Embed Size (px)
Citation preview
FineShredders de Metso Waste Recycling
M&J FineShred 1550/3550
2
M&J FineShred 1550/3550
SPÉCIFICATIONS 1550 3550Dimensions générales avec trémie standard (L x l x H) mm 2150 x 2691 x 2778 2150 x 3361 x 2778Poids (total, avec convoyeur standard) t 14.0 18.0Couleur standard RAL 9002 RAL 9002Assemblage des couteaux sur le porte-couteaux Boulonnage Boulonnage
Données sur les couteauxNombre par arbre pcs 72 108Nombre de contre-couteaux pcs 46 70WSR 40 W. Nr. 1.2379 / X155CrMoV121 (57 - 59 HRC) mm 40 x 40 x 12 40 x 40 x 12
Capacité par heure - Matériau entrant : < 300 mm – pré-broyé – alimentation continue. Valeurs à titre indicatif seulement.
M&J FineShred 1550 jusqu‘à15 tonne/heureM&J FineShred 3550 jusqu‘à 22 tonne/heure
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
REV
TITLE
DRAWING NO SHEET
PROJECT No.
SCALE:
OF
MATERIAL No: 199845
0,0 kgIN WORK
PROJECT No.
1 1
M&J FINESHRED 1550/3550FINESHREDDER DELIVERY
STANDARD
021998451:50
MATERIAL Wt.:
This Unpublished Drawing and Content is the CONFIDENTIAL PROPERTY OF METSO, protected by Trade Secret, Copyright and other laws, and may not be used, copied or disclosed without the specific written consent of METSO. If published, the following notice shall apply: © 2016 Metso A2
MATERIAL Spec.:
CUSTOMER:
LOCATION:
HS2017-03-28DATE:
DATE: 2017-03-30BDL
RVWD:
DRN:
DATE:APPD:
DK- 8700 Horsens, DenmarkVejlevej 5Metso Denmark A/S
DO NOT SCALEFIRST ANGLEPROJECTION
Glo
bal T
empl
ate
- Rev
201
6070
1
ISO
UNR
ESTR
ICTE
D
REV DESCRIPTION OF REVISION BY APPD DATE
02 Fineshredder updated HS 2018.01.26
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS,ANGLES ARE IN DEGREES AND MINUTES, AND TOLERANCES ARE PER TABLE BELOW.
● DIMENSIONS WITHOUT SPECIFIED TOLERANCES
ACCORDING TO ISO 2768-mK AND ISO 13920-BE
● SHARP EDGES, BURRS, WELDING SLAG, WIRES AND SPATTER MUST BE REMOVED.
● GPS ACCORDING TO EN ISO 8015
2318
13001780
955
2111
3331
3729
24401770 /
34732803 /
2738
1605
1470 21
30
1375
541
139622
07
20171347 /
600
600
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
REV
TITLE
DRAWING NO SHEET
PROJECT No.
SCALE:
OF
MATERIAL No: 199845
0,0 kgIN WORK
PROJECT No.
1 1
M&J FINESHRED 1550/3550FINESHREDDER DELIVERY
STANDARD
021998451:50
MATERIAL Wt.:
This Unpublished Drawing and Content is the CONFIDENTIAL PROPERTY OF METSO, protected by Trade Secret, Copyright and other laws, and may not be used, copied or disclosed without the specific written consent of METSO. If published, the following notice shall apply: © 2016 Metso A2
MATERIAL Spec.:
CUSTOMER:
LOCATION:
HS2017-03-28DATE:
DATE: 2017-03-30BDL
RVWD:
DRN:
DATE:APPD:
DK- 8700 Horsens, DenmarkVejlevej 5Metso Denmark A/S
DO NOT SCALEFIRST ANGLEPROJECTION
Glo
bal T
empl
ate
- Rev
201
6070
1
ISO
UNR
ESTR
ICTE
D
REV DESCRIPTION OF REVISION BY APPD DATE
02 Fineshredder updated HS 2018.01.26
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS,ANGLES ARE IN DEGREES AND MINUTES, AND TOLERANCES ARE PER TABLE BELOW.
● DIMENSIONS WITHOUT SPECIFIED TOLERANCES
ACCORDING TO ISO 2768-mK AND ISO 13920-BE
● SHARP EDGES, BURRS, WELDING SLAG, WIRES AND SPATTER MUST BE REMOVED.
● GPS ACCORDING TO EN ISO 8015
2318
13001780
955
2111
3331
3729
24401770 /
34732803 /
2738
1605
1470 21
30
1375
541
139622
07
20171347 /
600
6001
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
REV
TITLE
DRAWING NO SHEET
PROJECT No.
SCALE:
OF
MATERIAL No: 199845
0,0 kgIN WORK
PROJECT No.
1 1
M&J FINESHRED 1550/3550FINESHREDDER DELIVERY
STANDARD
021998451:50
MATERIAL Wt.:
This Unpublished Drawing and Content is the CONFIDENTIAL PROPERTY OF METSO, protected by Trade Secret, Copyright and other laws, and may not be used, copied or disclosed without the specific written consent of METSO. If published, the following notice shall apply: © 2016 Metso A2
MATERIAL Spec.:
CUSTOMER:
LOCATION:
HS2017-03-28DATE:
DATE: 2017-03-30BDL
RVWD:
DRN:
DATE:APPD:
DK- 8700 Horsens, DenmarkVejlevej 5Metso Denmark A/S
DO NOT SCALEFIRST ANGLEPROJECTION
Glo
bal T
empl
ate
- Rev
201
6070
1
ISO
UNR
ESTR
ICTE
D
REV DESCRIPTION OF REVISION BY APPD DATE
02 Fineshredder updated HS 2018.01.26
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS,ANGLES ARE IN DEGREES AND MINUTES, AND TOLERANCES ARE PER TABLE BELOW.
● DIMENSIONS WITHOUT SPECIFIED TOLERANCES
ACCORDING TO ISO 2768-mK AND ISO 13920-BE
● SHARP EDGES, BURRS, WELDING SLAG, WIRES AND SPATTER MUST BE REMOVED.
● GPS ACCORDING TO EN ISO 8015
2318
13001780
955
2111
3331
3729
24401770 /
34732803 /
2738
1605
1470 21
30
1375
541
139622
07
20171347 /
600
600
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
REV
TITLE
DRAWING NO SHEET
PROJECT No.
SCALE:
OF
MATERIAL No: 199845
0,0 kgIN WORK
PROJECT No.
1 1
M&J FINESHRED 1550/3550FINESHREDDER DELIVERY
STANDARD
021998451:50
MATERIAL Wt.:
This Unpublished Drawing and Content is the CONFIDENTIAL PROPERTY OF METSO, protected by Trade Secret, Copyright and other laws, and may not be used, copied or disclosed without the specific written consent of METSO. If published, the following notice shall apply: © 2016 Metso A2
MATERIAL Spec.:
CUSTOMER:
LOCATION:
HS2017-03-28DATE:
DATE: 2017-03-30BDL
RVWD:
DRN:
DATE:APPD:
DK- 8700 Horsens, DenmarkVejlevej 5Metso Denmark A/S
DO NOT SCALEFIRST ANGLEPROJECTION
Glo
bal T
empl
ate
- Rev
201
6070
1
ISO
UNR
ESTR
ICTE
D
REV DESCRIPTION OF REVISION BY APPD DATE
02 Fineshredder updated HS 2018.01.26
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS,ANGLES ARE IN DEGREES AND MINUTES, AND TOLERANCES ARE PER TABLE BELOW.
● DIMENSIONS WITHOUT SPECIFIED TOLERANCES
ACCORDING TO ISO 2768-mK AND ISO 13920-BE
● SHARP EDGES, BURRS, WELDING SLAG, WIRES AND SPATTER MUST BE REMOVED.
● GPS ACCORDING TO EN ISO 8015
2318
13001780
955
2111
3331
3729
24401770 /
34732803 /
2738
1605
1470 21
30
1375
541
139622
07
20171347 /
600
600
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
REV
TITLE
DRAWING NO SHEET
PROJECT No.
SCALE:
OF
MATERIAL No: 199845
0,0 kgIN WORK
PROJECT No.
1 1
M&J FINESHRED 1550/3550FINESHREDDER DELIVERY
STANDARD
021998451:50
MATERIAL Wt.:
This Unpublished Drawing and Content is the CONFIDENTIAL PROPERTY OF METSO, protected by Trade Secret, Copyright and other laws, and may not be used, copied or disclosed without the specific written consent of METSO. If published, the following notice shall apply: © 2016 Metso A2
MATERIAL Spec.:
CUSTOMER:
LOCATION:
HS2017-03-28DATE:
DATE: 2017-03-30BDL
RVWD:
DRN:
DATE:APPD:
DK- 8700 Horsens, DenmarkVejlevej 5Metso Denmark A/S
DO NOT SCALEFIRST ANGLEPROJECTION
Glo
bal T
empl
ate
- Rev
201
6070
1
ISO
UNR
ESTR
ICTE
D
REV DESCRIPTION OF REVISION BY APPD DATE
02 Fineshredder updated HS 2018.01.26
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS,ANGLES ARE IN DEGREES AND MINUTES, AND TOLERANCES ARE PER TABLE BELOW.
● DIMENSIONS WITHOUT SPECIFIED TOLERANCES
ACCORDING TO ISO 2768-mK AND ISO 13920-BE
● SHARP EDGES, BURRS, WELDING SLAG, WIRES AND SPATTER MUST BE REMOVED.
● GPS ACCORDING TO EN ISO 8015
2318
13001780
955
2111
3331
3729
24401770 /
34732803 / 27
38
1605
1470 21
30
1375
541
139622
07
20171347 /
600
600
3
M&J FineShred 1550/3550
Arbres 1550 3550Nombre d‘arbres pcs 1 1Longueur / Diamètre mm 1350 2020Nombre de couteaux pcs 72 108Vitesse de rotation standard rpm 100-280 100-280
Bloc d‘alimentation 1 x 200 kW 1 x 250 kWDimensions générales (L x l x H) mm 3331 x 1470 x 1488 3331 x 1470 x 1488Poids sans huile hydraulique t 2.5 3.7Zone d‘entretien minimale recommandée mm 1000 1000Capacité de refroidissement kW 50 60Puissance kW 200 250Principe d‘entraînement Transmission hydrostatique Transmission hydrostatique
Porte-couteaux auto-centrés et résistants aux chocs
Tolérance de coupe de 0,3 mm Aucune pression exercée sur la grille
Vaste zone de coupe
Poussoir à gravité
Entraînement hydraulique
Vaste surface opérationnelle de tamisage
Arbre à vitesse variable
Arbre multi-faces
www.metso.com/recycling
Nous nous réservons le droit de procéder sans préavis à des modifications et à des améliorations, ”M&J FineShred 1550-3550”. Juillet 2017
Pour de plus amples informations, prenez contact avec votre représentant local Metso Recycling ou directement avec votre revendeur.
Metso Waste Recycling Vejlevej 5 DK-8700 Horsens Denmark Tel: +45 7626 6400 Fax: +45 7626 6449 [email protected]
