1
CHAPS SPECIFIC USE - HANDLING RAZOR WIRE / BARBED WIRE - VETERINARY CLAW AND BITE PROTECTION - GLASS AND STEEL INDUSTRIES - HEAVY DUTY OUTDOOR WORK : THORN PROTECTION , UTILITIES. ARBORICULTURE - RECYCLING, DEMOLITION , FENCING - SHARP OBJECT HANDLING - EXTREMELY HIGH CUT AND PERFORATION / PUNCTURE RESISTANCE SUPER TOUGH OIL+WATER RESISTANT LEATHER AND COMPOSITE LINER COMPLETE HAND AND LOWER ARM PROTECTION PERFORMANCE PROTECTION LEVELS This product accessory is designed meet the same European Standards as achieved with Gauntlet RIPDEX-G under Certification delivered by the notified Organization CENTEXBEL N°033/2015/0168, the EN388 levels opposite are for information only and reflect the results of testing of the RIPDEX-G (Razorpro) Gauntlets EN 420 1994 General Requirements EN 388 1994 Protection Against Mechanical Hazards Certification in progress MECHANICAL HAZARDS 4 Abrasion resistance out of four levels 5 Blade cut resistance out of five levels 4 Tear resistance out of four levels 4 Puncture resistance out of four levels HEAT AND FIRE EN 407 X Fire resistance out of 4 levels 1 Contact heat out of 4 levels X Convective heat out of 4 levels X Radiant heat out of 4 levels X Small molten metal projections out of 4 levels X Large molten metal projections out of 4 levels EN ISO 13997 : esult 61.4N Oil and water repellent cowhide split leather. Incorporates belt (supplied) and belt loop with Velcro side tabs for adjustment. Oil-repellent for 60 minutes and water-repellent for 100 minutes. Lining Dyneema® and Stainless-Steel composite yarn, , with1.3mm leather outer Length 56cm/22in x 37cm/14.5in wide + 20cm/8in loop Dry Clean Only Packaging: as required Available sizes: ONE STANDARD SIZE Product Code: RIPDEXLEG Product Name: RAZORPRO CHAPS DESCRIPTION & CARE Product Code : RIPDEXLEG Manufactured by ROSTAING SA, 17, avenue Charles de Gaulle 01800 Villieu Loyes Mollon, France

RAZORPRO CHAPS FT-RIPDEXLEG-GB-V1111[1] · 2018. 6. 8. · chaps& fiche technique manutention humide utilisation : chantiers, lignards, milieu humide, cablage, entretien. les "plus"

  • Upload
    others

  • View
    0

  • Download
    0

Embed Size (px)

Citation preview

Page 1: RAZORPRO CHAPS FT-RIPDEXLEG-GB-V1111[1] · 2018. 6. 8. · chaps& fiche technique manutention humide utilisation : chantiers, lignards, milieu humide, cablage, entretien. les "plus"

CHAPS  

F i c h e T e c h n i q u e

MANUTENTION HUMIDE

UTILISATION : CHANTIERS, LIGNARDS, MILIEU HUMIDE, CABLAGE, ENTRETIEN.

LES "PLUS" PRODUITS CUIR RESPIRANT, HYDROFUGE, PROTEGE-ARTERE,

ANTI-COUPURE

PERFORMANCES

NIVEAUX DE PROTECTION

WETCUT/01

DESCRIPTION & ENTRETIEN

SPECIFIC USE

- HANDLING RAZOR WIRE / BARBED WIRE - VETERINARY CLAW AND BITE PROTECTION - GLASS AND STEEL INDUSTRIES - HEAVY DUTY OUTDOOR WORK : THORN PROTECTION ,

UTILITIES. ARBORICULTURE - RECYCLING, DEMOLITION , FENCING - SHARP OBJECT HANDLING - -

EXTREMELY HIGH CUT AND PERFORATION / PUNCTURE RESISTANCE SUPER TOUGH OIL+WATER RESISTANT LEATHER AND COMPOSITE LINER

COMPLETE HAND AND LOWER ARM PROTECTION

PERFORMANCE PROTECTION LEVELS This product accessory is designed meet the same European Standards as achieved with Gauntlet RIPDEX-G under Certification delivered by the notified Organization CENTEXBEL N°033/2015/0168, the EN388 levels opposite are for information only and reflect the results of testing of the RIPDEX-G (Razorpro) Gauntlets EN 420 1994 General Requirements EN 388 1994 Protection Against Mechanical Hazards Certification in progress

MECHANICAL HAZARDS

4 Abrasion resistance out of four levels5 Blade cut resistance out of five levels4 Tear resistance out of four levels4 Puncture resistance out of four levels

HEAT AND FIRE

EN 407 X Fire resistance out of 4 levels 1 Contact heat out of 4 levelsX Convective heat out of 4 levelsX Radiant heat out of 4 levelsX Small molten metal projections out of 4 levels X Large molten metal projections out of 4 levels

EN ISO 13997 : esult 61.4N

Oil and water repellent cowhide split leather. Incorporates belt (supplied) and belt loop with Velcro side tabs for adjustment. Oil-repellent for 60 minutes and water-repellent for 100 minutes. Lining Dyneema® and Stainless-Steel composite yarn, , with1.3mm leather outer Length 56cm/22in x 37cm/14.5in wide + 20cm/8in loop Dry Clean Only Packaging: as required Available sizes: ONE STANDARD SIZE Product Code: RIPDEXLEG Product Name: RAZORPRO CHAPS

DESCRIPTION & CARE

Product Code : RIPDEXLEG

Manufactured by ROSTAING SA, 17, avenue Charles de Gaulle 01800 Villieu Loyes Mollon, France