CLUSTER - AIX - Installation de HACMP_eng

8/17/2019 CLUSTER - AIX - Installation de HACMP_eng

http://slidepdf.com/reader/full/cluster-aix-installation-de-hacmpeng 1/93

Project of Rationalization andConsolidation

SANOFI-AVENTIS

CLUSTER - AIX - Installation de HACMP_eng Technical paper 1193

Cluster PowerHA of SAP production

SANOFI-AVENTIS

Technical dossier of PowerHA 5.4 installation

____________________________________________________________________

Samir Attmani

E-mail: [email protected]



PowerHA 5.4 installation record



Modifi cati ons History

Version Written by Contents V1.0 S.ATTMANI Document Creation

V1.1 S.ATTMANI Document Modification V1.2 S.ATTMANI Modification after feedback V1.3 Mr. Lescot Upgraded for second cluster (SMART)

Vali dati ons Hi story

Version Examined by Approval

Remarks Approval by Date V1.1 Michael LESCOT

V1.3 Michael LESCOT

Maili ng li st

Recipient Organization/Jobfunction

Objective of the spreading

(val idation/inform ation )

Michael LESCOT Responsible sanofi-aventisAdministration Virtualization

validation

Pierjean Ponenti Ph. D IBM Project director information Patrice Calatrava IBM ITSpecialist information

Reference documents:

Document description






Contents

INTRODUCTION ............................................................................................................................. 4

DESCRIPTION OF THE PLATFORM ......................................................................................... 5

1 EQUIPMENT ........................................................................ERROR ! BOOKMARK NOT DEFINED. 2 ARCHITECTURE: .................................................................ERROR ! BOOKMARK NOT DEFINED.

3 VERSION OF THE PRODUCTS ...............................................ERROR ! BOOKMARK NOT DEFINED.

IMPLEMENTATION OF POWERHA .......................................................................................... 7

4 FILESETS PRE-REQUISITE FOR POWERHA ........................ERROR ! BOOKMARK NOT DEFINED. 4.1 RSCT................................................................................Er ror! Bookmark not defi ned. 4.2 The filesets prerequisite has the installation of POWERHA 5.4 were installed: ....Error!

Bookmark not defi ned. 5 I NSTALLATION OF THE FILESETS POWERHA 5.4...............ERROR ! BOOKMARK NOT DEFINED.

6 CHECKING OF THENECESSARY ONE ........................................................................................ 106.1 Pre-requisite TCPIP........................................................ Er ror! Bookmark not defi ned. 6.2 File netmon.cf ..................................................................Er ror! Bookmark not defi ned.

6.3 Checking of the parameters systems ............................... Er ror! Bookmark not defi ned. 6.4 Principles of organization of the VG, VL and FS for POWERHAEr ror! Bookmark not

defined. 6.5 Creation of the repertoire POWERHA............................Er ror! Bookmark not defi ned. 6.6 Topology .......................................................................... Er ror! Bookmark not defi ned.

6.7 Resources discs POWERHA............................................Er ror! Bookmark not defi ned. 6.8 Components of the groups of resource............................ Er ror! Bookmark not defi ned.

7 DEFINITION OF LOGICAL VOLUMES AND THE FILESYSTEMSERROR ! BOOKMARK NOT

DEFINED. 7.1 Volume Logical creation of log .......................................Er ror! Bookmark not defi ned.

7.2 Creation of logical volumes ............................................ Er ror! Bookmark not defi ned. 7.3 Creation of the filesystems ..............................................Er ror! Bookmark not defi ned.

7.4 Enlarging of the filesystem to the desired size ................Er ror! Bookmark not defi ned. 8 NOTIFICATION OF THE ERRORS ...........................................ERROR ! BOOKMARK NOT DEFINED.

8.1 Unattended setup of the notification of errors ................Er ror! Bookmark not defi ned.

8.2 Addition of a notification................................................. Er ror! Bookmark not defi ned. 8.3 List supervised errors: .................................................................................................. 36

9 TUNING OF THE CLUSTER ....................................................ERROR ! BOOKMARK NOT DEFINED. 10 POWERHA SPIN COLLECTION MANAGEMENT .............ERROR ! BOOKMARK NOT DEFINED.

10.1 Administration .................................................................Er ror! Bookmark not defi ned.

10.2 Creation of a new “File Collection”...............................Er ror! Bookmark not defi ned.

11 APPENDICES ....................................................................................................................... 4511.1 ANNEXURE : Launching and Shutdown of the cluster .............................................. 45 11.2 ANNEXURE : Logfiles of POWERHA ......................................................................... 46






11.3 ANNEXURE : Script.......................................................Er ror! Bookmark not defi ned.

11.4 ANNEXURE : Snap ...................................................................................................... 49








Description of the platform

1 Equipment

The cluster of POWERHA production consists of two P570 servers.

The berry of discs shared is of the DS8000 type.

2 Architecture:

gtyxvio1p02 gtyxvio2p02

SAN

rootvg

VGCL_PM6log VGCL_PM6redo

VGCL_PM6dat1 VGCL_PM6dat2

VGCL_PM6dat3

en0

virtual

N

P

I

V

rootvg

VGCL_PM6log VGCL_PM6redo

VGCL_PM6dat1 VGCL_PM6dat2

VGCL_PM6dat3

gtyxvio1p03 gtyxvio2p03

v s c s i

v s c s i

v s c s i

v s c s i

vlan16

gtyxsappm6p1 gtyxsappm6p2

en0

virtual

e

n

t0

e

n

t3

e

n

t2

e

n

t1

e

n

t0

e

n

t3

e

n

t2

e

n

t1

en

t

0

en

t

3

en

t

2

en

t

1

e

n

t0

e

n

t3

e

n

t2

e

n

t1

802.3ad 802.3ad 802.3ad 802.3ad

N

P

I

V

N

P

I

V

N

P

I

V

N

P

I

V

N

P

I

V

N

P

I

V

N

P

I

V

Figure1: Structure of PowerHA






3 Version of the products

AIX version: 6.1 - TL04 (6100-04-03-1009)

Version POWERHA: 5.4 (cluster.es.se 5.4.1.8 rver. rte)

Version SD DPCM:

2.5.1.0 devices. sddpcm.61. rte

devices.fcp.disk.ibm.mpio 1.0.0.20






Implementation of POWERHAThe implementation of the cluster POWERHA breaks up into 4 principal stages:

- Required pre Filesets,- Checking of the AIX prerequisites,

- Configuration of the cluster POWERHA- Installation of the notification of errors

4 Filesets pre-requisite for POWERHA

4.1 RSCT

NB: filesets minimum, versions to be upgraded according to AIX6.1 TL4 SP3 and PowerHA

5.4.1 SP8

Fileset Version Description

rsct.basic.hacmp 2.5.3.0 RSCT BASIC Function (HACMP/ES Support)

rsct. basic. rte 2.5.3.0 RSCT BASIC Function

rsct.basic.sp 2.5.3.0

rsct.compat.basic.hacmp 2.5.3.0 RSCT Vent Management BASIC Function (HACMP/ES Support)

rsct. compat. basic. rte 2.5.3.0 RSCT Vent Management BASIC Function

rsct.compat.basic.sp 2.5.3.0

rsct.compat.clients.hacmp 2.5.3.0 RSCT Vent Management User Function (HACMP/ES Support)

rsct. compat. clients. rte 2.5.3.0 RSCT Vent Management User Function

rsct.compat.clients.sp 2.5.3.0

rsct.core.auditrm 2.5.3.0 RSCT To that the Log Resource Manager rsct.core.errm 2.5.3.0 RSCT Vent Talkback Resource Manager

rsct.core.fsrm 2.5.3.0 RSCT Spins System Resource Manager

rsct.core.gui 2.5.3.0 RSCT Graphical To use Application interface

rsct.core.hostrm 2.5.3.0 RSCT Host Resource Manager

rsct.core.lprm 2.5.3.0 RSCT Least Privilege Resource Manager

rsct.core.rmc 2.5.3.0 RSCT Resource Monitoring and Control

rsct.core.sec 2.5.3.0 RSCT Security

rsct.core.sensorrm 2.5.3.0 RSCT Sensor Resource Manager

rsct.core.sr 2.5.3.0 RSCT Registry rsct.core.utils 2.5.3.0 RSCT Utilities








NB: filesets minimum, versions to be upgraded according to AIX6.1 TL4 SP3 and PowerHA

5.4.1 SP8

Product Version Description

cluster.doc.en_US.es.ht ml 5.4.1.0 HAES Web-based HTML

cluster.doc.en_US.es.pd F 5.4.1.0 HAES pdf Documentation - U.S.

cluster.es.cl ient. lib 5.4.1.4 ES User Libraries

cluster.es.cl ient. rte 5.4.1.5 ES User Runtime

cluster.es.cl ient.utils 5.4.1.5 ES User Utilities

cluster.es.cl ient. wsm 5.4.1.5 Web based Smit

cluster.es.cs poc.cmds 5.4.1.5 ES CSPOC Commands

cluster.es.cs poc. dsh 5.4.1.0 ES CSPOC dsh cluster.es.cs poc. rte 5.4.1.3 ES CSPOC Runtime Commands

cluster.es.pl ugins.dhcp 5.4.1.0 ES Plugins - dhcp

cluster.es.pl ugins. dns 5.4.1.0 ES Plugins - Name Server

cluster.es.pl ugins.printserver

cluster.es.se rver.cfgast 5.4.1.0 ES Two-node Configuration

cluster.es.se rver.diag 5.4.1.5 ES Server Diags

cluster.es.se rver.events 5.4.1.5 ES Server Vents

cluster.es.se rver. rte 5.4.1.5 ES Base Server Runtime

cluster.es.se rver.testtool 5.4.1.1 ES Cluster Tool Test

cluster.es.se rver.utils 5.4.1.5 ES Server Utilities cluster.es.wo rksheets 5.4.1.3 Online Worksheets Planning

cluster.license 5.4.1.1 HACMP Electronic License

csm.client 1.7.1.0 Cluster Systems Management

csm.core 1.7.1.0 Cluster Systems Management

csm.deploy 1.7.1.0 Cluster Systems Management

csm.diagnostics 1.7.1.0 Cluster Systems Management

csm. dsh 1.7.1.0 Cluster Systems Dsh Management

cluster.es.cl ient. lib 5.4.1.4 ES User Libraries

cluster.es.cl ient. rte 5.4.1.5 ES User Runtime

cluster.es.cs poc. rte 5.4.0.0 ES CSPOC Runtime Commands

cluster.es.se rver.diag 5.4.0.0 ES Server Diags

cluster.es.se rver.events 5.4.0.0 ES Server Vents

cluster.es.se rver. rte 5.4.1.5 ES Base Server Runtime

cluster.es.se rver.utils 5.4.1.5 ES Server Utilities

csm.client 1.7.1.0 Cluster Systems Management

csm.core 1.7.1.0 Cluster Systems Management

csm.deploy 1.7.1.0 Cluster Systems Management

csm.diagnostics 1.7.1.0 Cluster Systems Management

csm. dsh 1.7.1.0 Cluster Systems Dsh Management cluster.man.en_US.es.da your 5.4.1.3 ES Man Pages - U.S. English








To configure the two nodes with their address of bootup and to connect themselves in consol

If need be, to add manually the address persistente with the control chdev - L en0 - has alias4=' @IP', ' netmask'

and to withdraw it with the control chdev - L en0 - has delalias4=' @IP', ' netmask'

6.2 File netmon.cf

NB: Parameter setting called into question series incident cluster STOCK of the 2/18/2010. to

leave the empty file.

The /usr/es/sbin/cluster/netmon.cf file must be referred to make it possible to check the network

status.

! REQD 192.168.40.200

6.3 Checking of the parameters systems

- Checking of the parameter “fc_error_recov = fast_fail” on the cards Chanel fibre.

o Checking:for I in 0 1 2 3 4 5; C lsattr - El fscsi$i; give

o Modification if need be

for I in 0 1 2 3 4 5; C chdev - L fscsi$i - has fc_err_recov=fast_fail - P; give

- Values “No” were modified in the /etc/rc.net file. The following values were positioned:

/usr/sbin/no - Po ipforwarding=0 (option)/usr/sbin/no - Po subnetsarelocal=0

/usr/sbin/no - Po ipsendredirects=0/usr/sbin/no - Po routerevalidate=1

They can be installations via smit ---> Performance & Scheduling Resource - > Tuning Kernel& Network Parameters - >Tuning Network Parameters Options

Tuning Network Parameters Option

Move cursor to desired item and close Enter. . list Al Characteristics of Current Parameters Change/Show Current Parameters

Change/Show Parameters for Next Boot Save Current Parameters for Next Bootup Current Parameters reset to Defect Been worth






Reset Next Parameters Bootup to Defect Been worth

To change the current options and to back up them for the next bootup.

- The /sbin/rc.boot file was modified to pass the value “syncd” from 60 to 10:“Starting the sync daemon”

/usr/sbin/syncd nohup 10 >/dev/null 2>&1These values can also be modified by POWERHA with the menu:

# smit hacmp-> Extended Configuration->Extended Performance Tuning Parameters

Configuration - >

Change/Show syncd frequency

To change the values systems of I/O Pacing “High toilets mark for pending Write I/Os per spins”(upper limit by file for the queued ES writings) and “Low toilets mark for pending Write I/Os perslips by” (lower limit by file for the queued ES writings).

These values must be 33 for the high and 24 for the low. To position with

# smit - > Environments System - >Change/Show Characteristics of OS

These values can also be changed with:

# smit hacmp-> Extended Configuration->Extended Performance Tuning Parameters

Configuration - > Exchange/Show I/O Pacing

The language chosen for the cluster is the en_US language.

The id' S of the users and the groups, the passwords of the users, must be identical on all the nodesof the cluster. The /etc/passwd files and those of the /etc/security repertoire must be identical on the

2 nodes.






6.4 Organization principles of VG, VL and FS for POWERHA

The groups of volumes, logical volumes and filesystems must be known with the same definitionson each node. One will create volume groups on the first node:

The following general rules must be respected:

- to impose a major number on the group of volume (to determine the first availableone with lvlstmajor)

- if the mirroring is implemented by the LVM, to position the quorum with “No”,

- volume is positioned with auto--varyon with “No” for a VG Competitor, - to name logical volumes with their creation,

- to create the filesystems with logical volumes created previously and not to put themin automatic assembly at the initialization of the system,

- to rename the jfs2log of the filesystems,

Procedure:

Creation of the VG:mkvg - C - V [major number] - S 256 there [VG name] hdiskX

Creation of a jfs2log before the creation of the first jfs2Order logform to specify that this logical volume is a jfs2log

# /dev/log_XXX logformTo modify the jfs2log of each file system of the VG with the new name ofthe jfs2log

# chfs - has log=/dev/(lvlogname)/(fsname)

NB: the LV for the FS cluster will be created thereafter with C-SPOC

After having setting the VG “varyoff” on the first node, importation of the VG on the second node:

# importvg - V (major node) there (vgname) hdisk (X)

VG major volumes hdisk Label IP Mask






6.5 POWERHA directory creation

The following repertoires were created:

- /usr/HACMP_TOOLS/scripts- To add inside the skeletons of the Script start_appli and stop_appli

In the repertoire Script, the Script of start and stop of the applications will be installed

With the bootup of the nodes, the application interfaces are configure according to the following

table:

Node Interface Type IP address Label IP Mask

gtyxsappm6p1 en0 bootup 7.27.224.62 gtyxsappm6p1_boot 255.255.255.0

gtyxsappm6p1 en0 persistent 192.168.40.191 gtyxsappm6p1 255.255.255.0

gtyxsappm6p2 en0 bootup 7.27.224.63 gtyxsappm6p2_boot 255.255.255.0

gtyxsappm6p2 en0 persistent 192.168.40.192 gtyxsappm6p2 255.255.255.0

6.6 Topology

6.6.1 Cluster-name Defi ni tion

Here cluster-name is defined, alongwith nodes belonging to the cluster, especially bootup networksand adapters. Caution: service adapters are defined in resources only.

Admin addresses do not form part of the POWERHA cluster, in fact addresses can access a node

irrespective of the status of the cluster

The cluster is defined in the menu smitty hacmp-> extended configuration->extended topologyconfiguration->configure year HACMP cluster - >add/change/show year HACMP cluster

New cluster

Name cluster = PM6_CL SMART_DB_REC_CL

6.6.2 Addi ti on of the nodes

Then nodes are added with smitty hacmp - > extended configuration->extended topology->configure HACMP nodes








6.6.4 Creati on of si tes

Creation of sites is done via smitty hacmp-> extended configuration->extended topology

configuration->configure HACMP Sites → Add has Site

Characteristics of sites:

Name nodelist Predominance Protect_type

Data2 Gtyxorasmas01 Yes SGN

Data3 Gtyxorasmas02 No SGN

6.6.5 IP network Creation

The network being operational we chose the discovered IP-based Networks node types

Then POWERHA networks are created with smitty hacmp-> extended configuration->extended

topology configuration->configure HACMP Networks - >Add has Network to ClusterHACMP, to choose standard ether in discovered:






Then,

Note: The parameter network Name is “net_vlan16 ”

Check if netmask is okay. (the netmask must be identical for the application interfaces). We canalso modify the network name.

Network Name Network

Standard

Netmask Attribute Enable IP

Takeover via IP

Alias

Offset

net_vlan16 Ether 255.255.255.0 public Yes []






6.6.6 Bootup i nterface appl i cations Creation

Enter the command smitty hacmp-> extended configuration->extended topology configuration->configure HACMP Communication Application interfaces/Devices - >Add CommunicationApplication interfaces/Devices - >Add Communication discovered Interfaces and Devices - >

Communication Application interfaces - > net_vlan16

To select the application interfaces of bootup by “F7”:

Network: net_vlan16

Node Interface Type IP address Label IP Mask Name of the

networkPOWERHA

gtyxsappm6p1 en0 bootup 7.27.224.62 gtyxsappm6p1_boot 255.255.255.0 net_vlan16

gtyxsappm6p2 en0 bootup 7.27.224.63 gtyxsappm6p2_boot 255.255.255.0 net_vlan16






6.6.7 Creati on of persistent addresses

Enter the command smitty hacmp-> extended configuration->extended topology configuration-

>configure HACMP Persist in Node IP Label/Addresses - >Add has Persistent Node IP

Label/Address

Label IP IP address Mask Node Type

gtyxsappm6p1 192.168.40.191 255.255.255.0 gtyxsappm6p1 Persistent

gtyxsappm6p2 192.168.40.192 255.255.255.0 gtyxsappm6p2 Persistent

6.6.8 Non-IP networks creation

It is about a network of the “Heart-happy” type via disc.

To configure it, it is first of all necessary to create a volume AIX group of type competitor

enhanced.

The discs must be known on the two nodes with PVID consistent. To make known with

POWERHA the configuration of the discs, one will make a surgical procedure of “discover” of theresources:

# smitty hacmp - > Extend Configuration - > Discover HACMP-related Informationfrom Configured Nodes

Berry Nodes PVID Disc

Berry datacenter 1 gtyxsappm6p1 00c6e0d4c56889a70000000000000000 hdisk1

Berry datacenter 2 gtyxsappm6p1 00c6e0d4c5688caf0000000000000000 hdisk4

Berry datacenter 1 gtyxsappm6p2 00c6e0d4c56889a70000000000000000 hdisk1






Berry datacenter 2 gtyxsappm6p2 00c6e0d4c5688caf0000000000000000 hdisk4

Then to create a network of type heartbeat via disc with the menu:

# smitty hacmp->Extended Configuration Topology >Extended Configuration > Configures

HACMP Networks> To Add has Network to Cluster HACMP, to choose the type (Pre-definedSerial Type) diskhb and to allot a name to the network (a name is given by default, it can be

modified directly):

“Network Name” is net_disk hb_D2 for berry on the D2 datacenter and net_diskhb_D3 for berry ofthe D3 datacenter.

In order to allow the detection correct of the loss of the network of the diskhb type

#smitty hacmp - >Extended Configuration Topology >Extended Configuration > Configureyear HACMP Network Modulates > Change has Network Module Pre-defined Using Been

worth

To choose the network diskhb, then to modify “Failure Detection Misses “in “Fast”.

6.6.9 Addi ti on of the devices di skhb






To add the corresponding devices with menu smitty hacmp-> extended configuration->extended

topology configuration->configure HACMP Communication Application interfaces/Devices ->Add Communication Application interfaces/Devices - >Add Pre-Defined Communication

Interfaces and Devices - >Communication Devices

To select the networks previously created (net_diskhb_D2 and net_diskhb_D3) and to fill the fields

(device name is arbitrary, on the other hand the device path is the path corresponding to the physical volume allotted to volume AIX group of the competitor type)

Network Name NetworkStandard Device Path Name node Device name

net_diskhb_D2 diskhb /dev/hdisk1 gtyxsappm6p1 pm6p1_hb_D2




6.6.10 Heart-happy test of the di scs

To test the network heartbeat, to launch the control below:

Under /usr/sbin/rsct/bin

# ./dhb_read - p /dev/hdisk1 - R on gtyxsappm6p1 (receive mode)waiting for message talkback

# ./dhb_read - p /dev/hdisk1 - T on gtyxsappm6p2 (mode transmitted)

The message Link operating normally appears on the two machinesTo repeat the surgical procedure with the /dev/hdisk4 disc.

6.7 Resources discs POWERHA

6.7.1 Creation of the “shared Groups Volume”

Shared groups volumes must be created on the node gtyxsappm6p then imported on the nodegtyxsappm6p2.The discs must be known on the two nodes and the PVID must be consistent.






To make known with POWERHA the configuration of the discs, one will make a surgical procedure of “discover” of the resources:

# smitty hacmp - > Extend Configuration - > - > Discover HACMP-relatedInformation from Configured Nodes

6.7.2 Synchronisation

A synchronisation/checking with the values by default of the menu smit hacmp >ExtendedConfiguration >Extended Verification and Synchronization makes it possible to check the coherence

of the parameters seized in topology and to upgrade the parameters POWERHA in the ODM of theother nodes.

Attention, so that this surgical procedure can take place, it is necessary that a file/usr/es/sbin/cluster/etc/rhosts and /etc/hosts exist on all the nodes with information IP communes

with the nodes.






6.7.3 Al lowance of the discs on the si tes

Smit hacmp System Management (C-SPOC) HACMP Physical Volume Management

Configures Disk/Site Rentals for Crossite LVM Mirroring To Add Disk/Site Definition forCrossite LVM Mirroring

Berry 75DKBM1 Berry 2 75DKBN1

Hdisk22 75DKBM100DA hdisk5 75DKBN10077

Hdisk23 75DKBM100DB hdisk6 75DKBN10078

Hdisk24 75DKBM100DC hdisk7 75DKBN10079

Hdisk25 75DKBM100DD hdisk8 75DKBN1007A

Hdisk26 75DKBM100DE hdisk9 75DKBN100A6

Hdisk27 75DKBM100DF hdisk10 75DKBN100A7

Hdisk28 75DKBM100E0 hdisk47 75DKBN100BB

Hdisk29 75DKBM100E1 hdisk48 75DKBN100BC

Hdisk30 75DKBM100E2 hdisk11 75DKBN100C7

Hdisk31 75DKBM100E3 hdisk12 75DKBN100C8






Hdisk32 75DKBM101E4 hdisk43 75DKBN100F5

Hdisk33 75DKBM101E5 hdisk13 75DKBN10174





Hdisk38 75DKBM101EA hdisk18 75DKBN1017D

Hdisk39 75DKBM101EB hdisk19 75DKBN101A3

Hdisk40 75DKBM101EC hdisk20 75DKBN101A4

Hdisk41 75DKBM101ED hdisk21 75DKBN101A5

Hdisk42 75DKBM101EE hdisk44 75DKBN101F0 Hdisk45 75DKBM10219

Hdisk49 75DKBM1021C

Hdisk50 75DKBM1021D

Hdisk46 75DKBM1031F

Hdisk3 75DKBM1103F

Hdisk4 75DKBM11141

6.8 Components of the groups of resource

6.8.1 The address of servi ce

Booster: the addresses of service are activated with POWERHA and override the addresses of

bootup which are the addresses by default on the network card (addresses of bootup present exceptPOWERHA).One defines the addresses of service in the resources part via menu the smitty hacmp - >

Extended Configuration - >Extended Resource Configuration->HACMP Extended Resources

Configuration->Configure HACMP IP-based service Labels/Add adresses-> has IP-based

service label/Address






These addresses being they even defined in /etc/hosts

To choose Configurable one Multiple Nodes so that the address can toggle from one node toanother, validate and choose the name of the network; to enter the label of the address

IP-LABEL Type Network Servers IP Mask gtyxsappm6p service net_vlan16 gtyxsappm6p1/gtyxsappm6p2 192.168.40.190 255.255.255.0

6.8.2 The servers appl i cation






By server application one gathers startup scripts and of Shutdown of the applications having to

boot and quit themselves automatically with POWERHA. Enter the command smitty hacmp->Extended Configuration - >Extended Resource Configuration->HACMP Extended

Resources Configuration->Configure HACMP Servers Application - >Add year Server

Application

To re-enter server application name as well as the paths of startup script and discontinuation.

Server

application startup script Script of discontinuation AS_PM6 /usr/HACMP_TOOLS/scripts/start_appli /usr/HACMP_TOOLS/scripts/stop_appli

Startup scripts and Shutdown of the “Servers Applications” are under the /usr/HACMP_TOOLS/scripts/ repertoire.

Important: The Script of start and stop application in POWERHA 5.4 can be synchronized

automatically by POWERHA by new functionality “spins collection managment”






.

6.8.3 Appl i cation groups of resources

A group of resources POWERHA gathers all the elements which the cluster will have to protect

and thus toggle in the event of incident on the machine: a group of resources in general understandsan address of service which will have mounted with POWERHA, one or more groups volumes

which will be in varyon when POWERHA is booted, the associated filesystems which will havegone up with POWERHA, and finally the servers applications defined previously.

66..88..33..11 MMooddiif f iiccaattiioonn oof f tthhee ggrroouupp oof f rreessoouurrccee

It is first of all necessary to define a group of resources POWERHA with the following menu:

smitty hacmp->Extended Configuration - >Extended Resource Configuration->HACMP

Extended Resource Group Configuration-> To Add has Resource Group

To choose the mode of toggle, to validate, and inform the name of the group of resources and thenames of the nodes which will be able to take it again, the first node indicated will be the principal

node.

Resource Group Name RG_PM6 Inter-site Management Policy is unaware of Participating Node Name (S) gtyxsappm6p1 gtyxsappm6p2 Startup Policy Online One Only Home Node Fallover Policy Fallover To Next Priority Node In The Lists Fallback Policy Never Fallback






66..88..33..22 CChhaannggee oof f tthhee ggrroouupp oof f rreessoouurrccee

Then, to associate with this group of resources created all the resources which it will have to protectwith menu the Configuration smitty hacmp->Extended - >Extended Resource Configuration-

>HACMP Extended Resource Group Configuration-> Changes/Show Resources andAttributes for has Resource Group To include the address of service, the server application, groups volumes.

CAUTION: the filesystems created in all protected groups volumes will have automatically gone

up with POWERHA without it being necessary to include them in the group of resources.

Resource Group Name RG_PM6 Participating Node Name (S) gtyxsappm6p1 gtyxsappm6p2 Startup Policy Online One Only Home Node Fallover Policy Fallover To Next Priority Node In The Lists Fallback Policy Never Fallback Site Relationship is unaware of Node Priority IP-based service Label gtyxsappm6p Filesystems Al Filesystems Consistency Check fsck Filesystems Recovery Method sequential

Filesystems/Directories to Be exported (NFSv3) Filesystems/Directories to Be exported (NFSv4)

Filesystems to Be NFS mounted

Network For NFS Mount Stable Filesystem/Directory for NFSv4 Storage Groups VGCL_PM6log VGCL_PM6redo

VGCL_PM6dat1 VGCL_PM6dat2 VGCL_PM6dat3 volume Competitor Groups Volume Use forced varyon for groups volume, necessary yew true Disks

GMVG Replicated Resources

GMD Replicated Resources PPRC Replicated Resources

ERCMF Replicated Resources

SVC PPRC Replicated Resources

AIX Connections Services

AIX Fast Connect Services

Shared Types Resources Application Servers AS_PM6 Highly Available Communication Links

Primary Workload Manager Class

Secondary Workload Manager Class

Delayed Fallback Timer

Miscellaneous Dated Automatically Importation Groups false Volume






Takeover inactivates SA Disk Fencing false Filesystems mounted before IP configured false WPAR Name

Run Time Parameters:

Name gtyxsappm6p1 node To debug Level high Standard for hacmp. out format


6.8.4 Synchronisati on of the resources

Once the resources are defined it is necessary to carry out a new synchronisation of the cluster withsmit hacmp >Extended Configuration >Extended Verification and Synchronization and withcorrect the Automatically options errors found during checking in Yes .






Cor rect the Automatically parameter errors found during checking” can be put at yes in certain

circumstances, in particular to position the time stamp of the VGDA to a common value at the timeof the taking into account of a volume groups.






6.8.5 Modi fi cation SNMP for clstat

To edit /etc/snmpdv3.conf: to add the lineVACM_VIEW defaultView 1.3.6.1 .4.1.2.3.1.2.1.5 - included -

To quit/restart snmpdstopsrc - S snmpd

startsrc - S snmpd

To wait 2 minutes

6.8.6 Modi fi cation si te logs for hacmp. out

smitty hacmp > System Management (C-SPOC) >HACMP Log Viewing and Management >Exchange/Show has Cluster Log Directory

To choose hacmp. out

Change/Show has Cluster Log Directory

Select type but been worth in entry fields.Close Enter AFTER making Al desired exchanges.

[Entry fields]Cluster Log Name hacmp. out

Cluster Log Generated by Description vent sc>defect Log Destination Directory /var/hacmp/log

* Log Destination Directory [/tmp]

Allow Logs one Remote Filesystems false +

6.8.7 Boot of POWERHA

Boot of PowerHA on gtyxsappm6p and gtyxsappm6p2

#smitty clstart

Start Cluster Services

Select type but been worth in entry fields.

Close Enter AFTER making Al desired exchanges.

[Entry fields]






* Start now, one both system restart but now +

Start Cluster Services one thesis nodes [gtyxsappm6p] +* Manage Resource Groups Automatically +

BROADCAST message At startup? true +Startup Cluster Daemon Information? true +Is checking errors unaware of? false +

Correct Automatically found during Interactively errors +cluster start?

checking of running

# tail - F /tmp/hacmp.out

At the end of the surgical procedure

Checking which we passed well on the address of service

#ifconfig - has Checking which groups volumes are quite various one#lsvg - O

Checking that all the files systems went up

#df - K Checking of the resources

# /usr/es/sbin/cluster/utilities/clfindres

The cluster being booted, the menus C-SPOC can be used to define logical volumes and thefilesystems.






7 Definition of Logical Volumes and the Filesystems

The creation of the LV and FS will be made with menus CSPOC of POWERHA, the cluster being booted.

Procedure of implementation of logical Volumes and Filesystems:

o Creation of the Logical Volume of log (jfs2log)o Formatting of the jfs2log by the control “logform /dev/ <log name>” o Creation of Logical Volumeso Creation of the filing systemo Enlarging of the Filing system

7.1 Volume Logical creation of log

Logical volumes sharings can be created with the menus C-SPOC of POWERHA.

# smitty hacmp - > System Management (C-SPOC) - >HACMP Logical Management Volume- > Shared Logical Volume - >Add has Shared Logical Volume - > (Selection of the VG)

7.2 Creation of logical volumes

# smitty hacmp - > System Management (C-SPOC) - >HACMP Logical ManagementVolume - > Shared Logical Volume - >Add has Shared Logical Volume - > (Selection

of the VG then selection of the discs)

7.3 Creation of the filesystems

# smitty hacmp - > System Management (C-SPOC) - >HACMP Logical Management

Volume - > Shared Spins Systems - > Enhanced Journaled File Systems - >Add yearEnhanced Journaled File System one has Previously Defined Logical Volume - >(Selection of the LV)

Lists filesystems managed by PowerHA

/dev/pm6lvscan -- /invscan jfs2 -- rw No No /dev/pm6lvint -- /inter jfs2 -- rw No No






/dev/pm6lvdveb -- /usr/sap/PM6/DVEBMGS00/work/tri jfs2 -- rw No

No /dev/pm6lvmirA -- /oracle/PM6/mirrlogA jfs2 -- cio, rw No No /dev/pm6lvmirB -- /oracle/PM6/mirrlogB jfs2 -- cio, rw No No /dev/pm6lvoriB -- /oracle/PM6/origlogB jfs2 -- cio, rw No No /dev/pm6lvoriA -- /oracle/PM6/origlogA jfs2 -- cio, rw No No /dev/pm6lvorastg -- /oracle/stage jfs2 -- rw No No /dev/pm6lvdata1 -- /oracle/PM6/sapdata1 jfs2 -- cio, rw No No /dev/pm6lvdata2 -- /oracle/PM6/sapdata2 jfs2 -- cio, rw No No /dev/pm6lvdata3 -- /oracle/PM6/sapdata3 jfs2 -- cio, rw No No /dev/pm6lvdata4 -- /oracle/PM6/sapdata4 jfs2 -- cio, rw No No /dev/pm6lvdata5 -- /oracle/PM6/sapdata5 jfs2 -- cio, rw No No /dev/pm6lvdata6 -- /oracle/PM6/sapdata6 jfs2 -- cio, rw No No /dev/PM6_lvora -- /oracle jfs2 -- cio, rw No No

/dev/lvorapm6 -- /oracle/PM6 jfs2 -- rw No No /dev/pm6lvsapreog -- /oracle/PM6/sapreorg jfs2 -- rw No No /dev/pm6lvmnt -- /sapmnt/PM6 jfs2 -- rw No No /dev/pm6lvmntpool -- /sapmnt/PM6/global/600SPOOL jfs2 -- rw No No /dev/pm6lvusrsap -- /usr/sap jfs2 -- rw No No /dev/pm6lvusap -- /usr/sap/PM6 jfs2 -- rw No No /dev/pm6lvstrans -- /usr/sap/trans jfs2 -- rw No No /dev/pm6lvadm -- /home/pm6adm jfs2 -- rw No No /dev/pm6lvarching -- /usr/sap/archiving jfs2 -- rw No No /dev/pm6lvcft -- /FS01/logiciel/cft jfs2 -- rw No No /dev/pm6lvdazl -- /FS01/logiciel/hpos jfs2 -- rw No No /dev/pm6lvorarch -- /oracle/PM6/oraarch jfs2 -- rw No No

7.4 Enlarging of the filesystem to the desired size

# smitty hacmp - > System Management (C-SPOC) - >HACMP Logical ManagementVolume - > Shared Spins Systems - > Enhanced Journaled File Systems -

>Change/Show Characteristics of has Shared Enhanced Journaled File System (Selection of the filesystem)

8 Notification of the errorsThe notification of errors makes it possible to detect any material element of the cluster likely tohave consequences on the behavior of the cluster.

Here it relates to the internal discs, the discs and the cards fibres. Any detection of problem willlead to a toggle or an error message in the log POWERHA.

Details are logués in hacmp. out and clstrmgr.debug, container:

- label of AIX error and its ID- name of the group of resources concerned

- name of the node on which the error took place






A toggle is also started when there is a loss of group volume shared on one of the nodes (loss of

quorum, error LVM_SA_QUORCLOSE). POWERHA uses the notification of errors to supervisethe possible losses of quorum on groups volume. If the AIX daemon detects a loss of quorum

(Error Label LVM_SA_QUORCLOSE), the cluster manager is upgraded. It then starts a “move” ofthe resource containing group volume concerned towards the node of backup.

This last error (LVM_SA_QUORCLOSE) does not intervene systematically also we added adetection of error LVM_IO_FAIL. If this error is detected, one will check on this node which the

disc heartbeat is quite accessible. If the disc heartbeat is not accessible, one of deducted that all the paths Chanel fibre are cut, one starts a tilting by halt then - Q.

On the node of backup, the group of resources will be active again: the loss of quorum will be

bypassed by the group of resources and group volume could be in varyon. The daemon of eventmanagement will react only to the next loss of quorum.

ATTENTION it is necessary to modify the elements concerning each node on the node itself (the

synchronisation does not go for the notifications of errors.) Moreover, the notifications of error

are configured only when POWERHA is quitted on all the servers.






8.1 Unattended setup of the notification of errors

The configuration is done with the menu:# smit hacmp - >Problem Tools Determination - >HACMP Error Notification - > Automatic

Error Notification Configures - >Add Error Notify Methods for Cluster Resources

To check the errors detected with:

# smit hacmp - >Problem Tools Determination - >HACMP Error Notification - > Automatic

Error Notification Configures - >List Error Notify Methods for Cluster Resources

8.2 Addition of a notification

8.2.1 Addition for LVM_IO_FAIL

We added a detection of error LVM_IO_FAIL. If this error is detected, one will check on this nodewhich the discs heartbeat are quite accessible. If the two discs heartbeat are not accessible, one of

deducted that all the paths Chanel fibre are cut, one starts a tilting by halt then - Q.

The halt - Q is launched by the Script: /usr/HACMP_tools/scripts/fcs_failover

8.2.2 Parameters

Notification Object Name lvm_io_failPersists across system restart? Yes

Process ID for uses by Notify Method [0] Select Error Class HARDWARE Select Standard Error LEAVE

Match Alertable errors? Nun Select Error Label [LVM_IO_FAIL]

Resource Name [LVDD] Resource Class [Al] Standard resource [Al]

Notify Method [/usr/HACMP_tools/scripts/fcs_failover $6 $9]

The Script fcs_failover checks the discs heartbeat by executable Hdalivepvid. The “return codes”this executable one to 99 indicates known the discs heartbeat are not accessible.

8.3 List supervised errors:






the first column corresponds to the type of error generated by “errorlog” of AIX, the second

column is the name of the notification for the cluster manager.

With each notification there will be an action taken by POWERHA which will be forexample:/usr/es/sbin/cluster/diag/c l_logerror (Only one message in the logs)

gtyxsappm6p1: gtyxsappm6p1: HACMP Resource Notify Method Error gtyxsappm6p1: gtyxsappm6p1: /usr/es/sbin/cluster/diag/cl_failover hdisk0 gtyxsappm6p1: /usr/es/sbin/cluster/diag/cl_logerror hdisk3

gtyxsappm6p1: /usr/es/sbin/cluster/diag/cl_logerror hdisk2 gtyxsappm6p1: /usr/es/sbin/cluster/diag/cl_logerror hdisk14 gtyxsappm6p1: hdisk33 /usr/es/sbin/cluster/diag/cl_logerror gtyxsappm6p1: hdisk23 /usr/es/sbin/cluster/diag/cl_logerror gtyxsappm6p1: /usr/es/sbin/cluster/diag/cl_logerror hdisk13 gtyxsappm6p1: /usr/es/sbin/cluster/diag/cl_logerror hdisk5 gtyxsappm6p1: hdisk32 /usr/es/sbin/cluster/diag/cl_logerror gtyxsappm6p1: /usr/es/sbin/cluster/diag/cl_logerror hdisk6 gtyxsappm6p1: hdisk24 /usr/es/sbin/cluster/diag/cl_logerror gtyxsappm6p1: /usr/es/sbin/cluster/diag/cl_logerror hdisk8 gtyxsappm6p1: hdisk36 /usr/es/sbin/cluster/diag/cl_logerror gtyxsappm6p1: hdisk25 /usr/es/sbin/cluster/diag/cl_logerror gtyxsappm6p1: /usr/es/sbin/cluster/diag/cl_logerror hdisk16 gtyxsappm6p1: /usr/es/sbin/cluster/diag/cl_logerror hdisk17 gtyxsappm6p1: hdisk26 /usr/es/sbin/cluster/diag/cl_logerror gtyxsappm6p1: hdisk34 /usr/es/sbin/cluster/diag/cl_logerror gtyxsappm6p1: /usr/es/sbin/cluster/diag/cl_logerror hdisk7 gtyxsappm6p1: /usr/es/sbin/cluster/diag/cl_logerror hdisk15 gtyxsappm6p1: hdisk35 /usr/es/sbin/cluster/diag/cl_logerror gtyxsappm6p1: hdisk37 /usr/es/sbin/cluster/diag/cl_logerror gtyxsappm6p1: /usr/es/sbin/cluster/diag/cl_logerror hdisk9 gtyxsappm6p1: hdisk27 /usr/es/sbin/cluster/diag/cl_logerror gtyxsappm6p1: /usr/es/sbin/cluster/diag/cl_logerror hdisk19 gtyxsappm6p1: /usr/es/sbin/cluster/diag/cl_logerror hdisk18 gtyxsappm6p1: hdisk28 /usr/es/sbin/cluster/diag/cl_logerror gtyxsappm6p1: hdisk29 /usr/es/sbin/cluster/diag/cl_logerror gtyxsappm6p1: hdisk38 /usr/es/sbin/cluster/diag/cl_logerror gtyxsappm6p1: /usr/es/sbin/cluster/diag/cl_logerror hdisk11 gtyxsappm6p1: /usr/es/sbin/cluster/diag/cl_logerror hdisk10 gtyxsappm6p1: /usr/es/sbin/cluster/diag/cl_logerror hdisk21 gtyxsappm6p1: hdisk40 /usr/es/sbin/cluster/diag/cl_logerror gtyxsappm6p1: /usr/es/sbin/cluster/diag/cl_logerror hdisk20 gtyxsappm6p1: hdisk30 /usr/es/sbin/cluster/diag/cl_logerror gtyxsappm6p1: hdisk39 /usr/es/sbin/cluster/diag/cl_logerror gtyxsappm6p1: /usr/es/sbin/cluster/diag/cl_logerror hdisk12 gtyxsappm6p1: /usr/es/sbin/cluster/diag/cl_logerror fcs2 gtyxsappm6p1: /usr/es/sbin/cluster/diag/cl_logerror fcs0 gtyxsappm6p2: gtyxsappm6p2: HACMP Resource Notify Method Error gtyxsappm6p2: gtyxsappm6p2: /usr/es/sbin/cluster/diag/cl_failover hdisk0 gtyxsappm6p2: /usr/es/sbin/cluster/diag/cl_logerror hdisk3 gtyxsappm6p2: /usr/es/sbin/cluster/diag/cl_logerror hdisk2






gtyxsappm6p2: /usr/es/sbin/cluster/diag/cl_logerror hdisk15 gtyxsappm6p2: hdisk32 /usr/es/sbin/cluster/diag/cl_logerror gtyxsappm6p2: hdisk23 /usr/es/sbin/cluster/diag/cl_logerror gtyxsappm6p2: /usr/es/sbin/cluster/diag/cl_logerror hdisk14 gtyxsappm6p2: /usr/es/sbin/cluster/diag/cl_logerror hdisk6 gtyxsappm6p2: hdisk31 /usr/es/sbin/cluster/diag/cl_logerror gtyxsappm6p2: /usr/es/sbin/cluster/diag/cl_logerror hdisk7 gtyxsappm6p2: hdisk24 /usr/es/sbin/cluster/diag/cl_logerror gtyxsappm6p2: /usr/es/sbin/cluster/diag/cl_logerror hdisk9 gtyxsappm6p2: hdisk35 /usr/es/sbin/cluster/diag/cl_logerror gtyxsappm6p2: hdisk25 /usr/es/sbin/cluster/diag/cl_logerror gtyxsappm6p2: /usr/es/sbin/cluster/diag/cl_logerror hdisk17 gtyxsappm6p2: /usr/es/sbin/cluster/diag/cl_logerror hdisk18 gtyxsappm6p2: hdisk26 /usr/es/sbin/cluster/diag/cl_logerror

gtyxsappm6p2: hdisk33 /usr/es/sbin/cluster/diag/cl_logerror gtyxsappm6p2: /usr/es/sbin/cluster/diag/cl_logerror hdisk8 gtyxsappm6p2: /usr/es/sbin/cluster/diag/cl_logerror hdisk16 gtyxsappm6p2: hdisk34 /usr/es/sbin/cluster/diag/cl_logerror gtyxsappm6p2: hdisk36 /usr/es/sbin/cluster/diag/cl_logerror gtyxsappm6p2: /usr/es/sbin/cluster/diag/cl_logerror hdisk10 gtyxsappm6p2: hdisk27 /usr/es/sbin/cluster/diag/cl_logerror gtyxsappm6p2: /usr/es/sbin/cluster/diag/cl_logerror hdisk20 gtyxsappm6p2: /usr/es/sbin/cluster/diag/cl_logerror hdisk19 gtyxsappm6p2: hdisk28 /usr/es/sbin/cluster/diag/cl_logerror gtyxsappm6p2: hdisk29 /usr/es/sbin/cluster/diag/cl_logerror gtyxsappm6p2: hdisk37 /usr/es/sbin/cluster/diag/cl_logerror gtyxsappm6p2: /usr/es/sbin/cluster/diag/cl_logerror hdisk12

gtyxsappm6p2: /usr/es/sbin/cluster/diag/cl_logerror hdisk11 gtyxsappm6p2: hdisk22 /usr/es/sbin/cluster/diag/cl_logerror gtyxsappm6p2: hdisk39 /usr/es/sbin/cluster/diag/cl_logerror gtyxsappm6p2: /usr/es/sbin/cluster/diag/cl_logerror hdisk21 gtyxsappm6p2: hdisk30 /usr/es/sbin/cluster/diag/cl_logerror gtyxsappm6p2: hdisk38 /usr/es/sbin/cluster/diag/cl_logerror gtyxsappm6p2: /usr/es/sbin/cluster/diag/cl_logerror hdisk13 gtyxsappm6p2: /usr/es/sbin/cluster/diag/cl_logerror fcs0

NOTE: List produced by the control “/usr/es/sbin/cluster/utilities/err_object_l ist”






9 Tuning of the cluster

POWERHA fixes a 300 seconds deadlines at each event to finish.

Usual case:A node joining the cluster, launches the event “node_up” for one 300 seconds duration.

The node of help quits the applications and release the resources.The principal node takes again its resources and generates the event “node_up_complete”

which puts an end to the 300 second old timer.

However, in a case of graceful Shutdown with request for takeover, it may be that the time

cumulated for the surgical procedures of Shutdown of the applications, release andresumption of the resources, exceeds the 300 seconds.In such a case, when the lead time of 300s is past, POWERHA generates the event

“configuration too long” every 30 seconds, until the condition is raised. One can read this event in the /usr/HACMP_tools/logs/hacmp.out file (path by default) or in

the tree structure chosen by the user.This mechanism authorizes the call of a Script user intended to analyze the situation and to

take the adequate measures.

The modificat ion is done by the menu:

# smit hacmp-> Extended Configuration->Extended Vent Configuration->Change/Show

Time Until Warning






The time allowed for the “fast” vents before the appearance of the event config_too_long ismodified by the field Event Duration entry. The time allowed for the “slow fox trot” vents

before a message of alarm is the sum of the fields Event Duration and Resource GroupDuration. The values by default of Vent Duration and Group Processing Time Resource areof 180 each one. One positions the values with 200 and 400.

10 POWERHA Spin Collection Management

Like volumes, certain files located on each servers of the cluster need to be identical for the good performance of the cluster, like the Script of start and Shutdown of the applications for example

With the new functionality “POWERHA Spins Collection” a list of files is automatically

maintained with identical by synchronisation.

By default, There exist two lists of files collection.

10.1 Administration

We can manage these lists via C_SPOC

# smitty hacmp - > System Management C-SPOC - >HACMP Spins CollectionManagement






By default the synchronisation is done all the 10mn, if the “propagate files automatically” is putat “yes”

# smitty hacmp - > System Management C-SPOC - >HACMP Spins Collection

Management - > Manage File Collection - > Change/Show Automatic Update Time






10.2 Creation of a new “File Collection”

To propagate the files useful for the administration of the cluster, there is the EEC a new“File called Collection”: hacmp_scripts_files

# smitty hacmp - > System Management C-SPOC - >HACMP Spins CollectionManagement - > Manage File Collection - >Add has File Collections

Spin Collection Name Spin Collection Description

Scripts_HACMP Script HACMP






10.2.1 Addition of a file in this “File Collection”

# smitty hacmp - > System Management C-SPOC - >HACMP Spins Collections

Management - > Manage Fle in File Collections - Files >Add to has File Collections (To

choose the File Collections)

Addition of the files Script being under the /usr/HACMP_tools/scripts repertoire






10.2.2 To propagate the fi l e created on the Fi les Collections:

For the propagation it is necessary to pass by

# smitty hacmp - > System Management C-SPOC - >HACMP Spins Collections Management- > Propagate Files in File Collections (To select the Files Collections)






11 Annexure

11.1 ANNEXURE : Launching and Shutdown of the cluster

11.1.1 Launching of POWERHA

Syntax of the ordering of launching: smit clstart

11.1.2 Shutdown of POWERHA

Syntax of the ordering of launching: smit clstop

The Shutdown of POWERHA can be done in three ways:

- Bring Resource Groups Offline POWERHA is quitted properly. The applications arequitted, the resources are released. The node of help does not take again the resources.

- Move Resource Groups POWERHA is quitted properly. The applications are quitted, theresources are released, then the node of help takes again the resources and starts again the

applications of the node has just quitted itself.- Unmanage Resource Groups Seuls the procedures POWERHA are quitted. The

applications continue. The resources are not released.






11.2 ANNEXURE : Logfiles of POWERHA

There exist a certain number of logfiles.

- /var/hacmp/adm/cluster. log supplied the traces relative to the principal events POWERHA and toerrors which have occurred on the cluster.

- /tmp/hacmp.out it is the file more used by the administrator. He reports in an exhaustive way the

events and most AIX controls executed by the Script.

11.3 ANNEXURE : Script

11.3.1 fcs_failover

gtyxsappm6p2_HACMP_: /usr/HACMP_TOOLS/scripts-- cat fcs_failover#! /bin/ksh# IBM_PROLOG_BEGIN_TAG# This is year automatically generated prolog.#### Licensed Materials - Property of IBM## Restricted Materials of IBM## (C) COPYRIGHT International Business Machines Corp. 1999.2003# Al Rights Reserved## US Government Users Restricted Rights - Uses, duplication gold# disclosure restricted by GSA ADP Schedule Contract with IBM Body.#

# IBM_PROLOG_END_TAG# @ (#) 08 1.8 src/43haes/usr/sbin/cluster/diag/cl_errnotify/cl_failover.sh,hacmp.diags, 51haes_r520, r5200422a 9/10/03 16:10: 12# $Id$

################################################################################# Name: fcs_failover## Description:## Syntax:## fcs_failover [device_name] [error_label]#

# device_name: name of HACMP device (gold rootvg|SP Switch to adapt)# which has received the error## error_label: the error to identify for the permanent hardware error






#

# Called from:# errdemon## Cal to:# cl_log# clstop# clexit## Returns:################################################################################set - X

[“$VERBOSE_LOGGING” = “high”] && set - X

## Read the device name and the error label#DEVICE_NAME=$1ERROR_LABEL=$2

PATH= " $ (/usr/es/sbin/cluster/utilities/cl_get_path Al)” export PATH

PROGNAME=$ (basename $ {0})HA_DIR= " $ (cl_get_path)”

MSG= " HACMP errnotify vent ERROR: $ERROR_LABEL has occurred one device: $DEVICE_NAME. \N”

## Check yew to use changed the rental of the file from the defect# /tmp directory#HA_LOG_DIR=” /tmp”

dir_in_odm= ` odmget - Q " name=hacmp. out” HACMPlogs | grep been worth | awk “{print$3} “ | sed “S” //g” `

yew [[“X$dir_in_odm”! = “X/tmp”]] then

HA_LOG_DIR=$dir_in_odmfi

## Log the message to stdout ace well ace hacmp. out#cl_log 6000 “$MSG” $ERROR_LABEL $DEVICE_NAME cl_echo 6000 “$MSG” $ERROR_LABEL $DEVICE_NAME 2>> $HA_LOG_DIR/hacmp.out

## E-mail root#DATE= ` /usr/bin/date `/usr/es/sbin/cluster/utilities/cllsif | grep diskhb | awk “{print $NF”} | - Ru leaves|xargs |while read DISK1 DISK2CDISKHB1= ` echo $DISK1 | cut - f3 - D `

DISKHB2= ` echo $DISK2 | cut - f3 - D `give






echo $DATE > /tmp/notify. $$echo $MSG >> /tmp/notify. $$e-mail root < /tmp/notify. $$/bin/rm - RF /tmp/notify. $$

# Yew you wish to add additional functionality to this Script# Please places it between the “####” lines

#### Start of using codefunction stopAppli_haltMachine{banner “TAKEOVER” “FORCED " >/dev/console print “###################################” >> $ {HA_LOG_DIR} /hacmp.out print “Shell Takeover Forced by: fcs_failover” >> $ {HA_LOG_DIR} /hacmp.out sleep 2#/usr/sbin/sync/usr/sbin/halt - Q}

################################################print “breakdown detectee by LVM_IO_FAIL “>> $ {HA_LOG_DIR} /hacmp.out print “Test Disc Heart bit of the network diskhb_01” >> $ {HA_LOG_DIR} /hacmp.out STAT_HB1=$ (/USR/HACMP_TOOLS/SCRIPTS/HDALIVEPVID R$ {DISKHB1} >> /dev/null; echo $?)STAT_HB2=$ (/USR/HACMP_TOOLS/SCRIPTS/HDALIVEPVID R$ {DISKHB2} >> /dev/null; echo $?)

yew [[$ {STAT_HB1} - 0]] && [[$ {STAT_HB2} - 0]]thenstopAppli_haltMachine

fi

#### End of using code

exit 0






11.4 ANNEXURE : Snap

<VER

</VER

<DSC 20091125 -- </DSC

================================================================================ COMMAND: cllscf ================================================================================ Name cluster: PM6_CL Cluster Connection Authentication Mode: Standard Cluster Message Authentication Mode: Nun Cluster Message Encryption: Nun Use Persistent Labels for Communication: No There were 3 networks defined: net_diskhb_D2, net_diskhb_D3, net_vlan16 There are 2 nodes in this cluster

NODE gtyxsappm6p1:

This node has 3 IP-based service label (S):

IP-based service Label pm6p1_hb_D2:

IP address: /dev/hdisk1

Address hardware:

Network: net_diskhb_D2

Attribute: serial

Aliased Address?: Sayable

IP-based service Label pm6p1_hb_D2 has No communication application

interfaces.

IP-based service Label pm6p1_hb_D2 has No communication applicationinterfaces for recovery.



Address hardware:


Attribute: serial


IP-based service Label pm6p1_hb_D3 has No communication applicationinterfaces.







interfaces for recovery.

IP-based service Label gtyxsappm6p:

IP address: 192.168.40.190

Address hardware:

Network: net_vlan16

Attribute: public

Aliased Address?: Enable

IP-based service Label gtyxsappm6p has 1 communication applicationinterfaces. (Alternate Service) Communication Interfaces 1: gtyxsappm6p1_boot

IP address: 7.27.224.62

Network: net_vlan16

Attribute: public

Alias address for heartbeat:

IP-based service Label gtyxsappm6p has No communication application


NODE gtyxsappm6p2: This node has 3 IP-based service label (S):



Address hardware: Network: net_diskhb_D2

Attribute: serial


IP-based service Label pm6p2_hb_D2 has No communication applicationinterfaces.




IP address: /dev/hdisk4 Address hardware:


Attribute: serial








interfaces. IP-based service Label pm6p2_hb_D3 has No communication application


IP-based service Label gtyxsappm6p:

IP address: 192.168.40.190

Address hardware:

Network: net_vlan16

Attribute: public

Aliased Address?: Enable

IP-based service Label gtyxsappm6p has 1 communication application

interfaces. (Alternate Service) Communication Interfaces 1: gtyxsappm6p2_boot

IP address: 7.27.224.63

Network: net_vlan16

Attribute: public

Alias address for heartbeat:

IP-based service Label gtyxsappm6p has No communication application


Breakdown of network connections:

Connections to network net_diskhb_D2 Node gtyxsappm6p1 is connected to network net_diskhb_D2 by thesis application

interfaces:

pm6p1_hb_D2

Node gtyxsappm6p2 is connected to network net_diskhb_D2 by thesis application

interfaces: pm6p2_hb_D2

Connections to network net_diskhb_D3 Node gtyxsappm6p1 is connected to network net_diskhb_D3 by thesis application


Node gtyxsappm6p2 is connected to network net_diskhb_D3 by thesis application


Connections to network net_vlan16






Node gtyxsappm6p1 is connected to network net_vlan16 by thesis application

interfaces: gtyxsappm6p1_boot

gtyxsappm6p

Node gtyxsappm6p2 is connected to network net_vlan16 by thesis application

interfaces: gtyxsappm6p2_boot

gtyxsappm6p

COMMAND cllscf returned 0

================================================================================ COMMAND: cllsnw ================================================================================ Network Attribute Alias Monitor method Node To adapt (S)

sayable net_diskhb_D2 serial Defect monitoring gtyxsappm6p1 pm6p1_hb_D2 gtyxsappm6p2 pm6p2_hb_D2

sayable net_diskhb_D3 serial Defect monitoring gtyxsappm6p1 pm6p1_hb_D3 gtyxsappm6p2 pm6p2_hb_D3

net_vlan16 public Enable Defect monitoring gtyxsappm6p1 gtyxsappm6p1_boot

gtyxsappm6p gtyxsappm6p2 gtyxsappm6p2_boot gtyxsappm6p

COMMAND cllsnw returned 0

================================================================================ COMMAND: cllsif ================================================================================ Adapter Type Network Net Standard Attribute Node IP address Address HardwareInterfaces Name Global Name Netmask Alias for HB

pm6p1_hb_D2 service net_diskhb_D2 diskhb serial gtyxsappm6p1 /dev/hdisk1

hdisk1 pm6p1_hb_D3 service net_diskhb_D3 diskhb serial gtyxsappm6p1 /dev/hdisk4

hdisk4 gtyxsappm6p1_boot bootup net_vlan16 public ether gtyxsappm6p1 7.27.224.62 en0255.255.255.0 gtyxsappm6p service net_vlan16 public ether gtyxsappm6p1 192.168.40.190

255.255.255.0 pm6p2_hb_D2 service net_diskhb_D2 diskhb serial gtyxsappm6p2 /dev/hdisk1

hdisk1 pm6p2_hb_D3 service net_diskhb_D3 diskhb serial gtyxsappm6p2 /dev/hdisk4

hdisk4 gtyxsappm6p2_boot bootup net_vlan16 public ether gtyxsappm6p2 7.27.224.63 en0

255.255.255.0 gtyxsappm6p service net_vlan16 public ether gtyxsappm6p2 192.168.40.190255.255.255.0










COMMAND clshowres returned 0

clsnapshot: Following information is retrieved from node: gtyxsappm6p1 -------------------------------------------------

================================================================================ COMMAND: netstat - I ================================================================================ Name MTU Network Address ZoneID Ipkts Ierrs Opkts Oerrs coll en0 1500 link-2 3e.fd.13.4d.3.14 - 441361590 0 228585740 0 0 en0 1500 7.27.224 gtyxsappm6p1_boots - 441361590 0 228585740 0 0 en0 1500 192.168.40 gtyxsappm6p1. pharma. avs - 441361590 0 228585740 0 0 en0 1500 192.168.40 gtyxsappm6p. pharma. aves - 441361590 0 228585740 0 0 lo0 16896 link-1 - 1490005622 0 1488897666 0 0 lo0 16896 127 loopback - 1490005622 0 1488897666 0 0 lo0 16896:: 1 1 1490005622 0 1488897666 0 0

================================================================================ COMMAND: netstat - in ================================================================================ Name MTU Network Address ZoneID Ipkts Ierrs Opkts Oerrs coll en0 1500 link-2 3e.fd.13.4d.3.14 - 441361590 0 228585745 0 0 en0 1500 7.27.224 7.27.224.62 - 441361590 0 228585745 0 0 en0 1500 192.168.40 192.168.40.191 - 441361590 0 228585745 0 0 en0 1500 192.168.40 192.168.40.190 - 441361590 0 228585745 0 0 lo0 16896 link-1 - 1490005624 0 1488897668 0 0 lo0 16896 127 127.0.0.1 - 1490005624 0 1488897668 0 0 lo0 16896:: 1 1 1490005624 0 1488897668 0 0

================================================================================ COMMAND: No - has ================================================================================

arpqsize = 12

arpt_killc = 20

arptab_bsiz = 7 arptab_nb = 149

bcastping = 0

clean_partial_conns = 0

delayack = 0

delayackports = {}

dgd_packets_lost = 3

dgd_ping_time = 5

dgd_retry_time = 5






directed_broadcast = 0

fasttimo = 200

icmp6_errmsg_rate = 10

icmpaddressmask = 0 ie5_old_multicast_mapping = 0

ifsize = 256

ip6_defttl = 64

ip6_prune = 1

ip6forwarding = 0

ip6srcrouteforward = 1

ip_ifdelete_notify = 0

ip_nfrag = 200 ipforwarding=0

ipfragttl = 2

ipignoreredirects = 0

ipqmaxlen = 100

ipsendredirects=0 ipsrcrouteforward=1

ipsrcrouterecv = 1

ipsrcroutesend=1

llsleep_timeout = 3

lo_perf = 1

lowthresh = 90 main_if6 = 0

main_site6 = 0

maxnip6q = 20

maxttl = 255

medthresh = 95

mpr_policy = 1

multi_homed = 1

nbc_limit = 15073280

nbc_max_cache = 131072

nbc_min_cache = 1 nbc_ofile_hashsz = 12841

nbc_pseg = 0 nbc_pseg_limit = 30146560

ndd_event_name = {Al}

ndd_event_tracing = 0

ndp_mmaxtries = 3

ndp_umaxtries = 3

ndpqsize = 50

ndpt_down = 3

ndpt_keep = 120

ndpt_probe = 5

ndpt_reachable = 30






ndpt_retrans = 1

net_buf_size = {Al}

net_buf_type = {Al}

net_malloc_frag_mask = {0}

netm_page_promote = 1

nonlocsrcroute=1

nstrpush = 8

passive_dgd = 0

pmtu_default_age = 10

pmtu_expire = 10

pmtu_rediscover_interval = 30

psebufcalls = 20 psecache = 1

psetimers = 20

rfc1122addrchk = 0 rfc1323 = 0

rfc2414 = 1

route _expire = 1

routerevalidate=1

rto_high = 64

rto_length = 13

rto_limit = 7

rto_low = 1

sack = 0

sb_max = 1048576

send_file_duration = 300

site6_index = 0

sockthresh = 85

sodebug = 0

sodebug_env = 0

somaxconn = 1024

strctlsz = 1024

strmsgsz = 0 strthresh = 85

strturncnt = 15

subnetsarelocal=0

tcp_bad_port_limit = 0

tcp_ecn = 0

tcp_ephemeral_high = 65535

tcp_ephemeral_low = 32768

tcp_finwait2 = 1200

tcp_icmpsecure = 0

tcp_init_window = 0 tcp_inpcb_hashtab_siz = 24499

tcp_keepcnt = 8






tcp_keepidle = 14400

tcp_keepinit = 150

tcp_keepintvl = 150

tcp_limited_transmit = 1

tcp_low_rto = 0

tcp_maxburst = 0

tcp_mssdflt = 1460

tcp_nagle_limit = 65535

tcp_nagleoverride = 0

tcp_ndebug = 100

tcp_newreno = 1

tcp_nodelayack = 0 tcp_pmtu_discover = 1

tcp_recvspace = 16384

tcp_sendspace = 16384 tcp_tcpsecure = 0

tcp_timewait = 1

tcp_ttl = 60

tcprexmtthresh = 3

tcptr_enable = 0

thewall = 60293120

timer_wheel_tick = 0

tn_filter = 1

udp_bad_port_limit = 0

udp_ephemeral_high = 65535

udp_ephemeral_low = 32768

udp_inpcb_hashtab_siz = 24499

udp_pmtu_discover = 1

udp_recvspace = 42080

udp_sendspace = 9216

udp_ttl = 30

udpcksum = 1

use_sndbufpool = 1

================================================================================ COMMAND: clchsyncd ================================================================================ syncd frequency: 10 High toilets mark: 33 Low toilets mark: 24

================================================================================ COMMAND: lsdev - DC yew ================================================================================

en0 Available Standard Network Ethernet Interfaces et0 Defined IEEE 802.3 Network Ethernet Interfaces lo0 Available Loopback Network Interfaces






================================================================================ COMMAND: lsdev - DC disk ================================================================================ hdisk0 Available Virtual SCSI Disk Drive hdisk1 Available 18-T1-01 IBM MPIO FC 2107 hdisk2 Available 18-T1-01 IBM MPIO FC 2107 hdisk3 Available 14-T1-01 IBM MPIO FC 2107 hdisk4 Available 14-T1-01 IBM MPIO FC 2107 hdisk5 Available 14-T1-01 IBM MPIO FC 2107 hdisk6 Available 14-T1-01 IBM MPIO FC 2107 hdisk7 Available 14-T1-01 IBM MPIO FC 2107 hdisk8 Available 14-T1-01 IBM MPIO FC 2107 hdisk9 Available 14-T1-01 IBM MPIO FC 2107 hdisk10 Available 14-T1-01 IBM MPIO FC 2107

hdisk11 Available 14-T1-01 IBM MPIO FC 2107 hdisk12 Available 14-T1-01 IBM MPIO FC 2107 hdisk13 Available 14-T1-01 IBM MPIO FC 2107 hdisk14 Available 14-T1-01 IBM MPIO FC 2107 hdisk15 Available 14-T1-01 IBM MPIO FC 2107 hdisk16 Available 14-T1-01 IBM MPIO FC 2107 hdisk17 Available 18-T1-01 IBM MPIO FC 2107 hdisk18 Available 18-T1-01 IBM MPIO FC 2107 hdisk19 Available 18-T1-01 IBM MPIO FC 2107 hdisk20 Available 18-T1-01 IBM MPIO FC 2107 hdisk21 Available 18-T1-01 IBM MPIO FC 2107 hdisk22 Available 18-T1-01 IBM MPIO FC 2107 hdisk23 Available 18-T1-01 IBM MPIO FC 2107



hdisk50 Available 12-T1-01 IBM MPIO FC 2107

================================================================================






COMMAND: lsvg ================================================================================ rootvg VGCL_PM6redo VGCL_PM6log VGCL_HB_D3 VGCL_HB_D2 FS01vg VGCL_PM6dat1 VGCL_PM6dat2 VGCL_PM6dat3 VG_TEMPO

================================================================================ COMMAND: lspv ================================================================================ hdisk0 00c6e0d4c0586bb9 rootvg active hdisk1 00c6e0d4c56889a7 VGCL_HB_D2 hdisk2 00c6e0d4c5688a8d VGCL_PM6log competitor hdisk3 00c6e0d4c5688bae VGCL_PM6log competitor

hdisk4 00c6e0d4c5688caf VGCL_HB_D3 hdisk5 00c6e0d4ee533cc6 VGCL_PM6log competitor hdisk6 00c6e0d4ee533d38 VGCL_PM6redo competitor hdisk7 00c6e0d4ee533daa VGCL_PM6dat1 competitor hdisk8 00c6e0d4ee533e1a VGCL_PM6dat1 competitor hdisk9 00c6e0d4ee533e96 VGCL_PM6dat2 competitor

hdisk10 00c6e0d4ee533f0b VGCL_PM6dat2 competitor hdisk11 00c6e0d4ee533f8a VGCL_PM6dat2 competitor hdisk12 00c6e0d4ee533ffe VGCL_PM6dat3 competitor hdisk13 00c6e0d4ee5340a8 VGCL_PM6log competitor hdisk14 00c6e0d4ee53411b VGCL_PM6log competitor hdisk15 00c6e0d4ee53419a VGCL_PM6dat1 competitor hdisk16 00c6e0d4ee53420c VGCL_PM6dat1 competitor hdisk17 00c6e0d4ee534282 VGCL_PM6dat1 competitor hdisk18 00c6e0d4ee534306 VGCL_PM6dat2 competitor hdisk19 00c6e0d4ee534375 VGCL_PM6dat2 competitor hdisk20 00c6e0d4ee5343f2 VGCL_PM6dat3 competitor hdisk21 00c6e0d4ee534473 VGCL_PM6dat3 competitor hdisk22 00c6e0d4ee5344f1 FS01vg active

hdisk23 00c6e0d4ee534564 VGCL_PM6log competitor hdisk24 00c6e0d4ee5345ce VGCL_PM6redo competitor hdisk25 00c6e0d4ee534639 VGCL_PM6dat1 competitor hdisk26 00c6e0d4ee5346c0 VGCL_PM6dat1 competitor hdisk27 00c6e0d4ee534733 VGCL_PM6dat2 competitor hdisk28 00c6e0d4ee5347a9 VGCL_PM6dat2 competitor hdisk29 00c6e0d4ee53481e VGCL_PM6dat2 competitor hdisk30 00c6e0d4ee534894 VGCL_PM6dat3 competitor hdisk31 00c6e0d4ee534901 VG_TEMPO active hdisk32 00c6e0d4ee534980 VGCL_PM6log competitor hdisk33 00c6e0d4ee5349f1 VGCL_PM6log competitor hdisk34 00c6e0d4ee534a5d VGCL_PM6dat1 competitor hdisk35 00c6e0d4ee534ad5 VGCL_PM6dat1 competitor hdisk36 00c6e0d4ee534b45 VGCL_PM6dat1 competitor hdisk37 00c6e0d4ee 534bd 4 VGCL_PM6dat2 competitor hdisk38 00c6e0d4ee534c4e VGCL_PM6dat2 competitor hdisk39 00c6e0d4ee534cbb VGCL_PM6dat3 competitor






hdisk40 00c6e0d4ee534d2f VGCL_PM6dat3 competitor hdisk41 00c6e0d4ee534d99 VG_TEMPO active hdisk42 00c6e0d4ee534e12 VG_TEMPO active hdisk43 00c6e0c44df3c266 Nun hdisk44 00c6e0c44df3f640 VGCL_PM6log competitor hdisk45 00c6e0c44df41276 VGCL_PM6log competitor hdisk46 00c6e0c44df4299f Nun hdisk47 00c6e0d496e3dbee VGCL_PM6log competitor hdisk48 00c6e0d496e3fb07 VGCL_PM6log competitor hdisk49 00c6e0d496e41099 VGCL_PM6log competitor hdisk50 00c6e0d496e4291a VGCL_PM6log competitor

================================================================================

COMMAND: df ================================================================================ Filesystem 512-blocks Free %Used Iused %Iused Mounted one /dev/hd4 2883584 2269960 22% 13340 5%/ /dev/hd2 6029312 1445208 77% 46017 22% /usr /dev/hd9var 2359296 935152 61% 27558 21% /var /dev/hd3 4456448 3712304 17% 2702 1% /tmp /dev/hd11admin 262144 261416 1% 5 1% /admin /proc - - - - - /proc /dev/hd10opt 262144 66880 75% 2054 21% /opt /dev/lvusers 2097152 2095968 1% 31 1% /usersconnect /dev/lvfs01 13762560 12988568 6% 3750 1% /FS01 /dev/lvfs80 19005440 15006416 22% 212459 12% /FS80

/dev/lv_tempo 524288000 235012976 56% 8901 1% /TEMPO /dev/pm6lvcft 1966080 1309432 34% 8326 6% /FS01/logiciel/cft /dev/pm6lvdazl 4063232 2872968 30% 8829 3% /FS01/logiciel/hpos /dev/pm6lvadm 917504 906080 2% 37 1% /home/pm6adm /dev/pm6lvint 1835008 1834072 1% 4 1% /inter /dev/pm6lvscan 1835008 1834040 1% 4 1% /invscan /dev/PM6_lvora 5242880 4697808 11% 671 1% /oracle /dev/lvorapm6 12058624 3284304 73% 19710 5% /oracle/PM6 /dev/pm6lvmirA 1048576 523392 51% 5 1% /oracle/PM6/mirrlogA /dev/pm6lvmirB 1048576 523392 51% 5 1% /oracle/PM6/mirrlogB /dev/pm6lvorarch 123731968 102000032 18% 93 1% /oracle/PM6/oraarch /dev/pm6lvoriA 1048576 498016 53% 7 1% /oracle/PM6/origlogA /dev/pm6lvoriB 1048576 523392 51% 5 1% /oracle/PM6/origlogB

/dev/pm6lvdata1 614203392 216796752 65% 18 1% /oracle/PM6/sapdata1 /dev/pm6lvdata2 614203392 220892744 65% 15 1% /oracle/PM6/sapdata2 /dev/pm6lvdata3 614203392 220892776 65% 15 1% /oracle/PM6/sapdata3 /dev/pm6lvdata4 614203392 282332768 55% 15 1% /oracle/PM6/sapdata4 /dev/pm6lvdata5 614203392 282307456 55% 17 1% /oracle/PM6/sapdata5 /dev/pm6lvdata6 81788928 71944792 13% 5 1% /oracle/PM6/sapdata6 /dev/pm6lvsapreog 4063232 4061944 1% 4 1% /oracle/PM6/sapreorg /dev/pm6lvorastg 17039360 6638064 62% 11045 2% /oracle/stage /dev/pm6lvmnt 12845056 7322672 43% 196304 20% /sapmnt/PM6 /dev/pm6lvmntpool 127664128 89669320 30% 86025 1% /sapmnt/PM6/global/600SPOOL /dev/pm6lvusrsap 6029312 6018688 1% 17 1% /usr/sap /dev/pm6lvusap 20447232 13988544 32% 575 1% /usr/sap/PM6 /dev/pm6lvdveb 16252928 16249792 1% 3 1% /usr/sap/PM6/DVEBMGS00/work/tri /dev/pm6lvarching 61341696 35740608 42% 305 1% /usr/sap/archiving /dev/pm6lvstrans 32768000 6765232 80% 90811 11% /usr/sap/trans nimad2p3: /export/nim/outils 124780544 60316872 52% 51790 1% /mnt






================================================================================ COMMAND: mount ================================================================================ node mounted mounted over vfs dates options

-------- --------------- --------------- ------ ------------ --------------- /dev/hd4/jfs October 2nd, 08 17:59 rw, log=/dev/hd8

/dev/hd2 /usr jfs October 2nd, 08 17:59 rw, log=/dev/hd8

/dev/hd9var /var jfs October 2nd, 08 17:59 rw, log=/dev/hd8

/dev/hd3 /tmp jfs October 2nd, 08 17:59 rw, log=/dev/hd8 /dev/hd11admin /admin jfs October 2nd, 08 17:59 rw, log=/dev/hd8

/proc /proc procfs Oct. 08 17:59 rw

/dev/hd10opt /opt jfs October 2nd, 08 17:59 rw, log=/dev/hd8

/dev/lvusers /usersconnect jfs October 2nd, 08 17:59 rw, log=/dev/hd8 /dev/lvfs01 /FS01 jfs October 2nd, 08 17:59 rw, log=/dev/logvgfs01

/dev/lvfs80 /FS80 jfs October 2nd, 08 17:59 rw, log=/dev/logvgfs01

/dev/lv_tempo /TEMPO jfs October 2nd, 08 17:59 rw, log=/dev/loglv00

/dev/pm6lvcft /FS01/logiciel/cft jfs2 Oct. 08 18:09 rw, log=/dev/log_PM6log

/dev/pm6lvdazl /FS01/logiciel/hpos jfs2 Oct. 08 18:09 rw,log=/dev/log_PM6log

/dev/pm6lvadm /home/pm6adm jfs October 2nd, 08 18:09 rw, log=/dev/log_PM6log

/dev/pm6lvint /inter jfs October 2nd, 08 18:09 rw, log=/dev/log_PM6redo

/dev/pm6lvscan /invscan jfs October 2nd, 08 18:09 rw, log=/dev/log_PM6redo

/dev/PM6_lvora /oracle jfs October 2nd, 08 18:09 rw, cio,log=/dev/log_PM6log

/dev/lvorapm6 /oracle/PM6 jfs October 2nd, 08 18:09 rw, log=/dev/log_PM6log

/dev/pm6lvmirA /oracle/PM6/mirrlogA jfs2 Oct. 08 18:09 rw, cio,log=/dev/log_PM6redo

/dev/pm6lvmirB /oracle/PM6/mirrlogB jfs2 Oct. 08 18:09 rw, cio,log=/dev/log_PM6redo

/dev/pm6lvorarch /oracle/PM6/oraarch jfs2 Oct. 08 18:09 rw,log=/dev/log_PM6log

/dev/pm6lvoriA /oracle/PM6/origlogA jfs2 Oct. 08 18:09 rw, cio,log=/dev/log_PM6redo

/dev/pm6lvoriB /oracle/PM6/origlogB jfs2 Oct. 08 18:09 rw, cio,

log=/dev/log_PM6redo /dev/pm6lvdata1 /oracle/PM6/sapdata1 jfs2 Oct. 08 18:09 rw, cio,

log=/dev/log_PM6dat1 /dev/pm6lvdata2 /oracle/PM6/sapdata2 jfs2 Oct. 08 18:09 rw, cio,





log=/dev/log_PM6dat3 /dev/pm6lvsapreog /oracle/PM6/sapreorg jfs2 Oct. 08 18:09 rw,

log=/dev/log_PM6log






/dev/pm6lvorastg /oracle/stage jfs October 2nd, 08 18:09 rw,log=/dev/log_PM6redo

/dev/pm6lvmnt /sapmnt/PM6 jfs October 2nd, 08 18:09 rw, log=/dev/log_PM6log

/dev/pm6lvmntpool /sapmnt/PM6/global/600SPOOL jfs2 Oct. 08 18:09 rw,log=/dev/log_PM6log

/dev/pm6lvusrsap /usr/sap jfs October 2nd, 08 18:09 rw, log=/dev/log_PM6log

/dev/pm6lvusap /usr/sap/PM6 jfs October 2nd, 08 18:09 rw,log=/dev/log_PM6log

/dev/pm6lvdveb /usr/sap/PM6/DVEBMGS00/work/tri jfs2 Oct. 08 18:09 rw,log=/dev/log_PM6redo

/dev/pm6lvarching /usr/sap/archiving jfs2 Oct. 08 18:09 rw,log=/dev/log_PM6log

/dev/pm6lvstrans /usr/sap/trans jfs October 2nd, 08 18:09 rw,log=/dev/log_PM6log nimad2p3 /export/nim/outils /mnt NFS November 3rd, 02 16:25

================================================================================ COMMAND: exportfs ================================================================================ exportfs: nothing exported

================================================================================ COMMAND: lsfs ================================================================================

Name Nodename Mount Pt VFS Size Options Accounting Car /dev/hd4 -- /jfs2 2883584 -- yes No /dev/hd2 -- /usr jfs2 6029312 -- yes No /dev/hd9var -- /var jfs2 2359296 -- yes No /dev/hd3 -- /tmp jfs2 4456448 -- yes No /dev/hd11admin -- /admin jfs2 262144 -- yes No /proc -- /proc procfs -- -- yes No /dev/hd10opt -- /opt jfs2 262144 -- yes No /dev/lvusers -- /usersconnect jfs2 2097152 rw yes No /dev/lvfs01 -- /FS01 jfs2 13762560 -- yes No /dev/lvfs80 -- /FS80 jfs2 19005440 -- yes No /dev/pm6lvscan -- /invscan jfs2 1835008 rw No No /dev/pm6lvint -- /inter jfs2 1835008 rw No No

/dev/pm6lvdveb -- /usr/sap/PM6/DVEBMGS00/work/tri jfs2 16252928 rw NoNo /dev/pm6lvmirA -- /oracle/PM6/mirrlogA jfs2 1048576 cios, rw No No /dev/pm6lvmirB -- /oracle/PM6/mirrlogB jfs2 1048576 cios, rw No No /dev/pm6lvoriB -- /oracle/PM6/origlogB jfs2 1048576 cios, rw No No /dev/pm6lvoriA -- /oracle/PM6/origlogA jfs2 1048576 cios, rw No No /dev/pm6lvorastg -- /oracle/stage jfs2 17039360 rw No No /dev/pm6lvdata1 -- /oracle/PM6/sapdata1 jfs2 614203392 cios, rw No No /dev/pm6lvdata2 -- /oracle/PM6/sapdata2 jfs2 614203392 cios, rw No No /dev/pm6lvdata3 -- /oracle/PM6/sapdata3 jfs2 614203392 cios, rw No No /dev/pm6lvdata4 -- /oracle/PM6/sapdata4 jfs2 614203392 cios, rw No No /dev/pm6lvdata5 -- /oracle/PM6/sapdata5 jfs2 614203392 cios, rw No No /dev/lv_tempo -- /TEMPO jfs2 524288000 rw yes No /dev/pm6lvdata6 -- /oracle/PM6/sapdata6 jfs2 81788928 cios, rw No No /dev/PM6_lvora -- /oracle jfs2 5242880 cios, rw No No /dev/lvorapm6 -- /oracle/PM6 jfs2 12058624 rw No No /dev/pm6lvorarch -- /oracle/PM6/oraarch jfs2 123731968 rw No No








5.4.1.0 MADE SUPPLEMENTS 9/6/09 11:31: 49


cluster.es.cl ient. rte

5.4.0.0 MADE SUPPLEMENTS 9/6/09 11:29: 22 5.4.1.0 MADE SUPPLEMENTS 9/6/09 11:31: 49


cluster.es.cl ient.utils




cluster.es.cl ient. wsm




cluster.es.cs poc.cmds




cluster.es.cs poc. dsh



cluster.es.cs poc. rte




cluster.es.pl ugins.dhcp 5.4.0.0 MADE SUPPLEMENTS 9/6/09 11:29: 18


cluster.es.pl ugins. dns






cluster.es.se rver.cfgast








cluster.es.se rver.diag



cluster.es.se rver.events




cluster.es.se rver. rte




cluster.es.se rver.testtool




cluster.es.se rver.utils




cluster.es.wo rksheets




cluster.license



Path: /etc/objrepos cluster.es.cl ient. lib


























Path: /usr/share/lib/objrepos

cluster.man.en_US.es.da your 5.4.0.0 MADE SUPPLEMENTS 9/6/09 11:29: 17



================================================================================ COMMAND: ifconfig en0 ================================================================================ en0: flags=1e080863,480<UP, BROADCAST, NOTRAILERS, RUNNING, SIMPLEX, multicast,

GROUPRT, 64BIT, CHECKSUM_OFFLOAD (ACTIVATES), CHAIN> inet 7.27.224.62 netmask 0xffffff00 broadcast 7.27.224.255

inet 192.168.40.191 netmask 0xffffff00 broadcast 192.168.40.255 inet 192.168.40.190 netmask 0xffffff00 broadcast 192.168.40.255 tcp_sendspace 262144 tcp_recvspace 262144 rfc1323 1

================================================================================ COMMAND: ifconfig lo0 ================================================================================ lo0: flags=e08084b<UP, BROADCAST, LOOPBACK, RUNNING, SIMPLEX, multicast,GROUPRT, 64BIT>

inet 127.0.0.1 netmask 0xff000000 broadcast 127.255.255.255

inet6:: 1/0

tcp_sendspace 131072 tcp_recvspace 131072 rfc1323 1

================================================================================ COMMAND: lsvg - L VGCL_PM6redo






================================================================================ VGCL_PM6redo: STANDARD LV NAME LPs PPs special minutes LV STATE MOUNT NOT pm6lvscan jfs2 7 14 2 open/syncd /invscan log_PM6redo jfs2log 1 2 2 open/syncd N/A pm6lvint jfs2 7 14 2 open/syncd /inter pm6lvdveb jfs2 62 124 2 open/syncd /usr/sap/PM6/DVEBMGS00/work/tri pm6lvmirA jfs2 4 8 2 open/syncd /oracle/PM6/mirrlogA pm6lvmirB jfs2 4 8 2 open/syncd /oracle/PM6/mirrlogB pm6lvoriB jfs2 4 8 2 open/syncd /oracle/PM6/origlogB pm6lvoriA jfs2 4 8 2 open/syncd /oracle/PM6/origlogA pm6lvorastg jfs2 65 130 2 open/syncd /oracle/stage

================================================================================ COMMAND: lsvg - L VGCL_PM6log ================================================================================ VGCL_PM6log: STANDARD LV NAME LPs PPs special minutes LV STATE MOUNT NOT log_PM6log jfs2log 1 2 2 open/syncd N/A PM6_lvora jfs2 40 80 2 open/syncd /oracle lvorapm6 jfs2 92 184 2 open/syncd /oracle/PM6 pm6lvorarch jfs2 944 1888 6 open/syncd /oracle/PM6/oraarch pm6lvsapreog jfs2 31 62 2 open/syncd /oracle/PM6/sapreorg pm6lvmnt jfs2 98 196 2 open/syncd /sapmnt/PM6 pm6lvmntpool jfs2 974 1948 7 open/syncd /sapmnt/PM6/global/600SPOOL pm6lvusrsap jfs2 46 92 2 open/syncd /usr/sap pm6lvusap jfs2 156 312 2 open/syncd /usr/sap/PM6 pm6lvstrans jfs2 250 500 2 open/syncd /usr/sap/trans pm6lvadm jfs2 7 14 2 open/syncd /home/pm6adm pm6lvarching jfs2 468 936 4 open/syncd /usr/sap/archiving pm6lvcft jfs2 15 30 2 open/syncd /FS01/logiciel/cft pm6lvdazl jfs2 31 62 2 open/syncd /FS01/logiciel/hpos

================================================================================ COMMAND: lsvg - L VGCL_PM6dat3 ================================================================================ VGCL_PM6dat3: STANDARD LV NAME LPs PPs special minutes LV STATE MOUNT NOT pm6lvdata5 jfs2 2343 4686 6 open/syncd /oracle/PM6/sapdata5 log_PM6dat3 jfs2log 1 2 2 open/syncd N/A pm6lvdata6 jfs2 312 624 2 open/syncd /oracle/PM6/sapdata6

================================================================================ COMMAND: lsvg - L VGCL_PM6dat2 ================================================================================ VGCL_PM6dat2: STANDARD LV NAME LPs PPs special minutes LV STATE MOUNT NOT pm6lvdata3 jfs2 2343 4686 6 open/syncd /oracle/PM6/sapdata3 log_PM6dat2 jfs2log 1 2 2 open/syncd N/A pm6lvdata4 jfs2 2343 4686 6 open/syncd /oracle/PM6/sapdata4

================================================================================

COMMAND: lsvg - L VGCL_PM6dat1 ================================================================================ VGCL_PM6dat1: STANDARD LV NAME LPs PPs special minutes LV STATE MOUNT NOT






pm6lvdata1 jfs2 2343 4686 6 open/syncd /oracle/PM6/sapdata1 log_PM6dat1 jfs2log 1 2 2 open/syncd N/A pm6lvdata2 jfs2 2343 4686 6 open/syncd /oracle/PM6/sapdata2

================================================================================ COMMAND: lsvg - L VG_TEMPO ================================================================================ VG_TEMPO: STANDARD LV NAME LPs PPs special minutes LV STATE MOUNT NOT lv_tempo jfs2 1000 1000 3 open/syncd /TEMPO open loglv00 jfs2log 1 1 1/syncd N/A

================================================================================ COMMAND: lsvg - L FS01vg ================================================================================ FS01vg: STANDARD LV NAME LPs PPs special minutes LV STATE MOUNT NOT open logvgfs01 jfs2log 1 1 1/syncd N/A lvfs01 jfs2 210 210 1 open/syncd /FS01 lvfs80 jfs2 290 290 1 open/syncd /FS80

================================================================================ COMMAND: lsvg - L rootvg ================================================================================ rootvg: STANDARD LV NAME LPs PPs special minutes LV STATE MOUNT NOT

hd5 bootup 1 1 1 closed/syncd N/A hd6 paging 235 235 1 open/syncd N/A open hd8 jfs2log 1 1 1/syncd N/A hd4 jfs2 11 11 1 open/syncd/ hd2 jfs2 23 23 1 open/syncd /usr hd9var jfs2 9 9 1 open/syncd /var hd3 jfs2 17 17 1 open/syncd /tmp open hd10opt jfs2 1 1 1/syncd /opt open hd11admin jfs2 1 1 1/syncd /admin lg_dumplv sysdump 32 32 1 open/syncd N/A lvusers jfs2 8 8 1 open/syncd /usersconnect

================================================================================

COMMAND: lslv - L pm6lvscan ================================================================================ pm6lvscan: /invscan STATEMENT COPIES IN BAND DISTRIBUTION hdisk6 007:000: 000 100% 000:007: 000:000: 000 hdisk24 007:000: 000 100% 000:007: 000:000: 000

================================================================================ COMMAND: lslv - L log_PM6redo ================================================================================ log_PM6redo: N/A STATEMENT COPIES IN BAND DISTRIBUTION hdisk6 001:000: 000 100% 000:001: 000:000: 000 hdisk24 001:000: 000 0% 000:000: 000:000: 001

================================================================================






COMMAND: lslv - L pm6lvint ================================================================================ pm6lvint: /inter STATEMENT COPIES IN BAND DISTRIBUTION hdisk6 007:000: 000 100% 000:007: 000:000: 000 hdisk24 007:000: 000 100% 000:007: 000:000: 000

================================================================================ COMMAND: lslv - L pm6lvdveb ================================================================================ pm6lvdveb: /usr/sap/PM6/DVEBMGS00/work/tri STATEMENT COPIES IN BAND DISTRIBUTION hdisk6 062:000: 000 27% 000:017: 031:014: 000

hdisk24 062:000: 000 29% 000:018: 031:013: 000

================================================================================ COMMAND: lslv - L pm6lvmirA ================================================================================ pm6lvmirA: /oracle/PM6/mirrlogA

STATEMENT COPIES IN BAND DISTRIBUTION hdisk6 004:000: 000 0% 004:000: 000:000: 000 hdisk24 004:000: 000 0% 004:000: 000:000: 000

================================================================================ COMMAND: lslv - L pm6lvmirB ================================================================================ pm6lvmirB: /oracle/PM6/mirrlogB STATEMENT COPIES IN BAND DISTRIBUTION hdisk6 004:000: 000 0% 004:000: 000:000: 000 hdisk24 004:000: 000 0% 004:000: 000:000: 000

================================================================================ COMMAND: lslv - L pm6lvoriB ================================================================================ pm6lvoriB: /oracle/PM6/origlogB


================================================================================ COMMAND: lslv - L pm6lvoriA ================================================================================ pm6lvoriA: /oracle/PM6/origlogA STATEMENT COPIES IN BAND DISTRIBUTION hdisk6 004:000: 000 0% 004:000: 000:000: 000 hdisk24 004:000: 000 0% 004:000: 000:000: 000

================================================================================ COMMAND: lslv - L pm6lvorastg ================================================================================

pm6lvorastg: /oracle/stage STATEMENT COPIES IN BAND DISTRIBUTION hdisk6 065:000: 000 0% 016:000: 000:018: 031 hdisk24 065:000: 000 0% 016:000: 000:019: 030






================================================================================ COMMAND: lslv - L log_PM6log ================================================================================ log_PM6log: N/A STATEMENT COPIES IN BAND DISTRIBUTION hdisk2 001:000: 000 0% 001:000: 000:000: 000 hdisk3 001:000: 000 0% 001:000: 000:000: 000

================================================================================ COMMAND: lslv - L PM6_lvora ================================================================================ PM6_lvora: /oracle


================================================================================ COMMAND: lslv - L lvorapm6 ================================================================================ lvorapm6: /oracle/PM6 STATEMENT COPIES IN BAND DISTRIBUTION hdisk5 092:000: 000 100% 000:092: 000:000: 000 hdisk23 092:000: 000 100% 000:092: 000:000: 000

================================================================================ COMMAND: lslv - L pm6lvorarch ================================================================================ pm6lvorarch: /oracle/PM6/oraarch STATEMENT COPIES IN BAND DISTRIBUTION hdisk14 355:000: 000 28% 103:102: 102:006: 042 hdisk33 355:000: 000 28% 103:102: 102:006: 042 hdisk44 511:000: 000 19% 103:102: 102:102: 102 hdisk45 511:000: 000 19% 103:102: 102:102: 102 hdisk2 036:000: 000 0% 001:000: 000:025: 010 hdisk3 120:000: 000 0% 001:000: 000:025: 094

================================================================================

COMMAND: lslv - L pm6lvsapreog ================================================================================ pm6lvsapreog: /oracle/PM6/sapreorg STATEMENT COPIES IN BAND DISTRIBUTION hdisk5 031:000: 000 0% 031:000: 000:000: 000 hdisk23 031:000: 000 0% 031:000: 000:000: 000

================================================================================ COMMAND: lslv - L pm6lvmnt ================================================================================ pm6lvmnt: /sapmnt/PM6 STATEMENT COPIES IN BAND DISTRIBUTION

hdisk5 098:000: 000 0% 000:000: 000:098: 000 hdisk23 098:000: 000 0% 000:000: 000:098: 000

================================================================================








================================================================================ COMMAND: lslv - L pm6lvcft ================================================================================ pm6lvcft: /FS01/logiciel/cft STATEMENT COPIES IN BAND DISTRIBUTION hdisk2 015:000: 000 0% 015:000: 000:000: 000 hdisk3 015:000: 000 0% 015:000: 000:000: 000

================================================================================ COMMAND: lslv - L pm6lvdazl ================================================================================ pm6lvdazl: /FS01/logiciel/hpos STATEMENT COPIES IN BAND DISTRIBUTION

hdisk2 031:000: 000 0% 000:000: 000:031: 000 hdisk3 031:000: 000 0% 000:000: 000:031: 000

================================================================================ COMMAND: lslv - L pm6lvdata5 ================================================================================ pm6lvdata5: /oracle/PM6/sapdata5 STATEMENT COPIES IN BAND DISTRIBUTION hdisk12 1023:000: 000 20% 205:205: 204:204: 205 hdisk30 1023:000: 000 20% 205:205: 204:204: 205 hdisk20 1023:000: 000 20% 205:205: 204:204: 205 hdisk39 1023:000: 000 20% 205:205: 204:204: 205 hdisk21 297:000: 000 69% 000:205: 092:000: 000 hdisk40 297:000: 000 69% 000:205: 092:000: 000

================================================================================ COMMAND: lslv - L log_PM6dat3 ================================================================================ log_PM6dat3: N/A STATEMENT COPIES IN BAND DISTRIBUTION hdisk21 001:000: 000 0% 001:000: 000:000: 000 hdisk40 001:000: 000 0% 001:000: 000:000: 000

================================================================================ COMMAND: lslv - L pm6lvdata6

================================================================================ pm6lvdata6: /oracle/PM6/sapdata6 STATEMENT COPIES IN BAND DISTRIBUTION hdisk21 312:000: 000 0% 000:000: 112:200: 000 hdisk40 312:000: 000 0% 000:000: 112:200: 000

================================================================================ COMMAND: lslv - L pm6lvdata3 ================================================================================ pm6lvdata3: /oracle/PM6/sapdata3 STATEMENT COPIES IN BAND DISTRIBUTION hdisk9 1023:000: 000 20% 205:205: 204:204: 205 hdisk27 1023:000: 000 20% 205:205: 204:204: 205 hdisk10 1023:000: 000 20% 205:205: 204:204: 205 hdisk28 1023:000: 000 20% 205:205: 204:204: 205 hdisk11 297:000: 000 69% 000:205: 092:000: 000






hdisk29 297:000: 000 69% 000:205: 092:000: 000

================================================================================ COMMAND: lslv - L log_PM6dat2 ================================================================================ log_PM6dat2: N/A STATEMENT COPIES IN BAND DISTRIBUTION hdisk37 001:000: 000 100% 000:001: 000:000: 000 hdisk19 001:000: 000 0% 001:000: 000:000: 000

================================================================================ COMMAND: lslv - L pm6lvdata4 ================================================================================

pm6lvdata4: /oracle/PM6/sapdata4 STATEMENT COPIES IN BAND DISTRIBUTION hdisk11 726:000: 000 0% 205:000: 112:204: 205 hdisk29 726:000: 000 0% 205:000: 112:204: 205 hdisk18 1023:000: 000 20% 205:205: 204:204: 205 hdisk37 1022:000: 000 19% 205:204: 204:204: 205 hdisk38 595:000: 000 34% 186:205: 204:000: 000 hdisk19 594:000: 000 34% 185:205: 204:000: 000

================================================================================ COMMAND: lslv - L pm6lvdata1 ================================================================================ pm6lvdata1: /oracle/PM6/sapdata1

STATEMENT COPIES IN BAND DISTRIBUTION hdisk7 1022:000: 000 19% 205:204: 204:204: 205 hdisk25 1022:000: 000 19% 205:204: 204:204: 205 hdisk8 1022:000: 000 19% 205:204: 204:204: 205 hdisk26 1022:000: 000 19% 205:204: 204:204: 205 hdisk15 299:000: 000 68% 000:204: 095:000: 000 hdisk34 299:000: 000 68% 000:204: 095:000: 000

================================================================================ COMMAND: lslv - L log_PM6dat1 ================================================================================ log_PM6dat1: N/A


================================================================================ COMMAND: lslv - L pm6lvdata2 ================================================================================ pm6lvdata2: /oracle/PM6/sapdata2 STATEMENT COPIES IN BAND DISTRIBUTION hdisk15 723:000: 000 0% 205:000: 109:204: 205 hdisk34 723:000: 000 0% 205:000: 109:204: 205 hdisk16 1022:000: 000 19% 205:204: 204:204: 205 hdisk35 1022:000: 000 19% 205:204: 204:204: 205

hdisk17 598:000: 000 34% 190:204: 204:000: 000 hdisk36 598:000: 000 33% 191:203: 204:000: 000






================================================================================ COMMAND: lslv - L lv_tempo ================================================================================ lv_tempo: /TEMPO STATEMENT COPIES IN BAND DISTRIBUTION hdisk31 511:000: 000 19% 103:102: 102:102: 102 hdisk41 255:000: 000 20% 051:051: 051:051: 051 hdisk42 234:000: 000 21% 051:051: 051:051: 030

================================================================================ COMMAND: lslv - L loglv00 ================================================================================ loglv00: N/A

STATEMENT COPIES IN BAND DISTRIBUTION hdisk42 001:000: 000 0% 000:000: 000:000: 001

================================================================================ COMMAND: lslv - L logvgfs01 ================================================================================ logvgfs01: N/A STATEMENT COPIES IN BAND DISTRIBUTION hdisk22 001:000: 000 100% 000:001: 000:000: 000

================================================================================ COMMAND: lslv - L lvfs01 ================================================================================ lvfs01: /FS01 STATEMENT COPIES IN BAND DISTRIBUTION hdisk22 210:000: 000 24% 057:051: 102:000: 000


================================================================================ COMMAND: lslv - L hd5 ================================================================================ hd5: N/A STATEMENT COPIES IN BAND DISTRIBUTION hdisk0 001:000: 000 100% 001:000: 000:000: 000


================================================================================ COMMAND: lslv - L hd8






================================================================================ hd8: N/A STATEMENT COPIES IN BAND DISTRIBUTION hdisk0 001:000: 000 100% 000:000: 001:000: 000

================================================================================ COMMAND: lslv - L hd4 ================================================================================ hd4: / STATEMENT COPIES IN BAND DISTRIBUTION hdisk0 011:000: 000 36% 000:000: 004:007: 000

================================================================================

COMMAND: lslv - L hd2 ================================================================================ hd2: /usr STATEMENT COPIES IN BAND DISTRIBUTION hdisk0 023:000: 000 100% 000:000: 023:000: 000

================================================================================ COMMAND: lslv - L hd9var ================================================================================ hd9var: /var STATEMENT COPIES IN BAND DISTRIBUTION hdisk0 009:000: 000 100% 000:000: 009:000: 000

================================================================================ COMMAND: lslv - L hd3 ================================================================================ hd3: /tmp STATEMENT COPIES IN BAND DISTRIBUTION hdisk0 017:000: 000 5% 000:000: 001:016: 000

================================================================================ COMMAND: lslv - L hd10opt ================================================================================ hd10opt: /opt STATEMENT COPIES IN BAND DISTRIBUTION hdisk0 001:000: 000 100% 000:000: 001:000: 000

================================================================================ COMMAND: lslv - L hd11admin ================================================================================ hd11admin: /admin STATEMENT COPIES IN BAND DISTRIBUTION hdisk0 001:000: 000 100% 000:000: 001:000: 000

================================================================================ COMMAND: lslv - L lg_dumplv ================================================================================

lg_dumplv: N/A STATEMENT COPIES IN BAND DISTRIBUTION hdisk0 032:000: 000 100% 000:032: 000:000: 000






================================================================================ COMMAND: lslv - L lvusers ================================================================================ lvusers: /usersconnect STATEMENT COPIES IN BAND DISTRIBUTION hdisk0 008:000: 000 100% 000:008: 000:000: 000

================================================================================ COMMAND: odmget HACMPdaemons ================================================================================

HACMPdaemons:

nodename = “gtyxsappm6p1” daemon = “clstrmgr”

type = “start”

object = “manages”

been worth = “car”

HACMPdaemons: nodename = “gtyxsappm6p1”

daemon = “clstrmgr” type = “start”

object = “broadcast”

been worth = “true”


daemon = “clinfo”

type = “start”

object = “time”



daemon = “clstrmgrES”

type = “stop”

object = “time”

been worth = “now”



type = “stop”


been worth = “false”

HACMPdaemons:






nodename = “gtyxsappm6p1”


type = “stop”

object = “mode”

been worth = “forced”

HACMPdaemons:

nodename = “gtyxsappm6p1” daemon = “clstrmgr_scripts”

type = “resource_locator”

object = “RG_PM6”

been worth = “UP”

HACMPdaemons: nodename = ""

daemon = ""

type = “verify”

object = ""

been worth = “nun”

================================================================================ COMMAND: odmget HACMPsp2 ================================================================================

clsnapshot: Following information is retrieved from node: gtyxsappm6p2 -------------------------------------------------

================================================================================ COMMAND: netstat - I ================================================================================ Name MTU Network Address ZoneID Ipkts Ierrs Opkts Oerrs coll en0 1500 link-2 62.7e.db.3d.ea.14 - 3044970366 0 3188989200 0 0 en0 1500 7.27.224 gtyxsappm6p2_boots - 3044970366 0 3188989200 0 0 en0 1500 192.168.40 gtyxsappm6p2. pharma. avs - 3044970366 0 3188989200 0 0

lo0 16896 link-1 - 3585113 0 3589058 0 0 lo0 16896 127 loopback - 3585113 0 3589058 0 0 lo0 16896:: 1 3 3585113 0 3589058 0 0

================================================================================ COMMAND: netstat - in ================================================================================ Name MTU Network Address ZoneID Ipkts Ierrs Opkts Oerrs coll en0 1500 link-2 62.7e.db.3d.ea.14 - 3044970367 0 3188989200 0 0 en0 1500 7.27.224 7.27.224.63 - 3044970367 0 3188989200 0 0 en0 1500 192.168.40 192.168.40.192 - 3044970367 0 3188989200 0 0 lo0 16896 link-1 - 3585117 0 3589062 0 0 lo0 16896 127 127.0.0.1 - 3585117 0 3589062 0 0

lo0 16896:: 1 3 3585117 0 3589062 0 0

================================================================================






COMMAND: No - has ================================================================================

arpqsize = 12 arpt_killc = 20

arptab_bsiz = 7

arptab_nb = 149

bcastping = 0

clean_partial_conns = 0

delayack = 0

delayackports = {}

dgd_packets_lost = 3

dgd_ping_time = 5 dgd_retry_time = 5

directed_broadcast = 0

fasttimo = 200

icmp6_errmsg_rate = 10

icmpaddressmask = 0 ie5_old_multicast_mapping = 0

ifsize = 256

ip6_defttl = 64

ip6_prune = 1

ip6forwarding = 0

ip6srcrouteforward = 1 ip_ifdelete_notify = 0

ip_nfrag = 200

ipforwarding=0

ipfragttl = 2

ipignoreredirects = 0

ipqmaxlen = 100

ipsendredirects=0

ipsrcrouteforward=1

ipsrcrouterecv = 1

ipsrcroutesend=1

llsleep_timeout = 3

lo_perf = 1

lowthresh = 90

main_if6 = 0

main_site6 = 0

maxnip6q = 20

maxttl = 255 medthresh = 95

mpr_policy = 1

multi_homed = 1

nbc_limit = 15073280 nbc_max_cache = 131072

nbc_min_cache = 1






nbc_ofile_hashsz = 12841

nbc_pseg = 0

nbc_pseg_limit = 30146560

ndd_event_name = {Al}

ndd_event_tracing = 0

ndp_mmaxtries = 3

ndp_umaxtries = 3

ndpqsize = 50

ndpt_down = 3

ndpt_keep = 120

ndpt_probe = 5

ndpt_reachable = 30 ndpt_retrans = 1

net_buf_size = {Al}

net_buf_type = {Al} net_malloc_frag_mask = {0}

netm_page_promote = 1

nonlocsrcroute=1

nstrpush = 8

passive_dgd = 0

pmtu_default_age = 10

pmtu_expire = 10

pmtu_rediscover_interval = 30

psebufcalls = 20

psecache = 1

psetimers = 20

rfc1122addrchk = 0

rfc1323 = 0

rfc2414 = 1

route _expire = 1

routerevalidate=1

rto_high = 64

rto_length = 13 rto_limit = 7

rto_low = 1

sack = 0

sb_max = 1048576

send_file_duration = 300

site6_index = 0

sockthresh = 85

sodebug = 0

sodebug_env = 0

somaxconn = 1024 strctlsz = 1024

strmsgsz = 0






strthresh = 85

strturncnt = 15

subnetsarelocal=0

tcp_bad_port_limit = 0

tcp_ecn = 0

tcp_ephemeral_high = 65535

tcp_ephemeral_low = 32768

tcp_finwait2 = 1200

tcp_icmpsecure = 0

tcp_init_window = 0

tcp_inpcb_hashtab_siz = 24499

tcp_keepcnt = 8 tcp_keepidle = 14400

tcp_keepinit = 150

tcp_keepintvl = 150 tcp_limited_transmit = 1

tcp_low_rto = 0

tcp_maxburst = 0

tcp_mssdflt = 1460

tcp_nagle_limit = 65535

tcp_nagleoverride = 0

tcp_ndebug = 100

tcp_newreno = 1

tcp_nodelayack = 0

tcp_pmtu_discover = 1

tcp_recvspace = 16384

tcp_sendspace = 16384

tcp_tcpsecure = 0

tcp_timewait = 1

tcp_ttl = 60

tcprexmtthresh = 3

tcptr_enable = 0

thewall = 60293120 timer_wheel_tick = 0

tn_filter = 1

udp_bad_port_limit = 0

udp_ephemeral_high = 65535

udp_ephemeral_low = 32768

udp_inpcb_hashtab_siz = 24499

udp_pmtu_discover = 1

udp_recvspace = 42080

udp_sendspace = 9216

udp_ttl = 30 udpcksum = 1

use_sndbufpool = 1






================================================================================ COMMAND: clchsyncd ================================================================================ syncd frequency: 10 High toilets mark: 33 Low toilets mark: 24

================================================================================ COMMAND: lsdev - DC yew ================================================================================ en0 Available Standard Network Ethernet Interfaces et0 Defined IEEE 802.3 Network Ethernet Interfaces lo0 Available Loopback Network Interfaces

================================================================================ COMMAND: lsdev - DC disk ================================================================================ hdisk0 Available Virtual SCSI Disk Drive hdisk1 Available 12-T1-01 IBM MPIO FC 2107 hdisk2 Available 12-T1-01 IBM MPIO FC 2107 hdisk3 Available 12-T1-01 IBM MPIO FC 2107 hdisk4 Available 12-T1-01 IBM MPIO FC 2107 hdisk5 Available 12-T1-01 IBM MPIO FC 2107 hdisk6 Available 12-T1-01 IBM MPIO FC 2107 hdisk7 Available 12-T1-01 IBM MPIO FC 2107

hdisk8 Available 12-T1-01 IBM MPIO FC 2107 hdisk9 Available 12-T1-01 IBM MPIO FC 2107 hdisk10 Available 12-T1-01 IBM MPIO FC 2107 hdisk11 Available 12-T1-01 IBM MPIO FC 2107 hdisk12 Available 12-T1-01 IBM MPIO FC 2107 hdisk13 Available 12-T1-01 IBM MPIO FC 2107 hdisk14 Available 12-T1-01 IBM MPIO FC 2107 hdisk15 Available 12-T1-01 IBM MPIO FC 2107 hdisk16 Available 12-T1-01 IBM MPIO FC 2107 hdisk17 Available 12-T1-01 IBM MPIO FC 2107 hdisk18 Available 12-T1-01 IBM MPIO FC 2107 hdisk19 Available 12-T1-01 IBM MPIO FC 2107 hdisk20 Available 12-T1-01 IBM MPIO FC 2107 hdisk21 Available 12-T1-01 IBM MPIO FC 2107 hdisk22 Available 12-T1-01 IBM MPIO FC 2107 hdisk23 Available 12-T1-01 IBM MPIO FC 2107 hdisk24 Available 12-T1-01 IBM MPIO FC 2107 hdisk25 Available 12-T1-01 IBM MPIO FC 2107 hdisk26 Available 12-T1-01 IBM MPIO FC 2107 hdisk27 Available 12-T1-01 IBM MPIO FC 2107 hdisk28 Available 12-T1-01 IBM MPIO FC 2107 hdisk29 Available 12-T1-01 IBM MPIO FC 2107 hdisk30 Available 12-T1-01 IBM MPIO FC 2107 hdisk31 Available 12-T1-01 IBM MPIO FC 2107 hdisk32 Available 12-T1-01 IBM MPIO FC 2107 hdisk33 Available 12-T1-01 IBM MPIO FC 2107 hdisk34 Available 12-T1-01 IBM MPIO FC 2107 hdisk35 Available 12-T1-01 IBM MPIO FC 2107 hdisk36 Available 12-T1-01 IBM MPIO FC 2107 hdisk37 Available 12-T1-01 IBM MPIO FC 2107






hdisk38 Available 12-T1-01 IBM MPIO FC 2107 hdisk39 Available 12-T1-01 IBM MPIO FC 2107 hdisk40 Available 12-T1-01 IBM MPIO FC 2107 hdisk41 Available 12-T1-01 IBM MPIO FC 2107 hdisk42 Available 12-T1-01 IBM MPIO FC 2107 hdisk43 Available 12-T1-01 IBM MPIO FC 2107 hdisk44 Available 12-T1-01 IBM MPIO FC 2107 hdisk45 Available 12-T1-01 IBM MPIO FC 2107 hdisk46 Available 12-T1-01 IBM MPIO FC 2107 hdisk47 Available 12-T1-01 IBM MPIO FC 2107

================================================================================ COMMAND: lsvg ================================================================================ rootvg VGCL_PM6redo VGCL_PM6log VGCL_HB_D3 VGCL_HB_D2 FS01vg VGCL_PM6dat1 VGCL_PM6dat2 VGCL_PM6dat3

================================================================================ COMMAND: lspv ================================================================================ hdisk0 00c6e0c4aa80463f rootvg active hdisk1 00c6e0d4c56889a7 VGCL_HB_D2 hdisk2 00c6e0d4c5688a8d VGCL_PM6log competitor hdisk3 00c6e0d4c5688bae VGCL_PM6log competitor hdisk4 00c6e0d4c5688caf VGCL_HB_D3 hdisk5 00c6e0c4ee73e0ac FS01vg active hdisk6 00c6e0d4ee533cc6 VGCL_PM6log competitor hdisk7 00c6e0d4ee533d38 VGCL_PM6redo competitor hdisk8 00c6e0d4ee533daa VGCL_PM6dat1 competitor hdisk9 00c6e0d4ee533e1a VGCL_PM6dat1 competitor hdisk10 00c6e0d4ee533e96 VGCL_PM6dat2 competitor hdisk11 00c6e0d4ee533f0b VGCL_PM6dat2 competitor

hdisk12 00c6e0d4ee533f8a VGCL_PM6dat2 competitor hdisk13 00c6e0d4ee533ffe VGCL_PM6dat3 competitor hdisk14 00c6e0d4ee5340a8 VGCL_PM6log competitor hdisk15 00c6e0d4ee53411b VGCL_PM6log competitor hdisk16 00c6e0d4ee53419a VGCL_PM6dat1 competitor hdisk17 00c6e0d4ee53420c VGCL_PM6dat1 competitor hdisk18 00c6e0d4ee534282 VGCL_PM6dat1 competitor hdisk19 00c6e0d4ee534306 VGCL_PM6dat2 competitor hdisk20 00c6e0d4ee534375 VGCL_PM6dat2 competitor hdisk21 00c6e0d4ee5343f2 VGCL_PM6dat3 competitor hdisk22 00c6e0d4ee534473 VGCL_PM6dat3 competitor hdisk23 00c6e0d4ee534564 VGCL_PM6log competitor hdisk24 00c6e0d4ee5345ce VGCL_PM6redo competitor

hdisk25 00c6e0d4ee534639 VGCL_PM6dat1 competitor hdisk26 00c6e0d4ee5346c0 VGCL_PM6dat1 competitor hdisk27 00c6e0d4ee534733 VGCL_PM6dat2 competitor hdisk28 00c6e0d4ee5347a9 VGCL_PM6dat2 competitor






hdisk29 00c6e0d4ee53481e VGCL_PM6dat2 competitor hdisk30 00c6e0d4ee534894 VGCL_PM6dat3 competitor hdisk31 00c6e0d4ee534980 VGCL_PM6log competitor hdisk32 00c6e0d4ee5349f1 VGCL_PM6log competitor hdisk33 00c6e0d4ee534a5d VGCL_PM6dat1 competitor hdisk34 00c6e0d4ee534ad5 VGCL_PM6dat1 competitor hdisk35 00c6e0d4ee534b45 VGCL_PM6dat1 competitor hdisk36 00c6e0d4ee 534bd 4 VGCL_PM6dat2 competitor hdisk37 00c6e0d4ee534c4e VGCL_PM6dat2 competitor hdisk38 00c6e0d4ee534cbb VGCL_PM6dat3 competitor hdisk39 00c6e0d4ee534d2f VGCL_PM6dat3 competitor hdisk40 00c6e0c44df3c266 Nun hdisk41 00c6e0c44df3f640 VGCL_PM6log competitor hdisk42 00c6e0c44df41276 VGCL_PM6log competitor hdisk43 00c6e0c44df4299f Nun hdisk44 00c6e0d496e3dbee VGCL_PM6log competitor hdisk45 00c6e0d496e3fb07 VGCL_PM6log competitor hdisk46 00c6e0d496e41099 VGCL_PM6log competitor hdisk47 00c6e0d496e4291a VGCL_PM6log competitor

================================================================================ COMMAND: df ================================================================================ Filesystem 512-blocks Free %Used Iused %Iused Mounted one /dev/hd4 2883584 2466936 15% 12869 5%/ /dev/hd2 6029312 1463624 76% 44690 21% /usr

/dev/hd9var 2359296 1427800 40% 6137 4% /var /dev/hd3 4456448 3797136 15% 412 1% /tmp /dev/hd11admin 262144 261416 1% 5 1% /admin /proc - - - - - /proc /dev/hd10opt 262144 68440 74% 2046 21% /opt /dev/lvusers 2097152 2095976 1% 32 1% /usersconnect /dev/lvfs01 14024704 13990024 1% 384 1% /FS01 /dev/lvfs80 14024704 14009584 1% 932 1% /FS80

================================================================================ COMMAND: mount ================================================================================

node mounted mounted over vfs dates options

-------- --------------- --------------- ------ ------------ --------------- /dev/hd4/jfs October 2nd, 22 09:17 rw, log=/dev/hd8

/dev/hd2 /usr jfs October 2nd, 22 09:17 rw, log=/dev/hd8 /dev/hd9var /var jfs October 2nd, 22 09:17 rw, log=/dev/hd8

/dev/hd3 /tmp jfs October 2nd, 22 09:17 rw, log=/dev/hd8

/dev/hd11admin /admin jfs October 2nd, 22 09:17 rw, log=/dev/hd8

/proc /proc procfs Oct. 22 09:17 rw

/dev/hd10opt /opt jfs October 2nd, 22 09:17 rw, log=/dev/hd8

/dev/lvusers /usersconnect jfs October 2nd, 22 09:17 rw, log=/dev/hd8



================================================================================ COMMAND: exportfs






================================================================================ exportfs: nothing exported

================================================================================ COMMAND: lsfs ================================================================================ Name Nodename Mount Pt VFS Size Options Accounting Car /dev/hd4 -- /jfs2 2883584 -- yes No /dev/hd2 -- /usr jfs2 6029312 -- yes No /dev/hd9var -- /var jfs2 2359296 -- yes No /dev/hd3 -- /tmp jfs2 4456448 -- yes No /dev/hd11admin -- /admin jfs2 262144 -- yes No /proc -- /proc procfs -- -- yes No /dev/hd10opt -- /opt jfs2 262144 -- yes No /dev/lvusers -- /usersconnect jfs2 2097152 rw yes No /dev/lvfs01 -- /FS01 jfs2 14024704 -- yes No /dev/lvfs80 -- /FS80 jfs2 14024704 -- yes No /dev/pm6lvscan -- /invscan jfs2 -- rw No No /dev/pm6lvint -- /inter jfs2 -- rw No No /dev/pm6lvdveb -- /usr/sap/PM6/DVEBMGS00/work/tri jfs2 -- rw NoNo /dev/pm6lvmirA -- /oracle/PM6/mirrlogA jfs2 -- cio, rw No No /dev/pm6lvmirB -- /oracle/PM6/mirrlogB jfs2 -- cio, rw No No /dev/pm6lvoriB -- /oracle/PM6/origlogB jfs2 -- cio, rw No No /dev/pm6lvoriA -- /oracle/PM6/origlogA jfs2 -- cio, rw No No /dev/pm6lvorastg -- /oracle/stage jfs2 -- rw No No /dev/pm6lvdata1 -- /oracle/PM6/sapdata1 jfs2 -- cio, rw No No /dev/pm6lvdata2 -- /oracle/PM6/sapdata2 jfs2 -- cio, rw No No /dev/pm6lvdata3 -- /oracle/PM6/sapdata3 jfs2 -- cio, rw No No /dev/pm6lvdata4 -- /oracle/PM6/sapdata4 jfs2 -- cio, rw No No /dev/pm6lvdata5 -- /oracle/PM6/sapdata5 jfs2 -- cio, rw No No /dev/pm6lvdata6 -- /oracle/PM6/sapdata6 jfs2 -- cio, rw No No /dev/PM6_lvora -- /oracle jfs2 -- cio, rw No No /dev/lvorapm6 -- /oracle/PM6 jfs2 -- rw No No /dev/pm6lvsapreog -- /oracle/PM6/sapreorg jfs2 -- rw No No /dev/pm6lvmnt -- /sapmnt/PM6 jfs2 -- rw No No /dev/pm6lvmntpool -- /sapmnt/PM6/global/600SPOOL jfs2 -- rw No No /dev/pm6lvusrsap -- /usr/sap jfs2 -- rw No No /dev/pm6lvusap -- /usr/sap/PM6 jfs2 -- rw No No /dev/pm6lvstrans -- /usr/sap/trans jfs2 -- rw No No

/dev/pm6lvadm -- /home/pm6adm jfs2 -- rw No No /dev/pm6lvarching -- /usr/sap/archiving jfs2 -- rw No No /dev/pm6lvcft -- /FS01/logiciel/cft jfs2 -- rw No No /dev/pm6lvdazl -- /FS01/logiciel/hpos jfs2 -- rw No No /dev/pm6lvorarch -- /oracle/PM6/oraarch jfs2 -- rw No No

================================================================================ COMMAND: COM ================================================================================ Fileset Level Action Statuses Dates Time

---------------------------------------------------------------------------- Path: /usr/lib/objrepos

cluster.adt.es.cl ient.include 5.4.0.0 MADE SUPPLEMENTS 9/6/09 10:18: 49







cluster.adt.es.cl ient.samples.clinfo



cluster.adt.es.cl ient.samples.clstat




cluster.adt.es.cl ient.samples.libcl


cluster.adt.es.ja va.demo.monitor



cluster.doc.en_US.es.ht ml


cluster.doc.en_US.es.pd F



cluster.es.cl ient. lib







cluster.es.cl ient.utils




cluster.es.cl ient. wsm 5.4.0.0 MADE SUPPLEMENTS 9/6/09 10:18: 40







cluster.es.cs poc.cmds




cluster.es.cs poc. dsh






cluster.es.pl ugins.dhcp



cluster.es.pl ugins. dns 5.4.0.0 MADE SUPPLEMENTS 9/6/09 11:04: 50





cluster.es.se rver.cfgast










cluster.es.se rver. rte 5.4.0.0 MADE SUPPLEMENTS 9/6/09 11:04: 54







cluster.es.se rver.testtool








cluster.es.wo rksheets 5.4.0.0 MADE SUPPLEMENTS 9/6/09 10:18: 38



cluster.license




Path: /etc/objrepos

cluster.es.cl ient. lib 5.4.0.0 MADE SUPPLEMENTS 9/6/09 10:18: 43






cluster.es.cs poc. rte 5.4.0.0 MADE SUPPLEMENTS 9/6/09 11:04: 53
















Path: /usr/share/lib/objrepos cluster.man.en_US.es.da your



================================================================================ COMMAND: ifconfig en0 ================================================================================ en0: flags=1e080863,480<UP, BROADCAST, NOTRAILERS, RUNNING, SIMPLEX, multicast,GROUPRT, 64BIT, CHECKSUM_OFFLOAD (ACTIVATES), CHAIN>

inet 7.27.224.63 netmask 0xffffff00 broadcast 7.27.224.255

inet 192.168.40.192 netmask 0xffffff00 broadcast 192.168.40.255


================================================================================ COMMAND: ifconfig lo0 ================================================================================ lo0: flags=e08084b<UP, BROADCAST, LOOPBACK, RUNNING, SIMPLEX, multicast,GROUPRT, 64BIT>

inet 127.0.0.1 netmask 0xff000000 broadcast 127.255.255.255 inet6:: 1/0


================================================================================ COMMAND: lsvg - L FS01vg ================================================================================ FS01vg: STANDARD LV NAME LPs PPs special minutes LV STATE MOUNT NOT open logvgfs01 jfs2log 1 1 1/syncd N/A lvfs01 jfs2 214 214 1 open/syncd /FS01 lvfs80 jfs2 214 214 1 open/syncd /FS80

================================================================================ COMMAND: lsvg - L rootvg ================================================================================ rootvg: STANDARD LV NAME LPs PPs special minutes LV STATE MOUNT NOT hd5 bootup 1 1 1 closed/syncd N/A hd6 paging 235 235 1 open/syncd N/A open hd8 jfs2log 1 1 1/syncd N/A hd4 jfs2 11 11 1 open/syncd/ hd2 jfs2 23 23 1 open/syncd /usr hd9var jfs2 9 9 1 open/syncd /var hd3 jfs2 17 17 1 open/syncd /tmp open hd10opt jfs2 1 1 1/syncd /opt open hd11admin jfs2 1 1 1/syncd /admin lg_dumplv sysdump 32 32 1 open/syncd N/A






lvusers jfs2 8 8 1 open/syncd /usersconnect

================================================================================ COMMAND: lslv - L logvgfs01 ================================================================================ logvgfs01: N/A STATEMENT COPIES IN BAND DISTRIBUTION hdisk5 001:000: 000 100% 000:001: 000:000: 000

================================================================================ COMMAND: lslv - L lvfs01 ================================================================================ lvfs01: /FS01



================================================================================ COMMAND: lslv - L hd5

================================================================================ hd5: N/A STATEMENT COPIES IN BAND DISTRIBUTION hdisk0 001:000: 000 100% 001:000: 000:000: 000


================================================================================ COMMAND: lslv - L hd8 ================================================================================ hd8: N/A


================================================================================ COMMAND: lslv - L hd4 ================================================================================ hd4: / STATEMENT COPIES IN BAND DISTRIBUTION hdisk0 011:000: 000 36% 000:000: 004:007: 000

================================================================================ COMMAND: lslv - L hd2






================================================================================ hd2: /usr STATEMENT COPIES IN BAND DISTRIBUTION hdisk0 023:000: 000 100% 000:000: 023:000: 000

================================================================================ COMMAND: lslv - L hd9var ================================================================================ hd9var: /var STATEMENT COPIES IN BAND DISTRIBUTION hdisk0 009:000: 000 100% 000:000: 009:000: 000

================================================================================

COMMAND: lslv - L hd3 ================================================================================ hd3: /tmp STATEMENT COPIES IN BAND DISTRIBUTION hdisk0 017:000: 000 5% 000:000: 001:016: 000

================================================================================ COMMAND: lslv - L hd10opt ================================================================================ hd10opt: /opt STATEMENT COPIES IN BAND DISTRIBUTION hdisk0 001:000: 000 100% 000:000: 001:000: 000

================================================================================ COMMAND: lslv - L hd11admin ================================================================================ hd11admin: /admin STATEMENT COPIES IN BAND DISTRIBUTION hdisk0 001:000: 000 100% 000:000: 001:000: 000

================================================================================ COMMAND: lslv - L lg_dumplv ================================================================================ lg_dumplv: N/A STATEMENT COPIES IN BAND DISTRIBUTION hdisk0 032:000: 000 100% 000:032: 000:000: 000

================================================================================ COMMAND: lslv - L lvusers ================================================================================ lvusers: /usersconnect STATEMENT COPIES IN BAND DISTRIBUTION hdisk0 008:000: 000 100% 000:008: 000:000: 000

================================================================================ COMMAND: odmget HACMPdaemons ================================================================================







daemon = “clstrmgr”

type = “start”

object = “manages”

been worth = “car”

HACMPdaemons:

nodename = “gtyxsappm6p2”

daemon = “clstrmgr” type = “start”




daemon = “clinfo”

type = “start”

object = “time”




type = “stop” object = “time”

been worth = “now”



type = “stop”





type = “stop”

object = “mode”

been worth = “graceful”

================================================================================ COMMAND: odmget HACMPsp2 ================================================================================





END OF DOCUMENT

Documents

CLUSTER - AIX - Installation de HACMP_eng