7/25/2019 Encore Plus v 5.4 Pag 60 a 61

http://slidepdf.com/reader/full/encore-plus-v-54-pag-60-a-61 1/2

Encore Plus User Manual Issue 4

Options Menu

Show Labels in Main Window Space

This option is only available when logged onto automation, and swaps the

main Encore page between displaying the Label List or the Mix Tree.

The menu entry will change depending on what is currently displayed.

> This can also be done by pressing the spacebar on the keyboard.

The Mix Passes on screen are displayed in a number of colours:

Grey: No attributes

Green: Current Pass

Green with black border: Currently selected

Blue: A Junction or end of branch

Red: Milestone

The icons at the top of this screen only appear here and not on the MixTree screen accessed by clicking the Tree icon in the icon bar.

Increases/decreases the screen magnification.At it's lowest level, the pass numbers are not displayed on each pass.

Reduces the display so that only Milestones, junctions and ends of branches are displayed.

The presence of other passes inbetween those displayed on screen isshown with broken red lines.

Reverts the display to showing the current Tree in the top left of the

screen.

Places the current Play pass in the centre of the screen.

Marks / Unmarks a Pass as a Milestone mix.After you mark a pass as a Milestone, it will be shown in red on screen.It is not possible to delete a Milestone pass, you must first remove the

Milestone flag.

Opens a small screen so that text can be added to label significant passes.

The passes that have had text added can be viewed by right-clickinganywhere on the Mix Pass display.

A list of passes that have had text added will be displayed.To load any of these passes, click on the relevant entry in the list.

- 60 -

7/25/2019 Encore Plus v 5.4 Pag 60 a 61

http://slidepdf.com/reader/full/encore-plus-v-54-pag-60-a-61 2/2

Issue 4 Encore Plus User Manual

Opens the Load Options screen, so the various parameters for loading apass can be set.

With this icon turned on, the selected pass will be loaded without:

• the Safety Snapshot• Gangs

• Links• Automation Modes

Loads the last loaded Mix Pass so an A/B comparison can be made.

Allows you to Delete and Prune the mix tree by opening the Edit Treescreen, but will require that Automation is turned off.

Finds any subtree that may have been created in the current tree.The adjacent display box will show the name of the subtree mix once ithas been selected.

Disk Space Status Warning

The look of this screen will change depending on whether your hardwarehas FilerX with a Multilink adaptor or an SPS drive.

Regardless of the hardware considerations, it is advisable to set thiswarning to be no more than 85%, as Encore needs at least 15% slack torun the automation efficiently.

Once the drive reaches this limit, warnings will be displayed every timeyou attempt to create a New Mix or Save & Load a Mix Setup.

Should you continually ignore the warnings as they are presented,

the drive will eventually become too full to write to.

Mix/Pass Tree Options

Background ColourAllows you to select the background colour for the Mix/Pass tree displayscreen.

New Mix NameIn the Filing page when a new mix is created, this is the text that will beused (with the addition of the next available pass number) when the Nextbutton is pressed.

Auto Recovery OptionsWhat happens in the event of the system being shutdown with automationdata still held in RAM.

These three options are self-explanatory.

- 61 -