Service Manual OLED TV

TX-65CZ950E TX-65CZW954 TX-65CZR950 TX-65CZC954

EL1 Chassis

Panasonic Corporation 2015. Unauthorized copying and distribution is a violation of law.

ORDER No. PCZ1510152CE

There are special components used in this equipment which are important for safety. These parts are marked in the Schematic Diagrams, Circuit Board Diagrams, Explorer Views and Replacement Parts List. It is essential that these critical parts should be replaced with manufacturers specified parts to prevent shock, fire or other hazards. Do not modify the original design without permission of manufacturer.

IMPORTANT SAFETY NOTICE

This service information is designed for experienced repair technicians only and is not designed for use by the general public. It does not contain warnings or cautions to advise non-technical individuals of potencial dangers in attempting to service a product. Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service or repair the product or products deal within this service information by anyone else could result in serious injury or death.

Warning

Contents SAFETY PRECAUTIONS ........................................... 3

GENERAL GUIDE LINES ...................................... 3

TOUCH CURRENT CHECK ............................... 3

PREVENTION OF ELECTROSTATIC DISCHARGE

(ESD) TO ELECTROSTATICALLY SENSITIVE (ES)

DEVICES .................................................................... 4

ABOUT LEAD FREE SOLDER (PBF) ......................... 5

SUGGESTED PB FREE SOLDER ........................ 5

SERVICE NAVIGATION ............................................. 6

CHASSIS BOARD LAYOUT .................................. 6

SERVICE HINTS ........................................................ 7

APPLICABLE SIGNALS ............................................ 11

SPECIFICATIONS .................................................... 12

TECHNICAL DESCRIPTION ................................ .14

SPECIFICATION OF KEY FOR DTCP-IP,

C2MOD, CI PLUS, DIMORA, HDCP2.2,

NETFLIX, WIDEVINE, FREETIME ....................... 14

GENERAL INFORMATION ................................. 14

REPLACEMENT OF ICS ..................................... 14

MODEL AND KEYS ............................................ 14

USB HDD RECORDING ..................................... 14

SCHEMATIC DIAGRAMS NOTE .............................. 98

A-BOARD (1 OF 44) SCHEMATIC DIAGRAM .......... 99

FR-BOARD (1 OF 12) SCHEMATIC DIAGRAM ..... 143

GK-BOARD SCHEMATIC DIAGRAM .................... 155

PN-BOARD SCHEMATIC DIAGRAM ..................... 156

K-BOARD SCHEMATIC DIAGRAM ........................ 157

S-BOARD SCHEMATIC DIAGRAM ........................ 158

CONDUCTOR VIEWS ............................................ 159

SERVICE PORT (M3 MINI JACK) SPEC. ................. 15

SETTING INSPECTION ............................................ 18

CS MAINTENANCE MENU ...................................... 19

SYSTEM INFORMATION ......................................... 20

HOTEL MODE .......................................................... 21

DATA COPY BY USB MEMORY .............................. 22

DATA COPY FROM TV SET TO USB MEMORY ..... 23

DATA COPY FROM USB MEMORY TO TV SET ..... 24

OPTION BYTES DESCRIPTION .............................. 25

SELF CHECK ........................................................... 26

POWER LED BLINKING TIMING CHART ................ 27

OLED PANEL TEST MODE ...................................... 28

WIRING DIAGRAM ................................................... 29

BLOCK DIAGRAM (1 OF 3) ...................................... 30

PARTS LOCATION ................................................... 34

LOCATION OF LEAD WIRING ................................. 38

PACKING TRUCTURE ............................................. 39

REPLACEMENT PARTS LIST NOTE ....................... 40

REPLACEMENT PARTS LIST .................................. 41

2

Safety PrecautionsGeneral Guide Lines

1. When servicing, observe the original lead dress. If a short circuit is found, replace all parts which have been overheated or damaged by the short circuit.

2. After servicing, see to it that all the protective devices such as insulation barriers, insulation papers shields are properly installed.

3. After servicing, make the following touch current checks to prevent the customer from being exposed to shock hazards. 4. Always ensure cover label TBM4GU113 is correctly replaced before returning to customer (see Fig.1). Touch-Current Check 1. Plug the AC cord directly into the AC outlet. Do not use an isolation transformer for this check. 2. Connect a measuring network for touch currents between each exposed metallic part on the set and a good earth

ground such as a water pipe, as shown in Fig. 2. 3. Use Leakage Current Tester (Simpson 228 or equivalent) to measure the potential across the measuring network. 4. Check each exposed metallic part, and measure the voltage at each point. 5. Reserve the AC plug in the AC outlet and repeat each of the above measure. 6. The potential at any point (TOUCH CURRENT) expressed as voltage U1 and U2, does not exceed the following values:

For a. c.: U1 = 35 V (peak) and U2 = 0.35 V (peak); For d. c.: U1 = 1.0 V, Note: The limit value of U2 = 0.35 V (peak) for a. c. and U1 = 1.0 V for d. c. correspond to the values 0.7 mA (peak) a. c. and 2.0 mA d. c. The limit value U1 = 35 V (peak) for a. c. correspond to the value 70 mA (peak) a. c. for frequencies greater than 100 kHz.

7. In case a measurement is out of the limits specified, there is a possibility of a shock hazard, and the equipment should be repaired and rechecked before it is returned to the customer.

Fig. 2

TO APPLIANCES EXPOSED METAL PARTS

Resistance values in ohms ()

V R0=500

RS=1500 CS=0.22F

10k

0.022F

COLD WATER PIPE (EARTH GROUND)

V: Voltmeter or oscilloscope (r.m.s. or peak reading)

Measuring network for TOUCH CURRENTS

Input resistance: 1M Input capacitance:200pF Frequency range: 15Hz to 1MHz and d.c.respectively

NOTE Appropriate measures should be taken to obtain the correct value in case of non-sinusoidal waveforms

U2 (V) U1 (V)

Fig. 1

3

Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor "chip" components. The following techniques should be used to help reduce the incidence of component damage caused by electrostatic discharge (ESD). 1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off any ESD on

your body by touching a known earth ground. Alternatively, obtain and wear a commercially available discharging ESD wrist strap, which should be removed for potential shock reasons prior to applying power to the unit under test.

2. After removing an electrical assembly equipped with ES devices, place the assembly on a conductive surface such as aluminum foil, to prevent electrostatic charge build up or exposure of the assembly.

3. Use only a grounded-tip soldering iron to solder or unsolder ES devices. 4. Use only an anti-static solder removal device. Some solder removal devices not classified as "anti-static (ESD

protected)" can generate electrical charge sufficient to damage ES devices. 5. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ES devices. 6. Do not remove a replacement ES device from its protective package until immediately before you are ready to install it.

(Most replacement ES devices are packaged with leads electrically shorted together by conductive foam, aluminum foil or comparable conductive material).

7. Immediately before removing the protective material from the leads of a replacement ES device, touch the protective material to the chassis or circuit assembly into which the device will be installed. Caution Be sure no power is applied to the chassis or circuit, and observe all other safety precautions.

8. Minimize bodily motions when handling unpackaged replacement ES devices. (Otherwise harmless motion such as the

brushing together of your clothes fabric or the lifting of your foot from a carpeted floor can generate static electricity (ESD) sufficient to damage an ES device).

There are special components used in this equipment which are important for safety. These parts are marked by in schematic diagrams, exploded views and replacement parts list. It is essential that these critical parts should be replaced with manufacturers specified parts to prevent shock, fire, or other hazards. Do not modify the original design without permission of manufacturer.

IMPORTANT SAFETY NOTICE

4

About lead free solder (PbF) Note: Lead is listed as (Pb) in the periodic table of elements. In the information below, Pb will refer to Lead solder, and PbF will refer to Lead Free Solder. The Lead Free Solder used in our manufacturing process and discussed below is (Sn+Ag+Cu). That is Tin (Sn), Silver (Ag) and Copper (Cu) although other types are available. This model uses Pb Free solder in its manufacture due to environmental conservation issues. For service and repair work, wed suggest the use of Pb free solder as well, although Pb solder may be used. PCBs manufactured using lead free solder will have the PbF within a leaf Symbol stamped on the back of PCB. Caution

Pb free solder has a higher melting point than standard solder. Typically the melting point is 50 ~ 70 F (30~40C) higher. Please use a high temperature soldering iron and set it to 700 20 F (370 10 C).

Pb free solder will tend to splash when heated too high (about 1100 F or 600 C). If you must use Pb solder, please completely remove all of the Pb free solder on the pins or solder area before applying Pb solder. If this is not practical, be sure to heat the Pb free solder until it melts, before applying Pb solder.

After applying PbF solder to double layered boards, please check the component side for excess solder which may flow onto the opposite side. (see Fig.3)

Suggested Pb free solder There are several kinds of Pb free solder available for purchase. This product uses Sn+Ag+Cu (tin, silver, copper) solder. However, Sn+Cu (tin, copper), Sn+Zn+Bi (tin, zinc, bismuth) solder can also be used. (see Fig.4)

Fig.3

Fig.4

5

Service Navigation Chassis Board Layout

Board Name FunctionA-Board AV(COMPONENT/VIDEO),AV(SCART), HDMI1-4, USB1-3, WI-FI, BLUETOOTH, Digital

Audio Out,TUNER A/DVB-T/T2/C(Sx2), DVB-T2/T/C/S2/S Dem 2x, CI slot 2x, Ethernet, Headphone jack, SERVICE PORT - RS-232C, Peaks IC_Pro5 + NAND FLASH eMMC,IC

EASTER MTK + NAND FLASH eMMC, DDR3 SDRAM FR-Board GCX2 2x, AUDIO AMP, SPEAKER+WOOFER+TWEETER output P1-Board* Power Supply P2-Board* Power Supply K-Board Remote Receiver, Power and Timer LED, C.A.T.S

PN-Board Temperature Sensor GK-Board Control Buttons S-Board Main Power Switch

A-Board

P1-Board*

FR-Board P2-Board*

GK-Board

S-Board

PN-Board

K-Board

Note: *Caution when replacing P1/P2-Board. Primary circuit exists on P1 and P2 board. The circuit is identified as HOT on PCB. Use extreme care to prevent accidental shock when servicing.

6

Service Hints Caution during servicing (Handling the TV set) At least two people are required to move the OLED TV set. 1. Dont handle the side of OLED Panel (Fig. 5) Due to the large screen and thin design, OLED Panel is weaker than other present TV set. If handle with both side, OLED panel will be twisted and damaged. 2. Dont move the TV set without Back Cover. Use handle hole of Back Cover to move the TV set.

How to Handle Use handle hole of Back Cover and support at top of the TV set in the area which can be handle. (Fig. 6) Put the Back Cover before moving TV set. If the Back Cover was removed for servicing, put it again for moving. At least 4 screws should be put for temporary fixing the Back Cover. (Fig.7)

Reinforced by Metal Plate

Area which can be handle

Area which can be handle

Fig.5

Area which should not be handle (Both side)

Support at top Of the screen

Use handle hole

Fig.6

Fig.7

Screw for temporary fixing

7

Handling the OLED Panel At last two people are required to move the OLED Panel. Due to the large screen and thin design OLED Panel is weaker than other present TV set. If handle with both side OLED panel will be twisted and damaged. 1. Transport only in upright position. Transporting the OLED Panel facing upwards or downwards may cause damage to the internal circuitry. Handle the metal plate portion at top and bottom side of the panel. (Picture 8) (Use handle hole of Back Cover when move the spare parts of OLED Panel.) 2. When laying the OLED panel Handle the metal plate portion at top and bottom side of the panel. (Picture 9) 3.How to lay the front side of OLED Panel on the table Due to the curved design (5000R) is introduced for this OLED Panel if laying the OLED panel on the flat table directly OLED panel will be twisted and damaged due to weight itself. (see Fig.10) CUSHION-FRONT (TPD0E51001) is necessary for laying the OLED Panel on the table.

Fig.10

NG

Fig.8

Fig.9

CUSHION-FRONT (TPD0E51001)

OK

8

How to remove the pedestal assembly Prepare a CUSHION-FRONT (TPD0E51001) (see Fig.11) which included as one of packing for TV set or spare part of OLED Panel on the flat surface. Using CUSHION-FRONT is for safely service to avoid transformation or damage of OLED panel.

Use handle hole of Back Cover and support at top of the TV set in the area which can be handle and lay the front side of OLED TV to prepared cushion front. (see Fig.12) Remove the 8 fixing screws and pull out pedestal assembly (see Fig.13)

Fig.11

Fig.12

Fig.13

(3)

SCREWS (3) XYN4+F14NK/8pcs/

(3) (3)(3)

(3)(3)

(3)

(3)

9

How to remove the backcover Remove the 1 fixing screw and AC Cord cover. (see Fig.14) Remove the 32 fixing screw and Back Cover. (see Fig.15)

SCREWS(1) THTD037J /1pcs/

Fig.14

(1)

SCREWS (1) THTD037J /6pcs/ (2) THEC1509 /18pcs/ (3) XYN4+F14NK /8pcs/

(2) (2) (2) (2)

(2)

(2)(2)

(2) (2)

(2)

(2)(2)

(2)

(2)

(2)

(1)

(1) (1)

(1)

(1)

(2)

(3)

(3)

(3)

(3)

(3)

(3)

(3)

Fig.15

(2) (2)

(1)

(3)

10

Applicable Signals Note:

Signals other than above may not be displayed properly. The above signals are reformatted for optimal viewing on your display.

Signal name COMPONENT HDMI

525 (480) / 60i,60p * * 625 (576) / 50i, 50p * * 750 (720) / 60p, 50p * * 1,125 (1,080) / 60i, 50i * * 1,125 (1,080) / 60p,50p, 24p * 3,840 x 2,160 / 60p, 50p, 30p, 25p, 24p * 4,096 x 2,160 / 60p, 50p, 30p, 25p, 24p *

Component (Y, Pb, Pr) (from AV2 terminal), HDMI

11

Specifications

Power Source: 220-240V AC, 50 / 60Hz

Rated Power Consumption: 390W Stand-by Power Consumption: 0.30W Aerial Impedance: 75 unbalanced, Coaxial Type Receiving System: CZ950E, CZW954, CZC954 DVB-S/S2 Digital terrestrial services (MPEG2 and MPEG4-AVC(H.264)) Receiver frequency range - 950 MHz to 2 150 MHz DiSEqC Version 1.0 DVB-T/T2 Digital terrestrial services (MPEG2 and MPEG4-AVC(H.264)) DVB-C Digital cable services (MPEG2 and MPEG4-AVC(H.264)) PAL I/H, B/G, SECAM B/G, L/L VHF E2-E12 VHF H1-H2 (ITALY) VHF A-H (ITALY) UHF E21-E69 CATV (S01-S05) CATV S1-S10(M1-M10) CATV S11-S20 (U1-U10) CATV S21-S41 (HYPERBAND) PAL D/K, SECAM D/K VHF R1-R2 VHF R3-R5 VHF R6-R12 UHF E21-E69 PAL 525/60 (AV only) M.NTSC (AV only) NTSC (AV only) Receiving System: CZR950 DVB-S/S2 Digital terrestrial services (MPEG2 and MPEG4-AVC(H.264)) Receiver frequency range - 950 MHz to 2 150 MHz DiSEqC Version 1.0 DVB-T/T2 Digital terrestrial services (MPEG2 and MPEG4-AVC(H.264)) DVB-C Digital cable services (MPEG2 and MPEG4-AVC(H.264)) PAL D/K, SECAM D/K VHF R1-R2 VHF R3-R5 VHF R6-R12 UHF E21-E69 PAL 525/60 (AV only) M.NTSC (AV only) NTSC (AV only) Satellite dish input: Female F-type 75 x2 Aerial - Rear: VHF/UHF Operating Conditions: Temperature: 0C 35C Humidity: 20% 80% RH (non condensing)

Terminals: AV1 IN Video (21 pin) 1V p-p 75 Audio (21 pin) 500mV rms 10k RGB (21 pin) 0.7V p-p 75 AV1 OUT Video (21 pin) 1V p-p 75 Audio (21 pin) 500mV rms 1k AV2 IN Video (RCAx1) 1V p-p 75 (COMPONENT/VIDEO) Audio (RCAx2) 500mV rms 10k (used for HDMI_ AV2 audio IN)

Video (RCAx3) Y:1V p-p 75 (including synchronisation) Pb/Cb, Pr/Cr: 0.35V p-p 75

HDMI1/2/3/4 Type A Connectors HDMI 1/3/4 : 4K, 3D (3D content of 4K format is not supported), Content Type, Deep Colour, x.v. ColourTM HDMI 2 : 4K, 3D (3D content of 4K format is not supported), Content Type, Audio Return Channel, Deep Colour, x.v. ColourTM This TV supports HDAVI Control 5 function.

12

DIGITAL AUDIO OUT PCM / Dolby digital / Fibre optic USB 1/2/3 USB1/2 : DC 5V, Max 500mA [Hi-Speed USB (USB 2.0)] USB3 : DC 5V, Max 900mA [Super Speed USB (USB 3.0)] ETHERNET RJ45, IEEE802.3 10BASE-T / 100BASE-TX / 1000BASE-T CARD SLOT Common interface slot (Complies with CI+) x2 Wireless LAN: CZ950E, CZW954, CZC954 Standard Compliance IEEE802.11a/n

Frequency Range IEEE802.11a/n: 5.180 GHz 5.320 GHz 5.500 GHz 5.580 GHz 5.660 GHz 5.700 GHz IEEE802.11b/g/n: 2.412 GHz 2.472 GHz Security WPA2-PSK (TKIP/AES) WPA-PSK (TKIP/AES) WEP(64 bit/128 bit) Wireless LAN: CZR950 Standard Compliance IEEE802.11a/n

Frequency Range IEEE802.11a/n: 5.15 GHz 5.35 GHz 5.47 GHz 5.85 GHz IEEE802.11b/g/n: 2.400 GHz 2.4835 GHz Security WPA2-PSK (TKIP/AES) WPA-PSK (TKIP/AES) WEP(64 bit/128 bit) Bluetooth wirelless technology: Standard Compliance Bluetooth 3.0

Frequency Range 2.402 GHz 2.480 GHz 3D Eyewear: Dimensions: Width: Height: Depth: 165mm 38mm 166mm Mass: Approx. 18g Usage temperature range: 0C 40C Materials: Main body /Lens section Resin OLED panel: TZLP018RNVE 3840 x 2160, 16:9 Visible Diagonal 1640mm Audio Output: 60W (10W x 2 + 10W x 2 + 10W x 2)

Headphones: 3.5mm, 8 Impedance

Accessories supplied : Remote Control Touch Pad Remote Control Pedestal Assy Cosmetic Cover Assy 4 x R03 Batteries 3D Glasses Scart cable AV cable Dimensions:

Width: Height: Depth: With Pedestal / Cosmetic Cover Assy 1,448mm 913mm 311mm

With Cosmetic Cover Assy 1,448mm 847mm 113mm

TV set only 1,448mm 847mm 106mm

Mass: With Pedestal / Cosmetic Cover Assy 32.0kg With Cosmetic Cover Assy 27.0kg TV only 24.0kg

Design and Specifications are subject to change without notice. Mass and dimensions shown are approximate.

13

Technical Description Specification of KEY for DTCP-IP, C2MOD, CI Plus, DIMORA, HDCP2, Netflix, Widevine, Freetime General information: PRO5 IC (IC8000) + eMMC(IC8920) 1. eMMc Memory(IC8920) for spare parts has the seed of KEY for each. 2. The final KEY data will be generated by Pro5 IC (IC8000) when SELF CHECK was done and are stored in both Pro5 IC (IC8000) and eMMc (IC8920). MTK IC (IC10000) + eMMC(IC14000) 1. eMMc Memory(IC14000) for spare parts has the seed of KEY for each. 2. The final KEY data will be generated by MTK IC (IC10000) when SELF CHECK was done and are stored in both MTK IC (IC10000) and eMMc (IC14000). All KEYs are not generated for all models. The necessary KEY are only generated and stored depend on the feature of models. Replacement of ICs: PRO5 IC (IC8000) + eMMC(IC8920) 1. When Pro5 IC (IC8000) is replaced, eMMc (IC8920) should be also replaced with new one the same time. 2. When eMMc Memory (IC8920) is replaced, Pro5 IC (IC8000) is not necessary to be replaced the same time. After the replacement of IC, SELF CHECK should be done to generate the final KEY data. MTK IC (IC10000) + eMMC(IC14000) 1. When MTK IC (IC10000) is replaced, eMMc (IC14000) should be also replaced with new one the same time. 2. When eMMc Memory (IC14000) is replaced, MTK IC (IC10000) is not necessary to be replaced the same time. After the replacement of IC, SELF CHECK should be done to generate the final KEY data. How to SELF CHECK: While pressing [VOLUME ( - )] button on the main unit, press the MENU button on the remote control for more than 3 seconds. TV will be forced to the factory shipment setting after this SELF CHECK. Model and Keys:

USB HDD Recording: General information: Digital TV programmes can be recorded in USB HDD. C2MOD key generated in A-board by SELF CHECK binds TV and USB-HDD for communication. That key is only one key for them. If the key is difference, TV can not access USB-HDD. Caution: New key will be generated by following SELF CHECK and previous TV programmes recorded in USB HDD will not be viewed. SELF CHECK: While pressing [VOLUME ( - )] button on the main unit, press the MENU button on the remote control for more then 3 seconds.

Model No.

Keys

DTCP-IP (PRO5)

DTCP-IP (MTK)

C2MOD (PRO5)

CI PLUS (PRO5)

DIMORA (PRO5)

HDCP2 (PRO5)

Netflix Widevine (PRO5)

Freetime (PRO5)

MAC (MTK)

TX-65CZ950E Yes Yes Yes Yes Yes Yes Yes No Yes TX-65CZW954 Yes Yes Yes Yes Yes Yes Yes No Yes TX-65CZR950 Yes Yes Yes Yes Yes Yes Yes No Yes TX-65CZC954 Yes Yes Yes Yes Yes Yes Yes No Yes

14

Service port (M3 mini Jack) Specifications The Service port (M3 mini Jack) on the following OLED TVs can use as the RS232C terminal which is a standard computer SERIAL interface. *This operation system should be used by the certified professional dealer. PC Control of the OLED TV The OLED TV can be controlled by a personal computer when connected through an RS232C/ M3 mini jack conversion cable (not supplied). The computer will require software which allows sending and receiving of control data through its SERIAL port. Please see required parameters and commands below. Communication parameters

Signal level RS-232C compliant Synchronization method Asynchronous

Baud rate 9600 bps Parity None

Character length 8 bits Stop bit 1 bit

Flow control - Basic format for control data The transmission of control data from the PC starts with a STX signal, followed by the command, the parameters, and lastly an EXT signal in that order. If there are no parameters, then the parameter signal does not need to be sent. *Please see other side regarding Commands and Parameters. Connection Notes: With standby mode, this OLED TV responds to "PON" and "QPW" commands only. Wait for the response of the first command to come from this unit before sending the next command. If multiple commands are transmitted, be sure to keep intervals of 250 m sec. Send the command again when the call back command is unusual. If an incorrect command is sent by mistake, this OLED TV will send an "ER401" or "ER402" command back to the computer. This OLED TV does not respond for 15 seconds when "PON" or "POF" commands are transmitted. Send "EXT" commands before sending "IMS:**" commands. MUTE commands ("AMT: 0" and "AMT: 1") and "AVL: ***" command are invalid in case of HDMI (CEC) cooperation. However AMT, AUU, AUD commands is effective. (MUTE rotation (toggle), VOLUME UP and VOLUME DOWN controls are possible.)

15

Main, Input & Picture Control Command

Control Command

Inquiry Command

Call back Command Parameter note

STANDARD CONTROL

POWER ON PON QPW QPW : * "0"(OFF)/ "1"(ON)

POWER OFF POF

VOL (level) AVL: ***

QAV QAV : *** "000" - "100" (up) AUU (down) AUD

MUTE AMT (Toggle) QAM QAM : * "0"(NO MUTED) / "1"(MUTED) AMT: *

ASPECT

DAM: ****

QAS QAS : ****

"FULL" "NORM"(4:3) "ZOOM" "SELF" (Auto) / ""HFUL" / "VFUL"

[ 480i/480p ] Option : 16:9(Full) 4:3 Zoom [ 1080i/720p/1080p ] Option : 16:9(Full) 4:3 Zoom [ 2560p/3840p(4k format) ] : Option : 16:9(Full) [ 4096p (4KDCI) ] : Option : 16:9(Full) H-Full V-Full

DAM (Toggle)

INPUT SELECT

CH UP CHU - - - - - - CH DOWN CHD - - - - - - TV IMS : TV

QMI QMI : **

"TV"

Analogue TV IMS : TVA "TVA" DVB-T IMS : TVD "TVD" DVB-S/Other Sat IMS : BS1 "BS1"

Freesat IMS : BS2 DVB-C IMS : CAB "CAB" SAT-IP IMS : SIP Video 1 IMS : V1 "V1" Video 2 IMS : V2 "V2" Component 1 IMS : C1 "C1" HDMI 1 IMS : H1 "H1" HDMI 2 IMS : H2 "H2" HDMI 3 IMS : H3 "H3" HDMI 4 IMS : H4 "H4" DisplayPort IMS : DP1 "DP1" SD/USB IMS : SDU "SDU"

VIEWING MODE

Dynamic VPC : VVT

QPC QPC : ***

"VVT"

Normal VPC : STD "STD"

THX Cinema VPC : THX "THX" THX : Except PHOTO(JPEG), MUSIC THX Bright Room VPC : THB "THB"

True Cinema VPC : CNM "CNM"

Cinema VPC : THR "THR"

Custom VPC : CST "CST" Monitor VPC : MON "MON" Professional 1 (isf day) VPC : PR1 "PR1" Professional 2 (isf night) VPC : PR2 "PR2"

16

Else & Remote Controller Key Command

Control Command Inquiry Command

Call back Command Parameter note

LAST VIEW LCH

Information

INF

-- QIF QIF : *****

480i 480p 576i 576p 720p 1080i 1080p 2160pQFHD 2160p4KDCI

"2160pQFHD" & "2160p4KDCI" only for 4k

DIRECT CH INPUT

0 ICH : 0 - - - 1 ICH : 1 - - -

2 ICH : 2 - - -

3 ICH : 3 - - -

4 ICH : 4 - - -

5 ICH : 5 - - -

6 ICH : 6 - - - 7 ICH : 7 - - - 8 ICH : 8 - - -

9 ICH : 9 - - -

MENU FUNCTION

MENU MEN - - -

SELECT SEL - - - RETURN RTN - - - EXIT EXT - - - ARROW LEFT ARL - - - ARROW RIGHT ARR - - - ARROW UP ARU - - - ARROW DOWN ARD - - - OPTION OSM - - - RED RED - - - GREEN GRN - - - YELLOW YEL - - - BLUE BLU - - - APPS APS - - - 3D O3D - - -

17

Setting Inspection Voltage Confirmation

A board Description Test point Voltage

USB5V TP5440 5.17V 0.25V USB1 TP8652 5.00V 0.25V USB2 TP8660 5.00V 0.25V USB3 TP8656 5.00V 0.25V USB-WIFI TP8650 5.2V 0.20V SUB3.3V TP5401 3.36V 0.15V MTK3.3V TP5200 3.33V 0.15V DCDC3.3V TP8970 3.00V 0.15V HDMI3.3V TP4507 3.33V 0.17V SUB_AI_3.3V TP2300 3.3V 0.17V MT_STB3.3V TP13019 3.3V 0.17V STB_1.5V TP11001 1.52V 0.07V MTK_SUB1.0V TP11000 1.02V 0.05V AVDD1.0V TP11002 1.06V 0.05V SUB1.8V TP8105 1.8V 0.9V SUB_M_0.9V TP8100 1.03V 0.09V SUB_I_0.9V TP8104 1.03V 0.09V STB_I_1.8V TP8108 1.8V 0.9V STB_I_1.5V TP8102 1.52V 0.07V STB_I_1.2V TP8109 1.29V 0.07V STB_I_0.9V TP8107 0.96V 0.13V HDMI1.1V TP4505 1.13V 0.06V RIO1.2V TP4504 1.22V 0.06V WOL3.3V TP8600 3.3V 0.17V REG_1.8V TP5702 1.84V 0.1V LNB_PWR1 TP6702 18V 1.0V SUB9V TP5004 9V 0.4V DMD_1.1V_3 TP5704 1.12V 0.11V

SUB_CI_5V TP8400 5.0V 0.5V SUB_CI_5V-B TP8500 5.0V 0.5V M_3.3V TP8492 3.3V 0.17V M_1.2V TP8406 1.2V 0.12V LNB_PWR2 TP6703 18V 1.0V SUB5V TP5420 5.06V 0.25V

18

CS Maintenance Menu MPU controls the functions switching for each IICs through IIC bus in this chassis. The following setting and adjustment can be adjusted by remote control in Service Menu How to enter into Service Mode While pressing [VOLUME ( - )] button on the main unit, press the [RED] button on the remote control for 3 times within 2 seconds.

How to exit Switch off the power with the [POWER] button on the main unit or the [POWER] button on the remote control.

CS Maintenance Menu OPT EDID CLK DRV CHECK

Key Command

Press the ( / / / ) button to step up/down/right/left through the functions and adjustments Press the OK button to change the adjustment values. Press the RETURN button for return to the main menu.

19

System Information How to access

1. While pressing [MENU] button on the remote control. 2. To select [ Help] and then to select [System Information].(see Fig.16, Fig.17)

*Sample only

How to exit Press the [RETURN] button on the remote control.

System Information

SW version 3116-10400-02550 3116 10400 02550

Peaks SW GenX Main EASTER SW (DEC-SW)

Status1 0c 7201-0003 0000-0100 0c 7201-0003 0000-0100

Outer model ID Inner model ID Panel inch size

Status2 002d-102-0017b8 002d 102 0017b8

LSI Package LSI Release Model data version

Status3 00-000000-F000

00 00 00 00 F

Number of bad block in NAND Flash (dec) Peaks reboot counter System crash counter Emergency (SOS) counter Peaks NAND Maker ID

Status4 A00000-0000001-00000

A 00000 0000001 00000

Power-On period (A

Hotel Mode 1. Purpose Restrict a function for hotels. 2. Access command to the Hotel mode setup menu. In order to display the Hotel mode setup menu, please enter the following command (within 2 second). [TV] : Vol.[Down] + [REMOTE] : AV (3 times) Then, the Hotel mode setup menu is displayed.

3. To exit the Hotel mode: Switch off the power with the [POWER] button on the main unit or the [POWER] button on the remote control or pressing [EXIT] button on the remote control. 4. Explain the Hotel mode setup menu.

ITEM Function Hotel Mode Select hotel mode ON/OFF Initial INPUT Select input signal modes.

Set the input, when each time power is switched on. Selection: Off/DVB-S/DVB-T/AV1/AV2/ HDMI1/HDMI2/HDMI3/HDMI4/ *Off: give priority to the last memory. However, Euro Model is compulsorily set to TV.

Initial POS Select programme number. Selection: Off/0 to 99 *Off: give priority to the last memory

Initial VOL Level Adjust the volume when each time power is switched on. Selection/Range: Off/0 to 100 *Off: give priority to the last memory

Maximum VOL Level

Adjust maximum volume. Range: 0 to 100

Button Lock Select local key conditions. Selection: Off/SETUP/MENU *Off: altogether valid *Setup: only F-key is invalid

(Tuning guide (menu) can not be selected.) *MENU: only F-key is invalid

(only Volume/Mute can be selected.) Remote Lock Select remote control key conditions.

Selected Off/SETUP/MENU *Off: altogether valid *Setup: only Setup menu is invalid MENU: Picture/Sound/Setup menu are invalid

Private Information

Select private information for VIERA Cast is Keep or Reset if Hotel mode is set to [On] when TV power on. Selection : Keep/Reset Keep: private information for VIERA Cast is keep Reset: private information for VIERA Cast is reset

Hotel mode

Hotel mode Off

Initial INPUT Off

Initial POS Off

Initial VOL Level Off

Maximum VOL Level 100

Button Lock Off

Remote Lock Off

Private Information Keep

Select

RETURN

Change

21

Data Copy by USB Memory Purpose a) Board replacement (Copy the data when exchanging A-board): When exchanging A-board, the data in original A-board can be copied to USB Memory and then copy to new A-board.

b) Hotel (Copy the data when installing a number of units in hotel or any facility): When installing a number of units in hotel or any facility, the data in master TV can be copied to USB Memory and the copy to other TVs.

Preparation Make pwd file as startup file for (a) or (b) in an empty USB Memory.

1. Insert an empty USB Memory to your PC. 2. Right-click a blank area in a USB Memory window, point to New, and then click text document. A new file is created

by default (New Text Document.txt). 3. Right-click the new text document that you just created and select rename, and then change the name and

extension of the file to the following file name (a) or (b) and press ENTER. File name:

(a) For Board replacement: boardreplace.pwd (b) For Hotel: hotel.pwd

Note: Please make only one file to prevent the operation error. No any other file should be in USB Memory.

(After exchanging)

TV

A-board USB Memory

(Before exchanging) Copy to USB Memory

Following data can be copied. User setting data (inc. Hotel mode setting data) Channel scan data Adjustment and factory preset data

Master TV Other TV Other TV Other TVFollowing data can be copied. User setting data (inc. Hotel mode setting data) Channel scan data

Copy to USB Memory Copy from USB Memory

USB Memory

22

Data Copy from TV set to USB Memory 1. Turn on the TV set. 2. Insert USB Memory with a startup file (pwd file) to USB Terminal.

On-screen Display will be appeared according to the startup file automatically. 3. Input a following password for (a) or (b) by using remote control.

(a) For Board replacement: 2770 (b) For Hotel: 4850

Data will be copied from TV set to USB Memory. It takes around 2 to 6 minutes maximum for copying.

4. After the completion of copying to USB Memory, remove USB Memory from TV set. 5. Turn off the TV set.

Note: Following new folder will be created in USB Memory for data from TV set.

(a) For Board replacement: user_setup (b) For Hotel: hotel

Data copy (Board replacement) or (Hotel)

Input Password 2770 or 4850

Performing

Completion

Performing

Data Copy(Board replacement )

Input password -----

Data Copy(Board replacement )

Input password -----

Data Copy(Board replacement )

Copy TV to Media Please wait for a while

Please do not remove the Media GETTING

Data Copy(Board replacement )

Data copy has been successful

Please remove Media FINISH

23

Data Copy from USB Memory to TV set 1. Turn on the TV set. 2. Insert USB Memory with Data to USB Terminal.

On-screen Display will be appeared according to the Data folder automatically. 3. Input a following password for (a) or (b) by using remote control.

(a) For Board replacement: 2771 (b) For Hotel: 4851

Data will be copied from USB Memory to TV set. 4. After the completion of copying to USB Memory, remove USB Memory from TV set.

(a) For Board replacement: Data will be deleted after copying (Limited one copy). (b) For Hotel: Data will not be deleted and can be used for other TVs.

5. Turn off the TV set. Note:

1. Depending on the failure of boards, function of Data for board replacement does not work. 2. This function can be effective among the same model numbers.

Input Password

Performing

Input Password 2771 or 4851

Performing

Completion

Performing

Data Copy(Board replacement )

Input password -----

Data Copy(Board replacement )

Copy Media to TV Please wait for a while

Please do not remove the Media WRITING

Data Copy(Board replacement )

Data copy has been successful

Please turn off the TV for system initializing FINISH

24

Option Bytes Description OPTION1 b1 TEXT Ch Refresh ON (1) / OFF (0)

b2 ID-1 ON (1) / OFF (0) b3 Macrovision Auto-judge ON (1) / OFF (0) b5 Reserved - b6 Enable HDMI force reset ON (1) / OFF (0) b7 Reserved -

OPTION2 b0 Adjust Igain enable ON (1) / OFF (0)

b1 A2 BG enable (5.5MHz) ON (1) / OFF (0) b2 A2 DK1 enable (6.26MHz) ON (1) / OFF (0) b3 A2 DK3 enable (5.742MHz) ON (1) / OFF (0) b4 NICAM scan ON (1) / OFF (0) b5 NICAM BG enable (5.5MHz) ON (1) / OFF (0) b6 NICAM I enable (6.0MHz) ON (1) / OFF (0) b7 NICAM DK enable (6.5MHz) ON (1) / OFF (0)

OPTION3 b0 NICAM priority ON (1) / OFF (0)

b1 Reserved - b2 Reserved - b3 A2 DK2 enable ON (1) / OFF (0) b4 Inhibition of countermeasure for SIF signal drop ON (1) / OFF (0) b5 Get onid from physical CH (CHINA) ON (1) / OFF (0) b6 SSU search enable for HOTEL model ON (1) / OFF (0) b7 SASO mute (ASIA) ON (1) / OFF (0)

OPTION4 b0 Countermeasure for Taiwan NTSC noise sound ON (1) / OFF (0)

b1 Enable Compatible with Video and Sound for Analog VIF ON (1) / OFF (0) b2 3DYC color motion detect ON (1) / OFF (0) b3 RF Clamp Current minimum (TAIWAN) ON (1) / OFF (0) b4 Reserved - b5 Reserved - b6 Reserved - b7 Enable workaround for Polsat CAM problem (POLAND) ON (1) / OFF (0)

OPTION16 b0 PIP (derivate models) ON (1) / OFF (0)

b1 Bass Boost sound menu enable (derivate models) ON (1) / OFF (0) b2 Digital Remaster sound menu enable (derivate models) ON (1) / OFF (0) b3 XR-Audio Pro Surround sound menu enabel (derivate models) ON (1) / OFF (0) b4 Ambience sound menu enable (derivate models) ON (1) / OFF (0) b5 Reserved - b6 Reserved - b7 Reserved -

25

Self Check How to access Self-check indication only: While pressing [VOLUME ( - )] button on the main unit, press [BLUE] button on the remote control. Self-check indication and forced to factory shipment setting: While pressing [VOLUME ( - )] button on the main unit, press [MENU] button on the remote control for more than 3 seconds.

How to exit Switch off the power with the [POWER] button on the main unit. Model ID

TX-65CZ950E TX-65CZW954 TX-65CZC954 TX-65CZR950 0C 03000101 00080000

0C 03000102 00080000

0C 03000102 00080000

0C 03000103 00080000

Display Ref. No. Description P.C.B. H14TUN TU6708 TUNER A/DVB-T/T2/C/(S)x2 A-Board H15TUN2 TU6708 TUNER A/DVB-T/T2/C/(S)x2 A-Board H90STBY IC1100 IC Genx8 A-Board H30AVSW IC3000 IC Brownie A-Board H07TEMP IC5900 TEMP. SENSOR A-Board H17LAN IC8600 Ethernet Controller A-Board H00FE IC6800 DVB-T2/T/C/S2/S Demodulator A-Board H00SAT-TU IC6803 DVB-T2/T/C/S2/S Demodulator A-Board H96ID IC8920 CI+,DTCP-IP, C2MOD A-Board H97ID2 IC8920 Dimora, HDCP2.2, Netflix, Widevine A-Board

H45BT IC8000 / IC8650 N5HZZ0000130 IC Peaks-Pro5 / USB HUB

BTDongle A-Board

BT Dongle

H42WIFI IC8000 / IC8650 N5HBZ0000109 IC Peaks-Pro5 / USB HUB

Wifi Dongle A-Board

Wifi Dongle H36GCX IC9500 IC Image Processor FR-Board H37GCX2 IC9600 IC Image Processor FR-Board H80HDMISW1 IC4512 HDMI SW A-Board H80HDMISW2 IC4510 HDMI SW(RIO IC SWITCH) A-Board H71TCON FRC-TCON FRC-TCON OLED PANEL

H18LAN2 IC8655/IC14000 Internall Ethernet Controller and MAC address for Easter A-Board

H84ID3 IC14000 DTCP-IP for Easter(MT5810) A-Board H91MEM1 IC8901 GenX8 EEP (checksum error) A-Board

If the CCU ports have been checked and found to be incorrect or not located then " - - " will appear in place of "O.K.".

TX-65CZ950E TX-65CZW954 TX-65CZC954 TX-65CZR950

Self Check Complete

H14TUN O.K. H15TUN2 O.K. H90STBY O.K. H30AVSW O.K. H07TEMP O.K. H17LAN O.K. H00FE O.K. H00SAT-TU O.K. H96ID O.K. H97ID2 O.K. H45BT O.K. H42WIFI O.K. H36GCX O.K. H37GCX2 O.K. H80HDMISW1 O.K. H81HDMISW2 O.K. H71TCON O.K. H18LAN2 O.K. H84ID3 O.K. H92MEM1 O.K.

PEAKS-SOFT *.***PEAKS-EEP **.**.**** LSI-PACKAGE *.*** LSI-RELEASE *.** STBY-SOFT *.**.** STBY-EEP *.**.**** STBY-ROMCOR *.**.** GCX DATA ******** DEC-SOFT *.*** DEC-EEP **.**.**** LSI-PACKAGE *.*** LSI-RELEASE *.** STBY-SOFT *.**.** STBY-EEP *.**.****

MODEL ID ** ******** ********

26

4 sec Once

Power LED blinking timing chart 1. Subject

Information of LED Flashing timing chart. 2. Contents

When abnormality has occurred the unit, the protection circuit operates and reset to the stand by mode. At this time, the defective block can be identified by number of blinking of the Power LED Red on the front panel of the unit.

Blinking times Blinking timing Contents Check point

1 Panel SOS OLED PANEL

2

EVDD(24V)_SOS

OLED PANEL P2 Board

7

SUB3.3V_SOS

A BOARD P2 Board

8

Power SOS P2 Board

9

SOUND SOS

A BOARD Speaker

10

GCX SOS

FR BOARD

13

EMERGENCY SOS A BOARD

Note: LED Flashes Orange - Panel adjustment in progress (This is not malfunction). It takes approximately 10 minutes (20 minutes max.). What is Panel adjustment function? The use of the OLED panel for a long period causes no uniformity of charge in each OLED cell and there is a possible cause of "image retention. To reduce the "image retention" Panel adjustment function is newly introduced for OLED models TX-65CZ950 series. When "image retention" is not reduced by this function it seems that the "image retention" is permanent due to deterioration of OLED cell. During the Panel adjustment period please avoid touching or exerting any pressure on the screen e.g. wiping the screen, etc. If the Panel adjustment has been completed LED lights Red or Orange (standby mode). The Panel adjustment function starts running automatically after switching off to standby if the TV has been in operation for at least 3 hours since the last panel adjustment. If the Panel adjustment has been interrupted before completion it will start again after the next switching off to the standby mode. How to activate Panel adjustment function manually: Step 1. Change from Home mode to Shop mode

1. MENU button on remote control is pushed and while selecting "Picture" in menu press Green button on remote control for more than 3 seconds.

2. OSD screen (Figure 18) is displayed. "Shop" is selected. Step 2. Pull out and insert the main plug. After TV turns on Panel adjustment function is activated. Step 3. Change from Shop mode to Home mode after finish this function. 1. OSD screen (Figure 18) is displayed according to the procedure of Step1. 2. Select Home mode Note: When TV has already been set to Shop mode the procedure of Step1 and Step3 is unnecessary.

No Light

Light

Fig.18

27

OLED Panel Test Mode Purpose: To find the possible failure point where in OLED Panel, FR board or A board when the abnormal picture is displayed. Procedure: Step 1. Go into OLED Panel test mode and confirm the symptom

While pressing [VOLUME ( - )] button of the main unit, press [YELLOW] button of the remote control three times within 2 seconds.

The several test patterns generated by OLED Panel are displayed. Judge by the following method: Still abnormal picture is displayed: The cause must be in OLED Panel. Exit test mode. Normal picture is displayed: The cause must be in A board or FR board. Go into FR test mode Step 2. Go into FR test mode and confirm the symptom During in OLED Panel test mode, press [OK] button on the remote control. The test pattern generated by FR board is displayed. Judge by the following method: Abnormal picture is displayed: The cause must be in FR board. Normal picture is displayed: The cause must be in A board. Step 3. Go into Additional OLED Panel test mode During in FR test mode, press [OK] button on the remote control. The several additional test patterns generated by OLED Panel are displayed. Result and Judgment are same as step 1. Step 4. How to Exit: Switch off the power with the [POWER] button on the main unit or the [POWER] button on the remote control in OLED

Panel test mode or FR test mode. Remarks: 1. During OLED Panel test mode and FR test mode, Power LED red and green are flashing alternately. 2. To display the test pattern in FR mode, input signal from HDMI, AV or antenna terminal. If no signal input, the test pattern wont be generated and no test pattern is displayed.

28

A-BO

ARD

FR-B

OAR

D

P2-B

OAR

D

PN-B

OAR

D

P1-B

OAR

DK-

BOAR

D

A20

WIF

I

BT

Wiring Diagram

CN

0100

CN

0101

CN

1300

3

CN

1300

4

CN

8731

SERVICE CONNECTORS SER

VIC

EC

ON

NEC

TOR

S

TU67

08TU

NER

HD

MI1

JK36

01

HD

MI2

JK36

02

HD

MI3

JK36

03

HD

MI4

JK36

04

AV s

cart

JK30

02

HP

JK33

80

DIG

ITA

L A

UD

IOO

UT

D32

00

CI S

LOT

2x

CN

8400

RS2

32C

JK38

50

ETH

ERN

ET

JK86

00

Y,Pb

,Pr

INA

UD

IO L

/R IN

JK30

01

A15

FR16

A16

FR15

A02

FR21

FR11

OLED PANEL

FR10

CN

9020

P5FR

20

P11

P21

P7 P6

P13

P23

PN50

FR50

A10

K10

GK-

BOAR

D

GK

1

S-BO

ARD

S1

CO

NFR

13

TWEE

TER

SPEA

KR

L

SP-L

SP-R

TWEE

TER

SPEA

KR

RJK

8651

USB

1

JK86

50JK

8652

USB

2U

SB3

[3.0

]

CN

10

CN

6

CN

11

CN

5

CN

9300

29

IC8401(C1ZBZ0004936)

DUAL CI CONTROLLER

IC8000[MN2WS0300PB]

Peaks Pro5

Block Diagram (1/3) A-Board (1/2)

A-BOARD[EXCHANGE UNIT]

CN0100Service

JK36

01

HD

MI1

JK36

02

HD

MI2

JK36

03

HD

MI3

HD

MI4

JK36

04

JK30

02

AV_VIN 11AV_VOUT 2

AV_RED/C 18

AV_GREEN 15

AV_BLUE 13

AV_LIN 7

AV_LOUT 5

AV_RIN 8

AV_ROUT 4

AV S

CA

RT

JK33

80

HP-

OU

T

RJK

3001

Y/V

in,P

B,P

RA

UD

IO IN L

R

Dig

ital

Aud

io O

ut

D32

00

CI SLOT (MAIN)CN8400

17,18 51,52

CI SLOT (SUB) 17,18 51,52

A15

A16

TO FR

15TO

FR16

3

7

9-10

A02

TO FR

21

10

11

7

14

44

45

1 - 4

9

13

A10

11

13

9

TO A

10-K10/B

T/CO

N(S1)/G

K1

8

4

7

6

5

14

2

JK3850RS232CETHERNET

JK8600

MX4

-

MX4

+

MX3

-

MX2

-

1 2 3 4 5 6 7 8

MX2

+

MX3

+

MX1

-

MX1

+

JK8652USB3

JK8650USB1

JK8651USB2

A20WIFICN8731

SERVICE

SUB

3.3V

DAT

A

TU

NER

DVB

-A/(T

2/C

/S)x

2

TU67

08

2

3,4

1,34

35

6,75

12

1132

30,31

8,9

10

25

17,18

33

20,211924

27

22,23

SUB3.3VREG_1.8V

DMD_SCL0_T DMD_SDA0_T

IFAGC1 TIFAGC

GPI01RST_X IC6800

[C1AB00004164] DVB-T/T2/C DEM

48

47

29

AF13 - AUDIO OUTPUT

IF1_P,N 37,38TAINP/TAINM

IF2_N,P B_TAINPB_TAINM

T1,T2N4

TIFAGC

Tuner/Dem

IFAGC2_T

IC3000C1AB00004175

BROWNIE

FE_XRST_T

RST XSIAIN,SQAIN

DEMOD_2_SCL/SDA

29

FE_XRST_T

IC6803[C1AB00004164] DVB-T/T2/C DEM

2931,32

4837,38

5,8,3,49,12,13,14,15,16

17

22,28,44,10

19,7

T2_FEF

DMD_SCL2_T DMD_SDA2_T

IFAGC1_S TIFAGCIF1_P,N_S IF1_P,N_S

EU_2ND_SDA/SCL

BISQ-Q1,I1_T

SU

B_C

I_5V

SU

B_C

I_5V

MA

IN_T

S_O

UT

MA

IN_T

S_IN

TS

IC8403-6 IC8503-4IC8407-8

SU

B3.

3V

SU

B5V

SU

B3.

3V

SU

B5V

SU

B_T

S_O

UT

SU

B_T

S_IN

TS

MA

IN_T

S_O

UT

SU

B_T

S_O

UT

MA

IN_T

S_IN

SU

B_T

S_IN

IC C

AR

DA

UD

IO IN

PUT

AU

DIO

OU

TPUT

BE C

OM

MO

N I/O

& IR

Q

SPI

SD C

AR

D I/F

1 3,5,7-12

TS DATA 1-7TS1 VALIDTS1 PSYNCTS1 DATA0TSI CLK

Parallel TS

TS INPUT

DMD_1.2/1.1V

SUB 3.3V

IIC_2

DEMOD_1SCL/SDA

20,21

45,46

20,21

31,32

AGCBS2_T 26

23

23

BISQ-Q2,I2_T

IC6876 LNB_PWR113

12,1616V

LNB_PWR16,7

DMD_SDA/SCL1_T

DMD_SDA_SCL1_T

3

DSQOUT_0IC6878 DSQ_SW

8

17

6 DSQOUT_1

SUB3.3V

16V

DSQOUT_1LNB_PWR2 IC6877

LNB1312,16 6,7

3

FE_SAT_XRST_T AH24 TS Input

26 EXT_AGCBS1_T

47T2_FEF1 T2_FEF1

DMD_1.2/1.1V

SUB3.3V

Parallel TSCH0_VAL,SYNC,CLK, DATACH1_CLK,VAL,PSYNC,DATA CH2_CLK,VAL,PSYNC

SIDE2_LIN_TERMINAL C12 SIDE2_RIN_TERMINAL C11

CMPY

CMPPB

CMPPR

YSYNCCMPY

Y8

Y9

Y10

Y4

Component

Audio IN

V1

SCART_R

SCART_G

SCART_B

R IN

L IN

L OUT

R OUT

B12

A12

Y15

AA2

A9

VOUT

B9

HP_L

HP_R

Y3 Composite

Y5

Y6

Y7

Scart

Audio IN

VDAC

VIDEO INPUT

IC3104Audio Amplifier

7

1

6

2

Audio Out

A8

B8

71 - RX2P5VDET 72 - RX1P5VDET

IC3320HP Amplifier

9

11

13

15

SUB9V

SUB3.3V

IC3102Video SW7

53

4

I2C (Digital Audio for SCART_out)AE11, AD13,AE13,AE12 Audio Output_AO2C10,D10,D9,D8 I2S(IN)

I2C (Digital Audio for HP_out) AK7,AJ6,AJ7,AH6 Audio Output_AO3D7,C8,C9,A7 I2S(IN)I2C (Aalog_AV Audio)_A1

AK3,AH5,AJ4 Audio Input_AI1B6,A6,C6 I2S(OUT)

H19,H20,J19,J20K19,K20,L19,L20

HDMI TX

SD VIDEO (IN) AA5,Y5-Y2,W7 Video OutputE13,D13,E14,D14,D15 RST_X

G2 AE2 Video Input Reset

A16,B16,C15 AH16,AG16,AF17 MCSSI SPI1

IC8875Level Shifter

6,4,5 11,13,12

MS0DIMS0DOMS0CLK

B15 SPI1 AE17 MCSSIMS0CS0

SPI_RXD,SYNC,SCLK(Teletext)AC5,AB5,AB6 SPI

SUB3.3VSUB1.8V

A15,E15,C14 SPI2

IIC_2E1,E3F2,F3

AG15,AH15

D3.3VD1.1VA3.3VA1.1V

AO1IEC

SUB3.3V

AJ8 Audio OutAO1IEC

P_R1HPD

HPDO0

5VDET0

DDCSDA0

CEC

1_RX 1_RX

R3613

DDCSCL0

CECPUL

CEC0 IC4512[MN864788]HDMI2.0 Rx

IC10000(MT5810PEHJ)

EASTERIC4510(MN7S504)

RIO

IC1100[MNZSFH9GAM1]

55,56,58,5961,62,64,65 RX2

80,81,83,8486,87,89,90 RX1

93,94,96,9799,100,102,103

22,24,25,27,2830,31,33,

W3,Y3,W4,Y4W5,V5,W6,Y6

P19,20;N19,20M19,25;L19,20K19,20;J19,20H19,20;G19,20

AU37,AV37,AR36AT36,AR35,AT35AU35,AV35,AR34AT34,AR33,AT33AU33,AV33,AR32

AT32

W11,Y11,W12Y12,W13,Y13

W14,Y14

A16,B16

A14

RIO

TXD

DC

SCL

RIO

TXD

DC

SDA

B14

R19,R20

V19,U18U20,T18

AN25,AL25

AP36,AM31AN30,AN31

CH0-7

TCON11,12

1,144TX

TX0DDCSCL0TX0DDCSDA0

RX0 TX0

42,43,45,4648,49,51,52 RX3

HPDO0STM_P31LCD_TV_SUB_ON1 STM_P41 52

55HPDO1 2 STM_P42

7 STM_PF3STM5VDET0

14 STM_PF1STM5VDET1

10 STM_PD0STMDDCSDA0

12 STM_PD2STMDDCSDA1

13 STM_PD3STMDDCSCL1

3 STM_P34STMHPDO2

23 STM_PF2

AL2

7A

D36

TCON

DDR I/FCH A/B/CeMMC

A9,B9,A10,B10A11,B11,A12,B12

R0D0P/NR0D1P/NR0D2P/NR0D3P/N

GPI

O

AUDIO

STM5VDET2

15 STM_PD4STMDDCSDA2

16 STM_PD5STMDDCSCL2

83 STM_P40STMHPDO3

100 STM_PF4STM5VDET3

M_GPIO50

M_OPCTRL20

96 STM_PD6STMDDCSDA3

97 STM_PD7STMDDCSCL3

41 STM_P10PWM_ENB

58 STM_P37DISPEN

99 STM_P64

11 STM_PD1STMDDCSCL0

95 STM_P76STMCEC073 STM_P02GCX_XRST

94 STM_PF0STMCEC0

73 - RX0P5VDET75 - RX3DDCSCL

106 - RX0DDCSDA107 - RX0DDCSCL70 - RX3P5VDET74 - RX3DDCSDA

104 - RX1DDCSDA 105 - RX1DDCSCL

HPDO1

5VDET1

DDCSDA1

CEC

2_RX

R3603

DDCSCL1

2_RX

ARCOUT

CECPUL

CEC0

ARCOUT P5

U29 eDP RX HPD

HPDO2

5VDET2

DDCSDA2

CEC

3_RX

R3633

DDCSCL2

3_RX

CECPUL

CEC0

HPDO3

5VDET3

DDCSDA3

CEC

4_RX

R3638

DDCSCL3

4_RX

CECPUL

CEC0

STB_I_0.9VSUB_M_0.9V SUB3.3V SUB_I_0.9V STB_I_1.8V SUB1.8V STB_I_1.5VHDMI_3.3V STB_I_1.2V

IC8920eMMC 4GB

IC14000eMMC 4GB

SUB

3.3V

SUB

1.8V

eMM

C C

AR

D I/F

DDR3 _ 4X4GBIC8200IC8201IC8202IC8203

DD

R I/F

SU

B1.

5V

DDR3 _ 5X4GBIC12000 IC12001IC12002 IC12003

IC12004 STB1.5V

SUB

5V MTK3.3V

IC8204

DC

DC

3.3V

2,6

3,8 4

STB_I_1.5V

5,7

VTT

VREF

RXD TX

D

IC3850RS232C

1716

1315

(STM

_P64

)H

OTE

L_SB

I(S

TM _

P63)

HO

TEL_

SBO

HOTEL_SBI

98 STM_P63HOTEL_SBO

36 STM_P23WOW_ON_IRQ

46 STM_P15WOW_ON_IRQ

1 2,3 5,6

IC86

54

SW

6 1

3 4

USB

5V

USB

1VB

US

USB

1OD

USB

1DP_

N

USB

1RXP

_N

8,9

USB

1TXP

_N

USB I/F

VIDEO

INPU

T

BE R

ESET

VIDEO

INPU

T

PCI e

I2C

BE C

OM

MO

N I/0

1 2 3

IC86

52

SW

6 1

3 4

USB

5VP_

VI1Y

5

OVC

UR

2

OVC

UR

2

DM

2

AF4

AF3

DP2

1 2 3

IC86

53

SW

6 1

3 4

USB

5VP_

VI1Y

6

OVC

UR

2

DM

1

DP1

DM

2

DP2

IC8650USB HUB

7 6 24

P_VI

1Y5

P_VI

1Y6

4 12 13 325

1 2 3

IC86

51

SW

6 1

3 4

STB

5V

4

VBU

S

STM

_P23

STM

_P04

STM

_P15

USB0DPUSB0DN

21

SUB

3.3V

5,9,14,21,28 10 11

X8650

16

15 BT_USBDN

BT_USBDP

15

BT_USBDP

BT_USBDN

BT_3.3V

R_LED_ON

G_LED_ON

AI_SENSOR

REMOTE

KEY

STB3.3V

SUB3.3V

POWER ON

P16V

STB5.3V

LCD_TV_SUB_ONPANEL_VCC_ON

TCON_ON

PANEL_MAIN_ON

SOS_PS

SOUND_SOS_DET

2,3;5,6;8,9;11,12;14,1517,18;20,21

23,24;26,2729,30;32,3335,36;38,39

41,42

R1D0P/N+1P/NT0D0P/N+1P/NT0AUXP/NT1D0P/NT1D1P/N

R1D2P/N;R1D3P/NT0D2P/N;T0D3P/NT1AUXP/NT1D2P/N;T1D3P/N

LOGO_ON

DISPEN

PWM ENB(OENB)

OFFRS_DONE

EVDD_DET

BL-SOS(PNL_SOS)

DCDCEN_3

46

4749

50

51

PG_ERXW

GCX_XRST

HOST_SDA

HOST_SCL

XECS2

ED(0-7)

ES(0-2)

G1_INTER1

1_INTER0

2_INTER1

2_INTER0

VODPVSYNC

PEAKS_GPIO

DCDC5V

AMREADY

TEMP-SENS_SCL

AMP_STBY

AMP_XRST

AO1D1

AO1D0

AO1LRCK

AO1BCK

AO1DACCK

TEMP-SENS_SDA

TCON_SDA 49

48

46

45

44

43

25,23,21

19

18

17

16

15

14

13

11

10

9

8

7

5

6

4

1

2

3

41,39,37,3533,31,29,27

47 TCON_SCL

IC8901EEPROM STM

STB3.3V49,50

STM_EEP_WP 51

IC5000[AN34043AAVF]ANALOG ASIC

1 6 2 14 31

STB

5V

STB

5V

RIO3.3VRIO1.2V

SU

B5V

SU

B9V

32

STB

3.3V

16V

OV

P

7DTV XRST

P X

RS

T

V24

V6

eDP R

X

T1,T2,R3,P4R2,R1,P2,P3

AS

IC-S

UB

ON

8

F25

G23

DC

DC

EN

11

DC

DC

EN

11

PE

AK

SR

ST

12

OV

P

16V

SUB

5V

USB

5V

USB

5V

STB_I_1.5V

STB_I_1.2V

SUB

_M_0.9 V

SUB

_I_0.9 V

SUB

1.8V

SUB

3.3V

MTK

3.3V

DC

DC

3.3V

LCD_TV_SUB_ON

M_DEMOD TSDATA6

Q8106Q8108

DC

DC

EN_2

B_H

DM

I

Q8104Q8105

DC

DC

EN_3

22

SP_H

P_M

UTE

53 SP_HP_MUTE 25

MO

N_M

UTE

54 MON_MUTE

HP

_MU

TE

23

EX

T_M

UTE

24

M_DEMOD_TSDATA5

AL27M_GPIO50

LCD_TV_SUB_ON

AD36M_OPCTRL20

R0D0P/NR0D1P/NR0D2P/NR0D3P/N

IC8882Level Shifter2

3

67

RIOTXDDCSCL

RIOTXDDCSDA

SCLASDAA

HDMI3.3V

SUB1.8V1

8

IC6600Level Shifter4

6

1113

M_DEMOD_TSDATA6

M_DEMOD_TSDATA5

P_XIRQ9P_XIRQ10

MTK3.3V

SUB1.8V1

16

IC8603Level Shifter

IC903C0JBAU000136

IC8655

IC8656

4

5,42,119

18,17

16,15

16,15

14,13

14,13

19,20

14,138,9 6,7

3,2

3P_XPERST

ETHER_RST

M_RXVN/P_1_N/P

M_TXVN/P_0_N/P

PERSTB

PHY3.3V

SUB1.8V1

SUB3.3V

SUB3.3V

23,32,12

1,6,12

SUB3.3VSUB1.8V1,8

6

P_PER0N/P

REF_CLK2_N/PP_PET0N/P

REF_CLK_N/PREF_CLK2_P/N

CLK_GEN_SCL/SDA

REF_CLK2_N/P

P_PECLKN/PCLK_GEN_SCLCLK_GEN_SDAP_SCL3P_SDA3

IC44004

3

SUB3.3V6 SUB1.8V1

AO1D2

P_XCMPREQ

U7

P_P

OR

T16(S

DA

A)

P_P

OR

T17(S

CLA

)

V2

P_X

IRQ

5

V3

P_X

IRQ

6

AA

29P

_XIR

Q2

Y26

P_X

IRQ

4

AB

3P

_VI1C

5

W2

P_X

IRQ

9W

1P

_XIR

Q10

W3

P_X

IRQ

8A

C7

P_X

IRQ

19V

26P

_PO

RT0

V25

P_P

OR

T1

AE

19P

_XP

ER

ST

AG

20A

H21

AB

25Y

24

AK

15A

J15

P_P

ER

0N/P

AJ21

AK

21P

_PE

R0N

/P

13

T8600

15 18 19 21 16 24 22

1 3 4 6 7 9 10 12

IC8600[C1CB00004130]

LAN CONTROLER

10 9 7 6 5 4 2 1

WO

L3.3

V

11,23

IC8602 STB5V

ETHER_RST

REF_CLK_P/N

19 16,15

P_SCL3

P_SDA

3

P_SDA

1P_SC

L1

IC8885Level Shifter5

34STM_P35

P_LPST

P_XIRQ8

SUB3.3V

SUB1.8V1

6

STM_P3556STM_P6517STM_P3051STM_P50(REMOTE)32

STM_P80 (AI)

G_LED_ON

84

6R_LED_ON5

STM_P81 KEY185

STM_P24 KEY337PANEL_VCC_ON229PANEL_MAIN_ON

BL_ON31STM_P62(SOS_PS)28SOUND_SOSDET27

STM_P21 BL_SOS34STM_P15 EVDD_DET46

STM_P17 LOGO_ON48

P_LPST

P_VI1HSYN

C

TIMER

AU

DIO

OU

TPUT

AE26

P_AO

1DA

CC

KA

K9

P_AO

1BC

KA

J10P_A

O1B

CK

AJ9

AK

10

AH

10

P_XERW

E1T24

AD

3

AO1D2

IC8409Logic IC

SU

B3.

3V

IC8880Level Shifter4

6

1311

PD_RXD1

PD_TXD1P_TXD0

P_RXD0

SUB3.3V

SUB1.8V1

16

P_SBI0/SBO0P_TXD1/RXD1

eDP RX eDP TX

P_AO

1D0

P_AO

1D1

30

A-Board (2/2)

A-BOARD[EXCHANGE UNIT]

16VIC11000

DC/DC

1712,23,26

SUB5V 10,15

MTK_SUB1.0V3DCDCEN_5

16V IC11001DC/DC 6

8 STB_1.5V1DCDCEN_4

1DCDCEN_2

MTK3.3V IC11002DC/DC 6

8 AVDD1.0V

SUB5V IC13001DC/DC 3

4 MT_STB3.3V

SUB5V IC3005DC/DC 3

2 D1.1V

A1.1V

RIO3.3VVDD3.3V

SUB5V IC4511DC/DC 3

2 RIO1.2V

SUB5V IC4513DC/DC 3

2 HDMI1.1V

P16V IC5200DC/DC 3

2 MTK3.3V

P16V IC4515DC/DC 3

2

7

DCDCEN_4 7

P16V IC5400DC/DC 6

8 SUB3.3VDCDCEN_2 1

P16V IC5420DC/DC 6

8 SUB5VDCDCEN_2 1

P16V IC5440DC/DC 8,7

2 USB5VDCDCEN 3

DCDCEN_3

SUB5V IC5705DC/DC 3

2 DMD_1.2/1.1V

DCDC3.3V[STB3.3V] IC8100

DC/DC 18 STB_I_0.9V

HDMI3.3V HDMISW3.3V

L4514AVDD3.3VL4513

AVDD3.3VRXL4515PVDD3.3VL4516

5

DCDCEN_3

DCDCIN[P16V] IC8101

DC/DC 85 SUB_M_0.9V

4

DCDCEN_3

DCDCIN[P16V] IC8102

DC/DC 32 STB_I_1.5V

7

DCDCEN_3

DCDCIN[P16V] IC8103

DC/DC 68 SUB_I_0.9V

1

DCDCEN

DCDCIN[P16V] IC8104

DC/DC 32 SUB1.8V

7

DCDCEN_3

DCDCEN

STB5V IC8105DC/DC 6

8 STB_I_1.2V

1

IC8402Reg

34M_1.2V

IC8410Reg

34M_3.3V

SUB3.3V

SUB5V

DCDC3.3VIC8970Regulator

STB5V 38

7

SUB3.3VIC2301Regulator

SUB5V34

L2000BT_3.3V

DCDC5VIC4200SUB5V 61

SUB3.3V IC5703Regulator 43

REG_1.8V

IC8106Regulator

51DCDC3.3V STB_I_1.8V

IC8400Regulator

5SUB_CI_5VSUB5V 1

WOL3.3VIC8602Regulator

SUB5V 54

16V PA2000 DCDCIN

STB5.3V VJ5400STB5V

31

G_P

1_R

X1,R

X0(P

,N)

G_P

0_R

X1,R

X0,T

X1,T

X0(P

,N)

G_C

K27

RX(

P,N

)

TO A15

FR16 6

ERXW

7

GC

X_XR

ST

8

FR15 1

TO A16

2

3 5

LOG

O_O

N

Block Diagram (2/3)

AE2

2

AF2

3

AF2

5

IC96

00[M

N85

064]

IMA

GE

PRO

CES

SOR

GC

X2-2

DIS

PEN

LO

GO

_ON

ES(

0-2)

ED

(0-7

)

ER

XW

XEC

S A

E11

AD

11

AF2

5 L

OG

O_O

N

ES(

0-2)

ED

(0-7

)

ER

XW

XEC

S

AD

12,A

E12,

AD

13,A

E13,

AF1

4,A

D14

,AE1

5

AD

15,A

E16,

AD

16

AE1

1

AD

11

IC95

00[M

N85

064]

IMA

GE

PRO

CES

SOR

G

CX2

-1

GC

X2 G

PI0

SYS

TEM

B

US

GC

X2 G

PI0

SYS

TEM

B

US

G_L

EDST

BY

G1

BL_

ON

_IN

PUT

AE2

7

BL_

ON

_IN

PUT

AE2

7

HO

ST_S

CL

HO

ST_S

DA

HO

ST_S

CL

HO

ST_S

DA

AF7

AE7

AF7

AE7

GC

X2 I2

C

GC

X2 I2

C e

DP_

RX1

,CLK

RX0

,TX0

RX0

FR11

18,1

9,21

,22

24,2

5,27

,28

30,3

1,33

,34

36,3

7,39

,40

AJ1

1,A

H11

,AK

12,A

J12

AK

13,A

J13,

AJ1

4,A

H14

AK

15,A

J15,

AK

16,A

J16

AJ1

7,A

H17

,AK

18,A

J18

V-B

y-O

ne

V-B

y-O

ne 8

Lan

e

PNL_TEST_ON

AD

28 G

CX2

GPI

0

FR10

2,3,

5,6,

8,9

,11,

12

14,

15,1

7,18

20,2

1,23

,24

26,

27

V-B

y-O

ne 8

Lan

e V

-By-

One

AJ1

9,A

H18

VB1LOCKN, VB1HTPDN

VB

1LO

CK

N, V

B1H

TPD

N

VB

1LO

CK

N, V

B1H

TPD

N

PN

L_TE

ST_O

N

DD

R3

2 x

2G

bit

1 x

1Gbi

tIC

9550

IC95

51IC

9552

DD

R3

GC

X2_1

.5V

DD

R3

GC

X SP

I FLA

SH

GC

X SP

I FLA

SH

TO P

AN

ELTO

PA

NEL

GC

X2_3

.3V

GC

X2_2

_1.5

VG

CX2

_C2_

1.1V

GC

X2_1

8_33

V

GC

X2_3

.3V

GC

X2_1

.5V

GC

X2_C

_1.1

VG

CX2

_18_

33V

GC

X_XR

ST G

CX2

RES

ET A

F9

CS

SO

SI SC

K

G-S

PIH

Z

5

HO

ST_S

DA

1_I

NTE

R1

AE1

7

AD

171_

INTE

R0

AE1

8PO

DPV

SYN

C

AD

24PE

AK

S_G

PIO

AE2

2

GC

X2 L

ED

CN9300

2 4 65 7

CS

SO

SI

SC

K

G-S

PIH

Z

IC91

00SP

I FLA

SH

1 2 5 6

CS

SO

SI

SC

K8

GC

X2_3

.3V

PA9450

IC97

01D

C/D

C3

2G

CX2

_1.5

V

7D

CD

CEN

IC93

00D

C/D

C3

2G

CX2

_3.3

V

7D

CD

CEN

FR21

11

9 1

0

1,4

7 TO

A02

10

14

29

30

FR-BOARD

DIS

PEN

DIS

PEN

OEN

B

OEN

B

AF2

3O

ENB

OFF

RS_

DO

NE

16V

6

EVD

D_D

ET

11

9

13

GC

X2 L

ED

7PN

L_SO

S

31

,32;

34,3

537

,38;

40,4

143

,44;

46,4

749

,50

G2_

P1_R

X1,R

X0(P

,N)

G2_

P0_R

X1,R

X0,T

X1,T

X0(P

,N)

G2_

CK

27R

X(P,

N)

eD

P_R

X1,C

LKR

X0,T

X0

10

,11;

13,1

416

,17;

19,2

022

,23;

25,2

628

,29

TX0

TX0

RX0

HO

ST_S

CL

GC

X_XR

ST G

CX2

RES

ET A

F9

XEC

S9

11

,13,

15,1

719

,21,

23,2

5

ED(0

-7)

AD

12,A

E12,

AD

13,A

E13,

AF1

4,A

D14

,AE1

5

27,2

9,31

ES

(0-2

)

AD

15,A

E16,

AD

16

1_IN

TER

133

GC

X2 IN

TER

1_IN

TER

034

2_

INTE

R1

35

2_IN

TER

036

2_I

NTE

R1

AE1

7

AD

172_

INTE

R0

GC

X2 IN

TER

VOD

PVSY

NC

37

VO

DP

SYN

C

AE1

8PO

DPV

SYN

C V

OD

P SY

NC

PEA

KS_

GPI

O38

AD

24PE

AK

S_G

PIO

39

GPI

O8

AE2

6

DC

DC

5V41

IC97

00D

C/D

C

1712

,23,

26G

CX2

_C_1

.1V

14D

CD

CEN

10,1

5D

CD

C5V

IC97

51D

C/D

C3

2G

CX2

_2_1

.5V

7D

CD

CEN

IC97

50D

C/D

C

1712

,23,

26G

CX2

_C2_

1.1V

14D

CD

CEN

10,1

5D

CD

C5V

IC93

50R

eg5

GC

X2_1

8_33

V1

V-B

y-O

ne

AJ1

1,A

H11

,AK

12,A

J12

AK

13,A

J13,

AJ1

4,A

H14

AK

15,A

J15,

AK

16,A

J16

AJ1

7,A

H17

,AK

18,A

J18

AJ1

9,A

H18

CN9020

10,1

1

1 4,5

8,9

6,7

GC

X2_S

BI0

, SB

O0

PAN

EL_S

CL,

SDA

HO

ST_S

CL,

SDA

GC

X1_S

BI0

, SB

O0

GC

X2_3

.3V

AE1

0,A

D10

GC

X2 S

ERIA

L G

CX2

_SB

I0, S

BO

0

AE1

0,A

D10

GC

X2 S

ERIA

L G

CX1

_SB

I0, S

BO

0

GPI

O8

DD

R3

2 x

2G

bit

1 x

1Gbi

tIC

9650

IC96

51IC

9652

GC

X2_1

.5V

42

TEM

P-SE

NS_

SCL

43

44

AM

P_ST

BY

AM

P_XR

ST45

A

O1D

246

47

A

O1D

1A

O1D

048

A

O1L

RC

K49

50

A

O1B

CK

51

AO

1DA

CC

K

TEM

P-SE

NS_

SDA

8D

CD

CEN

PNL_TEST_ON

AD

28 G

CX

GPI

0 P

NL_

TEST

_ON

32 EVDD_DET

40 PNL_SOS

41 EVDD_ON

42 OFFRS_DONE

STB5.3V

BL_ON_INPUT

SOUND_SOSDETSOS_PSTCON_ON

SUB_ON

FR20

11

9 1

0

6 5

TO P

5

1

19-22

8

11

11-14

STB5.3V

G_LEDSTBY

SUB_ONTCON_ONSOS_PS 2

G1

EVDD_ON PNL12V

F16V

16V

IC49

02[C

1AB

0000

3984

]A

UD

IO A

MP

8 7 6 5

9,1

625

,32

10,

11

14,

15

26,

27

30,

31

L- L+R+ R-

F16V

SP_L SP_R

A12

B 1 2 3 4

IC49

01[C

1AB

0000

3984

]A

UD

IO A

MP

8 7 6 5

9,1

625

,32

10,

11

14,

15

26,

27

30,

31

F16V

5 6 7

WoR

+

WoR

-

WoL

-

WoL

+ 8

WoL WoR

DC

DC

IN

IC49

03[C

1AB

0000

3984

]A

UD

IO A

MP

8 7 6 5

9,1

625

,32

10,

11

14,

15

26,

27

30,

31

F16V

5 6 7

WoR

+

WoR

-

WoL

-

WoL

+ 8

Tw L Tw R

AO

1DA

CC

K

AO

1BC

K

AO

1LR

CK

AO

1D0

AO

1D1

AO

1D2

17 18 24 17 18 24 17 18 24

AM

P_ST

BSO

UN

D_S

OSD

ETA

MP_

XRST

IC49

04TE

mp.

Sen

sor 4,

5

6 1

GCX2_3.3V

FR50 1

2

TO P

N50

5

16V

4

DCDC5V

TEMP_SENS_SDA

TEMP_SENS_SCL

IC40

00IC

Con

t.8

5G

CX2

_3.3

V

6

38

39 PANEL_SCL

PANEL_SDA

4

TC

ON

_SD

A3

T

CO

N_S

CL

23

TCON_SDA

TCON_SCL

3D

CD

CEN

G_LEDSTBY 4

32

Block Diagram (3/3)

GK-BOARD

GK

1

SW2855

SW2854

SW2853

SW2852

SW2851

KEY

3

TO A10

TO F

R50

S-BOARD

PN-BOARDS1 2

TO A10

TO A

10

K-BOARD

K10

23457

1

STBY 3.3V

SUB3.3V

DCDC5V

DCDC5V

RM2800

VCC OUT

SN2800AI

2

4

VCC

OUT

D2802R G

REMOTE

TMP_SENS_SDA

TMP_SENS_SCL AI

G LED

R LEDSUB3.3V

AI

STBY 3.3V

STBY 3.3V

R LED

G LED

REMOTE

SW2857

POW

ER_O

N

IC5901Reg

5T3.3V

IC5900TEMP SENS

1

56

1

PN50

2

45

33

Parts Location

4

5

3

1

9

10

(SWI)

44

13

50

51

52

46

47

48

49

45

14

15 SCREW THEC257J /8 pcs/

34

Parts Location

56

AC Cord Cover

2730

18

1916

FK201

55

FK202

31

23

Screw XTV3-8GFJK

FK213

FK210

FK203

FK211 FK214 FK215 FK212

FK216 FK217

FK218 FK220 FK219

FK206

FK207 FK208

FK209

Back side

Screw XTV3-8GFJK

23

55

35

Parts Location

LED panel Assy

LED Panel Assy

64

68

24

Bluetooth MODULE ASSY

Bluetooth Module Assy

12

34

Bottom Cover Assy

Bottom Cover Assy

17

33

21

356 6 36

Control Button Assembly

20 69

22

Control Button Assembly

28

GK_PCB

32

36

Parts Location

11

57

8

7

25

26

29 29 37 67 3737 65 66 37

82

63

60

58 5961

Back Side of Heatsink A-FR Bottom

Back Side of A-PCB

Screw THEJ036J /6pcs/

62

37

Location of Lead Wiring

A20

WIFI

2

A16FR15

53

A15FR16

74 54

FR20P5

70

P6

CN5

71 72

P7

CN11

S1

73

CON

A02FR21

A10

BT K10

GK1

75

FR10

CN6

76

CN10

77

FR11

FR13

78

FR50

PN50

79

P21 P11

80

P23

81

P13

38

Packing Structure

38

39

40

41

42

43

Cosmetic Cover Assy

TV Set

Pedestal Assy

39

Replacement Parts List Note Note: All parts except parts mentioned [PAVCCZ] in the Remarks column are supplied by AVC-CSPC. Parts mentioned [PAVCCZ] are supplied by PAVCCZ. Notice: Be sure to make your orders of replacement parts according to this list. RTL (Retention Time Limited) Note: The marking (RTL) indicates that the Retention Time is Limited for this item. After the discontinuation of this assembly in production, the item will continue to be available for a specific period of time. The retention period of availability is dependant on the type of assembly, and in accordance with the laws governing part and Abbreviation of part name and description 1. Resistor 2. Capacitor Example: Example: ERD25TJ104 C 100KOHM J 1/4W ECKF1H103ZF C 0.01UF Z 50V Type Allowance Type Allowance

Type Allowance

C : Carbon D :0.5% F : Fuse F :1% M : Metal Oxide G :2% Metal Film J :5% S : Solid K :10% W : Wire Wound M :20%

Type Allowance

C : Ceramic C :0.25pF E : Electrolytic D :0.5pF P : Polyester F :1pF Polypropylene G :3pF T : Tantalum J :5pF K :10pF L :15pF M :20pF P :+100%, -0% Z :+80%, -20%

40

Model No. : TX-65CZ950E TX-65CZW954 TX-65CZR950 TX-65CZC954 Parts List

Change Safety Ref. No. Part No. Part Name & Description Q'ty Remarks

1 BAT-C-0109 BATTERY COVER OF RC 1 PAVCCZ 2 K1HY05YY0184 USB CABLE 1 PAVCCZ 3 K1HY20YY0016 SCART CABLE 1 PAVCCZ

4 K2CL2YY00020 AC CORD 1 (TX-65CZ950E,TX-65CZR950,TX-65CZW954) PAVCCZ4 K2CR2YY00070 AC CORD (SWI) 1 (TX-65CZC954) PAVCCZ

5 K2KYYYY00227 AV CABLE 1 PAVCCZ 6 L0AA02B00007 TWEETER 2 PAVCCZ 7 L0EYBB000005 SPEAKER L 1 PAVCCZ 8 L0EYBB000006 SPEAKER R 1 PAVCCZ 9 N2QAYA000109 REMOTE CONTROL 1 PAVCCZ

10 N2QBYA000018 TOUCH PAD REMOTE CONTROL 1 PAVCCZ11 N5HBZ0000109 WIFI DONGLE 1 PAVCCZ12 N5HZZ0000130 BLUETOOTH DONGLE 1 PAVCCZ

13 N5ZZ00000284 3D GLASSES 1 PAVCCZ 14 TBL0E01421 PEDESTAL ASSY 1 PAVCCZ 15 TBL0E91101 STAND POLE 4 PAVCCZ

16 TBM0EC3801 MODEL LABEL 1 (TX-65CZ950E) PAVCCZ16 TBM0EC3821 MODEL LABEL 1 (TX-65CZW954) PAVCCZ16 TBM0EC3841 MODEL LABEL 1 (TX-65CZC954) PAVCCZ16 TBM0EC3851 MODEL LABEL 1 (TX-65CZR950) PAVCCZ

17 TBM0EU0411 POWER BUTTON INDICATION LABEL 1 PAVCCZ 18 TBM0EU0431 SIDE INDICATION LABEL 1 PAVCCZ 19 TBM0EU0441 BOTTOM INDICATION LABEL 1 PAVCCZ 20 TBM0EU0451 CONTROL BUTTON LABEL 1 PAVCCZ 21 TBX0E88000 POWER BUTTON 1 PAVCCZ 22 TBX0E88100 CONTROL BUTTON 1 PAVCCZ 23 TES0E107 SPRING MAGNET HOLDER 12 PAVCCZ 24 TKK0E93011 LED PANEL 1 PAVCCZ 25 TKP0EA03601 BOTTOM AV BRACKET 1 PAVCCZ 26 TKP0EA03701 SIDE AV BRACKET 1 PAVCCZ

27 TKP0EA03801 AC CORD COVER 1 PAVCCZ 28 TKP0EA03901 CONTROL BUTTON BRACKET 1 PAVCCZ 29 TKP5ZA52801 SP BRACKET UPPER 6 PAVCCZ

30 TKRA51702 BC HANDLE (BLACK) 2 PAVCCZ31 TKU0EC01701 REAR COVER 1 PAVCCZ32 TKU0EC01801 BOTTOM COVER 1 PAVCCZ

33 TMW0E9011 S-PCB HOLDER 1 PAVCCZ 34 TMX0EE0011 LED PANEL CASE 1 PAVCCZ 35 TMZ0E9928 SOUND REFLECTOR L 1 PAVCCZ 36 TMZ0E9929 SOUND REFLECTOR R 1 PAVCCZ 37 TMZ0E9930 STAND BRACKET 4 PAVCCZ

38 TPC0EA32901 CARTON TOP 1 PAVCCZ 39 TPC0EA33001 CARTON BOTTOM 1 PAVCCZ 40 TPD0E13991 CUSHION TOP 1 PAVCCZ 41 TPD0E23961 CUSHION BOTTOM 1 PAVCCZ 42 TPD0E51001 CUSHION FRONT 1 PAVCCZ 43 TPD0E51011 CUSHION REAR 1 PAVCCZ 44 TPZ0E1010 ACCESSORIES BOX TOP 1 PAVCCZ 45 TPZ0E1020 ACCESSORIES BOX BOTTOM 1 PAVCCZ 46 TPZ0E1030 3D GLASSES BOX 1 PAVCCZ 47 TPZ0E1040 REMOTE CONTROLLER BOX 1 PAVCCZ 48 TPZ0E1050 TOUCH PAD CONTROLLER BOX 1 PAVCCZ 49 TPZ0E1060 PARTITION A 1 PAVCCZ 50 TPZ0E1070 REMOTE CONTROLLER PARTITION 1 PAVCCZ 51 TPZ0E1080 TOUCH PAD CONTROLLER PARTITION 1 PAVCCZ 52 TPZ0E1090 PARTITION B 1 PAVCCZ 53 TSCKF0170193 FFC (51PIN) 1 PAVCCZ 54 TSCKF0630057 FFC (51PIN) 1 PAVCCZ 55 TSMD009 MAGNET 12 PAVCCZ 56 TTP0E0123 COSMETIC COVER ASSY 1 PAVCCZ 57 TUC0EJ50201 HEATSINK A-FR BOTTOM 1 PAVCCZ

41

Model No. : TX-65CZ950E TX-65CZW954 TX-65CZR950 TX-65CZC954 Parts List

Change Safety Ref. No. Part No. Part Name & Description Q'ty Remarks

58 TUC0EJ50211 HEATSINK FR TOP 1 PAVCCZ 59 TUC0EJ50221 HEATSINK FR TOP FIN 1 PAVCCZ 60 TUC0EJ50231 HEATSINK A TOP 1 PAVCCZ 61 TUC5ZJ51411 HEATSINK A-REAR 1 PAVCCZ 62 TUC5ZJ51711 HEATSINK PRO5 1 PAVCCZ 63 TUX0EX0071 WIFI METAL 1 PAVCCZ 64 TUX0EX0081 BT METAL 1 PAVCCZ 65 TUX0EX0091 FAN METAL 1 PAVCCZ 66 TUX0EX0101 VESA METAL LEFT 1 PAVCCZ 67 TUX0EX0111 VESA METAL RIGHT 1 PAVCCZ 68 TUX0EX0121 K-PCB METAL 1 PAVCCZ 69 TUX0EX0131 GK-PCB METAL 1 PAVCCZ 70 TXJ/P5RNVE FR20-P5 WIRE 1 PAVCCZ 71 TXJ/P6RNVE-1 P6-CN5 WIRE 1 PAVCCZ 72 TXJ/P7RNVE P7-CN11 WIRE 1 PAVCCZ 73 TXJ/S1RNVE S1-CON WIRE 1 PAVCCZ 74 TXJA02RNVE A02-FR21 WIRE 1 PAVCCZ 75 TXJA10RNVE A10-K10/BT/CON(S1)/GK1 WIRE 1 PAVCCZ 76 TXJF10RNVE FR10-CN6 WIRE 1 PAVCCZ 77 TXJF11RNVE FR11-CN10 WIRE 1 PAVCCZ 78 TXJF13RNVE FR13-SP WIRE 1 PAVCCZ 79 TXJF50RNVE FR50-PN50 WIRE 1 PAVCCZ

80 TXJP11RNVE P11-P21 WIRE 1 PAVCCZ 81 TXJP13RNVE P13-P23 WIRE 1 PAVCCZ

82 TZLP018RNVE OLED PANEL 1 PAVCCZ R03UE/2SA BATTERY 4 PAVCCZ TBM0EU0421 POWER BUTTON STICKER 1 PAVCCZ TBM4GU113 COVER LABEL 1 PAVCCZ THEC1509 SCREW 18 PAVCCZ THEC257J SCREW 8 PAVCCZ THEJ024 SCREW 16 PAVCCZ THEJ036J SCREW 48 PAVCCZ THTD037J SCREW M3X10 7 PAVCCZ TPDX0033 JOINT 4 PAVCCZ TPE0E4006 SET BAG 1 PAVCCZ TPE0E4097 SET BAG 1 PAVCCZ TQB0E2514 PRODUCT FICHE 1 (TX-65CZ950E) PAVCCZ

TQB0E2514A INSTRUCTION BOOK (GERMAN) 1 (TX-65CZ950E) PAVCCZTQB0E2514B INSTRUCTION BOOK (DUTCH) 1 (TX-65CZ950E) PAVCCZTQB0E2514C INSTRUCTION BOOK (ITALIAN) 1 (TX-65CZ950E) PAVCCZTQB0E2514D INSTRUCTION BOOK (FRENCH) 1 (TX-65CZ950E) PAVCCZTQB0E2514E INSTRUCTION BOOK (SPANISH) 1 (TX-65CZ950E) PAVCCZTQB0E2514F INSTRUCTION BOOK (SWEDISH) 1 (TX-65CZ950E) PAVCCZTQB0E2514G INSTRUCTION BOOK (NORWEGIAN) 1 (TX-65CZ950E) PAVCCZTQB0E2514H INSTRUCTION BOOK (FINNISH) 1 (TX-65CZ950E) PAVCCZTQB0E2514I INSTRUCTION BOOK (LITHUANIAN) 1 (TX-65CZ950E) PAVCCZTQB0E2514J INSTRUCTION BOOK (PORTUGUESE) 1 (TX-65CZ950E) PAVCCZTQB0E2514K INSTRUCTION BOOK (DANISH) 1 (TX-65CZ950E) PAVCCZTQB0E2514M INSTRUCTION BOOK (BULGARIAN) 1 (TX-65CZ950E) PAVCCZTQB0E2514N INSTRUCTION BOOK (ROMANIAN) 1 (TX-65CZ950E) PAVCCZTQB0E2514O INSTRUCTION BOOK (LATVIAN) 1 (TX-65CZ950E) PAVCCZTQB0E2514P INSTRUCTION BOOK (POLISH) 1 (TX-65CZ950E) PAVCCZTQB0E2514Q INSTRUCTION BOOK (HUNGARIAN) 1 (TX-65CZ950E) PAVCCZTQB0E2514R INSTRUCTION BOOK (CZECH) 1 (TX-65CZ950E) PAVCCZTQB0E2514S INSTRUCTION BOOK (GREEK) 1 (TX-65CZ950E) PAVCCZTQB0E2514T INSTRUCTION BOOK (TURKISH) 1 (TX-65CZ950E) PAVCCZTQB0E2514U INSTRUCTION BOOK (ENGLISH) 1 (TX-65CZ950E) PAVCCZTQB0E2514V INSTRUCTION BOOK (CROATIAN) 1 (TX-65CZ950E) PAVCCZTQB0E2514W INSTRUCTION BOOK (SLOVAKIAN) 1 (TX-65CZ950E) PAVCCZTQB0E2514Z INSTRUCTION BOOK (ESTONIAN) 1 (TX-65CZ950E) PAVCCZ

TQB0E2551 PRODUCT FICHE 1 (TX-65CZC954,TX-65CZW954) PAVCCZTQB0E2551A INSTRUCTION BOOK (GERMAN) 1 (TX-65CZC954,TX-65CZW954) PAVCCZ

42

Model No. : TX-65CZ950E TX-65CZW954 TX-65CZR950 TX-65CZC954 Parts List

Change Safety Ref. No. Part No. Part Name & Description Q'ty Remarks

TQB0E2551C INSTRUCTION BOOK (ITALIAN) 1 (TX-65CZC954,TX-65CZW954) PAVCCZTQB0E2551D INSTRUCTION BOOK (FRENCH) 1 (TX-65CZC954,TX-65CZW954) PAVCCZTQB0E2551L INSTRUCTION BOOK (RUSSIAN) 1 (TX-65CZC954,TX-65CZW954) PAVCCZTQB0E2651L INSTRUCTION BOOK (RUSSIAN) 1 (TX-65CZR950) PAVCCZ

TQF0EA849 ENERGY LABEL 1 (TX-65CZ950E,TX-65CZC954,TX-65CZW954) PAVCCZ XTV3+8GFJK SCREW 23 PAVCCZ XYN3+F8FJ SCREW 21 PAVCCZ XYN4+F14FNK SCREW(PEDESTAL) 8 PAVCCZ AL301 TEWF484 AL-PET TAPE(W3XL40XT0.085) 1 PAVCCZ AL302 TEWF483 AL TAPE(W10XL20XT0.05) 1 PAVCCZ AL303 TEWF138 AL-PET TAPE(W10XL30) 1 PAVCCZ AL304 TEWF138 AL-PET TAPE(W10XL30) 1 PAVCCZ CK301 TMME380 CLAMPER 1 PAVCCZ CK302 TMME268 CLAMPER 1 PAVCCZ CK303 TMME268 CLAMPER 1 PAVCCZ CK304 TMME268 CLAMPER 1 PAVCCZ CK306 TMME268 CLAMPER 1 PAVCCZ CK307 TMME343 CLAMPER 1 PAVCCZ CK308 TMME343 CLAMPER 1 PAVCCZ CK309 TMME343 CLAMPER 1 PAVCCZ CK310 TMME343 CLAMPER 1 PAVCCZ CK311 TMM16497-1 CLAMPER 1 PAVCCZ CK312 TMM16497-1 CLAMPER 1 PAVCCZ CK313 TMM16497-1 CLAMPER 1 PAVCCZ CK314 TMM15414-2 CLAMPER 1 PAVCCZ CK315 TMME415 SPACER 1 PAVCCZ CK316 TMME415 SPACER 1 PAVCCZ CK317 TMME415 SPACER 1 PAVCCZ CK318 TMME415 SPACER 1 PAVCCZ CK319 TMME415 SPACER 1 PAVCCZ CK320 TMME415 SPACER 1 PAVCCZ CK321 TMME415 SPACER 1 PAVCCZ CK322 TMME415 SPACER 1 PAVCCZ FK201 TMK0EA192 FELT(75X8XT0.5) 1 PAVCCZ FK202 TMK0EA352 FELT(10X10XT0.55) 1 PAVCCZ FK203 TMK0EA352 FELT(10X10XT0.55) 1 PAVCCZ FK204 TMK0EA084 FELT(75X12XT0.5) 1 PAVCCZ FK205 TMK0EA084 FELT(75X12XT0.5) 1 PAVCCZ FK206 TMK0EA146 FELT(15X20XT0.5) 1 PAVCCZ FK207 TMK0EA146 FELT(15X20XT0.5) 1 PAVCCZ FK208 TMK0EA146 FELT(15X20XT0.5) 1 PAVCCZ FK209 TMK0EA146 FELT(15X20XT0.5) 1 PAVCCZ FK210 TMK0EA177 FELT(270X10XT0.5) 1 PAVCCZ FK211 TMK0EA274 FELT(5X110XT0.5) 1 PAVCCZ FK212 TMK0EA274 FELT(5X110XT0.5) 1 PAVCCZ FK213 TMK0EA274 FELT(5X110XT0.5) 1 PAVCCZ FK214 TMK0EA419 FELT(20X10XT0.45) 1 PAVCCZ FK215 TMK0EA419 FELT(20X10XT0.45) 1 PAVCCZ FK216 TMK0EA419 FELT(20X10XT0.45) 1 PAVCCZ FK217 TMK0EA419 FELT(20X10XT0.45) 1 PAVCCZ FK218 TMK0EA433 FELT(250X10XT0.45) 1 PAVCCZ FK219 TMK0EA433 FELT(250X10XT0.45) 1 PAVCCZ FK220 TMK0EA433 FELT(250X10XT0.45) 1 PAVCCZ FK301 TMKK577 RUBBER (30X30X1) 1 PAVCCZ FK302 TMKK584 THERMAL CONDUCTIVE SHEET 1 PAVCCZ FK303 TMKK399 HEAT RUBBER (27X27XT3) 1 PAVCCZ FK304 TMKK399 HEAT RUBBER (27X27XT3) 1 PAVCCZ FK305 TMKK399 HEAT RUBBER (27X27XT3) 1 PAVCCZ FK306 TMKK399 HEAT RUBBER (27X27XT3) 1 PAVCCZ FK307