Rémy Hébert

[email protected] • 1-800-268-3508 • ISO 9001 CERTIFIED

ARI Air Release Valves ■ High air discharge air release valve ■ Patented conical body design ■ Threaded and flanged ends ■ Combination air/vacuum ■ Kinetic/automatic air release ■ 1” to 8”

BLAC Inc. Hydraulic Power and Control Units (HPUs/HCUs) ■ Hydraulic actuation for performance, efficiency, and control

■ Extensive upgrading capabilities for existing systems ■ Customized to suit any application ■ Available in remote mounting configuration or direct-to-drive cylinder assembly

Boehmer District Heating Ball Valves ■ Fully welded design ■ Forged steel material with full penetration weld construction

■ Full or reduced port ■ 2” to 48” ■ ASME 150 class

Boehmer Fully Welded Ball Valves ■ Pipeline ball valve, double block and bleed ■ Natural gas transmission/distribution ■ Oil and gas ■ Emergency sealant injection, PMSS sealing system ■ 2” to 56” ■ ASME 150 to 2500 class

Conval Camseal Ball Valves ■ Metal seated, unibody construction ■ Zero leakage ■ Top entry pressure seal ■ In-line renewable in minutes with cartridge assembly ■ ½” to 4” ■ Up to ASME 4500 class

Conval Clampseal™ Globe Valves ■ Available in angle, Y, or T pattern ■ Pressure-assisted seal bonnet ■ In-line repairable ■ ½” to 4” ■ Up to ASME 4500 class

Conval Cryogenic Valves ■ Single-piece stainless steel gland ■ Forged stainless steel body ■ Solid Stellite seat and disc ■ In-line repairable ■ ½” to 4” ■ ASME 1500 and 2500 class

Conval Throttling Valves ■ Easy-to-read position indicator ■ Pressure-assisted seal bonnet ■ Replaceable seat/venturi ■ Available in tandem configuration ■ ½” to 4” ■ Up to ASME 2500 class


RÉMY HÉBERT1-800-268-3508 x172

[email protected]

QUEBEC & LABRADOR LINECARD


INDUSTRY | GeneralNot all products are available in every territory. Please consult your area sales representative for more information.

Dragon 2Y Needle Valves ■ High-pressure/temperature ■ Carbon and 316 stainless steel ■ Metal-to-metal seat (stellite seat available) ■ ¼”, ?”, ½” ■ ASME 2500 class; up to 1125°F

Fossil Power Systems

Aquarian Electronic Level Indicators ■ No moving parts ■ Solid state electronics & two-colour display ■ NEMA 4x enclosure ■ Swaged style high pressure brazed probe ■ Various electronic models available to support 1 through 48 probe levels

■ Probe rating 3000 psi @ 1200°F


Aquarian Visual Gauges ■ Bi-coloured ported gauge with LED illuminator ■ No hot retorquing necessary ■ Double mica provides extended port life ■ Fulfills ASME Boiler & Pressure Code 1 PG-60 ■ Flat glass and reflex gauges for lower pressure ■ Up to 3000 psi


HORA Attemperators/Desuperheaters ■ Types: Multi-nozzle spray (standard and cooled); Steam atomized; Venturi

■ Venturi nozzles atomize spray water ■ Integral pressure control ■ Electric and pneumatic actuation ■ ASME 600 to 2500 class

HORA Automatic Pump Recirculation Valves ■ On/off recirculation flow control ■ Minimum flow ■ Ensures pump protection ■ No pneumatic or electrical connections ■ 1¼” to 8”, larger sizes available ■ ASME 150 to 1500 class

HORA Control Valves ■ High and low load designs ■ Water, feedwater and steam ■ Buttweld or flange connection ■ Pneumatic, electric or hydraulic actuation ■ Up to 24” ■ ASME 300 to 2500 class

HORA Gas Control Valves ■ Transmission and storage applications ■ Turbine bypass valves ■ Anti-surge and emergency shutdown for compressors ■ Axial control valves for storage applications ■ Gas pressure let down ■ Up to 20” (DN 500) ■ ASME to 1500 class

Fuel Gas and Liquid Handling Valves ■ Automated and manual ■ CSA 6.5-2000 / ANSI Z21.21 ■ CGA 3.9 M94 ■ Fire safe API 607 ■ FM class 7400 ■ FNPT ½” to 2” Flanged ½” to 6”

■ ASME 150 and 300 class

HORA Steam Conditioning Valves ■ Combined pressure-reducing and desuperheating ■ Globe, angle or z-style ■ Carbon steel, stainless steel and other alloys ■ Buttweld or flanged ends ■ Up to ASME 1500 class

HORA Turbine Bypass Systems ■ Custom engineered ■ 100% of capacity of turbine ■ High/intermediate/low pressure designs

General | INDUSTRY Not all products are available in every territory. Please consult your area sales representative for more information.


Onyx Duck Bill Check Valves ■ Exterior mount or internal installation ■ Flanged or slip-on connection ■ Open and enclosed designs ■ NSF approved ■ 1” to 60”

Onyx Expansion Joints ■ Prevents pipe displacement/stress and reduces noise and vibration

■ Customizable to suit the application ■ Single or multiple arch ■ Standard design ships from stock

Onyx Pinch Valves ■ Full round ■ Single pinch ■ Pre-pinched ■ Manual, electric, or pneumatic actuator ■ On/off and modulating service ■ ½” to 36”

Onyx Pressure Sensors ■ Modular seals for in-line maintenance ■ Up to 3 instruments per ring ■ Combinations to suit the application ■ Guaranteed to never clog or plug ■ Flanged, screw-on, tri-clover connections ■ Available with gauges, pressure switches, and transmitters

■ 1” to 42”

Persta High Pressure Forged Valves ■ Gate, globe, check and line blinds ■ Forged steel and alloy materials ■ ½” and larger ■ ASME 900 to 4500 class

SchuF Changeover Valves ■ Tandem changeover valve design ■ Carbon steel and alloy materials ■ 1” to 14” ■ Up to ASME 2500 class

SchuF Disc Bottom Outlet Valves ■ Metal-to-metal positive shutoff ■ PTFE disc and seat optional ■ Disc lowering or rising design ■ Dead space free and crust breaking ■ 1” to 24” ■ Up to ASME 2500 class

SchuF Diverter Valves ■ 3,4,5 and multiple inlets and outlets ■ Metal-to-metal seated ■ Contoured ram, heating jacket, flushing ports optional ■ Diverse body designs ■ Dead space free ■ 1” to 18” ■ Up to ASME 2500 class

SchuF Liftplug Valves ■ Ideal for high temp. and highly abrasive, clogging applications

■ IsoPlug design: isolates media flow ■ SwitchPlug design: switches between 3 inlets ■ TruEPlug design: double block and bleed in one enclosed body

■ Materials CS and C12A (to 36”) ■ Up to ASME 2500 class

SchuF Ram Bottom Outlet Valves ■ Metal-to-metal positive shutoff ■ Self-draining and dead space free at inlet ■ Special body/trim materials: titanium, Hastelloy, duplex stainless steel

■ Multistage and cage release design for pressure letdown optional

■ 1” to 24” ■ Up to ASME 2500 class

INDUSTRY | GeneralNot all products are available in every territory. Please consult your area sales representative for more information.


SchuF Sampling Valves ■ Metal-to-metal or PTFE positive shutoff ■ Non-clogging/dead space free ■ Ram and disc type ■ PTFE or graphite packing ■ Wafer and integral pipe design ■ Bottle systems available ■ ½” to 1½” ■ Up to ASME 600 class

SchuF Severe Service Angle Control Valves ■ Custom designs ■ Cast or forged ■ Special body/trim material: titanium; Hastelloy; Inconel; tungsten carbide; ceramic

■ 1” to 36” ■ Up to ASME 2500 class

SchuF Tank Emergency Shut-Off Valves ■ Designed for storage tanks, as required by API 625 ■ Engineered to shut off on loss of power, or valve damage

■ Available in disc, bottom outlet, lift plug

SchuF/Fetterolf Cam-Set, Cam-Slide, Cam-Goggle, Stacey Line Blinds

■ Positive isolation; fast changeover ■ No flange separation required for Cam-Set/Slide/Goggle

■ Buttweld and flanged ends ■ Carbon and stainless steel ■ Up to 60”, largers sizes upon request ■ ASME 150 to 1500 class; higher upon request

Somas Ball Segment Valves ■ Control and on/off ■ Stainless steel and exotic alloys ■ Metal and soft seated ■ 1” to 10” standard, up to 28” ■ ASME 150 to 600 class

Somas Butterfly Valves ■ High-performance, triple offset ■ Stainless steel and exotic alloys ■ Isolation and control ■ Metal and soft seated ■ Inherently fire safe ■ 3” to 48” ■ ASME 150 to 600 class

Stafsjo HG Knife Gate Valves ■ Bidirectional operation ■ Through-going gate ■ High pulp stock consistency ■ Mounts between ANSI 125/150 flanges ■ 3” to 32”

Stafsjo MV Knife Gate Valves ■ One-piece body design (up to 24”) ■ Suited for a wide range of applications ■ Modular design, easy to maintain ■ Metal and soft seats ■ 2” to 40” in stainless steel or ductile iron

Stafsjo RKO Knife Gate Valves ■ Round inlet and square outlet ■ Suited for extreme process conditions ■ Design minimizes clogging/choking ■ High density cleaner valves ■ Scavenger dump valves ■ Cast iron and stainless steel ■ 4” to 24”

Stafsjo SLV/F/H/X Knife Gate Valves ■ Slurry and abrasive applications ■ Bidirectional ■ Full bore for max flow capacity ■ One- or two-piece body design ■ 2” to 48” ■ V: fully lugged (MWP 150 psig) F: fully flanged (MWP 150 psig) H: high pressure (MWP 290 psig) X: higher pressure (MWP 720 psig)

General | INDUSTRY Not all products are available in every territory. Please consult your area sales representative for more information.


Stafsjo TVE Knife Gate Valves ■ Transmitter and instrument isolation ■ All stainless steel construction ■ All stainless steel ratchet mechanism ■ Special tank connection flange ■ 3” ANSI 150 Class

Stafsjo WB14 Knife Gate Valves ■ Dual seated, fully lugged, non-rising stem ■ Bidirectional, for dead end service ■ Ductile iron and stainless steel body options ■ One- or two-piece body design ■ 2” to 48”

Stainless Valve Co. O-Port Slide Gate Valves ■ The “flat” ball valve ■ Tight shutoff in severe applications ■ Complete custom design to application ■ Slurry applications ■ ASME 150 to 900 class

Xanik High-Pressure Cast Valves ■ Gate, globe, T and Y, stop check, tilting disc check ■ Bolted bonnet and pressure seal ■ Steam, high-pressure water, gases and liquids ■ HF alkylation service ■ 1/2” to 36” ■ ASME 600 to 4500 class

ZWICK Triple Offset (TOV) Butterfly Valves ■ Metal-to-metal seat ■ Bidirectional ■ Double block and bleed ■ Tilting disc check valve ■ Fully lugged, butt weld, and gate valve face-to-face ■ Fire safe BS 6755 and API 607 ■ 2” to 88” (DN 50-2200) ■ ASME 150 to 900 class

Head Office126 Milner AvenueToronto, ON M1S 3R2tel 416-299-0780fax 416-299-0394

[email protected]

1-800-268-3508

Actuation Solutions and ServicesFrom sizing and selection to adaption and mounting, we provide a single source for complete valve assemblies for your most demanding valve applications. We have experience mounting the following brands of actuators:

Assembly and Function TestingOur technicians are factory-trained by our manufacturers and are available to perform routine maintenance and repair of Armour Valve supplied assemblies either at our warehouse or on-site at your facility.

In-house and On-site Service and RepairWe mount and stroke test all completed valve assemblies to ensure proper function and that required stroke times are met. Inspection reports are available upon request.

SERVICES

Western RegionOffice/Stocking Warehouse6, 2221-41 Avenue NECalgary, AB T2E 6P2tel 403-229-3171fax 403-245-9297

Sales RepresentativesAtlantic CanadaQuebec & LabradorOntario West/EastSaskatchewan Alberta South/CentralFort McMurrayBritish Columbia

Ext131172133/134156162/168131137


For service, contact your local sales representative or [email protected]

Documents

Rémy Hébert