16.

12 1/2:1 8 1/3:1 14.4 1 .2 2 38 10. 6 10. 6 17 21 13. 13.

10 1/3:1 8 1/3:1 17.4 23 3 46 .2 .2 17 18. 11.8 11.8

1/3:1 8 1/3:1 1 .3 26 3 1 8.6 8.6 17 17.2 10. 10.

8 1/3:1 8 1/3:1 22 2 43 8 7. - 1 .8 - 10 -

7 1/4:1 8 1/3:1 2 33 0 66 7.1 - 14.2 - -

6 1/4:1 8 1/3:1 2 38 8 77 6.3 - 12.7 - 8.1 -



SPEED

1.1 - 77 rpmVOLTAGE 24V DCWEIGHT 2.8 kgCONTROLLER N (or integral with IE model)SHAFT TYPE Single ended shaftEXTRAS See page 18

PBL60-98MIW pictured


44/68

44


PBL60-118(IE)MIW





1500 rpm50 W

2000 rpm67 W

3000 rpm101 W


4:1 2 :1 1.1 1. 2.2 3 17 28 17 28 17 28

27:1 2 :1 2.2 3 4.4 . 17 28 17 28 17 28

14 1/2:1 2 :1 4.1 . 8.3 11 17 28 17 28 17 28

8 1/3:1 2 :1 7.2 .6 14.4 1 .2 17 2 17 28 17 28

16 1/2:1 8 1/3:1 10. 14. 22 2 17 18.8 17 28 17 24

12 1/2:1 8 1/3:1 14.4 1 .2 2 38 1 . 1 . 17 28 17 1 .3

10 1/3:1 8 1/3:1 17.4 23 3 46 13. 13. 17 27 16.8 16.8

1/3:1 8 1/3:1 1 .3 26 3 1 12. 12. 17 2 1 .6 1 .6

8 1/3:1 8 1/3:1 22 2 43 8 11. 11. 17 23 14.3 14.3

7 1/4:1 8 1/3:1 2 33 0 66 10.3 10.3 17 21 12. 12.

6 1/4:1 8 1/3:1 2 38 8 77 .2 .2 17 18.4 11. 11.



SPEED

1.1 - 77 rpmVOLTAGE 24V DCWEIGHT 3.1 kgCONTROLLER B (or integral with IE model)SHAFT TYPE Single ended shaftEXTRAS See page 18

PBL60-118MIW pictured


45/68

4


PBL60-138(IE)MIW





1500 rpm69 W

2000 rpm92 W

3000 rpm138 W


4:1 2 :1 1.1 1. 2.2 3 17 28 17 28 17 28

27:1 2 :1 2.2 3 4.4 . 17 28 17 28 17 28

14 1/2:1 2 :1 4.1 . 8.3 11 17 28 17 28 17 28

8 1/3:1 2 :1 7.2 .6 14.4 1 .2 17 28 17 28 17 28

16 1/2:1 8 1/3:1 10. 14. 22 2 17 26 17 28 17 28

12 1/2:1 8 1/3:1 14.4 1 .2 2 38 17 21 17 28 17 27

10 1/3:1 8 1/3:1 17.4 23 3 46 17 18. 17 28 17 23

1/3:1 8 1/3:1 1 .3 26 3 1 17 17.2 17 28 17 21

8 1/3:1 8 1/3:1 22 2 43 8 1 .8 1 .8 17 28 17 1 .7

7 1/4:1 8 1/3:1 2 33 0 66 14.2 14.2 17 28 17 17.7

6 1/4:1 8 1/3:1 2 38 8 77 12.7 12.7 17 2 1 .8 1 .8



SPEED

1.1 - 77 rpmVOLTAGE 24V DC (or 48V DC with IE model)WEIGHT 3.4 kgCONTROLLER B (or integral with IE model)SHAFT TYPE Single ended shaftEXTRAS See page 18


46/68

46


PBL42-47SWS

Ratio Final speed (rpm)Rated torque Nmup to 4000 rpm



Worm Spur 1500 rpm10 W 2000 rpm13 W 3000 rpm20 W 4000 rpm26 W

44:1 31.3:1 1.1 1. 2.2 2. 11 11 11

22 1/2:1 31.3:1 2.1 2.8 4.3 .7 11 11 11

12 1/2:1 31.3:1 3.8 .1 7.7 10.2 11 11 11

1/3:1 31.3:1 .1 6.8 10.3 13.7 11 11 11

1/3:1 23. :1 6.8 .1 13.7 18.2 8. 11 10.6

6 1/4:1 23. :1 10.2 13.6 20 27 6.3 11 7.

12 1/2:1 .6:1 12. 16.7 2 33 4. .6

1/3:1 .6:1 16.7 22 33 4 3.6 7.3 4.

MOTOR Brushless DC motorPROTECTION IP 4 (IP 0 at exposed rear motor shaft)GEARBOX Worm spur (SWS)MOTOR POWER 10 - 26 Watts

SPEED

1.1 - 67 rpmVOLTAGE 24V DCWEIGHT 1.2 kgCONTROLLER SSHAFT TYPE Single ended or double ended shaft as standardEXTRAS See page 18


47/68

47


PBL42-67(IE)SWS





44:1 31.3:1 1.1 1. 2.2 2. 11 11 11

22 1/2:1 31.3:1 2.1 2.8 4.3 .7 11 11 11

12 1/2:1 31.3:1 3.8 .1 7.7 10.2 11 11 11

1/3:1 31.3:1 .1 6.8 10.3 13.7 11 11 11

1/3:1 23. :1 6.8 .1 13.7 18.2 11 11 11

6 1/4:1 23. :1 10.2 13.6 20 27 11 11 11

12 1/2:1 .6:1 12. 16.7 2 33 11 11

1/3:1 .6:1 16.7 22 33 4 7.3 11 .3

MOTOR Brushless DC motorPROTECTION IP 4 (IP 0 at exposed rear motor shaft)GEARBOX Worm spur (SWS)MOTOR POWER 20 - 2 WAtts

SPEED 1.1 - 67 rpmVOLTAGE 24V DCWEIGHT 1.4 kgCONTROLLER S (or integral with IE model)SHAFT TYPE Single ended or double ended shaft as standardEXTRAS See page 18


48/68

48


PBL60-78MWS




Worm Spur1500 rpm

17 W2000 rpm

23 W3000 rpm

35 W4000 rpm

46 W40:1 3 .3 :1 1.1 1.4 2.1 2.8 4 4 4

27:1 3 .3 :1 1.6 2.1 3.1 4.2 4 4 4

18 1/2:1 3 .3 :1 2.3 3.1 4.6 6.1 37 4 4

12 1/2:1 3 .3 :1 3.4 4. 6.8 28 4 36

1/3:1 3 .3 :1 4. 6.1 .1 12.1 23 4 2

7 1/4:1 3 .3 :1 .8 7.8 11.7 1 .6 18. 38 24

8 1/3:1 1 .1:1 11. 1 . 24 32 .2 18. 11.8

7 1/4:1 1 .1:1 13.7 18.3 27 37 8.3 16.7 10.66 1/4:1 1 .1:1 1 . 21 32 42 7.4 14. .

8 1/3:1 6. :1 28 37 74 4.1 8.1 .2

7 1/4:1 6. :1 32 42 64 8 3.7 7.3 4.7

6 1/4:1 6. :1 37 4 74 8 3.3 6. 4.2

MOTOR Brushless DC motorPROTECTION IP 4 (IP 0 at exposed rear motor shaft)GEARBOX Worm spur (MWS)MOTOR POWER 17 - 46 Watts

SPEED

1.1 - 8 rpmVOLTAGE 24V DCWEIGHT 3. kgCONTROLLER NSHAFT TYPE Single ended or double ended shaft as standardEXTRAS See page 18


49/68

4


PBL60-98(IE)MWS




Worm Spur1500 rpm

35 W2000 rpm

46 W3000 rpm

69 W4000 rpm

92 W40:1 3 .3 :1 1.1 1.4 2.1 2.8 4 4 4

27:1 3 .3 :1 1.6 2.1 3.1 4.2 4 4 4

18 1/2:1 3 .3 :1 2.3 3.1 4.6 6.1 4 4 4

12 1/2:1 3 .3 :1 3.4 4. 6.8 4 4 4

1/3:1 3 .3 :1 4. 6.1 .1 12.1 4 4 4

7 1/4:1 3 .3 :1 .8 7.8 11.7 1 .6 38 4 4

8 1/3:1 1 .1:1 11. 1 . 24 32 18. 22 22

7 1/4:1 1 .1:1 13.7 18.3 27 37 16.7 22 216 1/4:1 1 .1:1 1 . 21 32 42 14. 22 18.

8 1/3:1 6. :1 28 37 74 8.1

7 1/4:1 6. :1 32 42 64 8 7.3

6 1/4:1 6. :1 37 4 74 8 6. 8.3


SPEED

1.1 - 8 rpmVOLTAGE 24V DCWEIGHT 3.8 kgCONTROLLER N (or integral with IE model)SHAFT TYPE Single ended or double ended shaft as standardEXTRAS See page 18

PBL60-98MWS pictured


50/68

0


PBL60-118(IE)MWS




Worm Spur1500 rpm

50 W2000 rpm

67 W3000 rpm

101 W4000 rpm

134 W

40:1 3 .3 :1 1.1 1.4 2.1 2.8 4 4 4

27:1 3 .3 :1 1.6 2.1 3.1 4.2 4 4 4

18 1/2:1 3 .3 :1 2.3 3.1 4.6 6.1 4 4 4

12 1/2:1 3 .3 :1 3.4 4. 6.8 4 4 4

1/3:1 3 .3 :1 4. 6.1 .1 12.1 4 4 4

7 1/4:1 3 .3 :1 .8 7.8 11.7 1 .6 4 4 4

8 1/3:1 1 .1:1 11. 1 . 24 32 22 22 22

7 1/4:1 1 .1:1 13.7 18.3 27 37 22 22 22

6 1/4:1 1 .1:1 1 . 21 32 42 22 22 22

8 1/3:1 6. :1 28 37 74

7 1/4:1 6. :1 32 42 64 8

6 1/4:1 6. :1 37 4 74 8


SPEED

1.1 - 8 rpmVOLTAGE 24V DCWEIGHT 4.1 kgCONTROLLER B (or integral with IE model)SHAFT TYPE Single ended or double ended shaft as standardEXTRAS See page 18

PBL60-118MWS pictured


51/68

1


PBL60-78LWS




Worm Spur1500 rpm

17 W2000 rpm

23 W3000 rpm

35 W4000 rpm

46 W

16 1/2:1 11 :1 0.8 1.1 1.6 2.1 100 100 100

8 1/3:1 11 :1 1.6 2.1 3.1 4.2 64 100 82

12 1/2:1 6:1 2.1 2. 4.3 .7 42 84 4

8 1/3:1 6:1 3.2 4.3 6.4 8.6 31 63 40

6 1/4:1 6:1 4.3 .7 8.6 11.4 2 0 32

12 1/2:1 2 :1 4.8 6.4 .6 12.8 18. 38 24

8 1/3:1 2 :1 7.2 .6 14.4 1 .2 14 28 17.8

6 1/4:1 2 :1 .6 12.8 1 .2 26 11.3 23 14.3

16 1/2:1 6:1 1 .2 20 30 40 . 11 7

8 1/3:1 6:1 30 40 60 80 3.4 6.7 4.3

MOTOR Brushless DC motorPROTECTION IP 4 (IP 0 at exposed rear motor shaft)GEARBOX Worm spur (LWS)MOTOR POWER 14 - 46 Watts

SPEED

0.8 - 80 rpmVOLTAGE 24V DCWEIGHT 4.6 kgCONTROLLER NSHAFT TYPE Single ended or double ended shaft as standard; 17mm

diameter shaft available with ratios 11 :1 and 6:1EXTRAS Gearbox available without feet; unit can be mounted

on gearbox spigot; for further options see page 18


52/68

2


PBL60-98(IE)LWS




Worm Spur1500 rpm

35 W2000 rpm

46 W3000 rpm

69 W4000 rpm

92 W

16 1/2:1 11 :1 0.8 1.1 1.6 2.1 100 100 100

8 1/3:1 11 :1 1.6 2.1 3.1 4.2 100 100 100

12 1/2:1 6:1 2.1 2. 4.3 .7 84 100 100

8 1/3:1 6:1 3.2 4.3 6.4 8.6 63 100 80

6 1/4:1 6:1 4.3 .7 8.6 11.4 0 100 64

12 1/2:1 2 :1 4.8 6.4 .6 12.8 38 62 48

8 1/3:1 2 :1 7.2 .6 14.4 1 .2 28 6 36

6 1/4:1 2 :1 .6 12.8 1 .2 26 23 4 2

16 1/2:1 6:1 1 .2 20 30 40 11 22 14

8 1/3:1 6:1 30 40 60 80 6.7 13.4 8.


SPEED

0.8 - 80 rpmVOLTAGE 24V DCWEIGHT 4. kgCONTROLLER N (or integral with IE model)SHAFT TYPE Single ended or double ended shaft as standard; 17mm


on gearbox spigot; for further options see page 18 PBL60-98LWS pictured


53/68

3


PBL60-118(IE)LWS




Worm Spur1500 rpm

50 W2000 rpm

67 W3000 rpm

101 W4000 rpm

134 W

16 1/2:1 11 :1 0.8 1.1 1.6 2.1 100 100 100

8 1/3:1 11 :1 1.6 2.1 3.1 4.2 100 100 100

12 1/2:1 6:1 2.1 2. 4.3 .7 100 100 100

8 1/3:1 6:1 3.2 4.3 6.4 8.6 1 100 100

6 1/4:1 6:1 4.3 .7 8.6 11.4 73 100 2

12 1/2:1 2 :1 4.8 6.4 .6 12.8 62 62

8 1/3:1 2 :1 7.2 .6 14.4 1 .2 41 62 1

6 1/4:1 2 :1 .6 12.8 1 .2 26 33 62 41

16 1/2:1 6:1 1 .2 20 30 40 16 32 20

8 1/3:1 6:1 30 40 60 80 .8 1 . 12.2


SPEED

0.8 - 80 rpmVOLTAGE 24V DCWEIGHT .2 kgCONTROLLER B (or integral with IE model)SHAFT TYPE Single ended or double ended shaft as standard; 17mm


on gearbox spigot; for further options see page 18 PBL60-118LWS pictured


54/68

4


PBL60-138(IE)LWS




Worm Spur1500 rpm

69 W2000 rpm

92 W3000 rpm

138 W4000 rpm

184 W

16 1/2:1 11 :1 0.8 1.1 1.6 2.1 100 100 100

8 1/3:1 11 :1 1.6 2.1 3.1 4.2 100 100 100

12 1/2:1 6:1 2.1 2. 4.3 .7 100 100 100

8 1/3:1 6:1 3.2 4.3 6.4 8.6 100 100 100

6 1/4:1 6:1 4.3 .7 8.6 11.4 100 100 100

12 1/2:1 2 :1 4.8 6.4 .6 12.8 62 62 62

8 1/3:1 2 :1 7.2 .6 14.4 1 .2 6 62 62

6 1/4:1 2 :1 .6 12.8 1 .2 26 4 62 6

16 1/2:1 6:1 1 .2 20 30 40 22 44 28

8 1/3:1 6:1 30 40 60 80 13.4 27 16.8


SPEED

0.8 -80 rpmVOLTAGE 24V DC (or 48V DC with IE model)WEIGHT . kgCONTROLLER B (or integral with IE model)SHAFT TYPE Single ended or double ended shaft as standard; 17mm


on gearbox spigot; for further options see page 18


55/68


PBL60-118(IE)GWS





30:1 110:1 0. 0.6 0. 1.2 2 0 2 0 2 0

16 1/2:1 110:1 0.8 1.1 1.7 2.2 2 0 2 0 2 0

1/3:1 110:1 1. 1. 2. 3. 1 2 0 244

7 1/4:1 110:1 1. 2. 3.8 161 2 0 202

7 1/4:1 7:1 3.6 4.8 7.3 .7 84 167 104

10 1/3:1 2 :1 .8 7.7 11.6 1 . 4 62

8 1/3:1 2 :1 7.2 .6 14.4 1 .2 42 84 3

12 1/3:1 11:1 11.1 14.7 22 2 26 2 32

8 1/3:1 11:1 16.4 22 33 44 1 .4 3 24

MOTOR Brushless DC motorPROTECTION IP 4 (IP 0 at exposed rear motor shaft)GEARBOX Worm spur (GWS)MOTOR POWER 0 - 134 Watts

SPEED

0. - 44 rpmVOLTAGE 24V DCWEIGHT 8.3 kgCONTROLLER B (or integral with IE model)SHAFT TYPE Single ended or double ended shaft as stand

Documents

Catalogues Motefcurs électriques