Embed Size (px)
Citation preview
1
Specifications
Benefits
Description
Features
www.dynisco.com
TTEEMMPPEERRAATTUURREE && MMEECCHHAANNIICCAALL CCHHAARRAACCTTEERRIISSTTIICCSSMMaaxx DDiiaapphhrraaggmm TTeemmppeerraattuurree:: 527oF (275oC)ZZeerroo SShhiifftt ((dduuee ttoo tteemmppeerraattuurree cchhaannggee)):: 36 psi/100oF Typical (65 psi/100oC)EElleeccttrroonniiccss OOppeerraattiinngg TTeemmppeerraattuurree::-20oF to 185oF (-25oC to 85oC)ZZeerroo SShhiifftt DDuuee ttoo TTeemmppeerraattuurree CChhaannggee::+/- 0.05% FS/oF max (+/- 0.10% FS/oC max) MMoouunnttiinngg TToorrqquuee:: 500 inch/lbs. maximumSSttaannddaarrdd WWeetttteedd PPaarrttss:: DyMax™ coated 15-5 PH SST
PPEERRFFOORRMMAANNCCEE CCHHAARRAACCTTEERRIISSTTIICCSSOOuuttppuutt:: 4 - 20 mAIInnppuutt VVoollttaaggee:: 14 - 36 VdcAAccccuurraaccyy:: +/- 0.5% FSO*RReeppeeaattaabbiilliittyy:: +/- 0.2%FSOCCoonnffiigguurraattiioonn:: Four-arm bonded foil Wheatstone bridgestrain gageLLooaadd RReessiissttaannccee:: 0 - 1,100 OhmsOOvveerr PPrreessssuurree:: 2 X FSOIInntteerrnnaall SShhuunntt CCaalliibbrraattiioonn ((RR--CCaall)):: 80% FSO +/- 0.5%IInnssuullaattiioonn RReessiissttaannccee:: 1000 megohms @ 50 Vdc
• No calibration required• Ideal for medical and food extrusion• Repeatable, reliable pressure measurements• Superior abrasion resistance• Direct input to supervisory control systems• Ready to use out of the box, just Auto-Zero
• Auto-Zero functionality• Oil fill meets FDA requirements• Accuracy better than +/- 0.5%• DyMaxTM coated convoluted SST wetted parts• 4 - 20 mA output• No span or zero pots
The PT4194 Series transmitter is a +/- 0.5% sensor ideal for food or medical applications requiring simpleinstallation, repeatability and reliability. The food grade oil fill material meets FDA requirements 21 CFR178.3620, 21 CFR 172.878 and 21 CFR 573.680. The PT4194 transmitters provide the industry standard 4 - 20 mAamplified signal designed to work with DCS and PLCs. The PT4194 comes equipped with the NEW Auto-Zerofunctionality. Auto-Zero provides the user the ability to install the transmitter right out of the box with justusing the zero push button after installation. Optional thermocouple or RTD configurations are available toprovide melt temperature. The PT4194 features a 1/2-20 UNF thread for simple and easy installation in stan-dard transducer mounting holes.
PT4194 Series
*The organic oil fill may be susceptible to gas generation at high temperatures for extended periods which may affectzero value (and therefore accuracy). Request the product manual for a full explanation and recommended procedureto eliminate any observed offset.
2
Ordering Guide
Shaded sections refer to standard configurations. Accuracy may be affected if non-standard configurations are used. For additionaloptions please consult factory.
Standard mating connector Dynisco P/N 711600 or 6-pin mating cable assembly.
OOppttiioonn
X PT4194-XX-X/XX-XXX-A
SStteemm LLeennggtthhblank = No Flex*18” = 18”, 46 cm Flex*Not available with temperature sensor
SSnnoouutt LLeennggtthh3” = 3”, 7.6 cm6” = 6”, 15 cm9” = 9”, 23 cm12” = 12.5”, 32 cm
PPrreessssuurree RRaannggee1M = 1,000 psi1.5M = 1,500 psi3M = 3,000 psi5M = 5,000 psi7.5M = 7,500 psi10M = 10,000 psi
TTeemmppeerraattuurree OOppttiioonnblank = No temperature sensorT = J Type thermocouple
指定代理商 北京合众吉泰科技有限公司
北京市西城区教场口街一号2号楼108室
电话：010-62057170，传真：010-62370886
Email: [email protected]
3
www.dynisco.com
All dimensions are inches (mm).
