Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
Chevrolet/GMCFULL SIZE TRUCK � 1/20
CHEVROLET/GMC i209-GM Installation Manual� Model: Full Size Truck� Model Year: 2014-UP(BOSE® Sound System requires KCX-BOSE-GM which is sold separately)
Introduction�Congratulations on purchasing the i209-GM. This installation manual is designed to take you through the step-
by-step installation of the i209-GM into a 2014 and up Chevrolet Silverado / GMC Sierra. Please familiarize yourself with the owners manual and if you still have additional questions please call 1-800-TECH-101.
Note
�Design and specifications are subject to change without notice for improvement.
To Ensure Safe Use, Always Follow These Precautions�The installation of this product requires specialized skills and experience. We recommend that you have the
product installed by the store that you purchased it from.�Before you use this product, be sure to carefully read this installation manual and the separate user's manual
so that you can use the product correctly. Alpine Electronics bears no responsibility for problems that arise as a result of failure to follow the instructions in the manuals.
�This manual includes a number of symbols that are intended to help you use the product safely, to prevent harm to you and others, and to protect against damage to property. These symbols and their meanings are listed below. Make sure you fully understand these symbols before you begin reading the main text.
Explanations of Injury and Damage That May Result from Incorrect Use
WarningIgnoring the content marked by this indication and using the product incorrectly is expected to lead to death or serious injury.
CautionIgnoring the content marked by this indication and using the product incorrectly is only expected to lead to injury or property damage.
CHEVROLET SILVERADO
Model Year
WT, LS, LT, LT Z71, LTZ, LTZ Z71 2014-UP
GMC SIERRA SIERRA, SLE, SLT 2014-UP
* The specified vehicles have been tested and have met compatibility specs at the time of testing. Compatibility is not guaranteed if the manufacturer has made production changes to the listed vehicles above.
Warning: Before you begin wiring, remove the ground wire from the negative terminal of the battery. Failing to do so could lead to electric shock, injury or improper product operation.
Chevrolet/GMCFULL SIZE TRUCK � 2/20
Types of Precautions
Forbidden
Indicates actions that are forbidden (must not be performed)
Mandatory
Indicates actions that are mandatory (must be performed)
Forbidden
Indicates that disassembly is forbidden.
Marks content that should receive your full attention.
Warning
Do not disassemble or modify the product. Doing so could lead to an accident, fire, or electric shock. Forbidden
Store screws and other small objects where small children cannot reach them. If one of these small objects is swallowed, consult with a doctor immediately.
When replacing fuses, be sure to use fuses with the specified current rating. Failing to do so could lead to an accident or fire. Forbidden Mandatory
Only connect the product to a 12 VDC negative ground car. Failing to do so could lead to an accident or fire. Mandatory
Before you begin wiring, remove the ground wire from the negative terminal of the battery. Failing to do so could lead to electric shock or injury.
Do not cut the insulation on a cord and take power from another device. Doing so could lead to fire or electric shock. Forbidden
Do not install the product in a location where it will obstruct the driver’s forward view; interfere with the operation of the steering wheel, gearshift, or the like; or pose a threat to passengers. Doing so could lead to an accident or injury. Forbidden
Chevrolet/GMCFULL SIZE TRUCK � 3/20
When making a hole in the vehicle body, be careful to avoid damaging pipes, the fuel tank, electrical wiring, and the like. This kind of damage could lead to an accident or fire.
When installing and grounding the product, do not use any of the bolts or nuts of the steering wheel, brakes, fuel tank, or the like. Doing so could make the brakes stop working or lead to fire. Forbidden
Do not install the product near the passenger-side airbag. Doing so could interfere with the operation of the airbag and lead to an accident or injury. Forbidden
Bundle cords so that they don’t interfere with driving. Wrapping cords around the steering wheel, gearshift, brake pedal, or the like, could lead to an accident or damage equipment.
Caution
Connect the product properly according to the instructions. Failing to do so could lead to fire or an accident. Forbidden
Do not sandwich cords between the seat railing or allow them to touch protrusions. Resulting breaks or shorts could lead to electric shock or fire.
Do not block vents or heat sinks. Doing so could lead to fire or damage equipment.
Use the accessories according to the instructions, and attach them securely. Failing to do so could lead to an accident or damage equipment. Forbidden
Do not install the product where it may be exposed to water or in a place with high levels of humidity or dust. Doing so could lead to fire or damage equipment. Forbidden
The installation and wiring of this product requires specialized skills and experience. Have the product installed and wired by the store that you purchased it from.
Chevrolet/GMCFULL SIZE TRUCK � 4/20
Tools Required
Panel Removing Tool Pliers T15 Torx Screwdriver
#2 Phillips Screwdriver 7mm Screwdriver Wire Cutters
7mm
10mm Socket Extension Ratchet
Accessory ListSource Unit Box Parts (i209-G)
i209-G Source Unit Display Cable HDMI Cable Bracket
8mm x 4 Screws GPS Antenna USB Extension Cable
Pre Out Harness Direct Camera Adapter Bluetooth Microphone
Chevrolet/GMCFULL SIZE TRUCK � 5/20
Installation Kit Parts (G-KTX-i209-GM)
Radio Dash Bezel With Monitor Key Harness (With Optional Add-on Microphone Interface)
Source Unit Mounting Brackets
iDatalink Maestro Parts (ALP-MRR V3.0/ALP-HRN-GM4)
Main Harness Antenna Adapter Factory Camera Harness
SiriusXM Radio Antenna Adapter Maestro USB Update Cable OBDII T-Harness
Chime Speaker Adapter Harness Work Truck Adapter Harness
BACK UP CAMERA
BACK UP CAMERA
iDatalink Maestro Module
Chevrolet/GMCFULL SIZE TRUCK � 6/20
Programming the iDatalink Maestro Module
1 INSTALL THE WEBLINK PLUG-INGo to: idatalinkmaestro.com/plugin and follow the installation steps.
The Maestro module must be programmed specifically for each vehicle and radio. Take care to enter the correct vehicle information, factory options, head unit model, and head unit serial number. The head units serial number is an alphanumeric value which is found on the head units label, underneath the bar code.
Review the System Requirements before installing.
If the plugin is already installed, the caution, “The plugin is already installed” appears. Please skip to step 2.
3 CONNECT YOUR MAESTRO MODULEUse your Maestro module to connect to your PC.
5 PROGRAM YOUR MODULEFollow the programming steps for your vehicle.
2 REGISTER A WEBLINK ACCOUNTGo to:idatalinkmaestro.com/register and complete the registration process.
A confirmation email will be sent to you requiring validation.
For existing customers, click log in.
4 LOG INTO WEBLINKGo to:idatalinkmaestro.com/login.Enter your username and password, then click OK.
6 Once Programing is complete “FLASHING COMPLETED!” will be displayed.
Proceed to the next page to complete installation.
NOTE: If serial number is invalid, Call ADS at 1-866-427-2999 with the serial number.
Chevrolet/GMCFULL SIZE TRUCK � 7/20
Factory Radio Removal Procedure1 Disconnect the ground wire from the negative
terminal of the battery.
2 Using panel removing tool, unsnap and remove center dash trim piece from around the radio and climate controls.
MENU
TEMP
BACK
RADIO
MEDIA
A/C
3 Remove (4) 7mm screws from the radio and climate control bezel.
MENU
TEMP
BACK
RADIO
MEDIA
A/C
4 Disconnect and remove the radio tuner by lifting the center tab. Use a pair of pliers to remove the FM and SXM antenna connectors. Remove the CD player by extracting (2) 7mm factory screws.
5 Remove the climate control module by carefully unclipping it from factory panel. (This will later be installed into the restyle bezel).
6 Extract (2) T15 Torx screws and unsnap the knee cover on the driver side.
7 Unsnap the steering wheel lever and remove the lower cover from the steering wheel column.
Chevrolet/GMCFULL SIZE TRUCK � 8/20
1 Remove the passenger’s side top and bottom glove box compartments by extracting (6) T15 Torx screws.
2 Unclip the USB cable from the metal bar support and disconnect the green connector from the HMI box (may not be available on the center console equipped truck)
3 For trucks equipped with glove box USB, the included adapter can be plugged into the USB that is connected to the HMI box.
Glove box USB
4 Remove the bottom tab on the green USB connector using a razor blade. (This will allow the OEM USB adapter to connect properly.)
1 Vehicles that have the USB port in the glove box can use the included adapter to integrate that one USB port to the head unit.
2 Vehicles that have the factory Bose audio system will have a pair of USB ports in the dash. Use the USB case that is included with the KCX-BOSE-GM module to replace the OEM USB ports with the aftermarket case and extension that plugs into the back of the head unit.
3 For all other vehicles, run the included USB extension to either the center console or glove box (which ever is the preferred location). Using a 3rd party piece (sold separately) like the PAC HDMI-USB-CBL is recommended. https://pac-audio.com/catalog/radio-replacement/hdmi-usb-cbl
4 The OEM USB ports in the center console will have no connectivity to the head unit. They will only be able to charge devices.
USB Port Integration Overview
USB Port Integration For Glove Box
Chevrolet/GMCFULL SIZE TRUCK � 9/20
Component Locations
GPS Antenna
i209-G Source Unit
OEM Camera Connector
Steering Wheel Harness
OBDII Connector Sirius XM Tuner (sold separately)
GPS Antenna Installation IMPORTANT: Follow the GPS installation procedure shown below. Failure to do so, will result in poor GPS performance for CarPlay and Android Auto.
Place the GPS antenna on the center of the self adhesive 45mm X 45mm metal plate.
Keep the GPS antenna cable away from the FPD(Display),Maestro module and SXM tuner as these generate interference and will decrease GPS performance. IMPORTANT: The excess GPS antenna cable needs to be bundled and secured to the left side of the dash
Route the GPS antenna cable down to the knee cover area through the opening below left side air vent.
SXM Tuner
Tape the GPS antenna cable along the steering wheel column cover.
Mae
stro
Place the Maestro module parallel to the Right side vent.
SXM tuner location (SXM Tuner sold separately) Note: Always mount SXM tuner away from the i209-G and GPS antenna cable. Route the cable along the right side vent to reduce interference.
Optional Bluetooth Microphone
Chevrolet/GMCFULL SIZE TRUCK � 10/20
Installation Instructions1 Connect the steering wheel T-harness/OBDII
connector extension and route the cable to the radio location.
OBDII Connector
SW T-Harness
2 Slide the i209-G radio tuner into the factory tuner location and connect it to the main harness. The unit must be installed in the orientation indicated in the illustration.
3 Attached the updated Maestro module to the main harness and plug the main harness to the vehicle. The Maestro module should be mounted parallel to the right vent as shown on page 9.
maestro
4 Connect the HVAC controller T-harness (which is part of the main harness). Refer to wiring diagram on page 12 for detailed connections.
5 Connect the i209-G to the main harness and antenna connections. Refer to wiring diagram on pages 12 and 13 for detailed connections.
6 Attach the factory HVAC controller by clipping it to the i209-G Restyle bezel.
Chevrolet/GMCFULL SIZE TRUCK � 11/20
Installation Instructions7 Connect the i209-G display, power, and climate
cables and snap into place. Also, choose desired button illumination to better match that of your factory illumination by selecting either red or blue by sliding the switch.
Display Cable Power
Key HarnessClimate Control
8 Secure the i209-G restyle bezel using (4) 7mm factory screws and the 2 clips on the sides.
9 Attach the factory side vents cover by snapping in the 10 clips on the back.
A/C
10 Connect the battery terminal and begin the i209-GM setup. After i209-GM is powered on refer to page 19 for setup procedures.
Exploded-View Diagram
TEMP
A/C
OEM Climate Controller
OEM Bezel
Button Color
Chevrolet/GMCFULL SIZE TRUCK � 12/20
To Vehicle Connectors
CAN I/F
GPS
USB
EXT. KEY W.REMOTE POWER
SXM/DAB
PRE OUT
DISP. OUT
HDMI IN HDMI OUT
ANTENNA
iDatalink MAESTRO Module
18-p
in B
lack
Co
nn
ecto
r
10-p
in B
lack
Co
nn
ecto
r3-
pin
Bla
ckC
on
nec
tor
(Au
dio
)
10-p
in G
reen
Co
nn
ecto
r(V
ehic
le s
ign
als)
3-p
in B
lack
Co
nn
ecto
r(P
ow
er)
4-p
in B
lack
Co
nn
ecto
r(D
ata)
Steering WheelT-Harness
10-pin BlackConnector
To OBDII ConnectorPower
Speaker20-pin TanConnector
OEM Audio20-pin Gray Connector
Mai
n H
arn
ess
Blue Power Antenna
Blue/White Amp Turn-on
Direct Camera Plug
External Display Power
AUX Power Connector
AUX Power Connector
Power Harness
Remote Harness
HVAC ControlT-Harness
Brown Rear Mon. Remote Out
Brown/White Rear Mon. Remote In
To ClimateController
To SteeringWheel
Cut loop when connecting HDMI interface box.
Black - Ground
Yellow -12V+
Red - Acc 12V+
10-pin GrayConnector
Direct Camera Adapter
OEM Camera Adapter12-pin Gray Connector
Chime Speaker
HDMI IN 1 HDMI IN 2HDMI OUT USB POWER
POWER
KCX-630HD (Optional) HDMI Selector Interface
Remote In
DVE-5300 DVD PLAYER
Key Harness
i209-G
HDMI OutOpt. Out
Black - Ground
Yellow -12V+
Red - Acc 12V+
There’s two harnessesincluded. One for the work truck and one forthe standard truck.Only one is used for theinstallation.
Wires Not In Plugs
Brown Remote Out
Red/White DVD Status
Brown/White Rear Mon. Remote In
* If using KAC-001
see page 17
Ext
ern
al M
icro
ph
on
e
Optional: Leave connected touse built-in mic. Disconnect,plug in mini-jack, and run cableto use external mic for betterperformance.
Back Up Camera
Back Up Camera
PowerSpeaker
16-pin GreenConnector
OEM Audio20-pin Gray Connector
**See page 16
HDMI/USBExtension Cable
PAC HDMI-USB-CBLRecommended (Sold Seperately)
For iPhone the Lightning to HDMI adapter
is required
For Android users mostAndroid phones do not have HDMI adapters.
The easiest way to connect is with a Miracast adapter(for example a Roku Stick or Amazon Firestick).
For all phones the USBpower source needs to be a 2A source. This willrequire a separate USB
power source to be installedin the vehicle. Do not plug
this into the head unit’s USB.Mic Input Integrated Mic
18-PinChime10-Pin
3-Pin 4-Pin 3-Pin 4-Pin
BlueNot
Used
RedNot
Used
ResetButton
10-Pin
ChimeAdapter
DISPLAY MONITOR
HARD KEY BUTTONS
CLIMATE CONTROLLER
To select red or blue buttonillumination move this switch tothe left or right. In the setupmenu the background colorof the screen can be changed.This is shown on page 19, step #7.
i209-GM Wiring Diagram
Chevrolet/GMCFULL SIZE TRUCK � 13/20
To Vehicle Connectors
CAN I/F
GPS
USB
EXT. KEY W.REMOTE POWER
SXM/DAB
PRE OUT
DISP. OUT
HDMI IN HDMI OUT
ANTENNA
iDatalink MAESTRO Module
18-p
in B
lack
Co
nn
ecto
r
10-p
in B
lack
Co
nn
ecto
r3-
pin
Bla
ckC
on
nec
tor
(Au
dio
)
10-p
in G
reen
Co
nn
ecto
r(V
ehic
le s
ign
als)
3-p
in B
lack
Co
nn
ecto
r(P
ow
er)
4-p
in B
lack
Co
nn
ecto
r(D
ata)
Steering WheelT-Harness
10-pin BlackConnector
To OBDII ConnectorPower
Speaker20-pin TanConnector
OEM Audio20-pin Gray Connector
Mai
n H
arn
ess
Blue Power Antenna
Blue/White Amp Turn-on
Direct Camera Plug
External Display Power
AUX Power Connector
AUX Power Connector
Power Harness
Remote Harness
HVAC ControlT-Harness
Brown Rear Mon. Remote Out
Brown/White Rear Mon. Remote In
To ClimateController
To SteeringWheel
Cut loop when connecting HDMI interface box.
Black - Ground
Yellow -12V+
Red - Acc 12V+
10-pin GrayConnector
Direct Camera Adapter
OEM Camera Adapter12-pin Gray Connector
Chime Speaker
HDMI IN 1 HDMI IN 2HDMI OUT USB POWER
POWER
KCX-630HD (Optional) HDMI Selector Interface
Remote In
DVE-5300 DVD PLAYER
Key Harness
i209-G
HDMI OutOpt. Out
Black - Ground
Yellow -12V+
Red - Acc 12V+
There’s two harnessesincluded. One for the work truck and one forthe standard truck.Only one is used for theinstallation.
Wires Not In Plugs
Brown Remote Out
Red/White DVD Status
Brown/White Rear Mon. Remote In
* If using KAC-001
see page 17
Ext
ern
al M
icro
ph
on
e
Optional: Leave connected touse built-in mic. Disconnect,plug in mini-jack, and run cableto use external mic for betterperformance.
Back Up Camera
Back Up Camera
PowerSpeaker
16-pin GreenConnector
OEM Audio20-pin Gray Connector
**See page 16
HDMI/USBExtension Cable
PAC HDMI-USB-CBLRecommended (Sold Seperately)
For iPhone the Lightning to HDMI adapter
is required
For Android users mostAndroid phones do not have HDMI adapters.
The easiest way to connect is with a Miracast adapter(for example a Roku Stick or Amazon Firestick).
For all phones the USBpower source needs to be a 2A source. This willrequire a separate USB
power source to be installedin the vehicle. Do not plug
this into the head unit’s USB.Mic Input Integrated Mic
18-PinChime10-Pin
3-Pin 4-Pin 3-Pin 4-Pin
BlueNot
Used
RedNot
Used
ResetButton
10-Pin
ChimeAdapter
DISPLAY MONITOR
HARD KEY BUTTONS
CLIMATE CONTROLLER
To select red or blue buttonillumination move this switch tothe left or right. In the setupmenu the background colorof the screen can be changed.This is shown on page 19, step #7.
Chevrolet/GMCFULL SIZE TRUCK � 14/20
i209-GM Wiring Diagram
Power cable
W.REMOTE cableDVD REMOTE
(Brown)
MON REMOTE
(Brown)
REMOTE IN
(Brown/White)
REMOTE OUT
(Brown)
SUBW
FRONT OUT
REAR OUT
To remote control input lead of DVE-5300
To remote control input lead of Rear Monitor
To remote control output lead
To remote control input lead
To steering remote control interface box
Microphone (Included)
To input terminal of ampli�er when adding an external ampli�er
PRE OUT cable
Interface cable
DVD STATUS IN
(Red/White)To remote control output lead of DVE-5300
SPEED SENSOR
To SiriusXM Tuner
(Green/White)
CAMERA
IDATALINK I/F
AUX INPUT
REMO
(Blue/White)
REVERSE(Orange/White)
P. ANT
(Blue)
PARKING BRAKE
(Yellow/Blue)
(Green)
(Green/Black)
(White)
(White/Black)
(Gray/Black)
(Gray)
(Violet/Black)
(Violet)
ACC(Red)
BATT
(Yellow)GND
(Black)
Vehicle Antenna
GPS Antenna (Included)
To the vehicle speed pulse line
To Front, Rear or Side camera
To iDataLink module
To AUX output device or iDataLink module
To ampli�er or equalizer
To plus side of the back lamp signal lead of the car
To power antenna
To the parking brake signal lead
Rear Left
Front Left
Front Right
Rear Right
Speakers
Battery
Ignition key
Chevrolet/GMCFULL SIZE TRUCK � 15/20
Wire Harness Pin Outs
Cam Aux Data
1 23
911131517
4
81012141618
57
6
Red 22AWGBlue 22AWGBlack 22AWGWhite 22AWGWhite 22AWGBlue 22AWGBlack 22AWGRed 22AWG
Black 22AWGBlack 22AWGWhite 22AWGGreen/White 22AWGRed 22AWG
12345678
910111213141516
Radio MainBlue 22AWGRed 20AWGBlue/White 22AWGOrange/White 22AWGYellow/Blue 22AWG Purple 20AWGGray 20AWGPurple/Black 20AWGGray/Black 20AWGGreen 20AWGWhite 20AWGGreen/Black 20AWGWhite/Black 20AWGYellow 18AWGBlack 18AWG
123456
Direct Camera
Black 22AWG
Black 22AWGRed 22AWG
Blue 22AWGBlack 22AWG
White 22AWG
13579
11
2468
1012
Remote Harness
Red/White 22AWG
Brown 22AWG
4
6
8
2
7
5
3
1
Display Power
Black/Silver 22AWGBrown/Silver 22AWGBlack/Silver 22AWG
Yellow 22AWGPink 22AWG
123
AUX PowerYellow 18AWG
Red 18AWG
Black 18AWG
Data SWC
121113 14
161517 18
1 2436587
9 10
Brown/Red 22AWGBrown/Yellow 22AWG
Red/Brown 22AWGYellow/Brown 22AWG
Yellow/Black 22AWG 1 2436587
9 10
Audio In
White/Red 22AWGWhite/Brown 22AWGGrey/Red 22AWGWhite/Brown 22AWG
4687
9 10
1 235
Radio I/O (Green)
Yellow/Black 22AWG
Black/Yellow 22AWG
Green/White 22AWGYellow/Blue 22AWG
Blue/White 22AWG
123 Yellow 18AWG
Red 18AWG
Black 18AWG
Power/ACC
4
123
iDatalink
Blue 22AWG
White 22AWG
Black 22AWG
Red 22AWG
123
Audio Out
Red 22AWG
White 22AWG
Black 22AWG
GM Harness YellowBlack 20AWGYellow 20AWG
White 20AWG
Purple/Black 20AWGPurple 20AWG
Yellow 18AWGBlack 18AWG
1234
GM Harness Green
Purple 20AWGPurple/Black 20AWGGreen 20AWGGreen/Black 20AWG
Speaker Harness Rear
1234
Gray 20AWGGray/Black 20AWGWhite 20AWGWhite/Black 20AWG
Speaker Harness Front
White 22AWGBlack 22AWG
Tan/Red 22AWGTan/Brown 22AWG
Orange/White 22AWG
12345678
910111213
141516
Green/Black 20AWGGreen 20AWG
Gray/Black 20AWGGray 20AWG
White/Black 20AWGWhite 20AWG
123456789
10
11121314151617181920 Gray Red 22AWG
Tan/Red 22AWG
White/Red 22AWGTan/Brown 22AWG
White/Brown 22AWG
Black/Yellow 22AWG
Black 22AWG
Yellow 22AWGGreen/White 22AWGBlack 22AWG
12345
11121314151617181920
76
8910
White/Black 20AWGGray 20AWG
Gray/Black 20AWGGreen/Black 20AWGGreen 20AWGPurple/Black 20AWGPurple 20AWG
12345
11121314151617181920
76
8910
Gray/Red 22AWGTan/Red 22AWGWhite/Red 22AWGTan/Brown 22AWGWhite/Brown 22AWGBlack/Yellow 22AWG
Yellow 22AWGBlack 22AWGGreen/White 22AWG
Yellow 20AWGBlack 20AWG
10
12345
6
89
7
Tan/Red 22AWG
Black 20AWGYellow 20AWG
Tan/Brown 22AWGWhite/Red 22AWGWhite/Brown 22AWGGray/Red 22AWGBlack/Yellow 22AWG
Green/White 22AWG
Adapter Harness
4
123
65
Black 22AWG
Yellow 22AWG
Back Up Camera
12
34
56
78910
1112
Yellow 22AWG
White/Red 22AWGWhite/Green 22AWG
Black 22AWG
White/Green 22AWGWhite/Red 22AWG
Camera Harness
123
OBD/SWC
Brown/Yellow 22AWG
Green/Black 22AWG
Brown/Red 22AWG
Chevrolet/GMCFULL SIZE TRUCK � 16/20
OEM Camera Retention
1 Alpine aftermarket head units provide the ability to monitor your cargo while towing via the Direct Camera hard key. On the 2014-up Silverado/Sierra, the OEM camera will only turn ON while the vehicle is running and in REVERSE. This means when pushing the Direct Camera hard key it will not display the camera video. Follow the steps below to solve the issue.
2 Locate the camera connector under the rear bumper electrical block.
3 Cut the WHITE wire in pin 3.
4 Tape or heat shrink the vehicle side of the wire.
5 The side going to the camera needs to be tapped onto the RED wire in pin 1.
2014-2015 2016-2017
1. Red2. Yellow3. White4. Black5. Black6. Brown
1. Red2. Yellow3. White4. White5. Black6. Black7. Brown8. Black
OEM Camera Retention When Not In Reverse
13
46
14
58
TanGreen Gray Gray
2 Work trucks and trucks with the IO3 OEM system do not have the HMI box behind the glove box. Instead the camera connection is in the adapter harness as shown on page 12. Plug that harness into the direct camera input coming off the main harness.
BACK UP CAMERABACK UP CAMERA
1 For trucks equipped with OEM camera, disconnect the Gray 12-pin connector from the HMI box and connect it to the OEM Camera adapter.
OEM Camera
Work TruckIO3 Truck
Chevrolet/GMCFULL SIZE TRUCK � 17/20
Connection Of KAC-001
4 PinBlack Data
POWER RESET HEADUNIT CAN OUTPUT UPDATE
BATT* (Yellow)Output 1 (Purple)
Output 2 (White/Red)
Output 3 (Brown)
Output 4 (Blue)
Output 5 (Green)
Output 6 (Pink)
Output 7 (White)
Output 8 (Gray)
Connect to Relay/output to accessories (Sold separately)
ResetButton
Inte
rfac
e H
arn
ess
(4-p
in W
hit
e)
Po
wer
Har
nes
s (3
-pin
Wh
ite)
8ch
Ou
tpu
t H
arn
ess
(24-
pin
Wh
ite)
Inte
rfac
e C
able
(4-
pin
)(i
ncl
ud
ed w
ith
AD
S m
od
ule
)
USB port (Firmware
updates only)
ACC (Red)
GND (Black)*Fuse Rating: 7A
To 4 Pin Black Data
Connect to IDATALINK I/Fcable from head unit. This is
the 4 pin data connector shown on page 12 in the installation diagram thatcomes directly off of the
main harness
Mai
n H
arn
ess
3 PinBlack
4 PinBlue
10 PinGreen
3 PinBlack
NotUsed
To Head Unit
Maestro Module Side View
KAC-001 Side View
Chevrolet/GMCFULL SIZE TRUCK � 18/20
Connection Of A SiriusXM Module (Sold Separately)
SXM/DAB
CAN I/F USB
HDMI IN HDMI OUT
POWERW. REMOTEPRE OUT
GPS
SiriusXmconnect
For vehicles with factory SiriusXM connect the adapter to the factory SiriusXM antenna in the radio cavity. For vehicles without factory SiriusXM use the antenna that is included with the SXV300 SiriusXM Tuner. Please note, as stated in the title this tuner is sold separately. Please visit you local authorized Alpine dealer to make the purchase https://alpine-usa.com/stores
Connection Of An External Amplifier
Remote Turn-On Lead (Blue/White)
Subwoofer RCA Connectors
Front Output RCA Connectors
Rear Output RCA Connectors
RCA Extension Cable (sold separately)
(Blue/White)
REMOTE ON
(Blue/White)
Subwoofer
REMOTE
Ampli�er for subwoofer (sold separately)
To subwoofer input terminal
(Red)
(White)
SUBW
FRONT OUT
REAR OUT
To front input terminal
Ampli�er 4 ch (sold separately)
To rear input terminal
Front speaker
Rear speaker
REMOTE ON
(Blue/White)
(Red)
(White)
(Red)
(White)
CAN I/F
GPS
USB
W.REMOTE POWER
SXM/DAB
PRE OUT
HDMI IN HDMI OUT
ANTENNA
i209-G Source Unit
Chevrolet/GMCFULL SIZE TRUCK � 19/20
Set Up Guide1 Turn the vehicle’s Ignition switch to ACC.
2 Turn ON the i209-GM by pressing any key.
3 Select the user language and press OK.
4 With the vehicle parked, engage the parking brake, release the parking brake and engage the parking brake again.
5 If a camera is present, turn it ON in the system menu. (MENU/SETUP/SYSTEM/CAMERA/CAMERA SELECT)
6 AUDIO MUTE ON REVERSE- By default, when the vehicle is shifted into reverse the AUDIO will MUTE. If this feature is not desired turn it off in the AUDIO MENU (MENU/SETUP/SOUND/MUTE WHILE BACKING UP)
7 Select the desired screen color to match the button illumination. (MENU/ SYSTEM/GENERAL/DISPLAY/KEY/SCREEN COLOR)
8 When the KCX-630HD (HDMI SELECTOR) is present be sure to turn it ON in the SETUP MENU. (MENU/ SYSTEM/EXTERNAL ACCESSORIES/HDMI SELECTOR)
9 Set the DVD player (if optional DVD player is installed). (MENU/SETUP/SOURCE/HDMI).
10 When the KAC-001 (External Accessory Control Module) is present be sure to turn it ON in the SETUP MENU. (MENU/SYSTEM/EXTERNAL ACCESSORIES/EXTERNAL ACCESSORY CTRL)
11 Vehicle information- Set the desired gauge information. (MENU/VEHICLE INFO/GAUGES/CAR SETTINGS)
Troubleshooting Guide
Symptom Possible Cause Remedy
1 Drivers Information Center in instrument cluster does not show music or navigation information.
The i209-GM can’t push data to a factory screen.
The screen will still work for other vehicle related functions (like mileage, etc) but there is no way to push audio information to an OEM screen.
2
Hub Not Supported message on the screen.
The i209-GM does not support USB Hubs.
Use the included USB extension and run that to the glove box or center console.
If the vehicle has the factory Bose system the USB insert can be used in the dash that comes with the KCX-BOSE-GM (sold separately).
If the vehicle has the glove box USB from the OEM system that can be integrated as shown in the manual.
3
iPhone not working with HDMI.
Not using Apple HDMI to Lightning adapter.
Purchase the HDMI to Lightning adapter directly from Apple. Not all 3rd party adapters work the same.
Didn’t plug USB power into a 2A source.
Do not plug into the USB from the Alpine head unit. A third party USB adapter will need to be used that is 2A.
4
Android phone is not working with HDMI.
Using incorrect HDMI adapter.
If the phone has the feature to use an HDMI adapter it must be the one purchased from the manufacturer of the phone, not a third party adapter.
Miracast adapter isn’t plugged into a 2A source.
Do not plug into the USB from the Alpine head unit. A third party USB adapter will need to be used that is 2A.
Miracast adapter has resolution settings that are too high.
Plug the adapter into another monitor (for example a television in the home) and reduce the resolution settings.
Chevrolet/GMCFULL SIZE TRUCK � 20/20
Troubleshooting Guide Continued
Symptom Possible Cause Remedy
5iDatalink website says serial number is invalid.
Incorrect serial number is being used.
In the i209-GM settings confirm the serial number. MENU/SETUP/GENERAL/ABOUT.
Serial number may not be in iDatalink database.
Call ADS at 1-866-427-2999 and verify.
6
Headunit will not turn on.
Incorrect serial number was used when flashing maestro.
Flash Maestro with correct serial number.
4 pin Maestro data cable is disconnected or damaged.
Check for proper connection or disconnected pins.
OBD2 cable is not plugged in. Connect OBD2 connector to the OBD2 port.
Monitor, key-harness or main harness are not connected.
Check for proper connection or disconnected pins.
7 Cannot enter SETTINGS MENU.
Vehicle is in motion or parking brake is not engaged.
With vehicle in (P)PARK engage the parking brake. Release the parking brake and engage the parking brake a second time.
8
The Factory Onstar Voice Recognition system is too sensitive.
When you press the Onstar button on the mirror, noises in the vehicle may be recognized as voice commands. In addition radio key presses may also be recognized as voice commands while the Onstar is active.
Set the KEY BEEP TO “0” in radio settings menu.
9 On the climate screen, the power, recirculate, Rear Defroster, Front Defroster and AC buttons do nothing when pressed.
This is normal.These are only status icons. They are not buttons. They will turn yellow when selected.
10Cannot control the DVD Player properly.
DVD has not been set on the SETUP menu.
Ensure DVD is ON in HDMI SETUP menu.
HDMI box has not been set on the SETUP menu.
Ensure DVD is ON in HDMI SETUP menu and remote loop was cut on the wire harness.
11 Sound mutes when vehicle is shifted into reverse.
Mute on reverse is turned on in the SOUND menu.
Change Mute on reverse to off.
12 Only the front speakers are on for SXM Radio.
SXM Tuner has not been activated. Activate SXM Tuner.
13 The vehicle is incorrectly positioned on the Navigation display.
Poor GPS signal.Ensure the recommeded GPS antenna route was used. See page 11.
14CarPlay/ Android Auto map positioning issues.
GPS antenna is positioned incorrectly.
GPS antenna is obstructed and doesn’t have line of sight to the sky. Perform a factory reset. The unit will automatically recalibrate.
15
iPhone or Android phone is not recognizedwhen connected to theUSB cable.
Loose or disconnected USB cable.Check the USB connection behindthe headunit.
Non-compatible cable.
Use the cable supplied with theiPhone or Android phone. Third party adapters and long extensions may not work. Only use USB extension that came with the head unit.
Dirty charging port on phone. Clean charging port.