Production Scientifique 2009-2014 Groupe CERA Céramiques et Composites E1

ARTICLES dans des revues INTERNATIONALES – Comité de lecture – 2014

1. BELGHALEM H., HAMIDOUCHE M., GREMILLARD L., BONNEFONT G., FANTOZZI G. ‘Thermal shock resistance of two micro-structured alumina obtained by natural sintering and SPS’ Ceramics International 2014,Volume 40 (1), Part A, pp 619–627

2. BELHOUCHET, H., HAMIDOUCHE, M., TORRECILLAS, R., FANTOZZI, G. The non-isothermal kinetics of mullite formation in boehmite-zircon mixtures 2014 Journal of Thermal Analysis and Calorimetry, 116 (2), PP. 795-803.

3. BUI T.-T., BUI Q.-B. , LIMAM A., MAXIMILIEN S. Failure of rammed earth walls: From observations to quantifications’ Construction and Building Materials 2014, Volume 51, pp 295-302

4. BOUTERF A., ROUX S., HILD F., VIVIER G., BRAJE X., MAIRE E., MEILLE S., ‘Damage law identication from full eld displacementmeasurement: Application to four-point bending test for plasterboard’ European Journal of Mechanics - A/SOLIDS juin 2014 soumis

5. BOUVILLE, F., MAIRE, E., MEILLE, S., VAN DE MOORTÈLE B., STEVENSON, A.J., DEVILLE S. Strong, tough and stiff bioinspired ceramics from brittle constituents 2014 Nature Materials, 13 (5), PP. 508-514.

6. BOUZID, A., FANTOZZI, G. ‘Mechanical and dielectrical energy dissipation phenomena study in Lead Zirconate Titanate piezoelectric materials’ 2014 Advanced Materials Research, 895, pp. 274-279

7. CALVIE E., RETHORE J., JOLY-POTTUZ, L., MEILLE, S., CHEVALIER J. , GARNIER V., JORAND Y., ESNOUF C., EPICIER T., QUIRK J.B., MASENELLI-VARLOT K. 'Mechanical behavior law of ceramic nanoparticles from transmission electron microscopy in situ nano-compression tests’ Materials Letters 2014,Volume 119, pp;107-110

8. CASSIANO-GASPAR S., BAZER-BACHI D., CHEVALIER J., LECOLIER E., JORAND Y., ROULEAU L. ‘Novel extrudates based on the multiscale packing of alumina particles and boehmite or aluminophosphate binders’ Powder Technology 2014,Volume 255, pp. 74-79

9. KRUMEICH, F., WÖRLE, M., NESPER, R., HÖLAND, M., RITZBERGER, C., ROTHBRUST, F., CHEVALIER, J., RHEINBERGER, V.M., HÖLAND, W. Microstructure of a Ce 0.1 Zr 0.9 O 2- MgAl 2 O 4 ceramic matrix composite for use in dentistry (2014) Journal of the American Ceramic Society, 97 (5), PP. 1602-1609.

10. LALLEMANT L., ROUSSEL N., FANTOZZI G., GARNIER V., BONNEFONT G., DOUILLARD T., DURAND B., GUILLEMET-FRITSCH S., CHANE-CHING J.-Y., GARCIA-GUTIEREZ D., AGUILAR-GARIB J. ‘Effect of amount of doping agent on sintering, microstructure and optical properties of Zr- and La-doped alumina sintered by SPS’ Journal of the European Ceramic Society 2014, Volume 34 (5), pp. 1279-1288

11. MAILLET E., GODIN N. , R'MILI M., REYNAUD P., FANTOZZI G., LAMON J. ‘Damage monitoring and identification in SiC/SiC minicomposites using combined acousto-ultrasonics and acoustic emission’ Composites Part A: Applied Science and Manufacturing 2014,Volume 57, p. 8-15

12. MAILLET E., GODIN N. , R'MILI M., REYNAUD P., FANTOZZI G., LAMON J. ‘Real-time evaluation of energy attenuation: A novel approach to acoustic emission analysis for damage monitoring of ceramic matrix composites’ Journal of the European Ceramic Society 2014,Volume 34 (7), pp 1673-1679

13. TALLIA F., GALLO M., PONTIROLI L., BAINO, F., FIORILLI S., ONIDA B., ANSELMETTI G.C., MANCA A., VITALE-BROVARONE C. Zirconia-containing radiopaque mesoporous bioactive glasses 2014 Materials Letters, Volume130, pp. 281-284

14. CARDINAL S., QIAO J., PELLETIER JM, A gold-based bulk-solidifying amorphous alloy for jewelry. Comparison with a palladium-based amorphous alloy, Materials Science Forum Vols. 783-786 (2014) pp 1901-1906

2013

1. AMAN Y., ROSSIGNOL C., GARNIER V., DJURADO E., ‘Low temperature synthesis of ultrafine non vermicular α-alumina from aerosol decomposition of aluminum nitrates salts’. Journal of the European Ceramic Society , 2013, volume 33 (10) , pp. 1917-1928

2. ARIANPOUR F., REZAIE H.R., GOLESTANI FARD F., FANTOZZI G., MAZAHERI M., ‘Processing and consolidation of TaC/HfC based composites using MoSi 2 and carbon nanotubes’ Journal of Nano Research, 2013, Volume 21 , pp.144-150

3. BÈS R., GAILLARD C., MILLARD-PINARD N., GAVARINI S., MARTIN P., CARDINAL S., ESNOUF C., MALCHERE A., PERRAT-MABILON A. ‘Xenon behavior in TiN: A coupled XAS/TEM study’, Journal of Nuclear Materials, 2013, Volume 434 (1-3), pp. 56-64

4. CALVIÉ E., JOLY-POTTUZ L., ESNOUF C., DOUILLARD T., GREMILLARD L., MALCHÈRE A., CHEVALIER J., MASENELLI-VARLOT K., ‘Evidence for the formation of distorted nanodomains involved in the phase transformation of stabilized zirconia by coupling convergent beam electron diffraction and in situ TEM nanoindentation’. Acta Materialia, Volume 61 (1), pp. 174-182

5. CALVIÉ E., JOLY-POTTUZ L., ESNOUF C., DOUILLARD T., GREMILLARD L., MALCHÈRE A., MASENELLI-VARLOT K., ‘A global investigation into in situ nanoindentation experiments on zirconia: From the sample geometry optimization to the stress nanolocalization using convergent beam electron diffraction’. Journal of Microscopy, 2013 Volume 249(2), pp 99-110

6. CLEMENT P., MEILLE S., CHEVALIER J., OLAGNON C. Mechanical characterization of highly porous inorganic solids materials by instrumented micro-indentation Acta Materialia 2013, Volume 61 (18), pp. 6649-6660

7. CHEN Z., JI G., PRUD'HOMME N., ADDAD A., JI, V., CHEVALIER J., BERNARD-GRANGER G. ‘Stabilization of the tetragonal phase in large columnar zirconia crystals without incorporating dopants’, Scripta Materialia, 2013,volume 68 (8), pp. 559-562

8. COTTRINO S., JORAND Y., ADRIEN J., OLAGNON C. ‘Spray-drying of highly concentrated nano alumina dispersions’, Powder Technology 2013, Volume 237, pp. 586-593

9. • COTTRINO S., JORAND Y., MAIRE E., ADRIEN J. ‘Characterization by X-ray tomography of granulated alumina powder during in situ die compaction’, Materials Characterization 2013, Volume 81, pp111–123

10. GODIN N. , DESCHANEL S., R'MILI M., REYNAUD P., LAMON J., FANTOZZI G. ‘Acoustic emission signatures of damage mechanisms occuring during fatigue tests on CMC. Unsupervised and supervised classification of AE data’ (Identification de la signature acoustique des différents mécanismes d'endommagement lors d'essais de fatigue sur CMC Application de classificateurs supervisé et non supervisé) Revue des Composites et des Materiaux Avances 2013, Volume 23(1), pp85-98

11. GOUPIL G., BONNEFONT G., IDRISSI H., GUAY D., ROUE L. ‘Consolidation of mechanically alloyed Cu-Ni-Fe material by spark plasma sintering and evaluation as inert anode for aluminum electrolysis’ Journal of Alloys and Compounds 2013, Volume 580, pp. 256-261

12. GHERRAB M., GARNIER V., GAVARINI S., MILLARD-PINARD N., CARDINAL S. ‘Oxidation behavior of nano-scaled and micron-scaled TiC powders under air’ International Journal of Refractory Metals and Hard Materials 2013, Volume 41, pp. 590-596

13. GREMILLARD L., MARTIN L., ZYCH L., CROSNIER E., CHEVALIER J., CHARBOUILLOT A., SAINSOT P., ESPINOUSE, AURELLE J.-L. ‘Combining ageing and wear to assess the durability of zirconia-based ceramic heads for total hip arthroplasty’, Acta Biomaterialia, 2013, Volume 9 (7), pp 7545–7555

14. JAAFAR M., REVERON H., ESNOUF C., FANTOZZI G. ‘Highly creep-resistant alumina–SiC nanocomposites processed by spark plasma sintering’. Scripta Materialia 2013, Volume 68 (2), pp.134-137

15. KANSAL I., TULYAGANOV D.U., PASCUAL M.J., GREMILLARD L., MALCHERE A., FERREIRA J.M.F. ‘Sintering behaviour of diopside (CaOa·MgOa·2SiO 2)-fluorapatite (9CaOa·3P2O5a· CaF2) bioactive glass’, Journal of Non-Crystalline Solids 2013, Volume 380, pp.

17-24 16. LEPLAY P., RÉTHORÉ J., MEILLE S., BAIETTO MC., CHEVALIER J., MAIRE E., ADRIEN J.,

Three dimensional analysis of an in situ double-torsion test by X-ray Computed Tomography and Digital Volume Correlation, Experimental Mechanics, vol. 53, n°7, pp.1265-75, 2013

17. LOMBARDI M., GREMILLARD L., CHEVALIER J., LEFEBVRE L., CACCIOTTI I., BIANCO A., MONTANARO L., ‘A Comparative study between melt-derived and sol-gel synthesized 45S5 bioactive glasses’, Key Engineering Materials 2013, volume 541 , pp. 15-30

18. MAINJOT A.K., DOUILLARD T., GREMILLARD L., SADOUN M.J., CHEVALIER J. 3D-‘Characterization of the veneer-zirconia interface using FIB nano-tomography’, Dental Materials 2013, Volume 29(2), pp. 157-165

19. MAJOULET O., SANDRA F., BECHELANY M.C., BONNEFONT G., FANTOZZI G., JOLY-POTTUZ L., MALCHERE A., BERNARD S. , MIELE P. ‘Silicon-boron-carbon-nitrogen monoliths with high, interconnected and hierarchical porosity’, Journal of Materials Chemistry A, 2013, Volume 1 (36), pp 10991-11000

20. MALOU Z., HAMIDOUCHE M., BOUAOUADJA, N., CHEVALIER J., FANTOZZI G. ‘Thermal shock resistance of a soda lime glass’ Ceramics – Silikaty 2013, Volume 57 (1) pp.39-44

21. MARCHAT D., ZYMELKA M., COELHO C., GREMILLARD L., JOLY-POTTUZ L., BABONNEAU F., ESNOUF C., CHEVALIER J, BERNACHE-ASSOLLANT D. ‘Accurate characterization of pure silicon-substituted hydroxyapatite powders synthesized by a new precipitation route’ Acta Biomaterialia 2013, volume 9 (6) , pp. 6992-7004

22. MARCHAT D., BOUET G., LUECKGEN A., ZYMELKA M., MALAVAL L., SZENKNECT. S., DACHEUX N., BERNACHE ASSOLLANT D., CHEVALIER J.. ‘Physico-chemical characterization and in vitro biological evaluation of pure SiHA for bone tissue engineering application ‘Key Engineering Materials 2013, volume 529-530 (1), pp. 351-356

23. NAGLIERI V., PALMERO P., MONTANARO L., CHEVALIER J. ‘Elaboration of Alumina-Zirconia Composites: Role of the Zirconia Content on the Microstructure and Mechanical Properties’ Materials 2013, volume 6(5), 2090-210

24. PALMERO P., BONELLIA B., FANTOZZI G., SPINA G., BONNEFONT G., MONTANARO L., CHEVALIER J. ‘Surface and mechanical properties of transparent polycrystalline YAG fabricated by SPS’, Materials Research Bulletin 2013, Volume 48(7) pp 2589–2597

25. PELLETANT A., REVERON H., CHEVALIER J., FANTOZZI G., GUINOT F., BLANCHARD L., FALZON F. ‘Thermal expansion of β-eucryptite in oxide-based ceramic composites’. Journal of the European Ceramic Society, Volume 33 (3), pp.531-538

26. ROUCHIER S., FORAY G., GODIN N., WOLOSZYN M., ROUX J.-J. ‘Damage monitoring in fibre reinforced mortar by combined digital image correlation and acoustic emission’. Construction and Building Materials 2013, Volume 38, pp 371-380

27. ROUCHIER S., WOLOSZYN M., FORAY G., ROUX J.-J. 'Influence of concrete fracture on the rain infiltration and thermal performance of building facades’ International Journal of Heat and Mass Transfer, 2013, Volume 61, pp 340–352

28. ROUCHIER S., WOLOSZYN M., FORAY G., ROUX J.-J. ‘Characterisation of concrete and mortar cracking by digital image correlation and acoustic emission’ European Journal of Environmental and Civil Engineering 2013, Volume 17 (6), pp.467-477

29. ROUSSEL N., LALLEMANT L., CHANE-CHING J.-Y., GUILLEMET-FRISTCH S., DURAND

B., GARNIER V., BONNEFONT G., FANTOZZI G., BONNEAU L., TROMBERT S., GARCIA-GUTIERREZ D. ‘Highly dense, transparent α- Al2 O3 ceramics from ultrafine nanoparticles via a standard sps sintering’ Journal of the American Ceramic Society 2013, volume 96 (4) , pp. 1039-1042

30. SANON C., CHEVALIER J., DOUILLARD T., KOHAL R.J., COELHO P.G., HJERPPE J., SILVA N.R.F.A.’ Low temperature degradation and reliability of one-piece ceramic oral implants with a porous surface’, Dental Materials 2013, volume 29 (4) , pp. 389-397

31. SAINSOT P., GREMILLARD L., MARTIN L., ZYCH L., CROSNIER E., CHEVALIER J. , CHARBOUILLOT A., ESPINOUSE J., AURELLE J.-L. Combining ageing and wear to assess the

durability of zirconia-based ceramic heads for total hip arthroplasty, Acta Biomaterialia 2013 volume 9 (7), pp7545-7555

32. URIBE J., GERINGER J., GREMILLARD L., REYNARD B., ‘Degradation of alumina and zirconia toughened alumina (ZTA) hip prostheses tested under microseparation conditions in a shock device’ Tribology International 2013, Volume 63, pp151-157

2012

1. AMAN Y., GARNIER V., DJURADO E. ‘Pressure-less spark plasma sintering effect on non-conventional necking process during the initial stage of sintering of copper and alumina’. Journal of Materials Science, 2012, volume 47 (15) , pp. 5766-5773

2. APEL E., RITZBERGER C., COURTOIS N., REVERON H., CHEVALIER J., SCHWEIGER M., ROTHBRUST F., RHEINBERGER V.M., HÖLAND W. ‘Introduction to a tough, strong and stable Ce-TZP/MgAl 2O 4 composite for biomedical applications’. Journal of the European Ceramic Society, 2012, volume 32 (11), pp. 2697-2703

3. BALA Y., DEPALLE B., FARLAY D., DOUILLARD T., MEILLE S., FOLLET H., CHAPURLAT R., CHEVALIER J., BOIVIN G. ‘Bone micromechanical properties are compromised during long-term alendronate therapy independently of mineralization’. Journal of Bone and Mineral Research 2012, Volume 27(4), pp 825-834

4. BÈS R., GAVARINI S., MILLARD-PINARD N., CARDINAL S., PERRAT-MABILON A., PEAUCELLE C., DOUILLARD T. ‘Influence of crystallographic orientation on the early stages of oxidation of polycrystalline titanium nitride’. Journal of Nuclear Materials 2012, volume 427 (1-3), pp. 415-417

5. BIOTTEAU-DEHEUVELS K., ZYCH L., GREMILLARD L., CHEVALIER J. ‘Effects of Ca-, Mg- and Si-doping on microstructures of alumina-zirconia composites’. Journal of the European Ceramic Society, 2012, volume 32 (11), pp. 2711-2721

6. BONNEFONT G., FANTOZZI G., TROMBERT S., BONNEAU L. ‘Fine-grained transparent MgAl2O4 spinel obtained by spark plasma sintering of commercially available nanopowders’. Ceramics International, 2012, Volume 38 (1), pp. 131-140

7. CALVIÉ E., JOLY-POTTUZ L., ESNOUF C., CLÉMENT P., GARNIER V., CHEVALIER J., JORAND Y., MALCHÈRE A., EPICIER T., MASENELLI-VARLOT K., ‘Real time TEM observation of alumina ceramic nano-particles during compression’. Journal of the European Ceramic Society, 2012, Volume 32 (10), pp 2067-2071.

8. CHEVALIER J. ‘Papers presented at the 'Fracture and Reliability' symposium of Euromat 2011: Editorial comments’ Journal of the European Ceramic Society 2013 volume 32 (15) , pp. 3885

9. DJOURELOV N., AMAN Y., SILLOU D., NÉDÉLEC P. ‘Pore closure in spark plasma sintered alumina studied by variable energy positrons’. EPJ Applied Physics 2012, volume 57 (2) art. no. 20402

10. DOUILLARD T., CHEVALIER J., DESCAMPS-MANDINE A., WARNER I., GALAIS Y., WHITAKER P., WU J.J., WANG Q.Q. ‘Comparative ageing behaviour of commercial, unworn and worn 3Y-TZP and zirconia-toughened alumina hip joint heads’. Journal of the European Ceramic Society , 2012, Volume 32 (8), pp 1529-1540

11. ETIEMBLE A., IDRISSI H., MEILLE S., ROUÉ L. ‘In situ investigation of the volume change and pulverization of hydride materials for Ni-MH batteries by concomitant generated force and acoustic emission measurements’ (2012) Journal of Power Sources, 205, pp. 500-505.

12. FABRÈGUE D., PIALLAT J., MAIRE E., JORAND Y., MASSARDIER-JOURDAN V., BONNEFONT G. ‘Spark plasma sintering of pure iron nanopowders by simple route’ (2012) Powder Metallurgy, 55 (1), pp. 76-79.

13. FORAY G., CARDINAL S., MALCHERE A., PELLETIER J.-M. ‘Mechanical Spectroscopy, a Tool to Characterize Cement Latex Composites’ Solid State Phenomena 2012 volume 184 pp. 399-404.

14. FORAY G., DESCAMPS-MANDINE A., R'MILI M., LAMON J. ‘Statistical flaw strength distributions for glass fibres : Correlation between bundle test and AFM-derived flaw size density functions’. Acta Materialia 2012 volume 60 (9) , pp. 3711-3718

15. GOEL A., REDDY A.A., PASCUAL M.J., GREMILLARD L., MALCHERE A., FERREIRA J.M.F. ‘Sintering behavior of lanthanide-containing glass-ceramic sealants for solid oxide fuel cells’. Journal of Materials Chemistry 2012, volume 22 (19) pp. 10042-10054

16. ISSELE H., MERCIER D., VIGNOUD L., OLAGNON C., ‘Determination of the young's modulus of a TiN thin Film by Nanoindentation: Analytical models and FEM simulation’ e-Journal of Surface Science and Nanotechnology 2012, Volume 10, pp 624-629

17. KOLLI M., HAMIDOUCHE M., BOUAOUADJA N., FANTOZZI G., ‘Thermomechanical characterization of a fire clay refractory made of Algerian Kaolin’ Revue des Composites et des Matériaux Avances 2012, Volume 22 (3), pp. 71-84

18. LALLEMANT L., FANTOZZI G., GARNIER V., BONNEFONT G. ‘Transparent polycrystalline alumina obtained by SPS: Green bodies processing effect’. Journal of the European Ceramic Society 2012, Volume 32 (11), pp. 2909-2915

19. LAMON J., R’MILI M. ‘Resistance to fatigue at intermediate temperatures in air for SiC Hi -nicalon fibers: Statistical distributions of lifetimes and strength degradation’ Journal of the American Ceramic Society Volume 95 (11), pp. 3613-3621

20. LEPLAY P., RETHORE J., MEILLE S., BAIETTO M.-C. ‘Identification of asymmetric constitutive laws at high temperature based on Digital Image Correlation’. Journal of the European Ceramic Society 2012, volume 32 (15), pp. 3949-3958

21. LOMELLO F., BONNEFONT G., LECONTE Y., HERLIN-BOIME N., FANTOZZI G. ‘Processing of nano-SiC ceramics: Densification by SPS and mechanical characterization’. Journal of the European Ceramic Society 2012, Volume 32 (3), pp. 633-641

22. MAGALLANES-PERDOMO M., MEILLE S., CHENAL J.-M., PACARD E., CHEVALIER J. ‘Bioactivity modulation of Bioglass ® powder by thermal treatment’. Journal of the European Ceramic Society 2012, volume 32 (11) , pp. 2765-2775

23. MAILLET E., GODIN N., R’MILI M., REYNAUD P., LAMON J., FANTOZZI G. Analysis of ‘Acoustic Emission energy release during static fatigue tests at intermediate temperatures on Ceramic Matrix Composites: Towards rupture time prediction’. Composite Science and technology 2012, Volume 72 (9) , pp. 1001-1007

24. MAILLET E., GODIN N., R’MILI M., REYNAUD P., FANTOZZI G., LAMON J., FAYOLLE G. ‘Acoustic emission-based approach for lifetime prediction of CMCs during static fatigue tests at high temperature ‘[Analyse de la libération d'énergie des sources d'émission acoustique pour la prévision de la durée de vie de CMC lors d'essais de fatigue statique en température] Matériaux et Techniques, 2012, Volume 100 (6-7), pp. 631-641

25. MAZAHERI M., MARI D., SCHALLER R., FANTOZZI G. ‘High temperature mechanical spectroscopy study of 3mol% yttria stabilized tetragonal zirconia reinforced with carbon nanotubes’. Diffusion and Defect Data Part B: Solid State Phenomena 2012, volume 184, p 265-270,

26. MEILLE S., LOMBARDI M., CHEVALIER J., MONTANARO L. ‘Mechanical properties of porous ceramics in compression: On the transition between elastic, brittle, and cellular behavior’. Journal of the European Ceramic Society 2012, volume 32 (15) , pp. 3959-3967

27. MOMON S., GODIN N., REYNAUD P., R’MILI M., FANTOZZI G. Unsupervised and supervised classification of AE data collected during fatigue test on CMC at high temperature. Composites Part A: Applied Science and Manufacturing, 2012, Volume 43 (2), pp. 254-260

28. MONNIER T., DIA S., GODIN N. AND ZHANG F, ‘Primary calibration of AE sensors by the method of reciprocity. Theoretical and experimental considerations’, Journal of Acoustic Emission, Vol. 30 -152, 2012

29. MONTANARO L., PALMERO P., LOMBARDI M., ESNOUF C., CHEVALIER J., CARDINAL S. ‘Thermal analyses applied to ceramic nanopowders: from synthesis to sintering - A review on transition alumina powder-based materials (2012)’ Journal of Thermal Analysis and Calorimetry, pp. 1-9. Article in Press.

30. PALMERO P., FANTOZZI G., LOMELLO F., BONNEFONT G., MONTANARO L. ‘Creep behaviour of alumina/YAG composites prepared by different sintering routes’. Ceramics International 2012, Volume 38 (1), pp. 433-441

31. PELLETANT A., REVERON H., CHEVALIER J., FANTOZZI G., BLANCHARD L., GUINOT F., FALZON F. ‘Grain size dependence of pure β-eucryptite thermal expansion coefficient’. Materials Letters, 2012, Volume 66 (1), pp. 68-71

32. R'MILI M., GODIN N., LAMON J. ‘Flaw strength distributions and statistical parameters for ceramic fibers: The normal distribution’. Physical Review E - Statistical, Nonlinear, and Soft Matter Physics, 2012 volume 85 (5), art. no. 051106

33. ROUCHIER S., FORAY G., WOLOSZYN M., ROUX J.-J. ‘Influence of Diffuse Damage on the Water Vapour Permeability of Fibre-Reinforced Mortar’. Transport in Porous Media 2012, volume 93 (3) , pp. 543-559

34. ROUCHIER S., JANSSEN H., RODE C., WOLOSZYN M., FORAY G., ROUX J.-J., ‘Characterization of fracture patterns and hygric properties for moisture flow modelling in cracked concrete’. Construction and Building Materials, 2012, volume 34, pp. 54-62

35. SIBIL A., GODIN N., R'MILI M., MAILLET E., FANTOZZI G. ‘Optimization of acoustic emission data clustering by a genetic algorithm method’. Journal of Nondestructive Evaluation, 2012, volume 31 (2), pp. 169-180

36. SPINA G., BONNEFONT G., PALMERO P., FANTOZZI G., CHEVALIER J., MONTANARO L. ‘Transparent YAG obtained by spark plasma sintering of co-precipitated powder. Influence of dispersion route and sintering parameters on optical and microstructural characteristics’. Journal of the European 2012, Ceramic Society volume 32 (11), pp. 2957-2964

37. TAMPIERI A., CHEVALIER J., ENQVIST H., FERREIRA J. ‘Symposium on Bioceramics’ Journal of the European Ceramic Society 2012 volume 32 (11) , pp. 2661

2011

1. AMAN Y., GARNIER V., DJURADO E. ‘Spark Plasma Sintering Kinetics of Pure α-Alumina’ Journal of the American Ceramic Society, 2011, volume 94 (9) pp. 2825-2833

2. BALA Y., DEPALLE B., DOUILLARD T., MEILLE S., CLEMENT P., FOLLET H., CHEVALIER J., BOIVIN G. ‘Respective roles of organic and mineral components of human cortical bone matrix in micromechanical behavior: An instrumented indentation study’ Journal of the Mechanical Behavior of Biomedical Materials, 2011 Volume 4 (7), pp. 1473-1482

3. CHEVALIER J., LOH J., GREMILLARD L., MEILLE S., ADOLFSON E., ‘Low temperature degradation in zirconia with a porous surface’, Acta Biomaterialia, 2011, volume 7 (7), pp. 2986-2993

4. CHEVALIER J., TADDEI P., GREMILLARD L., DEVILLE S., FANTOZZI G., BARTOLOME J.F., PECHARROMAN C., MOYA J.S., DIAZ L.A., TORRECILLAS R., AFFATATO S. ‘Reliability assessment in advanced nanocomposite materials for orthopaedic applications’ Journal of the Mechanical Behavior of Biomedical Materials 2011, Volume 4 (3), pp 303-314

5. DEVILLE S., VIAZZI C., LELOUP J., LASALLE A., GUIZARD C., MAIRE E., ADRIEN J., GREMILLARD L. ‘Ice shaping properties, similar to that of antifreeze proteins, of a zirconium acetate complex’, PLoS ONE 2011, volume 6 (10), art. no. e26474

6. DEZELLUS O., ZHE M., BOSSELET F., ROUBY D., VIALA J.C. ‘Mechanical testing of titanium/aluminium-silicon interface: Effect of T6 heat treatment’. Materials Science and Engineering A 2011,Volume 528 (6), pp 2795-2803

7. DJOURELOV N., AMAN Y., BEROVSKI K., NÉDÉLEC P., CHARVIN N., GARNIER V., DJURADO E. ‘Structure characterization of spark plasma sintered alumina by positron annihilation lifetime spectroscopy ‘Physica Status Solidi (A) Applications and Materials 2011, Volume 208 (4), pp 795-802

8. GARMENDIA N., GRANDJEAN S., CHEVALIER J., DIAZ L.A., TORRECILLAS R., OBIETA I., ‘Zirconia-multiwall carbon nanotubes dense nano-composites with an unusual balance between crack and ageing resistance’ Journal of the European Ceramic Society 2011, Volume 31(6), pp. 1009-1014

9. GAVARINI S., BES R., MILLARD-PINARD N., CARDINAL S., PEAUCELLE C., PERRAT-MABILON A., GARNIER V., GAILLARD C. ‘A comparative study of TiN and TiC: Oxidation resistance and retention of xenon at high temperature and under degraded vacuum ‘Journal of Applied Physics 2011, Volume 109(1), Article number 014906

10. GINSAC N., CHENAL J.-M., MEILLE S., PACARD E., ZENATI R., HARTMANN D.J., CHEVALIER J. ‘Crystallization processes at the surface of polylactic acid-bioactive glass composites during immersion in simulated body fluid’ Journal of Biomedical Materials Research - Part B Applied Biomaterials, 2011 volume 99 B (2), pp. 412-419

11. HABCHI W., MATTA C., JOLY-POTTUZ L., DE BARROS M.I. , MARTIN J.M., VERGNE P. ‘Full film, boundary lubrication and tribochemistry in steel circular contacts lubricated with glycerol ‘Tribology Letters 2011, Volume 42 (3), pp 351-358

12. JOLY-POTTUZ L., BOGNER A., LASALLE A, MALCHERE A., THOLLET G., DEVILLE S., Improvements for imaging ceramics sintering in situ in ESEM, Journal of Microscopy, Volume 244 (1), 2011, PP. 93-100

13. LEPLAY P., RÉTHORÉ J., MEILLE S., BAIETTO M.-C. ‘Identification of damage and cracking behaviours based on energy dissipation mode analysis in a quasi-brittle material using digital image correlation’ International Journal of Fracture 2011, volume 171 (1), pp. 35-50

14. MALOU Z., HAMIDOUCHE M., BOUAOUADJA N., FANTOZZI G. ‘Statistical analysis of a sodalime glass thermal shock resistance’ Ceramics - Silikaty 2011, volume 55 (3), pp. 214-220

15. MAZAHERI M, MARI D., SCHALLER R., BONNEFONT G., FANTOZZI G. ‘Processing of yttria stabilized zirconia reinforced with multi-walled carbon nanotubes with attractive mechanical properties’ Journal of the European Ceramic Society 2011, volume 31 (14), pp. 2691-2698

16. MAZAHERI M., MARI D., HESABI Z.R., SCHALLER R., FANTOZZI G., ‘Multi-walled carbon nanotube/nanostructured zirconia composites: Outstanding mechanical properties in a wide range of temperature’ Composites Science and Technology Volume 71 (7), 2011, pp 939-945

17. PALMERO P., ESNOUF C. ‘Phase and microstructural evolution of yttrium-doped nanocrystalline alumina: A contribution of advanced microscopy techniques’ Journal of the European Ceramic Society 2011, Volume 31(4), pp. 507-516

18. R'MILI, M., LAMON J. Investigation of subcritical crack growth using load relaxation tests on fiber bundles Acta Materialia 2011, Volume 59 (7), pp. 2850-2857

19. REVERON H., BLANCHARD L., VITUPIER Y., RIVIÈRE E., BONNEFONT G., FANTOZZI G., ‘Spark Plasma Sintering of fine alpha-silicon nitride ceramics with LAS for spatial applications’ Journal of the European Ceramic Society 2011, Volume 31 (4), pp. 645-652

20. ROMERO DE LA OSA M., ESTEVEZ R., OLAGNON C., CHEVALIER J., TALLARON C. ‘Cohesive zone model for intergranular slow crack growth in ceramics : Influence of the process and the microstructure’ Modelling and Simulation in Materials Science and Engineering 2011, volume 19 (7), art. no. 074009

21. ROUSSEL N., LALLEMANT L., DURAND B., GUILLEMET S., CHING J.-Y.C., FANTOZZI G., GARNIER V., BONNEFONT G. ‘Effects of the nature of the doping salt and of the thermal pre-treatment and sintering temperature on Spark Plasma Sintering of transparent alumina’ Ceramics International 2011, volume 37 (8), pp. 3565-3573

22. SIBIL A, DOUILLARD T., CAYRON C., GODIN N., R’MILI M., FANTOZZI G. , ‘Microcracking of high zirconia refractories after t → m phase transition during cooling: an EBSD study’. Journal of european Ceramic society. 2011, volume 31 (9), pp. 1525-1531

23. VIGUIER E., BIGNON A., LAURENT F., GOEHRIG D., BOIVIN G., CHEVALIER J. ‘A new concept of gentamicin loaded HAP/TCP bone substitute for prophylactic action: In vivo pharmacokinetic study’. Journal of Materials Science: Materials in Medicine 2011, Volume 22 (4), pp. 879-886

24. XOLIN E., JORAND Y. , OLAGNON C., GREMILLARD L. Oxidation of φ′-aluminium oxynitride Corrosion Science 2011, Volume 53 (3), pp 939-945

2010

1. AMAN Y., GARNIER V., DJURADO E., ‘A screening design approach for the understanding of spark plasma sintering parameters: A case of translucent polycrystalline undoped alumina’ International Journal of Applied Ceramic Technology 2010 volume 7 (5), pp. 574-586

2. BELHOUCHET H., HAMIDOUCHE M., BOUAOUADJA N., GARNIER V. , FANTOZZI G. ‘Kinetics of mullite formation in zircon and boehmite mixture’ Annales de Chimie: Science des Matériaux 2010, volume 35(1), pp. 17-25

3. BERNARD-GRANGER G., ADDAD A., FANTOZZI G., BONNEFONT G. , GUIZARD C., VERNAT D., ‘Spark plasma sintering of a commercially available granulated zirconia powder: Comparison with hot-pressing’ Acta Materialia 2010, volume 58 (9), pp. 3390-3399

4. BES R., MILLARD-PINARD N., GAVARINI S., CARDINAL S. , GARNIER V. , KHODJA H., MALCHÈRE, A., MARTIN P., PEAUCELLE C. ‘Study of xenon thermal migration in sintered titanium nitride using nuclear micro-probe’ Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms 2010, volume 268 (11-12), pp. 1880-1883

5. BOUMCHEDDA K., AYADI A., AOUAROUN T., FANTOZZI G. ‘Study of vibratory behavior of interconnected porous PZT by impulse method’ Journal of the European Ceramic Society 2010, volume 30 (1), pp. 101-105

6. BOULORD C., KAMINSKI A., CANUT B., CARDINAL S., LEMITI, M. Electrical and structural characterization of electroless nickel-phosphorus contacts for silicon solar cell metallization (2010) Journal of the Electrochemical Society, 157 (7), pp. H742-H745.

7. CAYRON C., DOUILLARD T., SIBIL A., SAO-JAO S., FANTOZZI G., ‘Reconstruction of the cubic and tetragonal parent grains from electron backscatter diffraction maps of monoclinic zirconia’, Journal of the American Ceramic Society, 2010 volume 93 (9) , pp. 2541-254

8. CHALENCON F., ORGEAS L., DUMONT P.J.J., FORAY G., CAVAILLE J.-Y., MAIRE E., ROLLAND DU ROSCOAT S. ‘Lubricated compression and X ray microtomography to analyse the rheology of a fibre reinforced mortar’ Rheologica Acta 2010, volume 49 (3), p. 221235

9. FABREGUE D., PIALLAT J., MAIRE E., JORAND Y., MASSARDIER-JOURDAN V. ‘Nanograined size pure iron elaborated by means of spark plasma sintering’ Materials Science Forum 2010, volume 638-642, pp. 1691-1696

10. GREMILLARD L., GRANDJEAN S., CHEVALIER J. ‘A new method to measure monoclinic depth profde in zirconia-based ceramics from X-ray diffraction data’. International Journal of Materials Research 2010, volume 101 (1), pp. 88-94

11. JAAFAR M., BONNEFONT G., FANTOZZI G., REVERON H. ‘Intergranular alumina-SiC micro-nanocomposites sintered by spark plasma sintering’ Materials Chemistry and Physics 2010, Volume 124 (1), pp. 377-379

12. JOLY-POTTUZ L., BUCHOLZ E.W., MATSUMOTO N., PHILLPOT S.R., SINNOTT S.B., OHMAE N., MARTIN J.M. ‘Friction properties of carbon nano-onions from experiment and computer simulations’ Tribology Letters 2010, volume 37 (1), pp. 75-81

13. KENFAUI, D., BONNEFONT G., CHATEIGNER, D., FANTOZZI G., GOMINA, M., NOUDEM, J.G. ‘Ca3Co4O9 ceramics consolidated by SPS process: Optimisation of mechanical and thermoelectric properties ‘(2010) Materials Research Bulletin, 45 (9), pp. 1240-1249

14. KOLLI M., MADJOUBI M.A., HAMIDOUCHE M., BOUAOUADJA N., FANTOZZI G. ‘Strength

and optical transmission improvement of a sandblasted glass by chemical treatment in HF Hydrofluoric acid’ Annales de Chimie: Science des Materiaux, 2010, Volume 35(2), pp. 129-136

15. LAASRI S., TAHA M., LAGHZIZIL A., HLIL E.K., CHEVALIER J. ‘The affect of densification and dehydroxylation on the mechanical properties of stoichiometric hydroxyapatite bioceramics’ Materials Research Bulletin 2010, Volume 45(10), pp. 1433-1437

16. LEPLAY P., RETHORE J., MEILLE S., BAIETTO M.-C. ‘Damage law identification of a quasi brittle ceramic from a bending test using Digital Image Correlation’ Journal of the European Ceramic Society volume 30 (13), pp. 2715-2725, 2010

17. MÈGE-REVIL A., STEYER P., CARDINAL S., THOLLET G., ESNOUF C., JACQUOT P., STAUDER B. ‘Correlation between thermal fatigue and thermomechanical properties during the oxidation of multilayered TiSiN nanocomposite coatings synthesized by a hybrid

physical/chemical vapour deposition process ‘Thin Solid Films 518 2010, (21), pp. 5932-5937 18. MOMON S., MOEVUS M., GODIN N., R'MILI M., REYNAUD P., FANTOZZI G., FAYOLLE,

G. ‘Acoustic emission and lifetime prediction during static fatigue tests on ceramic-matrix-composite at high temperature under air’ Composites Part A: Applied Science and Manufacturing 2010, volume 41 (7), pp. 913-918

19. NAGLIERI V., JOLY-POTTUZ L., CHEVALIER J., LOMBARDI M., MONTANARO L. ‘Follow-up of zirconia crystallization on a surface modified alumina powder’ Journal of the European Ceramic Society 2010, volume 30 (16), pp. 3377-3387

20. ONODERA T., MORITA Y., NAGUMO R., MIURA R., SUZUKI A., TSUBOI H., HATAKEYAMA N., ENDOU A., TAKABA H., DASSENOY F., MINFRAY C., JOLY-POTTUZ

L., KUBO M., MARTIN J.-M., MIYAMOTO A. ’A computational chemistry study on friction of h-MoS2; Part II. Friction anisotropy’ Journal of Physical Chemistry B 2010, Volume 114 (48), pp. 15832-15838

21. PEROGLIO M., GREMILLARD L., EGLIN D., LEZUO P., ALINI M., CHEVALIER J. ‘Evaluation of a new press-fit in situ setting composite porous scaffold for cancellous bone repair: Towards a "surgeon-friendly" bone filler?’ Acta Biomaterialia 2010, volume 6 (9), pp. 3808-3812

22. PEROGLIO M., GREMILLARD L., GAUTHIER C., CHAZEAU L., VERRIER S., ALINI M., CHEVALIER J. ‘Mechanical properties and cytocompatibility of poly(ε-caprolactone)- infiltrated biphasic calcium phosphate scaffolds with bimodal pore distribution’ Acta Biomaterialia 2010, volume 6 (11), pp. 4369-4379

23. REVERON H., ZAAFRANI O., FANTOZZI G. ‘Microstructure development, hardness, toughness and creep behaviour of pressureless sintered alumina/SiC micro-nanocomposites obtained by slip-casting’ Journal of the European Ceramic Society 2010, Volume 30 (6), pp 1351-1357

24. RIGAUD E., PERRET-LIAUDET J., BELIN M., JOLY-POTTUZ L., MARTIN J.M., ‘An original dynamic tribotest to discriminate friction and viscous damping’, Tribology International, 2010, vol. 43 (1-2), pp. 320-329

25. ROUALDES O. , DUCLOS M.-E. , GUTKNECHT D., FRAPPART L., CHEVALIER J. HARTMANN D.J. ‘In vitro and in vivo evaluation of an alumina-zirconia composite for arthroplasty applications’ Biomaterials 2010, Volume 31 (8), pp. 2043-2054

26. SANAHUJA J., DORMIEUX L., MEILLE S., HELLMICH C., FRITSCH A., ‘Micromechanical explanation of elasticity and strength of gypsum: from elongated anisotropic crystals to isotropic porous polycrystals’, Journal of Engineering Mechanics 2010, volume 136 (2), article n° 011002QEM pp. 239-253

27. SCITI D., BONNEFONT G., FANTOZZI G., SILVESTRONI L. ‘Spark plasma sintering of HfB2 with low additions of silicides of molybdenum and tantalum’ Journal of the European Ceramic Society 2010, Volume 30 (15), pp. 3253-3258

28. SHAIRA M., GUY P., COURBON J., GODIN N. Monitoring of martensitic transformation in austenitic stainless steel 304L by eddy currents (2010) Research in Nondestructive Evaluation, volume 21 (2), pp. 112-126.

29. SHATOKHA V., KOROBEYNIKOV I., MAIRE E., GREMILLARD L., ADRIEN J. ‘Iron ore sinter porosity characterisation with application of 3D X-ray tomography’ Ironmaking and Steelmaking Volume 37 (5), pp. 313-319 2010

2009 1. AMAN Y., GARNIER V., DJURADO E. ‘Influence of green state processes on the sintering

behaviour and the subsequent optical properties of spark plasma sintered alumina’ Journal of the European Ceramic Society 2009, volume 29 (16), pp 3363-3370

2. BELHOUCHET H., HAMIDOUCHE M., BOUAOUADJA N., GARNIER V., FANTOZZI G. ‘Elaboration and characterization of mullite-zirconia composites from gibbsite, boehmite and zircon’ Ceramics-Silikaty 2009, Volume 53 (3), pp 205-210

3. CARDINAL S., MALCHERE A., GARNIER V., FANTOZZI G. ‘Microstructure and mechanical properties of TiC-TiN based cermets for tools application’. International Journal of Refractory Metals and Hard Materials, 2009, Volume 27(3) pp.521-527

4. CELLARD A., GARNIER V., FANTOZZI G., BARET G., FORT P. ‘Wear resistance of chromium oxide nanostructured coatings’. Ceramics international, 2009,Volume 35(2) pp.913-916

5. CHALENCON F., ORGEAS L., DUMONT P., FORAY G., CAVAILLE JY, ‘Rheology of fibre-reinforced cement pastes during lubricated compression tests’. Acta rheologica 2009, Volume 48 (8) pp. 925-942

6. CHEVALIER J., GRANDJEAN S., KUNTZ M., PEZZOTTI G. ‘On the kinetics and impact of tetragonal to monoclinic transformation in an alumina/zirconia composite for arthroplasty applications’ Biomaterials 2009, Volume 30 (29), pp 5279-5282

7. CHEVALIER J., GREMILLARD L. ‘Ceramics for medical applications: A picture for the next 20 years’. Journal of the European Ceramic Society, 2009, Volume 29 (7) pp.1245-1255.

8. CHEVALIER J., GREMILLARD L., VIRKAR A.V., CLARKE D.R. ‘The tetragonal-monoclinic transformation in zirconia: Lessons learned and future trends’ Journal of the American Ceramic Society 2009, Volume 92 ( 9), pp 1901-1920

9. DESCHANEL S., VANEL L., VIGIER G., GODIN N., CILIBERTO S., Experimental study of crackling noise: conditions on power law scaling correlated to fracture precursors, Journal of Statistical Mechanics : Theory and experiments, Article Number: P01018 Published: JAN 2009

10. FANTOZZI G., REYNAUD P. ‘Mechanical hysteresis in ceramic matrix composites’ Materials Science and Engineering A 2009,Volume 521-522, pp. 18-23

11. GAVARINI S., BES R., PEAUCELLE C., MARTIN P., ESNOUF C., TOULHOAT N., CARDINAL S., MONCOFFRE N.A, MALCHERE A., GARNIER V., MILLARD-PINARD N., GUIPPONI C. ‘Caesium isothermal migration behaviour in sintered titanium nitride: New data and comparison with previous results on iodine and xenon’ Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms 2009, volume 267(11), pp.1942-1947

12. GODIN N., CHAKI S., COURBON J., DESCHANEL S., S. GILLET, B. GAUTIER, Acoustic emission potentialities for characterization of Mullins effect in natural rubber materials filled with carbon black. Polymer Testing, Volume: 28 Issue: 1,2009, pp.103-105

13. GULAMOVA D.D., USKENBAEV D.E., FANTOZZI G., CHIGVINADZE J.G., MAGRADZE O.V. ‘Phase composition and properties of superconducting ceramics based on Bi1.7Pb0.3Sr2Ca2Cu3Oy precursors fabricated by melt quenching in a solar furnace’ Technical Physics 2009, Volume 54 (6), pp. 860-864

14. HIZEBRY A., SAADAOUI M., EL ATTAOUI H., CHEVALIER J., FANTOZZI G. ‘R-curve and subcritical crack growth in lead zirconate titanate ceramics’. Materials Science and Engineering 2009, Volume 499 (1-1), pp.368-373

15. JOLY-POTTUZ L., MARTIN J.M., DE BARROS BOUCHET M.I., BELIN M. ‘Anomalous low friction under boundary lubrication of steel surfaces by polyols’. Tribology Letters 2009, Volume 34 (1), SPEC. ISS., pp. 21-29

16. KOLLI M., HAMIDOUCHE M., BOUAOUADJA N., FANTOZZI G. ‘HF etching effect on sandblasted

soda-lime glass properties ‘Journal of the European Ceramic Society 2009, volume 29 (13), pp. 2697-2704 17. LATASTE E., ERAUW J.P., OLAGNON C., FANTOZZI G. ‘Microstructural and mechanical

consequences of thermal cycles on a high zirconia fuse-cast refractory’. Journal of the European Ceramic Society, 2009. volume 29 (4). pp.587-594

18. LOPEZ-ESTEBAN S., GUTIERREZ-GONZALEZ C.F., GREMILLARD L., SAIZ E., TOMSIA A.P. ‘Interfaces in graded coatings on titanium-based implants’. Journal of Biomedical Materials Research 2009, volume 88 (4), pp.1010-1021

19. MORALES RODRIGUEZ A, REYNAUD P., FANTOZZI G., ADRIEN J., MAIRE E. ‘Porosity analysis of long-fiber-reinforced ceramic matrix composites using X-ray tomography’. Scripta materialia 2009, volume 60 (6), p.388-390

20. ONODERA T , MORITA Y, SUZUKI A, KOYAMA M, TSUBOI H, HATAKEYAMA N, ENDOU A, TAKABA H, KUBO M , DASSENOY F , MINFRAY C , JOLY-POTTUZ L, MARTIN JM, MIYAMOTO A, ‘A Computational Chemistry Study on Friction of h-MoS2. Part I. Mechanism of Single Sheet Lubrication ‘Journal of physical chemistry B 2009, volume 113 (52) pp.16526-16536

21. PALMERO P., LOMBARDI M., MONTANARO L., AZAR M., CHEVALIER J., GARNIER V., FANTOZZI G. ‘Effect of heating rate on phase and microstructural evolution during pressureless sintering of a nanostructured transition alumina’. International Journal of Applied Ceramic Technology 2009. volume 6 (3) p.420-430

22. PALMERO P., NAGLIERI V., CHEVALIER J., FANTOZZI G., MONTANARO L. ‘Alumina-based nanocomposites obtained by doping with inorganic salt solutions: Application to immiscible and reactive systems’. Journal of the European Ceramic Society, 2009. volume 29 (1). pp.59-66

23. RODRIGUEZ SUAREZ T., LOPEZ-ESTEBAN S., PECHARROMAN C., MOYA J.S, EL ATTAOUI H., BENAQQA C., CHEVALIER J. ‘Slow crack growth resistance and bridging stress determination in alumina-rich magnesium aluminate spinel/tungsten composites’. Acta materialia 2009, volume 57(7). pp.2121-2127

24. ROMERO DE LA OSA M., ESTEVEZ R. , OLAGNON C., CHEVALIER J., CHARLES Y. VIGNOUD L., TALLARON C. ‘Modelling of environmentally assisted crack growth in ceramics’. Mechanics of Advanced Materials and Structures 2009, volume 16 (8), pp 623-631

25. ROMERO DE LA OSA M., ESTEVEZ R., OLAGNON C., CHEVALIER J., VIGNOUD L., TALLARON C. ‘Cohesive zone model and slow crack growth in ceramic polycrystals’. International Journal of Fracture 2009, volume 158 (2), pp. 157-167

26. YY SIBIL A., ERAUW J.P., CAMBIER F., R'MILI M., GODIN N., FANTOZZI G. ‘Study of damage of high zirconia fused-cast refractories by measurement of Young's modulus’ Materials Science and Engineering A2009, volume 521-522, pp 221-223

CONFERENCES INVITEES: 2014 :

1. J. CHEVALIER, Perspectives on zirconia as a bioceramic: past, present and future. 43rd Annual Meeting & Exhibition of the American Association for Dental Research (AADR), 19-22 mars 2014, Charlotte, USA.

2. J. CHEVALIER, Matériaux implantables, vers de nouvelles voies ? Journée ‘Innovez dans les implants’, Cetim, 27 mai 2014, Saint-Etienne, France.

3. L. GREMILLARD, PREISS L., MARTIN L., KOHAL R., SPIES B., CHEVALIER J., Multi-physic degradation mechanisms of zirconia and alumina-zirconia composites for implants: interactions between wear and hydrothermal ageing, 38th ICACC, Daytona Beach, Florida, 26-31 janvier 2014.

4. N. GODIN, MORIZET N., TANG J., FREGONESE M., NORMAND B., Apport de la transformée en ondelettes et de classification supervisée par "Random Forest" à la détection par émission acoustique de la corrosion localisée, 45èmes Journées d’études de cinétique hétérogène, Bordeaux le 03 et 04 avril 2014.

2013 :

1. CHEVALIER J., GREMILLARD L., REVERON H., PALMERO P., MONTANARO L. Ceramics for orthopaedic and dental applications : the quest towards tough, strong and stable nano-structured composites. Fifth International Conference on Shaping of Advanced Ceramics, 29-31 January 2013, Mons (Belgium)

2. CHEVALIER J. Connaissances fondamentales sur la zircone : élaboration, propriétés, durabilité. Journées annuelles de la Société Française des Biomatériaux Dentaires, 24-25 Juin 2013, Avignon.

3. CHEVALIER J. Matériaux céramiques et composites pour le comblement osseux et l'ingénierie Tissulaire. Journées annuelles de la Société Française des Biomatériaux Dentaires, 24-25 Juin 2013, Avignon.

4. CHEVALIER J. Ceramics for medical applications: from joint prostheses to tissue engineering, Elyt Lab Workshop, , February 17-20, 2013, Zao To-o-gatta, Japan

5. CHEVALIER J. Zirconia for dental implants applications: opportunities, challenges and risks. Italian-German Workshop on ‘Materials for biomedical applications’, 8-11 Avril 2013, Villa Vigoni, Loveno-Menaggio, Italy.

6. CHEVALIER J. Elaboration de matériaux inorganiques et composites pour la réalisation d'implants et de substituts osseux. Journée Sciences des Matériaux et Médecine, Phelma Minatec, 7 juin 2013, Grenoble, France.

7. CHEVALIER J. Development of Zirconia based nano-composites for orthopedic and dental applications. Materials in Medecine (MiMe), 1st edition, 8 -11 Octobre, 2013, Faenza, Italy.

8. GARNIER V., Processing effects on sintering of transparent Al2O3 and MgAl2O4 ceramics by FAST/SPS, (invited) – ICCPS-12 – Portland (USA) les 4-7 août 2013

9. GODIN N., E. MAILLET, P. REYNAUD, M. R’MILI, G. FANTOZZI, J. LAMON, Lifetime prediction with Acoustic Emission during static fatigue tests on Ceramic Matrix Composite at intermediate temperature under air, 8th International Conference on High Temperature Ceramic Matrix Composites, HTCMC 8 in Xi’an, September 23-26 2013

10. GODIN N., R’MILI M., REYNAUD P., FANTOZZI G., LAMON J., Identification of damage modes and lifetime prediction with acoustic emission monitoring on ceramic matrix composites during static fatigue tests at high temperature under air, Workshop « Integrated monitorintg of structures: damage assessment of composite materials by acoustic emission » organisé par le Labex Action (Smart systems integrated into physical structures, FEMPTO à Besançon, 19 décembre 2013

11. GODIN N., FANTOZZI G., R’MILI M., DESCHANEL S., COURBON J., Emission acoustique et transformation martensitique, CFCAM Discussion Meeting "Moving heterogeneities and

elastodynamic wave propagation: simulation and detection" le 28 mai 2013 à l'Institut Henri Poincaré à Paris

12. MEILLE S., Instrumented indentation of porous ceramics a case study on Calcium Phosphate cements, Thermec’ Conference (invited) , Las Vegas, December 2nd 2013

13. MEILLE S., Instrumented micro-indentation in the follow-up of the resorption of brushite cements, Worshop Biobone European project, Lyon, November 7-8th 2013

14. MEILLE S., Instrumented micro-indentation in the study of resorbable ceramics, Worshop Longlife – Restoration European projects, Madrid, September 12th 2013

15. REYNAUD P., FANTOZZI G., GODIN N., R’MILI M. Micromechanical analysis of the mechanical behavior of long life reinforced ceramic matrix composites. HTCMC-8, Xi’an, Shaanxi, China, 22-26/09/2013.

2012 : 1. CHEVALIER J. Zirconia as a ‘ceramic steel?’ Current status after 30 years of research, PMS

2012, XIII Congreso Nacional de Propriedades Mecanicas de Solidos, 26-28th September 2012, Alcoy, Spain.

2. CHEVALIER J. Zirconia and zirconia toughened composites for orthopedic and dental implants : past issues and current trends, Workshop “Glasses and ceramics for biomedical applications”, 24-25 October 2012, Turin, Italy.

3. COURTOIS N, CHEVALIER J., REVERON H. Processing and characterization of a tough, strong and stable Ce-TZP/MgAl 2O4 composite for biomedical applications, Thirteen European Inter-Regional Conference on Ceramics CIEC 13. Barcelona, 12-14th September 2012

4. FANTOZZI G., REYNAUD P. Comportement Mécanique des Composites à Matrice Céramique, Journées Techniques AET, Grenoble, 13-14 juin 2012.

5. MAGALLANES PERDOMO M, CHEVALIER J., GREMILLARD, et al. 'Organic-Inorganic Scaffolds for Bone Substitute Applications', Materials Science & Technology 2012, Pittsburg, USA, October 7-11, 2012.

2011

1. CHEVALIER J. Tough, Strong and Stable zirconia based ceramics for orthopedic and dental applications. Past issues, current state and future trends. 35th International Conference and Exposition on Advanced Ceramics and Composites, 23-28 january 2011, ICACC'11, Daytona, USA.

2. CHEVALIER J. Porous inorganic and composite scaffolds for Bone Substitute Applications : Current achievements and trends. International Workshop on Cellular Materials (I.Wo.C.Mat. '11), 16th December 2011, Turin, Italy.

3. FANTOZZI G. ‘Relaxations associated with phase transitions in ferroelectrics’ ICIFMS 16 Lausanne, July 3-8, 2011

4. ROUSSEL N., LALLEMANT L., GUILLEMET S., CHANE CHING J.Y., DURAND B., BONNEFONT G., GARNIER V., FANTOZZI G. - ECerS XII Stockholm, Sweden, June 19-23, 2011 ‘Influence of doping on dilatometric behaviour of nanometric alumina powders’

5. GARNIER V., AMAN Y., DJURADO E., ‘New insights on SPS sintering mechanisms Materials Science & Technology’ 16-20 Oct. 2011-Columbus, Ohio, Etats-Unis

6. GODIN N., ‘Du bruit à la science ……. des matériaux composites’, conf invitée au séminaire MECAMAT consacré au Matériaux composites, AUSSOIS Janvier 2011

7. GODIN N., ‘Emission acoustique et endommagement des matériaux composites’, séminaire invitée à l’Institut de Mécanique et Ingénierie de Bordeaux, Dépt. Durabilité Matériaux Assemblages et Structures, le 31 mars 2011

8. REVERON H., J. CHEVALIER, M. SCHWEIGER, F. ROTHBRUST, V.M. RHEINBERGER, W. HÖLAND. Zirconia for dental restoration: a review of current use and research. E. Apel, C. Ritzberger, N. Courtois, 12th Conference and Exhibition of the European Ceramic Society

ECerS, Juin 2011, Stockholm (Suède)

2010 1. CHEVALIER J. Organic-Inorganic Scaffolds for Bone Substitute Applications, Entretiens

Jacques Cartier, 22-23th November 2010, Villeurbanne, France 2. CHEVALIER J., L. GREMILLARD. Fiabilité des implants en zircone et alumine zircone: état des

connaissances actuelles et perspectives, Innover dans les implants orthopédiques, 17 Juin 2010, CETIM, Saint Etienne.

3. CHEVALIER J., Improving the Mechanical Properties of Calcium Phosphate and Bioactive Glasses Bone Substitutes by Polymer Infiltration, Twelfth European Inter-Regional Conference on Ceramics (CIEC 12), 7th-9th september 2010, Mons, Belgique, 2010.

4. FANTOZZI G., REYNAUD P., GODIN N., R'MILI M., ‘Mechanical behaviour at intermediate

temperatures of ceramic matrix composites’, HTCMC7, Bayreuth 20-22/09/2010. 5. GODIN N., REYNAUD P., R’MILI M., FANTOZZI G., ‘De l’émission acoustique aux mécanismes

d’endommagement des matériaux composites’, MATERIAUX 2011, 18-22/10 à Nantes 6. GODIN N., L’émission acoustique et la durée de vie d’une pièce, JEC Matériaux Composites :

Contrôle Non Destructif, ‘Du besoin industriel, à l’environnement R&D et à la normalisation’, 21/06/ 2010 Paris

7. PEROGLIO M, GREMILLARD L. , CHEVALIER J. et al. Improving the Mechanical Properties of Calcium Phosphate and Bioactive Glasses Bone Substitutes by Polymer Infiltration, Twelfth European Inter-Regional Conference on Ceramics (CIEC 12), 7rd - 9rd September 2010, Mons, Belgique.

8. REVERON H. ‘Síntesis y elaboración de nanocompuestos cerámicos (Synthèse et élaboration de nanocomposites céramiques)’. Facultad de Ingeniería mecánica y eléctrica- CIIDIT, Universidad Autónoma de Nuevo León, à distance, Janvier 2010, Nuevo León-Mexique.

9. REYNAUD P., R’MILI M., GODIN N., FANTOZZI G. Mechanical behaviour at high temperature of ceramic matrix composites and damage. CIMTEC, Montecatini, 6-11 juin 2010

2009

1. FANTOZZI G. Thermomechanical behaviour of alumina and alumina based micro/nanocomposites: effect of microstructure. VII conference INSTM Science et Technologie des Matériaux, Tirrenia, Italie, 9-12 Juin 2009.

2. FANTOZZI G. Processing and thermomechanical behaviour of alumina and alumina based nanocomposites. XI ECerS Conference (European Ceramic Society), Varsovie, Pologne, 22-26 juin 2009

3. GODIN N., Identification des mécanismes d’endommagement dans les composites, JEC Composite, Matériaux Composites : Contrôle Non Destructif. ‘Quoi de neuf dans les laboratoires de recherche ?’Paris 8/12/2009

4. L. GREMILLARD, J. CHEVALIER, Transformation de phase quadratique – monoclinique dans la zircone: caractéristiques et implications (conference invitée) Mécanique et mécanismes des changements de phases, colloque Mecamat 2009, Aussois (France), 26-30 janvier 2009.

5. GREMILLARD L., CHEVALIER J., ‘The tetragonal to monoclinic transformation in zirconia: lessons learned and future trends’, AK Biokeramics Meeting, Aachen (Allemagne), 20/11/2009

6. JOLY-POTTUZ L., ‘Trois techniques d’imagerie de microscopie électronique pour caractériser des objets nanométriques dans les cellules’, 3ème séminaire annuel du Cluster MACODEV 19-20/03/2009, Sévrier, France

LIVRES 2013 FANTOZZI G., NIEPCE J-C., BONNEFONT G. Co-éditeurs de l’ouvrage « Les Céramiques Industrielles, Propriétés, mise en forme et applications » édité par Dunod, 498 pages, 2013. Participation de J. Chevalier, G. Fantozzi et V. Garnier 2009 Gilbert FANTOZZI Co-éditeur de l’ouvrage « Science et Technologies Céramiques » édité par EDP Sciences, 834 pages, 2009. Chapitre I p1-50, 2009 et Chapitre VII p769-798, 2009. CHAPITRES D’OUVRAGES SCIENTIFIQUES 2014 L. JOLY-POTTUZ, E. CALVIE, J. RETHORE, S. MEILLE, C. ESNOUF, J. CHEVALIER, K. MASENELLI-VARLOT Mechanical properties of nanoparticles: characterization by in-situ nanoindentation inside a Transmission Electron Microscope, Handbook of Mechanical Nanostructuring", Wiley ed., 2014 G. N. MORSCHER, N. GODIN, “Use of Acoustic Emission for Ceramic Matrix Composites” chapter in “Ceramic Matrix Composites: Materials, Modeling and Technology” Edited by: Narottam P. Bansal and Jacques Lamon, to be published by Willey ed. 2014 FANTOZZI G., SAADAOUI M., Toughness, Fatigue and thermal shock of ceramics : microstructural effects, in Comprehensive Hard Materials VK Sarin (Ed in chief) L. Llanes, D. Mari (vol Editors), Chapitre 2.10 (pp. 299-319), 2014, Elsevier. FANTOZZI G., REYNAUD P., Mechanical behavior of SiC fiber-reinforced Ceramic Matrix Composites, in Comprehensive Hard Materials VK Sarin (Ed in chief) L. Llanes, D. Mari (vol Editors), Chapitre 2.7 (pp. 345-366), 2014, Elsevier. 2013 JOLY-POTTUZ L., ‘Nanolubricants’, Encyclopedia of Tribology, Q. Jane Wang and Yip Wah Chung eds, Springer 2013 GREMILLARD L., M. MAGALLANES-PERDOMO, S. MEILLE, J. CHEVALIER, L. LEFEBVRE, Biomatériaux en verres et vitrocéramiques, Du Verre au Cristal : Nucléation et cristallisation des matériaux vitreux, D. Neuville, L. Cormier, D. Caurant, L. Montagne, EDP Sciences, 2013 2012 GREMILLARD L., MEILLE S., CHEVALIER J., ZHAO J., FRIDRICI V., KAPSA PH., GERINGER J., URIBE J., « Degradation of bioceramics », 54 p., Degradation of implants materials, Noam Eliaz, Springer 2012, DOI 10.1007/978-1-4614-3942-4_9. 2011 CHEVALIER J. AND GREMILLARD L., (2011). ‘Zirconia as a Biomaterial’. In: P. Ducheyne, K.E. Healy, D.W. Hutmacher, D.W. Grainger, C.J. Kirkpatrick (eds.) Comprehensive Biomaterials, Elsevier, vol. 1, pp. 95-108

FANTOZZI G., REYNAUD P., (2011). "Mechanical behaviour of SiC fiber reinforced ceramic matrix composites", In: V. SARIN, Comprehensive Hard Materials, Volume 2: Ceramics (éd. L. LLANES), Elsevier, à paraître. FANTOZZI G., LE GALLET S., NIEPCE J. C. Co-éditeur de l’ouvrage « Science et Technologies Céramiques » édité par EDP Sciences, 834 pages, 2011 (seconde édition). 2010 JOLY-POTTUZ L., Tribology of Nanoparticles. Chapitre 26 dans « Handbook of Nanophysics: Nanoparticles and Quantum Dots », livre édité par K.D. Sattler, CRC Press 2010. 2009 GARNIER V., Chapitre : “Frittage sous contraintes mécaniques” p.220-243 dans « Science et Technologies Céramiques » Edité par le GFC (2009) EDP Sciences. ISBN 978-2-7598-0428-3

COMMUNICATIONS AVEC ACTES DANS UN CONGRES INTERNATIONAL 2014

1. HADJAB I., CROZIER P., DOUILLARD T., MEILLE S., BOIVIN G., CHEVALIER J., H. FOLLET Evaluation of Intrinsic Properties for Bone attained by Osteomalacia using Nanoindentation & FTIRM Analysis, 9th International Conference on the Mechanics of Time Dependent Materials, Montreal, May 29th 2014

2. GERARD J.F., LUTZ V., GODIN N., LORTIE F., DUCHET-RUMEAU J., Carbon nanotubes as nanofillers and yarn-like fibers in epoxy matrices for designing advanced composites, Compo2014, Nanocomposites and Biocompsoites, 28 avril-01 may 2014, Rehovot, Israel.

3. GODIN N., MAILLET E., R'MILI M., REYNAUD P., FANTOZZI G., LAMON J., Lifetime prediction during static fatigue tests on ceramic matrix composite at intermediate temperature under air, 16th European Conference on Composite Materials ECCM16, Séville, Espagne (2014)

4. LUTZ V., LORTIE F., DUPUY J., DUCHET-RUMEAU J., GODIN N., GERARD J. F., Interfaces between Yarn-Like Carbon Nanotubes Fibers and Epoxy Matrix - Comparison with Carbon Fibers, 4th International Carbon Composites Conference "IC3, Arcachon (France), May 12-14 (2014)

5. MAILLET E., GODIN N., R’MILI M., REYNAUD P., FANTOZZI G., LAMON J., Lifetime Prediction with Acoustic Emission, CIMTEC, 13th International ceramics congress, Montecatini Terme Italy, Juin 2014

6. REYNAUD P., GODIN N., R’MILI M., FANTOZZI, Mechanical Behaviour under Fatigue at High Temperature of Ceramic-matrix G. Composites, CIMTEC, 13th International ceramics congress, Montecatini Terme Italy, Juin 2014

2013 1. BOUTERF A., ROUX S., HILD F., MAIRE E., MEILLE S., BRAJE, X., VIVIER G.

‘Identification d'une loi d'endommagement de plâtre à partir de mesures de champs de deplacements’. Congrès Français de Mécanique . 2013.

2. BOUTERF A., ROUX S., HILD F., E. MAIRE, J. ADRIEN, MEILLE S., VIVIER G., X. BRAJER, A novel digital volume correlation strategy applied to lightweight gypsum indentation tests, Photomechanics, Montpelier 27-29th May, 2013

3. CALVIÉ E., JOLY-POTTUZ L., GARNIER V., JORAND Y., MALCHERE A., ESNOUF C., RÉTHORÉ J., CHEVALIER J., MASENELLI-VARLOT K., “TEM in-situ nanocompression experiments on nano-structured ceramics”, ECERS, Limoges, 06/2013

4. CALVIÉ E., JOLY-POTTUZ L., J. RÉTHORÉ, GARNIER V., JORAND Y., ISSA I., MALCHERE A, CHEVALIER J., MASENELLI-VARLOT K., development of tem in situ nanoindentation to characterize the mechanical behavior of ceramic nanoparticles, mc2013, regensburg, 08/2013

5. CALVIÉ E., JOLY-POTTUZ L., RÉTHORÉ J., GARNIER V., JORAND Y., ISSA I., MALCHERE A, CHEVALIER J., MASENELLI-VARLOT K, “tem in situ nanoindentation and mechanical analysis of ceramic nanoparticles”, euromat 2013, séville, 09/2013

6. CLÉMENT P., MEILLE S., CHEVALIER J., OLAGNON C., Instrumented indentation technique for the mechanical characterization of porous ceramics for bone substitution: a methodology, 13th ECERS conference, Limoges, 23-27th June 2013,

7. CLÉMENT P., TADIER S., MEILLE S., CHEVALIER J., Application of a micro-indentation technique to investigate the mechanisms of calcium phosphate degradation, 13th ECERS conference, Limoges, 23-27th June 2013,

8. CLÉMENT P., TADIER S., MEILLE S., CHEVALIER J., Follow-up of bioceramics bio-degradation by instrumented indentation, EUROMAT conference, Sevilla, 8-13th September 2013

9. GODIN N., MAILLET E., REYNAUD P., R’MILI M., FANTOZZI G., LAMON J., ‘Lifetime prediction during static fatigue tests on ceramic matrix composite at intermediate temperature

under air’, 8th international conference on high temperature ceramic matrix composites, htcmc 8 in xi’an, september 23-26 2013

10. GREMILLARD L., BIOTTEAU-DEHEUVELS K., CHEVALIER J., doping as a way to control microstructure and mechanical properties of al2o3-zro2 composites, 37th international conference & exposition on advanced ceramics and composites, daytona beach, fl., usa, 27/01-01/02/2013

11. GREMILLARD L., MARTIN L., CHEVALIER J., AURELLE J.L., ESPINOUSE J., ‘Multi-physic degradation mechanisms of zirconia and alumina-zirconia composites for total hip arthroplasty: interactions between wear and hydrothermal ageing’, materials in medicine international conference (mime), faenza (italie), 8-11 octobre 2013

12. GUO S., ESTEVEZ R., WEYGAND S., OLAGNON C. ‘3D analysis of amorphous polymers deformation under mode I’13th International Conference on Fracture 2013, ICF 2013; Beijing; China; 16 / 21 June 2013

13. LOMBARDI M., GREMILLARD L., CHEVALIER J., LEFEBVRE L., CACCIOTTI I., BIANCO A., MONTANARO L., ‘A comparative study between melt-derived and sol-gel synthesized 45s5 bioactive glasses’, key engineering materials, vol. 541 (2013) pp 15-30

14. LUTZ V., GODIN N., LORTIE F., DUCHET-RUMEAU J., GERARD J.F., ‘Interfacial aspects of carbon multi-nanotubes fiber-reinforced epoxy composites’, euromat 2013, 8-13 septembre 2013, séville

15. MAILLET E., GODIN N., R'MILI M., REYNAUD P., LAMON J., FANTOZZI G.; Determination of acoustic emission sources energy and application towards lifetime prediction of ceramic matrix composites (2013) Ceramic Engineering and Science Proceedings, 33 (2), pp. 15-25 (Daytona Beach, FL; USA; 22 /27 January 2012)

16. MAINJOT A.K., DOUILLARD T., GREMILLARD L., SADOUN M.J., CHEVALIER J., 3D-Characterization of the veneer-zirconia interface using FIB nano-tomography (2013) Dental Materials, 29 (2), pp. 157-165.

17. MANÉ Z., REYNAUD P., GODIN N., R'MILI M., FANTOZZI G., ‘Fatigue behaviour and damage of c/c composites, 8th international conference on high temperature ceramic matrix composites’, htcmc 8 in xi’an, september 23-26 2013

18. MARCHAT D., BOUËT G., LUECKGEN A., ZYMELKA M., MALAVAL L., SZENKNECT S., DACHEUX N., BERNACHE ASSOLLANT D., CHEVALIER J. ‘Physico-chemical characterization and in vitro biological evaluation of pure SiHA for bone tissue engineering application’ Key Engineering Materials 2013, Volume 529-530 (1), pp. 351-356 (Conference Paper 24th Symposium and Annual Meeting of International Society for Ceramics in Medicine, ISCM 2012; Fukuoka;21-24/10/2012)

19. MIRET C., MALCHERE A., DOUILLARD T., FORAY G., JOLY-POTTUZ L., characterization of inorganic-organic cement materials, mc2013, regensburg, 08/2013

20. MONTANARO L., PALMERO P. LOMBARDI M., ESNOUF C., CHEVALIER J., CARDINAL S., Thermal analyses applied to ceramic nanopowders: From synthesis to sintering: A review on transition alumina powder-based materials (2013) Journal of Thermal Analysis and Calorimetry, 112 (1), pp. 437-445.

21. PETIT C., MAIRE E., MEILLE S., Multiscale analysis of metallic foams by X-ray tomography and finite element modeling, Metfoam 2013, Raleigh, 23-26th June 2013.

22. PICARD M., MAILLET E., REYNAUD P., GODIN N., R'MILI M., FANTOZZI G., LAMON J. ‘Damage sensitivity and acoustic emission of SiC/SiC composite during tensile test and static fatigue at intermediate temperature after impact damage’ 36th International Conference on Advanced Ceramics and Composites, ICACC 2012; Daytona Beach, FL; USA; 22/27-01-2012

23. RACLE E., GODIN N., REYNAUD P., R'MILI M., FANTOZZI G., indicators for the damage evolution at high temperature under air of a sic/[si-b-c] composite subjected to cyclic and static loading, 8th international conference on high temperature ceramic matrix composites,

htcmc 8 in xi’an, september 23-26 2013 24. REVERON H, JAAFAR M, ESNOUF C, FANTOZZI G. processing, microstructure and creep

behaviour of alumina-sic micro-nanocomposites. 37th international conference & exposition on advanced ceramics & composites, janvier 2013, daytona-beach

25. REYNAUD P., GODIN N., R'MILI M., FANTOZZI G., ‘Micromechanical analysis of the mechanical behaviour of long-fibre-reinforced ceramic-matrix composites, 8th international conference on high temperature ceramic matrix composites’, htcmc 8 in xi’an, september 23-26 2013

26. ROUCHIER S., MONIKAWOLOSZYN M., FORAY G., ROUX J.-J., ‘Moisture infiltration in fractures and consequences on the hygrothermal performance of building facades (Conference Paper)’ Proceedings of BS 2013:, Pages 3562-3569 (13th Conference of the International Building Performance Simulation Association, BS 2013; Chambery; France; 26 August 2013 through 28 August 2013; Code 100481)

27. SANON C., CHEVALIER J., GREMILLARD L., T. DOUILLARD S. SCHERRER, the long-term performances of zirconia implants, materials in medicine international conference (mime), faenza (italie), 8-11 octobre 2013

28. STAUB D., MEILLE S., LE-CORRE V., ROULEAU L., CHEVALIER J., Mechanical characterization of highly porous ceramics for catalyst supports, EUROMAT conference, Sevilla, 8-13th September 2013

2012 1. CALVIE E, JOLY-POTTUZ L, GARNIER V., GREMILLARD L., JORAND Y., CHEVALIER J.,

MALCHERE A, MASENELLI-VARLOT K., ‘TEM in-situ nanocompression experiments on nano-structured ceramics’, EMC 2012, Manchester, 09/2012

2. CLÉMENT P., MEILLE S., CHEVALIER J., OLAGNON C., Mechanical characterization by inverse analysis of instrumented indentation test Euromech Saint Etienne, May 2012

3. CLÉMENT P., S. MEILLE, J. CHEVALIER, C. OLAGNON, ‘Mechanical characterization by instrumented indentation test: a methodolgy for highly porous ceramics’, CIEC 13 Barcelona September 2012.

4. ETIEMBLE A., IDRISSI H., MEILLE S., ROUÉ L., In Situ Damage Monitoring of Metal Hydrides for Ni-MH Batteries by Concomitant Generated Force and Acoustic Emission Measurements, 221st ECS Meeting, Seattle, May 6 -10, 2012

5. FERNANDEZ L., CLÉMENT P., TADIER S., MEILLE S., CHEVALIER J., Follow-up of the in-vitro degradation of calcium phosphate cements by a micro-indentation technique, CIEC 13 Barcelona September 2012

6. FORAY G. , CARDINAL S., MALCHERE A., PELLETIER J.M. Mechanical spectroscopy, a tool to characterize cement latex composites Diffusion and Defect Data Pt.B: Solid State Phenomena 2012, Volume 184, pp. 399-4041 16th International Conference on Internal Friction and Mechanical Spectroscopy, ICIFMS-16 ; Lausanne ; 3-8/07/2011

7. ISSELE H., MERCIER D., VIGNOUD L., OLAGNON C. ‘Determination of the young's modulus of a TiN thin Film by Nanoindentation : Analytical models and FEM simulation’, e-Journal of Surface Science and Nanotechnology Volume 10, 2012, pp 624-629

8. LEPLAY P., RÉTHORÉ J., MEILLE S., BAIETTO M.C., innovative characterization of the fracture behaviour of ceramics using advanced 2d and 3d digital image correlation, euromat 12-15 septembre 2011, Montpellier

9. LUTZ V., GODIN N., LORTIE F., DUCHET-RUMEAU J., J. F. GERARD, Carbon multi-nanotubes fibers for RTM processed composites, 15th European Conference on Composite Materials, Venise, Italie (2012)

10. MAGALLANES-PERDOMO M.,MEILLE S., CHENAL J.-M., PACARD E., CHEVALIER J., ‘Bioactivity modulation of bioglass® powder by thermal treatment’, 11th ecers congres, stockholm, june 2011

11. MALCHERE A., FORAY G., JOLY-POTTUZ L., ‘Latex-cement composite, combined ESEM

and MET construction material nanostructure characterisation’, CIEC13, 09/2012 12. MAZAHERI M., MARI D., SCHALLER R., FANTOZZI G. ‘High temperature mechanical

spectroscopy study of 3 mol% yttria stabilized tetragonal zirconia reinforced with carbon nanotubes’ Diffusion and Defect Data Pt.B: Solid State Phenomena Volume 184, 2012, pp 265-270 ICIFMS-16; Lausanne; Switzerland; 3/8 July 2011

13. MEILLE S., LOMBARDI M., CHEVALIER J., MONTANARO L., mechanical properties of porous ceramics in compression: on the transition between elastic brittle and cellular behaviour, euromat 12-15 september 2011, montpellier

14. MOREL B., FORAY G., BOGNER A., ADRIEN., J., MAIRE E., B. YRIEIX, Granular silica aerogel, comparative study of X-ray tomography and traditional caracterization methods, CIEC 13,Barcelone, 09/2012

15. PELLETANT A, REVERON H, CHEVALIERJ, FANTOZZI G, BLANCHARD F, GUINOT F, FALZON F., ‘Designing near-zero thermal expansion ceramic composites by using beta-eucryptite’. ciec 13, septembre 2012, barcelone (espagne).

16. ROUCHIER S., JANSSEN H., RODE C., WOLOSZYN M., FORAY G., J-J. ROUX, ‘Non destructive observation of damage in mortar and dondrete during mechanical loading ofr the evaluation of moisture transfer properties’, 16th International Building Physics Conférence, Kyoto, May 2012

17. STAUB D., MEILLE S., LE CORRE V., CHEVALIER J., Mechanical properties of highly porous alumina for catalyst supports, CIEC 13 Barcelona September 2012

2011

1. BALA Y., DEPALLE B., DOUILLARD T., MEILLE S., FOLLET H., CHEVALIER, J., BOIVIN G., Micromechanical behavior of human cortical bone: elasticity is related to mineral while plasticity is related to organic matrix, IOF ECCEO, 23-26 mars 2011, Valencia, Spain

2. CALVIÉ E., JOLY-POTTUZ L., ESNOUF C., CLÉMENT P., GARNIER V., CHEVALIER J., JORAND Y., MALCHÈRE A., EPICIER T., MASENELLI-VARLOT K., ‘Compression behaviour of ceramic nanoparticles as studied by in situ nanoindentation in the TEM’, EUROMAT 2011, Montpellier, 09/2011

3. CLEMENT P., MEILLE S., CHEVALIER J., OLAGNON C., ‘Instrumented spherical micro-indentation on porous ceramics’, Euromat 12-15 septembre 2011, Montpellier

4. LOMELLO F, BONNEFONT G, LECONTE Y, FANTOZZI G, GARNIER V, JORAND Y, PINAULT M., MAYNE-L'HERMITE M., LE GALLET S., BERNARD F., HERLIN-BOIME N. ‘Consolidation and mechanical properties of nano-SiC/carbon nanotubes composite ceramics sintered by SPS’, EUROMAT 2011 Monpellier

5. CALVIE E., JOLY-POTTUZ L., ESNOUF C., GARNIER V., CHEVALIER J., MALCHERE A., MASENELLI-VARLOT K., ‘Effet de taille sur les propriétés en compression in situ en MET de nanoparticules d'alumine’, colloque de la Société Française des Microscopies, Strasbourg, 07/2011

6. GINSAC N., MAGALLANES-PERDOMO M., CHENAL J.M., MEILLE S., PACARD E., ZENATI R., HARTMANN D., CHEVALIER J. ‘Effect of Bioglass® content on the PDLLA/Bioglass® bioactivity’, 11th ECERS congres, Stockholm, June 2011

7. GODIN N., R'MILI M., REYNAUD P., FANTOZZI G., LAMON J. ‘Identification of damage modes in ceramic matrix composites by acoustic emission signal pattern recognition’ Ceramic Engineering and Science Proceedings(2011), 32 (2), pp. 123-133

8. LAMON J., GODIN N., R'MILI M., REYNAUD P., FANTOZZI G. ‘Identification of damage modes in ceramic matrix composites by acoustic emission signal pattern recognition’. Proceedings of the 35th International Conference on Advanced Ceramics & Composites. Daytona Beach, Florida, January 23-28, 2011

9. LAMON J., GODIN N., R'MILI M., REYNAUD P., FANTOZZI G. ‘Identification of damage modes in ceramic matrix composites using acoustic emission signal pattern recognition’. Proc. Materials Science & Technology 11 (MS&T'11), Ceramic Matrix Composites Symposium, Columbus, Ohio, October 16-20, 2011.

10. LEPLAY P., RÉTHORÉ J., MEILLE S., BAIETTO M.C., ‘Innovative characterization of the

fracture behaviour of ceramics using advanced 2D and 3D Digital Image Correlation’, Euromat 12-15 septembre 2011, Montpellier

11. MAGALLANES-PERDOMO M., MEILLE S., CHENAL J.-M., PACARD E., CHEVALIER J., ‘Bioactivity modulation of Bioglass® powder by thermal treatment’, 11th ECERS congress, Stockholm, June 2011

12. MASSON A., BUTTAY C., MOREL H., RAYNAUD C., HASCOET S., GREMILLARD L. ‘High-temperature die-attaches for SiC power devices’ Proceedings of the 2011 14th European Conference on Power Electronics and Applications, EPE 2011, art. no. 6020161

13. MEILLE S., LOMBARDI M., CHEVALIER J., MONTANARO L., ‘Mechanical properties of porous ceramics in compression: On the transition between elastic brittle and cellular behaviour’, Euromat 12-15 September 2011, Montpellier

14. ROUCHIER S., WOLOSZYN M., FORAY G., ROUX J-J., “Characterization of damage-induced evolution of building materials hygric properties”, Nordic Symposium on building Physics, Tampere – Finland, May 30st-June 2nd, 2011

15. ROUCHIER S., WOLOSZYN M., FORAY G., ROUX J-J., “Full-range modelling of heat and moisture transfer coefficients in damaged building materials”, International Conference on Durability of Building Materials and Components, Porto – Portugal, April , 2011

2010 1. BIGNON A., BOUVILLE F., MEILLE S., MARTIN A., CHEVALIER J., ‘An injectable bone

substitute, hardening, bioactive and resorbable, made of a calcium sulphate / calcium phosphate composite’. GRIBOI Meeting, Torino, 25-27 March 2010.

2. CALVIÉ E., JOLY-POTTUZ L., MALCHÈRE A., MASENELLI-VARLOT K., “TEM in situ nanoindentation: influence of the sample geometry”, 17th International Microscopy Congress IMC’17, Rio, Brésil, 09/2010

3. FORAY G., DESCAMPS-MANDINE A., R’MILI M., ‘Glass fiber statistical strength distribution : correlation between mechanical parameters and microstructural observations’. HTMC 7, octobre 2010, p41-46

4. GODIN N., CHEVALIER J., CHENAL J.-M, MEILLE S., HARTMANN D., ZENATI R. ‘Evaluation of a PDLLA/45S5 bioglass composite: Mechanical and biological’ Ceramic Engineering and Science Proceedings Volume 30( 6), 2010, pp 95-103 Advances in Bioceramics and Porous Ceramics II - 33rd International Conference on Advanced Ceramics and Composites; Daytona Beach, FL;18-23 January 2009

5. GINSAC N., CHEVALIER J., CHENAL J.M., MEILLE S, HARTMANN D., ZENATI R. ‘Evaluation of a PDLLA/45S5 bioglass composite: Mechanical and biological properties’ ‘(2010) Ceramic Engineering and Science Proceedings, 30 (6), pp. 95-103

6. JOLY-POTTUZ L., THOLLET G., MALCHERE A. AND BOGNER A. “Improvement of imaging conditions for sintering of ceramics in ESEM”, 17th International Microscopy Congress IMC’17, Rio, Brésil, 09/2010

7. LEPLAY P., BAIETTO M.-C., RETHORÉ J., MEILLE S., Damage law identification of a quasi brittle material using digital image correlation, 14th ICEM (International Conference on Experimental Mechanics), Poitiers, 4-9 July 2010

8. LEPLAY P., RETHORÉ J., MEILLE S., BAIETTO M.-C., ‘Damage law identification from a bending test of a quasi-brittle material using digital image correlation’, 14th ECCM (European Conference on Computational Mechanics), Paris, 16-21 May 2010

9. LOMBARDI M., MEILLE S., CHEVALIER J., MONTANARO L., ‘Improving the porosity features control of ceramic cellular components through a modified gelcasting process’, 12th CIMTEC Meeting, 6-18 June 2010, Toscano, Italy

10. LOMBARDI M., MEILLE S., CHEVALIER J., MONTANARO L., ‘Relations between mechanical properties and porosity features in a gelcast alumina ceramic’, 34rd ICACC Florida, January 2010.

11. MAILLET E., GODIN N., R’MILI M., REYNAUD P., FANTOZZI G., FAYOLLE G. ‘Lifetime prediction with acoustic emission during fatigue tests on ceramic matrix composites at high temperature under air’. Bayreuth, Allemagne (2010)

12. MAURIN R., REYNAUD P., R’MILI M., FANTOZZI G., GODIN N., FAYOLLE G. ‘Mechanical and fatigue evolution of CMC under air at intermediate temperatures’. Proceedings of HT-CMC 7, Eds. W. Krenkel and J. Lamon, p 320-325, 2010

13. PHILIP F, GODIN N, DESCHANEL S, ESTEVEZ R, COURBON J. LEROY J-M., F. GROSJEAN, CANGEMI L.., ‘Identification of damage sources in thermoplastic composites, Through acoustic emission analyses based on pattern recognition technique’, ECCM14, Budapest Hongrie du 07 au 10 juin 2010

14. PICARD M., REYNAUD P., R’MILI M., GODIN N., FANTOZZI G., DISS P. ‘Notch sensitivity of CMC during creep and tensile tests at intermediate temperature’. Proceedings of HT-CMC 7, Eds. W. Krenkel and J. Lamon, p 346-351, 2010

2009 1. BENALI N., ESTEVEZ R., TANGUY D., DELAFOSSE D, ‘Cohesive zone model for

hydrogen embrittlement in intergranular fracture and slow crack growth in Al 5xxx/7xxx alloys ‘12th International Conference on Fracture 2009, ICF-12 Volume 4, 2009, pp. 2981-2987 ICF-12;Ottawa, ON;12 - July 2009

2. CHALENCON F., ORGEAS L., DUMONT P., FORAY G., CAVAILLE JY., ‘Rheology of fibre-reinforced cement pastes during lubricated compression tests’. Congres AERC Cardiff, 2009

3. COTTRINO S., ADRIEN J., JORAND Y. ‘Preparation of highly concentrated nanosized alumina suspensions for spray-drying’ (2010) Ceramic Engineering and Science Proceedings, 30 (8), pp. 221-231. Conference name: Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials III - 33rd International Conference on Advanced Ceramics and Composites 18/23-01-2009, Daytona Beach, FL

4. EL-HOUDAIGUI F., BENALI N., ESTEVEZ R., TANGUY D. ‘Cohesive zone model for hydrogen embrittlement of grain boundaries in al 5xxx alloys (2009)’ Proceedings of the 2008 International Hydrogen Conference - Effects of Hydrogen on Materials, pp. 604-612

5. ESTEVEZ R., SAAD-GOUIDER N., OLAGNON C., SAUTEREAU H. Numerical and experimental analysis of glassy polymer fracture at high rates, 1 to 5 m/s 12th International Conference on Fracture 2009, ICF-12, volume 4, 2009, pp. 3227-3233 -12;Ottawa, ON;12-17 July 2009

6. GINSAC N., CHEVALIER J., MEILLE S., CHENAL J.-M., HARTMANN D., ZENATI R., Evaluation of a PDLLA/45S5 bioglass composite: mechanical and biological properties, 33rd ICACC Florida, January 2009

7. JAAFAR M., REVERÓN H., BONNEFONT G., FANTOZZI G., Alumina-SiC Micro-nanocomposites Sintered by SPS for Thermo-mechanical Applications.. ECERS - 11th International Conference and Exhibition of the European Ceramic Society, Juin 2009, Cracow-Pologne

8. MONTANARO L.; CHEVALIER J; NAGLIERI V; JOLY-POTTUZ L, ‘Design of alumina-zirconia nanocomposite powders for implants development’, 11th European Ceramic Society (ECerS) Conference, Krakow, Poland, 21-25 June 2009. pp. 400-406

9. PALMERO P., MONTANARO L., ESNOUF C., FANTOZZI G. ‘Elaboration of alumina-yag nanocomposites from pressureless sintered Y-doped alumina powders’ (2009) Ceramic Engineering and Science Proceedings, 29 (8), pp. 147-157.

10. ROMERO DE LA OSA M., ESTEVEZ R., OLAGNON C., CHEVALIER J., TALLARON C. Cohesive zone model for intergranular environmental and stress assisted failure and analysis of slow crack growth in ceramic polycrystals, 12th International Conference on Fracture 2009, ICF-12 volume 7, 2009, pp. 5329-5336, ICF-12;Ottawa, ON;12 -17 July 2009

Communications sans actes Congrès nationaux:

2014 1. DESCHANEL S., GODIN N., ‘Étude de l’endommagement de matériaux par Emission

Acoustique’, Revisiter vos essais mécaniques des matériaux « de la structure à la nano structure » Journées SF2M Sud-Est 19 et 20 Juin 2014 - INSA Lyon

2. GODIN N., MORIZET N., TANG J., FREGONESE M. AND NORMAND B., ‘Classification de signaux d’émission acoustique en utilisant la transformée en ondelettes et l’algorithme Random Forests : Application à la détection de la corrosion localisée’, Congrès Français d’Acoustique (CFA) 22-25 avril 2014 Poitiers.

3. GODIN N., R’MILI M., REYNAUD P., FANTOZZI G., Emission acoustique et durée de vie des composites à matrice céramique, Congrès Français d’Acoustique (CFA) 22-25 avril 2014 Poitiers

4. RACLE E., GODIN N. - REYNAUD P. - R’MILI M. - FANTOZZI G., ‘Indicateurs d’endommagement pour des matériaux composites à matrice céramique sollicités en fatigue cyclique et statique’, Congrès Français d’Acoustique (CFA) 22-25 avril 2014 Poitiers

5. LE GALL T., GODIN N., MONNIER T., ‘Modélisation des sources acoustiques’, Congrès Français d’Acoustique (CFA) 22-25 avril 2014 Poitiers.

2013 1. FORAY G., MEILLE S., REYNAUD P., CARDINAL S., MALCHERE A. ‘Caractérisation

mécanique des plâtres et mortiers fibrés, originalité des approches céramistes’, AUGC 31, Paris 05/2013

2. MAILLET E., GODIN N., R’MILI M., REYNAUD P., FANTOZZI G., FAYOLLE G., ‘Suivi par émission acoustique de la fissuration multiple de la matrice et de l’ouverture des fissures matricielles dans les composites à matrice céramique lors d’une sollicitation mécanique’. 18èmes journées Nationales sur les Composites, 12 au 14 juin 2013, Nantes

3. RACLE E., GODIN N., REYNAUD P., R’MILI M., FANTOZZI G., MARCIN L., HERB V., KAMINSKI M., Mécanismes de ruine et évolution de l'endommagement d'un composite à matrice céramique soumis à un chargement cyclique et statique à chaud sous air, 18èmes journées Nationales sur les Composites, 12 au 14 juin 2013, Nantes

4. GODIN N., R’MILI M., REYNAUD P., FANTOZZI G., FAYOLLE G., ‘Apport de l’émission acoustique pour la modélisation de l’endommagement mécanique des composites à matrice céramique’, Congrès Français de Mécanique CFM 2013, 26 au 30 Août 2013, Bordeaux

5. BERNARD J., HANESSE F. X., GODIN N., REYNAUD P., R’MILI M., TOM L. G., RAVAILLER F., ‘Suivi par émission acoustique de structure sandwich composite/nid d’abeille lors de sollicitation en flexion 3 points : Analyse de la dynamique des précurseurs de la rupture’, Journée Scientifique et Technique : Assemblages des structures composites: technologies, comportement et tenue en service. Le 08 Novembre 2013, Bordeaux

6 GREMILLARD L., MARTIN L., CHEVALIER J., AURELLE J.L., ESPINOUSE J., ‘Multi-physics degradation mechanisms of orthoaedic zirconia: coupling hydrothermal ageing and wear on a hip simulator’, Journées Annuelles de la SF2M, 29-31 octobre 2013, Lille

7. CHEVALIER J., PEROGLIO M., GINSAC N., GREMILLARD L., MEILLE S., CHAZEAU L., GAUTHIER C., CHENAL J.M., ‘Organic-inorganic composites for bone substitute and bone repair applications: concepts, first results and potentialities’, Journées Annuelles de la SF2M, 29-31 octobre 2013, Lille

2011 1. RIMA W, LECLERC L, JOLY-POTTUZ L, POURCHEZ J, ALOY MT, ARMANDY E,

PERRIAT P,: ‘Développement de techniques d’imagerie de microscopie électronique pour étudier l’interaction nanoparticules /cellules biologiques’, Conférence au 5ème séminaire annuel du Cluster MACODEV 4-5/04/2011, Sévrier, France

2. GODIN N., DESCHANEL S., R'MILI M., REYNAUD P., LAMON J., FANTOZZI G ‘Emission acoustique et endommagement des matériaux composites, Journées Scientifiques et

Techniques « essais non destructifs et durée de vie des composites’ INSA Lyon, 27/28-10- 2011 3. MAILLET E., GODIN N., R'MILI M., REYNAUD P., FANTOZZI G., LAMON J., FAYOLLE

G, Détermination de la durée de vie lors d'essais de fatigue statique en température sur CMC à l'aide de l'émission acoustique, 17e Journées Nationales des Composites, Poitiers (2011)

4. PHILIP F., GODIN N., DESCHANEL S., LEROY J. M., GROSJEAN F., COURBON J., Caractérisation des endommagements d'un composite Carbone/PA12 par émission acoustique, 17e Journées Nationales des Composites, Poitiers (2011)

5. R’MILI M., GODIN N., LAMON J., Etude de la propagation sous critique dans les fibres de verre par relaxation de la charge, 17e Journées Nationales des Composites, Poitiers (2011)

2010 1. EL ZOGBHI B., REVERON H., CHEVALIER J. ‘Nouvelles céramiques à base de zircone

pour applications biomédicales.’ MATERIAUX 2010, Octobre 2010, Nantes-France 2. GINSAC N., CHEVALIER J., HARTMANN D., MEILLE S., CHENAL J.M., ZENATI R.,

‘Caractérisation de la bioactivité de matériaux composites polyacide lactique/bioverre’, Matériaux 2010, Nantes, 18-22 octobre 2010

3. DEPALLE B., BALA Y., DOUILLARD T., MEILLE S., FOLLET H., CHEVALIER J., BOIVIN G., ‘Contributions des caractéristiques microstructurales osseuses aux propriétés mécaniques à l’échelle de l’ostéon’, 12èmes Journées française de biologie des tissus minéralisés, Saint-Etienne, 9-11 juin 2010.

4. LEPLAY P., RETHORE J., MEILLE S., BAIETTO M.-C., ‘Mesures et simulations de fissures thermomécaniques - Applications à un filtre à particules Diesel’, 5th Gay Lussac Day Saint-Gobain, Paris, 6 juin 2010

6. PELLETANT A., BLANCHARD L., CHEVALIER J., FANTOZZI G., REVERON H. ‘Influence de la porosité sur le coefficient de dilatation thermique des matériaux à dilatation thermique négative (NTE) fortement anisotrope’. MATERIAUX 2010, Octobre 2010, Nantes

7. SIBIL A., GODIN N., R'MILI M., FANTOZZI G., ‘Application d’un algorithme génétique pour le traitement des données d’émission acoustique’, 10ème Congrès Français d'Acoustique, Lyon, 12-16 Avril 2010

2009

1. MOMON S., MOEVUS M., GODIN N., R’MILI M., REYNAUD P., FANTOZZI G., FAYOLLE G. ‘Détermination de la durée de vie lors d’essai de fatigue statique en température sur CMC à l’aide de l’émission acoustique : Application de la loi de Benioff’, 16e Journées Nationales des Composites, Toulouse (2009)

2. JAAFAR M., REVERON H., FANTOZZI G. ‘Frittage des micro-nanocomposites Alumine-SiC par SPS. Colloque Sciences et technologie des poudres et matériaux frittés’, Mai 2009, Montpellier-France

3. REVERON H. ‘Frittage SPS de l’alumine : matériaux transparents et nanocomposites pour des applications optiques et thermomécaniques.’ Journée thématique Nanomatériaux/Multimatériaux et Applications GDR (n° 3165)-SPS, Juin 2009, Paris-France

4. REVERON H. ‘Tube céramique nanostructurée pour structure treillis’. Journée des Rencontres de Technologies Spatiales CNES, Avril 2009, Toulouse-France