Overview Association pour le développement et la promotion ...ddata.over-blog.com/0/59/96/66/Newslaser/Newslaser32_EN.pdf09h20 Welcome and opening speech 09h40 LONDON IMPERIAL COLLEGE

French association of industrial laser users

Association pour le développement et la

promotion

des applications des lasers dans l’industrie

mailto:[email protected]

1

OverviewOverviewOverviewOverview• Page 1: Edito

• Page 2: Industrial Laser Processing Conference (JNPLI) (program,

registration…)

• Page 6: CLP’s members news : zoom on…

• Page 10: Calendar of laser events

• Page 12: Technological survey

• Page 14: CLP’s Benefactors members

Le journal des applications industrielles du laser

E-paper of industrial laser applications

September 2012

Newslaser n°32

Diffusion to 4400 qualified readers

CLUB LASER ET PROCEDES

Cleanspace, 354 voie Magellan

Parc d’Activités Alpespace

F/73800 SAINTE HELENE DU LAC

Tél. : +33(0)4 79 26 48 26

[email protected] - www.laserenligne.fr

Unsuscribe

Edito Edito Edito Edito

Dear readers,

This Newslaser presents the Industrial Laser Processing Conference (JNPLI):

� Conferences on the lastest developments in laser processing.

� Main topics : ADDITIVE MANUFACTURING, TRANSPORT and ENERGY,

MICROMACHINING.

� Invited speakers : Pr. Alain BERNARD from Ecole Centrale de Nantes and

AFRP, and Pr. Malcolm GOWER from Imperial London College and

Nanophoton Technologies

� Opportunities for networking and dinner at La Cité de l’Automobile

Information : [email protected] - +33(0)4 79 26 48 26.

Pascaline Touraine, Executive coordinator

Newslaser is CLP’s e-paper :

• Promotion of both laser technology and

members’products & services: annual

conference on laser processing,

common booth at trade fairs,

application notes, technical press

releases

• Networking and business development,

cross-linking between end-users &

subcontractors

• Support for shows & conferences

• Dedicated website

(events’announcement, showcase and

unique entry point for technical

requests)

• Newslaser

• Business directory

• Connection to French Photonics and to

other national laser clusters

French association of industrial laser users

Renseignements et inscriptions

JNPLI 2012

Tél : 04 79 26 48 26

[email protected]

2



Partenaires Partners

INDUSTRIAL LASER PROCESSING CONFERENCE (JNPLI)INDUSTRIAL LASER PROCESSING CONFERENCE (JNPLI)INDUSTRIAL LASER PROCESSING CONFERENCE (JNPLI)INDUSTRIAL LASER PROCESSING CONFERENCE (JNPLI)28 28 28 28 & 29 novembre & 29 novembre & 29 novembre & 29 novembre 2012, Parc 2012, Parc 2012, Parc 2012, Parc expo expo expo expo Mulhouse, FranceMulhouse, FranceMulhouse, FranceMulhouse, France

The Industrial Laser Processing Conference (JNPLI) offers an overview of the latest innovations and recently

implemented applications in this field. The conferences program contains thematic sessions and a few opportunities

for networking.

The 2012 JNPLI conference will occure on 28th and 29th November at the Mulhouse Exhibition Centre. For the first

time, this event is organized in parallel with an industrial trade fair: Espace Laser. The aim is to combine the attraction

of the two events to create synergy and so attract a larger number of visitors. This will be a unique opportunity to

combine technical intelligence with a visit to this exhibition dedicated to new manufacturing techniques.

Topics :

Conferences will be presented with simultaneous translation.

T E C H N O L O G I C A L I N N O V A T I O N S

A D D I T I V E M A N U F A C T U R I N G

E N E R G Y A N D T R A N S P O R T S

M I C R O M A C H I N I N G



WEDNESDAY 28th, NOVEMBER

09h00 Registration, Network coffee

09h20 Welcome and opening speech

09h40LONDON IMPERIAL COLLEGE

Malcolm GOWERA short history of laser

10h20AILU Association of Industrial laser

users / Michael GREENStrategy for laser materials processing

TECHNOLOGICAL INNOVATIONS

10h40TEEM PHOTONICS

Florent THIBAULT

Sub-ns microchip lasers technology: overview and progress in health science and

industrial applications

11h00 Network coffee

11h30FRONIUS INTERNATIONAL

Matthias MICHLLaser hybrid welding for industrial applications

11h50ISP SYSTEM

Paul SAUVAGEOTSucceed your brazing or nano-sintering industrialization without risk

12h10ABC VISION INDUSTRIELLE

Eric SABARDEILMeasurement and shape control on production line

12h30 Lunch

ADDITIVE MANUFACTURING

14h00ECOLE CENTRALE NANTES

Alain BERNARD

State of the art of additive manufacturing

Standards : UNM 920 committee « Additive manufacturing », works of international

standardization ISO committee, cooperation with the US-ASTM

14h40RENISHAW PLC

Robin WESTONDesign for additive manufacturing – Challenges & opportunities

15h00 SIRRIS

Olivier RIGO

Lightened metal parts production by additive manufacturing processes such as

Selective Laser Melting

15h20 BELGIAN CERAMIC RESEARCH

CENTRE / Fabrice PETIT

New laser process for ceramic complex shapes parts manufacturing: an alternative to

micro-milling

15h403A Applications Additives Avancées

Philippe VANNEROT

High precision digital laser applied to geometrical and dimensional parts

measurement


16h30 IREPA LASER / Didier BOISSELIERImplementation of tubular parts additive manufacturing by 5-axis configuration CLAD

process. Application examples

16h50 BEAM / Emmanuel LAUBRIAT -

17h10 LERMPS / Lucas DEMBENSKI -

17h30 - -

18h00 End of day 1

18h50 Gathering at the Cité de l’Automobile

19h00 Evening reception : visit of the Schlumpf collection and dinnerTh

is p

rog

ram

co

uld

be

up

da

ted

JNPLI’S PROVISIONAL PROGRAMJNPLI’S PROVISIONAL PROGRAMJNPLI’S PROVISIONAL PROGRAMJNPLI’S PROVISIONAL PROGRAM



JNPLI’S PROVISIONAL PROGRAMJNPLI’S PROVISIONAL PROGRAMJNPLI’S PROVISIONAL PROGRAMJNPLI’S PROVISIONAL PROGRAMTHURSDAY 29th, NOVEMBER

08h30 Registration, Network coffee

ENERGY AND TRANSPORTS

08h50AREVA

François LECONTE

Evaluation of the realization of master root passes on strong thickness with laser

hybrid welding process

09h10AIMEN

Eva VAAMONDE COUSO

Laser induced selective removal of paint and coatings for shipbuilding and ship

maintenance applications

09h30ROFIN BAASEL France

Laurent MENUATUse of fiber lasers for gearbox elements welding

09h50SAFEL

Michel NORMANDONLaser or electron beam – Point of view’s subcontractor

10h10TRUMPF

Gilles CAQUOTIndustry management automotive application: Hotforming


11h00IREPA LASER

Pierre-Alain VETTERNew developments in laser thermoplastics welding

11h20 TREFFERT / Anne-Lise DURIER Colorants and additives for laser welding

11h40WELIENCE

Simone MATTEILaser/MIG-MAG hybrid processes numerical calculation

12h00CLFA FRAUNHOFER ILT

Wolfgang KNAPPLaser surface modification for multi-material assembly

12h20 Lunch

MICROMACHINING

14h00AMPLITUDES SYSTEMES

Eric MOTTAYUltrafast lasers in medical applications

14h20

IS2M Institut de Science des

Matériaux de Mulhouse

Arnaud SPANGENBERG

Photochemical approaches for micro and nanofabrication. Example of 3D high

resolution microfabrication

14h40ALPHANOV

Charly LOUMENAPotential applications of lasers for carbon/epoxy composites machining

15h00LASEA France

Paul-Etienne MARTINFemtosecond laser micromachining in the watch-making sector

15h20FRAUNHOFER ILT

Christian FORNAROLILaser-beam helical drilling of high quality micro holes


16h10 QIOVA

Benjamin DUSSERUse innovative optic/vision modules for anti-counterfeiting laser marking

16h30 IMPULSION / Hervé SODER Femtoseconde laser processes

16h50LASER CHEVAL

Dominique CILIA

Production of precision markings associated to a vision system for luxury and watch-

making sectors

17h10ALPHANOV

John LOPEZ

From microscale to nanoscale processing: examples of surface texturing and of

nanoparticles generation

17h35 End of day 2, closing remarks

Th

is p

rog

ram

co

uld

be

up

da

ted

5



INDUSTRIAL LASER PROCESSING CONFERENCE (JNPLI)INDUSTRIAL LASER PROCESSING CONFERENCE (JNPLI)INDUSTRIAL LASER PROCESSING CONFERENCE (JNPLI)INDUSTRIAL LASER PROCESSING CONFERENCE (JNPLI)

SAMESAMESAMESAME DATE,DATE,DATE,DATE, SAMESAMESAMESAME PLACEPLACEPLACEPLACE :::: ESPACEESPACEESPACEESPACE LASERLASERLASERLASER EXHIBITIONEXHIBITIONEXHIBITIONEXHIBITION

In addition to industrial laser processes like cutting, welding, marking and machining, Espace Laser 2012 trade fair

will include additive manufacturing, design, metrology and control.

These new techniques open new doors for companies to make better. Every stage of production for a product will

be represented at the trade fair, from design to associated finishing operations as well as manufacturing and

identification.

JNPLI’12 ADVERTISERSJNPLI’12 ADVERTISERSJNPLI’12 ADVERTISERSJNPLI’12 ADVERTISERSREGISTRATIONREGISTRATIONREGISTRATIONREGISTRATION

Download the registration form here.

Information:

[email protected] - +33(0)4 79 26 48 26

http://www.laserenligne.fr/competences/bullier-automation.html

http://www.laserenligne.fr/competences/alphanov.html

6



MEMBERS NEWS, ZOOM ON…MEMBERS NEWS, ZOOM ON…MEMBERS NEWS, ZOOM ON…MEMBERS NEWS, ZOOM ON…

………… ALPHANOVALPHANOVALPHANOVALPHANOV

ALPhANOV specializes in the prototyping of nanoparticles in liquid by laser ablation

ALPhANOV created for the first time to our knowledge upconverting phosphor nanoparticules via PLAL. The infrared-

to-visible upconversion materials hold strong potential for fluorescent labeling and bio-marking.

Image legend: Liquid solution of up-converting phosphor nanoparticules: they exhibit visible emission when excited by an infrared laser. Credit:

ALPhANOV

More

Contact : Arnaud ZOUBIR, Tel : +33(0)5 40 00 64 10, [email protected]

Nanoparticles have attracted much attention due to their unique properties, for

fundamental research but also for industrial applications. A significant number of methods

have been proposed for the synthesis of nanoparticles: most of these methods rely on

chemical synthesis.

Another synthesis method that is gaining ground for NP production is pulsed laser ablation

in liquids (PLAL). This method relies on a top-down process whereby the laser is used to

fragment a solid substrate of macroscopic size down to nano-sized objects. This method has

been reported to produce stable NPs in various solutions without the need for additional

chemicals, making them more compatible with biomedical applications. Another advantage

of PLAL lies in its simplicity. Furthermore, PLAL can be implemented to produce NPs of

different nature and from different materials with more or less the same protocol.

………… BULLIERBULLIERBULLIERBULLIER AUTOMATIONAUTOMATIONAUTOMATIONAUTOMATION

New in september 2012 : protective shield

We would like to introduce to you the new protective shield curtain YLC-2. The YLC-2 is soft, flexible and transparent,

(red), so it is very easy to cut according to the required size and you can see through it. The laser curtain YLC-2 is

slightly adhesive. You can easily place the laser curtain onto a transparent panel, glass or plexiglass window and then

push out any air bubbles which may exist between the curtain and the panel to maximize the performance of the

product.

Photos : New YLC-2 protective shield and view for comparing the size between YL600 standart shield (33 cm, in white) and YLC-2 new shield (1 m,

in red)

More

Contact : Benoît BULLIER, Tel : +33(0)1 46 95 09 09, [email protected]

Référence Couleur T (%) dans

le visible

Longueur

d’onde (nm)

Densité

optique

YLC-2Clear

orange30%

441 - 488

514,5 - 5323<

Screen YLC-2

Screen YL600

http://www.laserenligne.fr/competences/laser-cheval.html

http://www.laserenligne.fr/competences/gm-prod.html

7




………… GMGMGMGM PRODPRODPRODPROD

Leading company for metal powders additive manufacturing

More

Contact : Bernard PELLETIER, Tel : +33(0)3 85 31 18 10, [email protected]

GM Prod is a leading company for the production of micro-parts by additive manufacturing of

metal powders. This technology offers an alternative solution when traditional manufacturing

can no longer respond to the economic product development. It allows to product a direct part

from its 3D digital representation by stacking successive layers of metal powders. At each pass, a

laser beam is merged sections previously defined by CAD. This technology is suitable for

producing functional prototypes but also the series production of complex shape. Many

companies in the medical, aerospace, military, tooling, watches fields have already taken benefit

from advantages offered by this technology.

………… LASERLASERLASERLASER CHEVALCHEVALCHEVALCHEVAL

New : the LEW, a micro-machine for laser micro-welding

La précision du point de soudure est obtenue grâce à l’intégration d’un système de visée par caméra qui permet le

positionnement et le contrôle des pièces (même microscopiques) ainsi que la visualisation du travail et de la soudure

à réaliser.

More

Contact : David FARGETTE, Tel : +33(0)3 81 48 34 66, [email protected]

Laser Cheval vient de concevoir un poste ergonomique très compact qui

fonctionne aussi bien en mode pulsé 150 W qu’en mode continu 250 W, avec

une puissance crête de 1.5 kW. Le LEW complète ainsi sa gamme de

machines laser YAG. Il répond parfaitement à des besoins d’assemblage de

pièces de très petites dimensions avec une vitesse de soudage et une qualité

du cordon de soudure inégalables.

Les têtes de déviation galvanométriques qui équipent la machine permettent

à l’utilisateur d’usiner une pièce en un temps record avec des avantages

indéniables en terme de productivité, de finesse du cordon de soudure,

d’absence d’apport de matière et d’une tenue de pièce optimale. Avec une

alimentation en gaz automatique, le soudage peut se faire par point ou

suivant un cordon géré par CNC.

http://www.laserenligne.fr/competences/prc-laser-europe.html

8




………… PRCPRCPRCPRC LASERLASERLASERLASER EUROPEEUROPEEUROPEEUROPE

Innovation : the most economical fast axial flow CO2 laser !

In the GL 1000/1500 and 2000 W version, PRC offers the smallest 2 kW CO2 laser in the world ! In the medium

power range PLS 2500/3000/3300 and the PLS 4000, the most compact low cost 4 kW laser. The high power series

CH 5000/6000 and FH 7000/8000 W have been developed for cutting thick materials.

More

Contact : Guy BAUWENS, Tel. : +32 / 55 30 31 96, [email protected]

………… QIOVAQIOVAQIOVAQIOVA

QiOVA : Innovation in laser marking

� Fast and direct marking of unique non-reproducible structures,

� Flash marking of real-time controlled complex shapes (fig.1),

� Large area texturation (over 1cm2), color marking and diffractive effects on metals (fig.2), etc.

Fig.1 : laser marking using surface structures on stainless steel

Fig.2 : one shot « flash » laser marking on metalized paper shaped as a QR-code (400µm)

Contact : Benjamin DUSSER, Tel. : +33(2)6 88 30 48 48, [email protected]

Fig. 1

Fig. 2

Start-up specialized in lasers, industrial optics and traceability QiOVA relies on its expertise in

light/matter interaction to develop new ultrafast and high precision laser marking tools for

many different materials (metals, polymers, leather, glass, etc.) in many different industrial

applications. Compatible with most existing laser systems, those tools provide useful

capabilities such as :

This technology as been selected for “La Vitrine de

l’innovation” (23th to 25th October 2012), a challenge

annually organised during the OPTO fair and focused on

French R&D teams innovations.

PRC has released his new range of low cost and minimum maintenance CO2 laser

sources : electrical consumption is 50 % lower compared to other CO2 lasers ! The

new Gas Enhancement Module (GEM) reduces gas consumption with 60 to 80 %.

Further, PRC’s laser technology in general (resonator, cavity, electronical control, … )

has been improved to further reduce the maintenance and operating costs to a strict

minimum !

All PRC lasers can be easily integrated and embarked onto any kind of OEM-machine for

cutting, welding and surface treatment , thus allowing easy designing of very flexible and

big sized machines.

http://www.laserenligne.fr/competences/treffert-sas.html

http://www.laserenligne.fr/competences/rofin-baasel-france.html

9




………… ROFINROFINROFINROFIN BAASELBAASELBAASELBAASEL FranceFranceFranceFrance

New EasyMark

More

Contact : Jean-François POISSON, Tél : 01.39.57.71.03, [email protected]

ROFINs new EasyMark stands out due to its versatility and modularity. The compact laser

marking system with its modular design can be operated as laser class 1 and 4 systems by

removing side panels and can easily be integrated into production lines. Then It can also

accommodate long and bulky work pieces and becomes perfectly suited for use with

automatic part feeding solutions such as conveyors.

Latest diode-pumped or fiber laser technology and powerful software makes it the ideal all-

in-one laser marking system for a wide variety of applications. The lifting door (optionally

automatized) provides easy access to the entire working chamber. When the door is closed,

the process can be monitored from the large inspection window. The system is combined

with a camera and pilot laser for exact part positioning within the 120mmx120mm marking

area (optionally 180mmx180mm).

The standard configuration comes with a laptop (WINDOWS 7), VLM software, programmable

z-axis, pilot laser and camera observation. It will be available in October.

………… TREFFERTTREFFERTTREFFERTTREFFERT

New 3D robot laser for welding and marking

Laser applications represents an ever growing field in R&D since a few years and laser welding required intensive

developments for joining of plastics in order to achieve versatile solutions for all colours. It is now possible to weld

opaque or even transparent polymers. During Espace Laser exhibition*, Treffert will present its new 3D robot laser: at

1064nm it performs both laser marking and welding thanks to its 6 axes articulated sytem and clamping head.

More

Contact : Anne-Lise DURIER, Tel : +33(0)3 87 31 92 92, [email protected] *see page 5

At our sites in France and Germany, we develop colour

systems, masterbatches, additives and compounds for medical

technology, the automobile industry, the electrical industry

and many other sectors in which engineering plastics and

bioplastics are used. We supply products developed for

specific customers, from the smallest amounts to volumes

running into tons. One strength of our business that is

particularly appreciated by our customers is our acceptance of

orders involving high levels of development work and

technical advice.

Type Title Date, place Presentation

TRADE FAIR LASER World of

PHOTONICS INDIA

14/09 – 16/09

Mumbai

(IN)

Messe München Intl répond aux perspectives

commerciales se dessinant en Inde en implantant le

salon LASER dans ce pays en forte croissance où la

demande de systèmes à laser industriels devrait

augmenter ces prochaines années.

TRADE FAIR MICRONORA,

salon intl des

microtechniques

et de la précision

25/09 – 28/09

Besançon

(FR)

Salon professionnel multitechnologique, très ciblé

microtechniques, propose une offre large de la R&D à la

sous-traitance, jusqu'aux technologies de production.

CONFERENCE EOSAM, réunion

annuelle de

l’European Optical

Society

25/09 – 28/09

Aberdeen

(UK)

Rendez-vous de l’EOS sur les thématiques

Biophotonique, Photonique sur silicium,

Nanophotoniques et méta-matériaux, Micro-optique,

Systèmes optiques pour les industries de l’énergie et la

production…

TRADE FAIR &

CONFERENCE

MM, MEMS &

NANO Live UK

25/09 – 26/09

Birmingham

(UK)

Forum international pour la micro et la nano fabrication.

TRADE FAIR &

CONFERENCE

TCT Live 25/09 – 26/09

Birmingham (UK)

L’évènement pour la fabrication additive, l’impression

3D et le développement de produits.

TRADE FAIR SIANE, salon des

partenaires de

l’industrie du

Grand Sud

23/10 – 25/10

Toulouse

(FR)

Sous-traitance industrielle, équipement de production,

travail des métaux, fournitures industrielles, services à

l’industrie, transformation des matières, nouvelles

technologies…

TRADE FAIR EURO BLECH,

salon intl

technologique du

travail de la tôle

23/10 – 27/10

Hanovre

(DE)

Le plus grand salon au monde consacré à l’industrie du

travail de la tôle. 1400 exposants issus de 40 pays, des

démonstrations de machines, plus de 60000 visiteurs

professionnels attendus…

TRADE FAIR OPTO 23/10 – 25/10

Paris (FR)

L’évènement de l’innovation pour la recherche et

l’industrie.

TRADE FAIR ESPACE LASER,

salon des

nouvelles

technologies de

production

28/11 – 29/11

Mulhouse

(FR)

Salon international des procédés de fabrication

innovants. Procédés de fabrication par laser différentes

techniques de fabrication rapide, de prototypage, de

contrôle et métrologie associés.

TRADE FAIR EUROMOLD 27/11 – 30/11

Francfort (DE)

Salon international de la création de moules et de

l’outillage.

10



CALENDAR CALENDAR CALENDAR CALENDAR OF EVENTS IN CONNECTION WITH INDUSTRIAL OF EVENTS IN CONNECTION WITH INDUSTRIAL OF EVENTS IN CONNECTION WITH INDUSTRIAL OF EVENTS IN CONNECTION WITH INDUSTRIAL LASER LASER LASER LASER PROCESSESPROCESSESPROCESSESPROCESSES

Complete information on www.laserenligne.fr

= CLP will be present

http://www.procedes-laser.com/article-programme-et-inscription-jnpli-2012-108975742.html

http://ddata.over-blog.com/0/59/96/66/Micronora_2012/programme-micro-nano-2012.pdf

http://ddata.over-blog.com/0/59/96/66/Micronora_2012/zoom_laser_2012.pdf

http://ddata.over-blog.com/0/59/96/66/Micronora_2012/Revue_Micronora_n-129_p19.pdf

http://www.procedes-laser.com/article-micronora-2012-stand-collectif-laser-89575922.html

http://www.micronora.com/conferences2012/Conference_technique_GIMEF-Les_procedes_laser_dans_la_filiere_des_metaux_en_feuilles.pdf

http://www.laserap7.org/

Type Title Date, place Presentation

TRADE FAIR &

CONFERENCE

ICALEO, congrès

international des

applications laser

et opto-

électroniques

23/09 – 27/09

Anaheim

(US)

Depuis 30 ans, ICALEO propose des états de l’art de

fabrication par laser et des coups de projecteur sur le

futur de cette technologie. ICALEO est la première

source d’informations techniques du domaine.

COMMON

LASER BOOTH

MICRONORA

Collectif laser

CLP

25/09 – 28/09

Besançon

(FR)

L’expertise française en procédés laser industriels :

12 exposants membres du CLP.

Informations en ligne ici.

Communiqué de presse ici.

CONFERENCE MICRONORA

Animation laser

ZOOM

Zoom : le laser et ses applications industrielles en six

îlots thématiques.

En partenariat avec le Pôle des Microtechniques.

Présentation du zoom ici.


Conférence

GIMEF

26/09

Besançon

(FR)

Conférence technique sur les procédés laser dans la

filière des métaux en feuille.

Pré-programme et informations ici.


Conférences

FEMTO-ST

27/09

Besançon

(FR)

Conférences sur les micro et nanotechnologies.

Programme ici.

EUROPEAN

SEMINAR

LASERAP’7 01/10 – 05/10

Ile d’Oléron

(FR)

Séminaire européen (crédit formation) sur les

applications des lasers de puissance.

Pré-programme et informations ici.

CONFERENCE JNPLI, Journées

Nationales des

Procédés Laser

Industriels

28/11 – 29/11

Mulhouse

(FR)

Voir pages 2 à 5 de la Newslaser.

Consulter le site de l’évènement ici.

11



CALENDAR OF EVENTS ORGANIZED, COCALENDAR OF EVENTS ORGANIZED, COCALENDAR OF EVENTS ORGANIZED, COCALENDAR OF EVENTS ORGANIZED, CO----ORGANIZED AND ORGANIZED AND ORGANIZED AND ORGANIZED AND SPONSORED BY CLPSPONSORED BY CLPSPONSORED BY CLPSPONSORED BY CLP

Complete information on www.laserenligne.fr

= CLP will be present

12



TECHNOLOGICAL SURVEYTECHNOLOGICAL SURVEYTECHNOLOGICAL SURVEYTECHNOLOGICAL SURVEYMore information: [email protected]

CUTTINGCUTTINGCUTTINGCUTTINGAILU e-Newsletter No.49, août 2012

The article below is from the Spring 2013 Issue of the AILU Magazine

� 'Striation free' oxygen-assisted fibre laser cutting of thin section mild steel

MICROMACHININGMICROMACHININGMICROMACHININGMICROMACHININGPhotoniques, numéro 60, juillet/août 2012

� Le micro-usinage par laser et ses applications, J. Lopez

DRILLINGDRILLINGDRILLINGDRILLINGAILU e-Newsletter No.49, août 2012

The article below is from the Spring 2013 Issue of the AILU Magazine

� Laser percussion drilling of aerospace materials with a lamp pumped pulsed Nd: YAG laser

WELDINGWELDINGWELDINGWELDINGAustralasian Welding Journal, vol.57, 1er trimestre 2012, pp. 43-48

� Investigation of the feasibility of hybrid laser-GMA welding of high strength quenched and tempered steel

Rivista Italiana della Saldatura, vol.63, n°6, novembre-décembre 2011, pp. 789-798

� Soudage au laser Nd:YAG d'assemblages bout à bout constitués de fines tôles d'alliage de magnésium AZ31

Rivista Italiana della Saldatura, vol.64, n°1, janvier-février 2012, pp. 21-35

� Soudage des aciers inoxydables martensitiques à résilience élevée utilisés pour les composants

hydrodynamiques en construction navale : comparaison entre les technologies traditionnelles et les procédés

FHDE

Welding International, vol.26, n°3, mars 2012, pp. 231-235

� Special features of laser welding of aluminium alloys

Welding in the World, vol.56, n°1/2, janvier-février 2012, pp. 2-8

� Measurement and simulation of residual strain in a laser welded titanium ring

Welding in the World, vol.56, n°1/2, janvier-février 2012, pp. 9-20

� Laser beam weldability of high-manganese austenitic and duplex stainless steel sheets

Science and Technology of Welding and Joining, vol.16, n°8, novembre 2011, pp. 676-680

� Laser direct joining of carbon fibre reinforced plastic to stainless steel

LASERLASERLASERLASER SOURCESSOURCESSOURCESSOURCESTechniques de l’ingénieur, Site internet www.techniques-ingenieur.fr, article du 7 août 2012

� Le plus petit laser à semi-conducteur au monde

13



TECHNOLOGICAL SURVEYTECHNOLOGICAL SURVEYTECHNOLOGICAL SURVEYTECHNOLOGICAL SURVEYMore information: [email protected]

PATENTSPATENTSPATENTSPATENTS wwwwwwwwwwww....wipowipowipowipo....intintintint

ABLATIONABLATIONABLATIONABLATION� 30/09/2012, Heat treatment of a laser coating, Saint-Gobain Glass France

CUTTINGCUTTINGCUTTINGCUTTING� 23/08/2012, Pole sheet laser cutting machine, Gee Sun Automation Technology

� 01/08/2012, Methods for laser cutting articles from chemically strengthened glass substrates, Corning Inc.

MARKINGMARKINGMARKINGMARKING� 30/08/2012, Polymer laser marking, Ferro Corporation

MATERIALSMATERIALSMATERIALSMATERIALS� 09/08/2012, Laser-markable and laser-weldable polymers, Merck Patent GmbH

DRILLINGDRILLINGDRILLINGDRILLING� 30/08/2012, Method of high power laser-mechanical drilling, Foro Energy

THESESTHESESTHESESTHESES httphttphttphttp:::://tel//tel//tel//tel....archivesarchivesarchivesarchives----ouvertesouvertesouvertesouvertes....frfrfrfr

SURFACESURFACESURFACESURFACE TEXTURINGTEXTURINGTEXTURINGTEXTURING� 16/04/2012, Texturation de surface par LASER femtoseconde en régime ElastoHydroDynamique et limite :

application au contact Segment / Piston / Chemise d'un moteur thermique à combustion, F-P. Ninove

The Club Laser et Procédés thanks the INSTITUT DE SOUDURE for its gracious contribution to the technological survey

Sponsor members

Membres Bienfaiteurs


Cleanspace, 354 voie Magellan

Parc d’Activité Alpespace

F/73800 SAINTE HELENE DU LAC

Tél. : +33(0)4 79 26 48 26

Mob. : +33(0)6 04 59 72 19

[email protected]

Siège social :

Club Laser et Procédés c/o SYMOP

Maison de la Mécanique

45 rue Louis Blanc

F/92400 COURBEVOIE

Association loi 1901

SIRET : 392 862 892 00024

www.laserenligne.fr

http://www.laserenligne.fr/competences/welience-ub-filiale.html

http://www.laserenligne.fr/competences/trumpf.html

http://www.laserenligne.fr/competences/servilase.html

http://www.laserenligne.fr/competences/rofin-baasel-france.html

http://www.laserenligne.fr/competences/prc-laser-europe.html

http://www.laserenligne.fr/competences/laser-machines.html

http://www.laserenligne.fr/competences/laser-cheval.html

http://www.laserenligne.fr/competences/irepa-laser.html

http://www.laserenligne.fr/competences/industrial-laser-systems.html

http://www.laserenligne.fr/competences/institut-maupertuis.html

http://www.laserenligne.fr/competences/clfa-coop%C3%A9ration-laser-franco-allemande.html

http://www.laserenligne.fr/competences/alphanov.html

http://www.laserenligne.fr/competences/air-liquide-france-industrie.html

14


Membres Bienfaiteurs du Club

Laser et Procédés

CLP’s Benefactor Members

Cliquer les logos Clic on logos

Documents

Overview Association pour le développement et la promotion ...ddata.over-blog.com/0/59/96/66/Newslaser/Newslaser32_EN.pdf09h20 Welcome and opening speech 09h40 LONDON IMPERIAL COLLEGE