Delta DIN Rail Power Supplies - Ferret.com.au · 23 DRP048V480W1BN AC-DC DIN RAIL 48 VOLT 480 WATTS 24 DRB-24V020AB BUFFER MODULE DIN RAIL 20 AMP 26 DRR20, DRR40 REDUNDANCY MODULES

1

Delta DIN Rail Power Supplies

2

3

4 Introduction Delta Cliq and Cliq II Series

5 DRC-12V10W1AZ AC-DC DIN RAIL 12 VOLT 10 WATTS







12 DRP012V015W1AZ AC-DC DIN RAIL 12 VOLT 15 WATTS



15 DRP012V100W1AA AC-DC DIN RAIL 12 VOLT 100 WATTS

16 DRP024V060W1BN AC-DC DIN RAIL 24 VOLT 60 WATTS








24 DRB-24V020AB BUFFER MODULE DIN RAIL 20 AMP

26 DRR20, DRR40 REDUNDANCY MODULES DIN RAIL 20A & 40A

28 DRU24V40ABN DC-UPS MODULE DIN RAIL 20V 40A

30 DRP024V0603BN AC-DC DIN RAIL 24 VOLT 60 WATTS 3 PhASE





Contents

4

The CliQ and CliQ II series DIN Rail Power Supply are the latest offerings from one of the world’s largest leading power supply manufacturers and solution providers –Delta. The state-of-the-art design is made to withstand harsh industrial environments. The rugged, compact metal case and plastic case are both shock and vibration resistant according to IEC60068-2.

The CliQ and CliQ II series of products provide overvoltage, overload and over temperature protections. Using a wide input voltage range design, the power supplies are usable worldwide.

The built in Power Boost feature is the reserve power available constantly that allows reliable startup of loads with high inrush current.

Highlights• Fast wiring and easy installation• Compact design for easy handling• Power Boost 150%: for 3 seconds (CliQ) for 5

seconds (CliQ II)• Overload, overvoltage, and over temperature

protections• Vibration IEC60068-2-6• Cooling: Convection• RoHS Compliant• With Conformal Coating (Class 1 Div. 2 Ready)• Expected life time: 10 years

Typical Applications• General engine constructions• Apparatus constructions• Building equipments• Packing equipments• Wood-working machines• Sheet-fabricating machines• Automotive engineering• Test & Measurement• Environmental engineering• Construction machines• Automation process

The products in the CliQ and CliQ II Series come with conformal coating as standard, making them suitable for applications where dust, moisture, hazardous chemical particles and condensation are prevalent.

Redundancy SolutionThe Redundancy Solution ensures zero system down time for the customer when one of the power supply fails or is being disconnected unexpectedly. Under normal circumstances, both power supplies are each operating at approximately 50% load. When one fails, the other automatically takes over, thus providing 100% load and ensures that the system continues running.

The fault relay function alerts the user of any failure through potential free contacts. The LED lights on the Redundancy Modules (see page 24) also indicate the health of each individual power supply.

IntroductionDELTA CLIQ AND CLIQ II SERIES

5

Delta DRC-12V10W1AZAC-DC DIN RAIL 12 VOLT 10 WATTS

Features

• Protection Class II, Double Isolation (No Earth connection is required)

• Universal AC input voltage and full power up to 55°C• Power will not de-rate for the entire input voltage range• Efficiency > 82.0% @ 115Vac & 230Vac• NEC Class 2 / Limited Power Source (LPS) certified• Overvoltage / Overcurrent / Over Temperature Protections

MECHANICAL

Dimensions (LxWxH)

91 x 18 x 55.6mm

Case Cover Plastic

Weight 0.06kg

Indicator Green LED (DC OK)

Cooling System Convection

Input Terminal M4 x 2 Pins (Rated 300V/16A)

Output Terminal M4 x 2 Pins (Rated 300V/16A)

Input/Output Wire AWG 26-12

Mounting Rail Standard TS35 DIN Rail in accordance with EN 60715

STANDARDS & APPROVALS

Safety TUV Bauart to EN 60950-1, UL/cUL recognized to UL 60950-1 and CSA C22.2 No. 60950-1, CB scheme to IEC 60950-1, Limited Power Source (LPS)

Industrial Control Equipment

UL/cUL listed to UL 508 and CSA C22.2 No. 107.1-01

Class 2 Power Supply

UL/cUL recognized to UL 60950-1, CSA C22.2 No. 60950-1

CE In conformance with EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC

Materials & Parts RoHS Directive 2011/65/EU Compliant

Galvanic Isolation 3.0KVAC

ENVIRONMENTAL

Operating Temp -25°C to +71°C

Power De-rating > 55°C de-rate power by 2.5% / °C

Humidity 5–95%RH (Non condensing)

Altitude 0–2,000m

SpecificationsINPUT

Voltage 90–264VAC 125-375 VDC

Current < 0.30A@115VAC, < 0.20A @ 230VAC

Frequency 47-63Hz

Efficiency at 100% load > 82.0% @ 115VAC & 230VAC

Max. Inrush current < 15A @ 115VAC, < 30A @ 230VAC

Leakage current < 0.25mA @ 240VAC

OUTPUT

Voltage 12V

Current 0.83A

Power 10W

Line regulation < 1% typ. (@ 90-264VAC, 100% load)

Load regulation < 2% typ. (@ 90-264VAC, 100% load)

Residual Ripple / PARD (20MHz)

< 50mVpp /150mVpp

Rise Time < 100ms @ nominal input (100% load)

Start-up Time < 3,000ms @ nominal input (100% load)

Hold-up Time > 10ms @ 115VAC > 30ms @ 230VAC (100% load)

Dynamic Response (Overshoot & Undershoot O/P Voltage)

± 5% @ 10-100% load

Start-up with Capacitive Loads

3,000μF Max.

6


Features

• Protection Class II, Double Isolation (no earth connection required)

• Universal AC input voltage and full power up to 55°C• Efficiency > 85.0% @ 115VAC & 230VAC• NEC Class 2 / Limited Power Source (LPS) certified• Overvoltage/Overcurrent/Over Temperature Protections• International safety approvals to ITE and Industrial standards

MECHANICAL

Dimensions (LxWxH)

91 x 53 x 55.6mm

Case Cover Plastic

Weight 0.14kg



Input Terminal 2 Pins (Rated 300V/25A)

Output Terminal 4 Pins (Rated 300V/25A)




Safety TUV Bauart to EN 60950-1, UL/cUL recognised to UL 60950-1, CSA C22.2 No. 60950-1, CB scheme to IEC 60950-1, Limited Power Source (LPS)








ENVIRONMENTAL




Altitude 0–2,000m

SpecificationsINPUT

Voltage 90–264VAC 125–375VDC


Frequency 47-63Hz


Power Factor Conforms to EN61000-3-2



OUTPUT

Voltage 12V

Output Voltage Range 11.5–14.5VDC

Current 2.1A

Power 30W

Line regulation < 1% typ. (@ 90-264VAC 100% load)


PARD (20MHz) 150mVpp



Hold-up Time > 25ms @ 115VAC, > 30ms @ 230VAC (100% load)


± 5% @ 10-100% load


3,000μF Max.

7


Features

• Protection Class II, Double Isolation (No earth connection required)

• Universal AC input voltage and full power up to 55°C• Efficiency > 85.0% @ 115Vac & 230VAC• NEC Class 2/Limited Power Source (LPS) certified• Overvoltage/Overcurrent/Over Temperature Protections• International safety approvals to ITE and Industrial standard

MECHANICAL

Dimensions (LxWxH)

91 x 71 x 55.6mm

Case Cover Plastic

Weight 0.22kg








Safety TUV Bauart to EN 60950-1, UL/cUL recognized to UL 60950-1 and CSA C22.2 No. 60950-1, CB scheme to IEC 60950-1, Limited Power Source (LPS)






ENVIRONMENTAL




Altitude 0–2,000m

SpecificationsINPUT



Frequency 47–63Hz

Efficiency at 100% load > 85.0% @ 115VAC & > 87.0% 230VAC



OUTPUT

Voltage 12V

Voltage range 11.5–14.0V

Current 4.50A

Power 54W



PARD (20MHz) < 150mVpp





± 5% @ 10-100% load


3,000μF Max.

8


Features

• Protection Class II, Double Isolation (no earth connection required)

• Universal AC input voltage and full power up to 55°C• Efficiency > 80.0% @ 115VAC & 230VAC• NEC Class 2 / Limited Power Source (LPS) certified• Overvoltage/Overcurrent/Over Temperature Protections• International safety approvals to ITE and Industrial standards

MECHANICAL

Dimensions (LxWxH)

91 x 18 x 55.6mm

Case Cover Plastic

Weight 0.065kg








Safety TUV Bauart to EN 60950-1, UL/cUL recognised to UL 60950-1, CSA C22.2 No. 60950-1, CB scheme to IEC 60950-1, Limited Power Source (LPS)






ENVIRONMENTAL




Altitude 0–2,000m

SpecificationsINPUT




Frequency 47-63Hz




OUTPUT

Voltage 24V

Current 0.42A

Power 10W








± 5% @ 10-100% load


3,000μF Max.

9

Delta DRC-24V30W1AZAC-DC DIN RAIL 30 WATTS

Features


• Universal AC input voltage and full power up to 55°C• Power will not de-rate for the entire input voltage range• Efficiency > 87.0% @ 115VAC & 230VDC• NEC Class 2 / Limited Power Source (LPS) certified• Overvoltage / Overcurrent / Over Temperature Protections

MECHANICAL

Dimensions (LxWxH)

91 x 53 x 55.6mm

Case Cover Plastic

Weight 0.14kg








Safety TUV Bauart to EN 60950-1, UL/cUL recognized to UL 60950-1, CSA C22.2 No. 60950-1, CB scheme to IEC 60950-1, Limited Power Source (LPS)








ENVIRONMENTAL




Altitude 0–2,000m

SpecificationsINPUT


Current < 0.80A@115Vac, < 0.60A @ 230VAC

Frequency 47-63Hz




OUTPUT

Voltage 24V

Output Voltage Range 23.52-24.48VDC

Current 1.25A

Power 30W








± 5% @ 10-100% load


3,000μF Max.

10


Features


• Universal AC input voltage and full power up to 55°C• Power will not de-rate for the entire input voltage range• Efficiency > 88.0% @ 115VAC & 230VDC• NEC Class 2 / Limited Power Source (LPS) certified• Overvoltage / Overcurrent / Over Temperature Protections

MECHANICAL

Dimensions (LxWxH)

91 x 71 x 55.6mm

Case Cover Plastic

Weight 0.24kg








Safety TUV to EN 60950-1, UL/cUL recognized to UL 60950-1, CSA C22.2 No. 60950-1, CB scheme to IEC 60950-1, Limited Power Source (LPS)








ENVIRONMENTAL




Altitude 0–2,000m

SpecificationsINPUT



Frequency 47-63Hz




OUTPUT

Voltage 24V

Output Voltage Range 24–28VDC

Current 2.50A

Power 60W








± 5% @ 10-100% load


3,000μF Max.

11


Features

• Protection Class II, Double Isolation (No earth connection required)

• Universal AC input voltage and full power up to 55°C• Efficiency > 87.0% @ 115VAC, > 89.0% 230VAC• NEC Class 2/Limited Power Source (LPS) certified• Overvoltage/Overcurrent/Over Temperature Protections• International safety approvals to ITE and Industrial standard

MECHANICAL

Dimensions (LxWxH)

91 x 89.9 x 55.6mm

Case Cover Plastic

Weight 0.33kg





Input/Output Wire AWG 22-12 (x1), AWG 24-12 (x2)



Safety TUV Bauart to EN 60950-1, UL/cUL recognised to UL60950-1 and CSA C22.2 No. 60950-1, CB scheme to IEC 60950-1, Limited Power Source (LPS)






ENVIRONMENTAL




Altitude 0–2,000m

SpecificationsINPUT



Frequency 47–63Hz

Efficiency at 100% load > 87.0% @ 115VAC > 89.0% @ 230VAC



OUTPUT

Voltage 24V

Voltage range 20–24.48V

Current 3.80A

Power 91W








± 5% @ 10-100% load


3,000μF Max.

12

Delta DRP012V015W1AZAC-DC DIN RAIL 12 VOLT 15 WATTS

Features

• Universal AC input voltage without power de-rating• Power Boost of 150% for 3 seconds• Reliable design, expected life of 10 years• Conforms to harmonic current IEC/EN 61000-3-2, Class A• Multiple wire connections to terminals allowed• Conformal coating on PCBA to protect against chemical

and dust pollutants• Hazardous Locations approval to ATEX and Class I, Div 2

MECHANICAL

Dimensions (LxWxH)

100 x 32 x 100.6mm

Case Cover Plastic

Weight 0.18kg


Input Terminal M3.5 x 5 Pins (Rated 300V/15A)

Output Terminal M3.5 x 5 Pins (Rated 300V/15A)


MTBF2 > 500,000 hrs

ENVIRONMENTAL


Power De-rating > 50°C de-rate power by 2.5% / °C > 70°C de-rate power by 4% / °C

Humidity < 95%RH (Non condensing)

Altitude 0–2,000m

SpecificationsINPUT



Frequency 47-63Hz

Efficiency1 at 100% load > 84.0% @ 115VAC > 83.0% @ 230VAC



Leakage current < 1mA @ 240VAC

OUTPUT

Voltage 12V

Output Voltage Range 11–14V

Current 1.25A

Power 15W

Line regulation < 0.5% typ. (@ 85-264VAC, 100% load)

Load regulation < 1% typ. (@ 85-264VAC, 0–100% load)


Hold-up Time > 22ms @ 115VAC > 110ms @ 230VAC

NOTES: 1) Efficiency: O/P 100% load, Ta: 25°C at Vertical Mounting Orientation 2) MTBF as per Telcordia SR-332 (Confidential level: 90%, I/P: 115Vac,O/P: 100% load) at Vertical Mounting Orientation 3) All parameters are specified at 25°C ambient unless otherwise noted


Electronic Equipment in Power Installations

EN50718 / IEC62103

Electrical Safety TUV Bauart to EN60950-1, UL/cUL recognised to UL60950-1, CSA C22.2 No. 60950-1, CB scheme to IEC60950-1



Hazardous Location / ATEX

(For DRP012V015W1AY) cCSAus to CSA C22.2 No.213-M1987, ANSI / ISA 12.12.01:2007 Class I, Division 2, Group A,B,C,D T4 EN60079-0:2009, EN60079-15:2010 (Ex II 3GII 3G Ex nA IIC T4 Gc)

CE In conformance with EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC For DRP012V015W1AY: In conformance with Equipment for explosive atmospheres (ATEX) directive 94/9/EC


Galvanic Isolation Input to Output: 4.0KVAC Input to Ground: 1.5KVAC Output to Ground: 1.5KVAC

13

Delta DRP012V030W1AZAC-DC DIN RAIL 12 VOLT 30 WATTS

Features

• Universal AC input voltage without power de-rating• Power Boost of 150% for 3 seconds• Reliable design, expected life of 10 years• Conforms to harmonic current IEC/EN 61000-3-2, Class A• Multiple wire connections to terminals allowed• Conformal coating on PCBA to protect against chemical


MECHANICAL

Dimensions (LxWxH)

100 x 32 x 100.6mm

Case Cover Plastic

Weight 0.20kg


Input Terminal M3.5 x 5 Pins (Rated 300V/15A)

Output Terminal M3.5 x 5 Pins (Rated 300V/15A)


MTBF2 > 500,000 hrs

ENVIRONMENTAL




Altitude 0–3,000m

SpecificationsINPUT



Frequency 47-63Hz

Efficiency1 at 100% load > 85.0% @ 115VAC & 230VAC




OUTPUT

Voltage 12V


Current 2.50A

Power 30W








EN50718 / IEC62103





(For DRP012V030W1AY) cCSAus to CSA C22.2 No.213-M1987, ANSI / ISA 12.12.01:2007 Class I, Division 2, Group A,B,C,D T4 EN60079-0:2009, EN60079-15:2010 (Ex II 3GII 3G Ex nA IIC T4 Gc)

CE In conformance with EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC For DRP012V030W1AY: In conformance with Equipment for explosive atmospheres (ATEX) directive 94/9/EC



14

Delta DRP012V060W1AAAC-DC DIN RAIL 12 VOLT 60 WATTS

Features

• Universal AC input voltage without power de-rating• Power Boost of 150% for 3 seconds• Full corrosion resistant Aluminium chassis• Conforms to harmonic current IEC/EN 61000-3-2, Class A• Multiple wire connections to terminals allowed• Conformal coating on PCBA to protect against chemical


MECHANICAL

Dimensions (LxWxH)

121 x 32 x 120mm

Case Cover Aluminium

Weight 0.33kg





MTBF2 > 500,000 hrs

ENVIRONMENTAL




Altitude 0–3,000m

SpecificationsINPUT



Frequency 47–63Hz





OUTPUT

Voltage 12V


Current 5.00A

Power 60W








EN50718 / IEC62103




Ex II 3G ATEX 97/9/EC

Certificate No. EPS 12 ATEX 1 491 X


cCSAus to CSA C22.2 No.213-M1987, ANSI / ISA 12.12.01:2007 Class I, Division 2, Group A,B,C,D T4, EN60079-0:2009, EN60079-15:2010 (Ex II 3GII 3G Ex nA IIC T4 Gc)

CE In conformance with EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC In conformance with Equipment for explosive atmospheres (ATEX) directive 94/9/EC



15

Delta DRP012V100W1AAAC-DC DIN RAIL 12 VOLT 100 WATTS

Features

• Universal AC input voltage without power de-rating• Power Boost of 150% for 3 seconds• Full corrosion resistant Aluminium chassis• Conforms to harmonic current IEC/EN 61000-3-2, Class A• Multiple wire connections to terminals allowed• Conformal coating on PCBA to protect against chemical


MECHANICAL

Dimensions (LxWxH)

121 x 50 x 118.7mm


Weight 0.64kg





MTBF2 > 500,000 hrs

ENVIRONMENTAL




Altitude 0–3,000m

SpecificationsINPUT



Frequency 47–63Hz



Max. Inrush current < 100A @ 115VAC, No damage @ 230VAC


OUTPUT

Voltage 12V


Current 8.33A

Power 100W








EN50718 / IEC62103




ExII 3G ATEX 97/9/EC



cCSAus to CSA C22.2 No.213-M1987, ANSI / ISA 12.12.01:2007 Class I, Division 2, Group A,B,C,D T4 EN60079-0:2009, EN60079-15:2010 (Ex II 3GII 3G Ex nA IIC T4 Gc)

CE In conformance with EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC In conformance with Equipment for explosive atmospheres (ATEX) directive 94/9/EC



16

Delta DRP024V060W1BNAC-DC DIN RAIL 24 VOLT 60 WATTS

Features

• Universal AC input voltage without power de-rating• High efficiency > 90.0% @ 230VAC• Power Boost of 150% for 5 seconds• Full corrosion resistant Aluminium chassis• Conforms to harmonic current IEC/EN 61000-3-2, Class A• IP20 compliant, pluggable AC and DC terminal blocks• Conformal coating on PCBA to protect against chemical

and dust pollutants

MECHANICAL

Dimensions (LxWxH)

120.6 x 32 x 119.3mm


Weight 0.33kg


Input Terminal Pluggable connector 3 Pins (Rated 300V/30A)

Output Terminal Pluggable connector 2 Pins (Rated 300V/30A)


MTBF2 > 800,000 hrs

ENVIRONMENTAL




Altitude 0–2,500m

SpecificationsINPUT



Frequency 47–63Hz

Efficiency1 at 100% load > 90% @ 115VAC & 230VAC


Max. Inrush current < 20A @ 115VAC, 35A @ 230VAC


OUTPUT

Voltage 24V


Current 2.50A

Power 60W





NOTES: 1) Efficiency: O/P 100% load, Ta: 25°C at Vertical Mounting Orientation 2) MTBF as per Telcordia SR-332 (Confidential level: 90%, I/P: 115VAC,O/P: 100% load) at Vertical Mounting Orientation 3) All parameters are specified at 25°C ambient unless otherwise noted



EN50718 / IEC62103

Electrical Safety SIQ to EN60950-1, UL/cUL recognized to UL60950-1, CSA C22.2 No. 60950-1, CB scheme to IEC60950-1


UL/cUL listed to UL508 and CSA C22.2 No. 107.1-01, CSA to CSA C22.2 No. 107.1-01 (File No. 181564)

Ex II 3G ATEX 97/9/EC IECEX Test Report

(For DRP024V060W1BA) Certificate No. ESP 12 ATEX 1 491 X; For IEC60079-0, IEC60079-15

Hazardous Location / ATEX (For DRP024V060W1BA)

CSA to CSA C22.2 No. 213-M1987, ANSI / ISA, 12.12.01:2007 (Class I, Division 2, Group A, B, C, D, T4 EN60079-0:2009, EN60079-15:2010 (Ex II 3G Ex nA nC IIc T4 Gc)

CE In conformance with EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC For DRP024V060W1BA: In conformance with Equipment for explosive atmospheres (ATEX) directive 94/9/EC



17


Features

• Universal AC input voltage without power de-rating• High efficiency > 90.0% @ 230VAC• Power Boost of 150% for 5 seconds • Full corrosion resistant Aluminium chassis• IP20 compliant, pluggable AC and DC terminal blocks• Conforms to harmonic current IEC/EN 61000-3-2, Class A• Conformal coating on PCBA to protect against chemical

and dust pollutants

MECHANICAL

Dimensions (LxWxH)

121 x 50 x 123.1mm


Weight 0.72kg





MTBF2 > 800,000 hrs

ENVIRONMENTAL




Altitude 0–2,500m

SpecificationsINPUT



Frequency 47–63Hz



Max. Inrush current < 35A @ 115VAC & 230VAC


OUTPUT

Voltage 24V


Current 5.00A

Power 120W








EN50718 / IEC62103







18


Features

• Universal AC input voltage without power de-rating• High efficiency > 92.0% @ 230VAC• Power Boost of 150% for 5 seconds • IP20 compliant, pluggable AC and DC terminal blocks• Conforms to harmonic current IEC/EN 61000-3-2, Class A• Extreme low temperature cold start at -40°C• Conformal coating on PCBA to protect against chemical

and dust pollutants

MECHANICAL

Dimensions (LxWxH)

121 x 85 x 124.1mm


Weight 1.10kg





MTBF2 > 500,000 hrs

ENVIRONMENTAL




Altitude 0–2,500m

SpecificationsINPUT



Frequency 47–63Hz


Power Factor > 0.96 @ 115VAC > 0.90 230VAC



OUTPUT

Voltage 24V


Current 10.00A

Power 240W




Hold-up Time > 20ms @ 115VAC & 230VAC




EN50718 / IEC62103







19


Features

• Universal AC input voltage without power de-rating• High efficiency > 90.0% @ 230VAC• Power Boost of 150% for 5 seconds (480W: 200% for 2

seconds)• Full corrosion resistant Aluminium chassis• Conforms to harmonic current IEC/EN 61000-3-2, Class A• Extreme low temperature cold start at -40°C• Conformal coating on PCBA to protect against chemical

and dust pollutants

MECHANICAL

Dimensions (LxWxH)

121 x 144 x 118.6mm


Weight 1.37kg




Input/Output Wire I/P: AWG 18-10 O/P: AWG 18-10

MTBF2 > 500,000 hrs

ENVIRONMENTAL




Altitude 0–2,500m

SpecificationsINPUT



Frequency 47–63Hz


Power Factor > 0.96 @ 115VAC > 0.89 230VAC



OUTPUT

Voltage 24V


Current < 3mA @ 240VAC

Power 480W








EN50718 / IEC62103







20


Features

• Universal AC input voltage without power de-rating• High efficiency > 92.0% @ 230VAC• Power Boost of 150% for 5 seconds (480W: 200% for 2

seconds)• Full corrosion resistant Aluminium chassis• Conforms to harmonic current IEC/EN 61000-3-2, Class A• Extreme low temperature cold start at -40°C• Conformal coating on PCBA to protect against chemical

and dust pollutants

MECHANICAL

Dimensions (LxWxH)

121 x 32 x 125mm


Weight 0.38kg





MTBF2 > 800,000 hrs

ENVIRONMENTAL




Altitude 0–2,500m

SpecificationsINPUT



Frequency 47–63Hz



Max. Inrush current < 20A @ 115VAC < 35A @ 230VAC


OUTPUT

Voltage 48V


Current 1.25A

Power 60W








EN50718 / IEC62103




Ex II 3G ATEX 97/9/EC IECEX

(For DRP048V060W1BA) Certificate No. EPS 12 ATEX 1 491 X


cCSAus to CSA C22.2 No. 213-M1987, ANSI / ISA 12.12.01:2007 [Class I, Division 2, Group A, B, C, D T4, Ta= -25°C to +80°C (> +50°C derating)], EN 60079-0:2009, EN 60079-15:2010 [ II 3G Ex nA nC IIC T4 Gc, Ta= -25°C to +80°C (> +50°C derating)]




21


Features

• Universal AC input voltage without power de-rating• High efficiency > 90.0% @ 230VAC• Power Boost of 150% for 5 seconds• Full corrosion resistant Aluminium chassis• Conforms to harmonic current IEC/EN 61000-3-2, Class A• Conformal coating on PCBA to protect against chemical

and dust pollutants

MECHANICAL

Dimensions (LxWxH)

121 x 50 x 123.1mm


Weight 0.72kg





MTBF2 > 800,000 hrs

ENVIRONMENTAL




Altitude 0–2,500m

SpecificationsINPUT



Frequency 47–63Hz


Power Factor > 0.99 @ 115VAC, > 0.93 @ 230VAC

Max. Inrush current < 35A @ 115VAC < 50A @ 230VAC


OUTPUT

Voltage 48V


Current 2.5A

Power 120W








EN50718 / IEC62103







cCSAus to CSA C22.2 No. 213-M1987, ANSI / ISA 12.12.01:2007 [Class I, Division 2, Group A, B, C, D T4, Ta= -25°C to +80°C (> +50°C derating)], EN 60079-0:2009, EN 60079-15:2010 [Ex II 3G Ex nA nC IIC T4 Gc, Ta= -25°C to +80°C (> +50°C derating)]




22


Features

• Universal AC input voltage without power de-rating• High efficiency > 92% @ 230VAC• Power Boost of 150% for 5 seconds• Full corrosion resistant Aluminium chassis• Conforms to harmonic current IEC/EN 61000-3-2, Class A• Conformal coating on PCBA to protect against chemical

and dust pollutants

MECHANICAL

Dimensions (LxWxH)

121 x 85 x 124.1mm


Weight 0.96kg





MTBF2 > 500,000 hrs

ENVIRONMENTAL




Altitude 0–2,500m

SpecificationsINPUT



Frequency 47–63Hz





OUTPUT

Voltage 48V


Current 5.0A

Power 240W








EN50718 / IEC62103







cCSAus to CSA C22.2 No. 213-M1987, ANSI / ISA 12.12.01:2007 [Class I, Division 2, Group A, B, C, D T4, Ta= -25°C to +80°C (Vertical:> +50°C derating, Horizontal: > +40°C derating)], EN 60079-0:2009, EN 60079-15:2010 [ II 3G Ex nA nC IIC T4 Gc, Ta= -25°C to +80°C (Vertical:> +50°C derating, Horizontal: > +40°C derating)]




23


Features


and dust pollutants

MECHANICAL

Dimensions (LxWxH)

121 x 144 x 118.6mm


Weight 1.37kg




Input/Output Wire I/P: AWG 18-10 O/P: AWG 16-10

MTBF2 > 500,000 hrs

ENVIRONMENTAL




Altitude 0–2,500m

SpecificationsINPUT

Voltage Range 85–264VAC 120–375VDC


Frequency 47–63Hz





OUTPUT

Voltage 48V


Current 10.0A

Power 480W








EN50718 / IEC62103







cCSAus to CSA C22.2 No. 213-M1987, ANSI / ISA 12.12.01:2007 [Class I, Division 2, Group A, B, C, D T4, Ta= -25°C to +80°C (Vertical > +50°C derating)], EN 60079-0:2009, EN 60079-15:2010 [Ex II 3G Ex nA nC IIC T4 Gc, Ta= -25°C to +80°C (Vertical > +50°C derating)]




24

Delta DRB-24V020ABBUFFER MODULE DIN RAIL 20 AMP

Features

• Full corrosion resistant Aluminium chassis• Long minimum buffering time of 250ms @ 24V/20A• Can connect in parallel to increase buffering time• Charging time of < 30 seconds• Conformal coating on PCBA to protect against chemical and

dust pollutants• Hazardous Locations approval to ATEX and Class I, Div 2

(DRB-24V020ABA)• IP20 Compliant• Overvoltage / Overcurrent / Short Circuit Protections• Meets worldwide safety requirements• RoHS Directive 2011/65/EU Compliant• Reliable design, with expected life of 10 years

MECHANICAL

Dimensions (LxWxH)

121 x 70 x 120.1mm


Weight 0.76kg

Indicators Green LED off: Unit is dischargine of Vin <22VDC Green LED on: Unit is fully charged Green LED blinking slowly (1Hz): Unit is charging Green LED blinking quickly (10Hz): Unit is discharging





Signal Wire AWG 24-10

Mounting Rail Standard TS35 DIN Rail in accordance with EN60715

SpecificationsINPUT

Nominal Voltage 24VDC

Nominal Voltage Range 22.8–28.8VDC

Current Charging mode < 0.6VDC Discharging mode 20A max.

Input Power (Standby) 2.5W Average

Max. Signal Input (Inhibit)

35V / 10mA

Max. Inrush current < 20A

Charging Time < 30 sec

OUTPUT

Nominal Voltage 24VDC typ. (depends on Vin)

Output Voltage Range - Switch=“Fix 22V” - Factory setting Switch=“FixVin-1V”

22–28VDC Buffering starts if terminal voltage falls below 22V Buffering starts if terminal voltage is decreased by > 1V

Max. Voltage 35VDC

Current 20A Max.

Buffering Time 250ms Min @ 24V/20A load 5sec Min @ 24V/1A load

Max. Signal Output 35V / 10mA

Signals Inhibit Signal (I) Ready Signal (R) Buffering Signal (B) Supply Voltage (+Vs)

“Low” - Shuts down Buffer Module “High” = Buffer Module is fully charged or in Standby “High” = Buffer Module is discharging or buffering Common +VS, 35V Max.

PARD (20MHz) < 200m Vpp @ 25°C during buffering mode

Parallel Connection Yes

Series Connection No

Protective Device Transient Voltage Suppressor (TVS) for signals

ENVIRONMENTAL


Component De-rating Vin=22.8-28.8VDC Max. load -T ambient=50°C -Tj <85% of Tjmax

Humidity 95%RH (Non condensing)

Altitude 2,500m

PROTECTIONS

Overvoltage 32V +10%

Overload / Overcurrent 30A Max

Short Circuit No damage

Reverse Polarity Protection

Yes


Electronic Equipment EN50718 / IEC62103





CSA to CSA C22.2 No. 213-M1987, ANSI / ISA 12.12.01:2007 (Class I, Division 2, Group A, B, C, D, T4) EN60079-0:2009, EN60079-15:2010 ( ExII 3G Ex nA nC IIc T4 Gc)



Galvanic Isolation Input/Output to ground: 1.5KVAC Signal to ground: 1.5KVAC

25

BUFFERINg TIME

DIMENSIONS

TECHNICAL DATASHEET

CliQ II Buffer Module24V 20A / DRB-24V020AB□

All parameters are specified at 25°C ambient unless otherwise noted. www.DeltaPSU.com (October 2013, Rev. 01)

2

Specifications

Input Ratings / Characteristics

Nominal Input Voltage 24VdcInput Voltage Range 22.8-28.8VdcMaximum Input Voltage 35VdcInput Current Charging Moded < 0.6A

Discharging Moded 20A MaxInput Power (Standby Mode) 2.5W AverageMaximum Signal Input (Inhibit) 35V / 10mAMax Inrush Current < 20ACharging Time < 30sec

Output Ratings / Characteristics

Nominal Output Voltage 24Vdc typ. (depends on Vin)Output Voltage Adjustment Range 22-28Vdc

Switch = “Fix 22V” Buffering starts if terminal voltage falls below 22VFactory Setting, Switch = “Vin-1V” Buffering starts if terminal voltage is decreased by > 1V

Maximum Output Voltage 35VdcOutput Current 20A MaxBuffering Time 250ms Min @ 24V/20A Load,5sec Min @ 24V/1A Load

(Refer to Fig. 1)Maximum Signal Output 35V / 10mA

Signals Inhibit Signal (I) “Low” = Shuts down Buffer ModuleReady Signal (R) “High” = Buffer Module is fully charged or in Standby Mode

Buffering Signal (B) “High” = Buffer Module is discharging or in Buffering Mode

Supply Voltage (+VS) Common +VS, 35V Max

PARD (20MHz) < 200mVpp @ 25°C during Buffering Mode

Parallel Connection YesSeries Connection NoProtective Device Transient Voltage Suppressor (TVS) for signals

Fig.1 Buffering Time (Typical Values at “ Vin – 1V” Mode)

MechanicalBuffering Time (Typical Values at “ Vin – 1V” Mode)

26

Delta DRR-20, DRR-40REDUNDANCY MODULES DIN RAIL 20A & 40A

Features

• RoHS Compliant• Relay alarm indirection• Built-in 2 channel DC OK signal• Conformal coating on PCBA to protect against chemical and

dust pollutants• Class I, Div 2 Hazardous Locations (DRR-20A, DRR-40A)• Ease of wire connection to terminals• Wide Input & Output Range 22-60 Vdc• Full corrosion resistance aluminium chassis even with deep

scratches

TECHNICAL DATASHEET

CliQ II Redundancy Module20A, 40A / DRR-20□, DRR-40□

All parameters are specified at 25°C ambient unless otherwise noted. www.DeltaPSU.com (October 2013, Rev. 01)

1

Highlights & Features– RoHS Compliant– Relay alarm indirection– Built-in 2 channel DC OK signal– Caused by rugged handing– Conformal coating on PCBA to protect against chemical and

dust pollutants– Class I, Div 2 Hazardous Locations (DRR-20A, DRR-40A)– Ease of wire connection to terminals– Wide Input & Output Range 22-60 Vdc– Full corrosion resistance aluminium chassis even with deep

scratches

Safety Standards

CB Certified for worldwide use

Model Number: DRR-20□, DRR-40□Unit Weight: 0.37kg, 0.51 kgDimensions (L x W x D): 121 x 50 x 122.1 mm

General Description

The new Redundancy Module DRR 20□ and DRR 40□ are the latest offering from one of the World’s No.1 Power Supply Company. The product offers a variable input & output voltage from 22-60V, a wide temperature range from -40°C to 80°C. The state-of-the-art design is made to withstand harsh industrial environments. The rugged, compact aluminium case is shock and vibration resistant according to IEC60068-2-6. Due to the wide input & output voltage range from 22 to 60Vdc, the Delta’s CliQ II Redundancy Module is able to support power supply in parallel operation. The DRR module has an alarm relay contact as an indicator.

Model Information

CliQ II Redundancy Modules

Model Number Input Voltage Range Output Voltage Output CurrentDRR-20□ 24-48Vdc Vin-0.65V (Typ) 20A

DRR-40□ 40A

Model Numbering

DR R - □XXDIN Rail Redundancy Module Output Current

20 – 20A40 – 40A

A - Metal Case, with Class I, Div 2N - Metal Case, without Class I, Div 2

MECHANICAL

Dimensions (LxWxH) 121 x 50 x 122.1mm


Weight 0.375kg 0.515kg

Indicators DC Input OK: Vin1 OK and Vin2 OK (Green LED)


Electrical Equipment IEC60204-1 (Over Voltage Category III)

Electrical Safety UR/cUR recognized to UL60950-1, SIQ BG to EN60950-1, CB test certificate and report to IEC60950-1 and CE.


UL/cUL recognize to UL508


cCSAus to CSA C22.2 No.213-M1987, ANSI / ISA 12.12.01:2007 [Class I, Division 2, Group A,B,C,D T4, Ta = -40°C to +80°C (> +50°C derating)] EN60079-0:2009, EN60079-15:2010 [ExII 3G Ex nA nC IIC T4 Gc, Ta = -40°C to +80°C (> +50°C derating)]

CE Conformance with EMC guideline 2004/108/EC and for low voltage guideline 2006/95/EC For DRR-20A and DRR-40A: In conformance with Equipment for explosive atmospheres (ATEX) directive 94/9/EC

Electronic equipment

EN50178 / IEC62103

Safety Entry Low Voltage

PELV (EN60204), SELV (EN60950)

RoHS Compliant RoHS Directive 2011/65/EU Compliant

Protection Against Electric Shock

DIN 57100-410

SpecificationsINPUT DRR-20 DRR-40

Nominal Voltage 24-48VDC 24-48VDC

Current 20A max. 40A max.

Input Voltage Alarm / Relay Contacts

24V system: both Vin1 & Vin2 >18V ± 5% or <30V max. relay contacts

48V system: both Vin1 & Vin2 >36V ± 5% or <60V max. relay contacts

Note: The LED will turn on when The Vin1 & Vin2 > 18V ±5% (For 24V system) or > 36V ±5% (For 48V system) and not more than 30V (For 24V system) or not more than 60V (For 48V system), The relay contacts will be closed. If Vin1 & Vin2 is under or over this range, The LED will be turn off.

OUTPUT

Nominal Voltage Vin-0.65V (Typ) Vin-0.65V (Typ)

Nominal Current 20A max. 40A max.

Derating above +50 °C > 50°C (2.5% / K.) > 50°C (2.5% / K.)

Short Circuit / Over Load Limit

<25A <50A

Efficiency > 97% typ. > 97% typ.

Note: The overload condition must be controlled by The PSUs in parallel; The limit of input current would not more than 25A (For 20A module) or not more than 50A (For 60A module).

ENVIRONMENTAL


Power De-rating > 50% of Full load @ 70°C derated Linearly

Humidity 95%RH (Non condensing)

Continued next page

27

Delta DRR-20, DRR-40REDUNDANCY MODULES DIN RAIL 20A & 40A

DIMENSIONS DRR-40

DIMENSIONS DRR-20

28

Delta DRU-24V40ABNDC-UPS MODULE DIN RAIL 20V 40A

Features

• Full corrosion resistant Aluminium chassis• Suitable for 24V system up to 40A• Built-in diagnostic monitoring for DC OK, Discharge and

Battery Fail by relay contacts• LED indicator for DC OK, Battery Fail, DC Input, Battery

Reverse Polarity and Battery Discharge• High MTBF > 500,000 hrs as per Telcordia SR-332• Wide operation temperature range from -20°C to +60°C• Conformal coating on PCBA to protect against chemical and

dust pollutants

MECHANICAL

Dimensions (LxWxH) 121 x 50 x 117.3mm


Weight 0.60kg


Input/Output Terminal 4 Pins (Rated 600V/60A)

Signal 6 Pins (Rated 300V/27A)

Input/Output Wire AWG 12-6 (Load: 0-20A) AWG 8-6 (Load 20-40A)

Signal Wire AWG 24-12

Mounting Rail Standard TS35 DIN Rail in accordance with EN60715


Electronic Equipment EN50718 / IEC62103





CSA to CSA C22.2 No. 213-M1987, ANSI / ISA 12.12.01:2007 (Class I, Division 2, Group A, B, C, D, T4) EN60079-0:2009, EN60079-15:2010 ( ExII 3G Ex nA nC IIc T4 Gc)



Galvanic Isolation Power Port to Housing 1.0KVac Signal Port to Housing 1.0KVac Power Port to Signal Port 1.0KVac

SpecificationsINPUT

Nominal Voltage 24VDC

Current 2A ± 1A

Efficiency Charging mode: > 70.0% Buffering mode: > 99.0%

Charging Time* < 3hr ± 1hr for battery 24V/15AH

*Charging time depends on the last state of discharge w.r.t. buffering time and load current.

OUTPUT

Output Voltage Range 23–28VDC

Current 40.0A Max.

Power 960W Max (24V, 40A)

Voltage Drop Between Input and Output

Charging mode: 0V between DC input to load Buffering mode: 0.1V between battery to load @ 40A load

BATTERY INPUT/OUTPUT CHARACTERISTICS

Nominal Battery Voltage 24Vdc, SLA Sealed lead acid battery 2 x 12Vdc, SLA Sealed lead acid battery

Battery Voltage Range 23-28Vdc (continuously operating) 30Vdc Max (the maximum voltage that will not cause damage to the unit) 14Vdc Min (the voltage level of battery to enable “BAT Fail” function)

Battery Capacity 7.5AH/ 12AH/ 15AH

Battery Fuse Auto 50A / 80V, FK3 (Littelfuse) or similar in the battery path. The battery fuse protects the wires between the battery and the unit.

Battery Charging Mode CC-mode (constant current) at 2A

End-of-Charge Voltage The unit always charge with fix input voltage value

ENVIRONMENTAL


De-rating No power de-rating across the entire operating temperature range (-20°C to +60°C)


Altitude 0–3,000m

PROTECTIONS

Overvoltage 42-52A, Latch-off Mode

Over Temperature < 90°C Surrounding Air Temperature inside the unit, Latch-off Mode

Short Circuit (at system) Shutdown, Latch-off Mode

Input Polarity Protection* Yes (DC OK = open contact), LED Status = Orange)

Battery Polarity Protection**

Yes (DC OK = open contact), LED Status = Orange)

Wrong Battery Voltage Protection

Yes, 30Vdc Max (the maximum voltage that will not cause damage to the unit)

Deep Discharge Protection

Yes (23V ± 0.5V)**

Degree of Protection IP20

Protection Against Shock Class III

Continued next page

*If the orange status LED is on, this indicates a failure in the installation. In this case, do not turn on power supply while the battery is connected. Danger of explosion! ** The unit will stop operating when the battery voltage detected is less than 23V ± 0.5V

29

BUFFERINg TIME VS OUTPUT CURRENT

DIMENSIONS

TECHNICAL DATASHEET

CliQ II DC-UPS Module24V 40A / DRU-24V40ABN

All parameters are specified at 25°C ambient unless otherwise indicated. www.DeltaPSU.com (May 2014, Rev. 00)

3

Buffering Time

Output Current

Buffering Time7.5AH 12AH 15AH

2.5A 6,500s 14,500s 19,000s

5A 3,000s 7,000s 9,000s10A 1,200s 2,400s 3,200s20A 400s 1,100s 1,500s30A 120s 450s 600s40A 25s 200s 280s

Mechanical

Case Cover / Chassis Aluminium

Dimensions (L x W x D) 121 x 50 x 117.3 mm

Unit Weight 0.60 kg


Terminal Input / Output 4 Pins (Rated 600V/60A)

Signal 6 Pins (Rated 300V/27A)

Wire Input / Output AWG 12-6 (Load: 0-20A)AWG 8-6 (Load 20-40A)

Signal AWG 24-12Mounting Rail Standard TS35 DIN Rail in accordance with EN 60715Noise (1 Meter from power supply) Sound Pressure Level (SPL) < 40dBA

Fig. 1 Buffering Time VS. Output Current

30

Delta DRP024V060W3BNAC-DC DIN RAIL 24 VOLT 60 WATTS 3 PhASE

Features

• Universal AC input voltage: 3 x 320VAC – 600VAC (3-Phase) or 2 x 360VAC – 600VAC (2-Phase)

• Power will not de-rate for the entire input voltage range• Power Boost of 150% for 5 seconds• Full corrosion resistant aluminium chassis• Conformal coating on PCBA to protect against chemical and

dust pollutants

MECHANICAL

Dimensions (LxWxH)

121 x 50 x 117.3mm


Weight 0.66kg





ENVIRONMENTAL


Power De-rating Vertical Mounting

> 50°C de-rate power by 2.5% / °C > 70°C de-rate power by 5% / °C

Power De-rating Horiztonal Mounting



Altitude 0–2,000m

SpecificationsINPUT

Voltage 3 x 320-600VAC (3-Phase) or 2 x 360-600VAC (2-Phase)

Current < 0.30A@3 x 400VAC, < 0.25A@ 3 x 500VAC

Frequency 47–63Hz

Efficiency* at 100% load > 86.0% @ 3 x 400VAC & 3 x 500VAC

Max. Inrush current < 30A @ 3 x 400VAC & 3 x 500VAC

Leakage current < 3.5mA @ 3 x 400VAC & 3 x 500VAC

OUTPUT

Voltage 24V


Current 2.50A (continuously operating at 24V) 3.75A (Power Boost for 5 seconds at 24V)

Power 60W (continuously operating at 24V) 90W (Power Boost for 5 seconds at 24V






Hold-up Time > 20ms @ 3 x 400VAC > 40ms @ 3 x 500VAC (100% load)

NOTES: *Fulfills test conditions for up to 600Vac input voltage.


Safety SIQ to EN 60950-1, UL/cUL recognized to UL 60950-1 and CSA C22.2 No. 60950-1, CB scheme to IEC 60950-1


UL/cUL listed to UL 508 and CSA C22.2 No. 107.1-01, CSA to CSA C22.2 No. 107.1-01 (File No. 181564)

Electrical Equipment

In Power Installations: EN 50178 / IEC 62103

CE In conformance with EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC. For DRP024V060W3BA: In conformance with Equipment for explosive atmospheres (ATEX) directive 94/9/EC


Galvanic Isolation Input to Output 4.0KVAC Input to Ground 1.5KVAC Output to Ground 1.5KVAC

31


Features


and dust pollutants

MECHANICAL

Dimensions (LxWxH)

121 x 50 x 117.3mm


Weight 0.66kg





ENVIRONMENTAL







Altitude 0–2,000m

SpecificationsINPUT



Frequency 47–63Hz



Leakage current < 3.5mA @ 3 x 400VAC & 3 x 500VAC

OUTPUT

Voltage 24V



Power 120W (continuously operating at 24V) 180W (Power Boost for 5 seconds at 24V

















32


Features


• Power will not de-rate for the entire input voltage range• Power Boost of 150% for 5 seconds• Full corrosion resistant aluminium chassis• Conformal coating on PCBA to protect against chemical and


MECHANICAL

Dimensions (LxWxH)

121 x70 x 117.3mm


Weight 0.89kg




Input Wire Output Wire

AWG 18-12 AWG 16-12

ENVIRONMENTAL







Altitude 0–2,000m

SpecificationsINPUT



Frequency 47–63Hz


Max. Inrush current < 40A@ 3 x 400VAC & 3 x 500VAC


OUTPUT

Voltage 24V



Power 240W (continuously operating at 24V) 360W (Power Boost for 5 seconds at 24V)

















33


Features

• Universal AC input voltage: 3 x 320Vac – 600Vac (3-Phase) or 2 x 360Vac – 600Vac (2-Phase)

• Power will not de-rate for the entire input voltage range• Power Boost of 150% for 5 seconds and 200% for 2 seconds• Full corrosion resistant aluminium chassis• Conformal coating on PCBA to protect against chemical and


MECHANICAL

Dimensions 121 L x 140 W x 117.3 H mm


Weight 1.35kg





AWG 18-8 AWG 12-10

ENVIRONMENTAL







Altitude 0–2,000m

SpecificationsINPUT

Voltage Range 3 x 320-600VAC (3-Phase) or 2 x 360-600VAC (2-Phase)

Current < 1.00A@ 3 x 400VAC, < 0.75A@ 3 x 500VAC

Frequency 47–63Hz


Power Factor > 0.95 3 x 400VAC, > 0.94 3 x 500VAC



OUTPUT

Voltage 24V


Current 20.0A (continuously operating at 24V) 30.0A (Power Boost for 5 seconds at 24V) 40.0A (Power Boost for 2 seconds at 24V)

Power 480W (continuously operating at 24V) 720W (Power Boost for 5 seconds at 24V) 960W (Power Boost for 2 seconds at 24V)

Line regulation < 0.5% typ. (@ 3 x 320-600VAC input, 100% load)

Load regulation < 1% typ. (@ 3 x 320-600VAC input, 0–100% load)




Hold-up Time > 20ms @ 3 x 400Vac & 3 x 500Vac (100% load)






Electrical Equipment In Power Installations: EN 50178 / IEC 62103


cCSAus to CSA C22.2 No. 213-M1987, ANSI / ISA 12.12.01:2007 [Class I, Division 2, Group A, B, C, D T4, Ta = -25°C to +80°C (> +50°C derating)] EN 60079-0:2012, EN 60079-15:2010 [ II 3G Ex nA IIC T4 Gc, Ta= -25°C to +80°C (> +50°C derating)]

Ex II 3G ATEX 94/9/EC





34


Features


• Power Boost of 150% for 5 seconds• Full corrosion resistant aluminium chassis• Conforms to harmonic current IEC/EN 61000-3-2, Class A• Conformal coating on PCBA to protect against chemical and

dust pollutants

MECHANICAL

Dimensions (LxWxH)

121 x 255 x 117.3mm


Weight 2.60kg





AWG 18-8 AWG 12-10

ENVIRONMENTAL



> 50°C de-rate power by 2.5% / °C


Altitude 0–2,000m

SpecificationsINPUT



Frequency 47–63Hz


Power Factor at 100% load

> 0.95 @ 3 x 400VAC, > 0.94 @ 3 x 500VAC

Max. Inrush current < 40A@ 3 x 400VAC & 3 x 500VAC

Leakage current < 3.5mA @ 3 x 600VAC

OUTPUT

Voltage 24V



Power 960W (continuously operating at 24V) 1440W (Power Boost for 5 seconds at 24V)

Line regulation < 0.5% typ. (@ 3 x 320-600VAC, 100% load)

Load regulation < 1% typ. (@ 3 x 320-600VAC, 0–100% load)




Hold-up Time > 20ms @ 3 x 400VAC & 3 x 500VAC (100% load)











35

Notes:

POWERBOX AUSTRALIA PTY LTDSydney Head Office:4 Beaumont Road, Mt Kuring-gai, NSW 2080Melbourne:2/896 Burwood highway, Ferntree gully VIC 3156

Toll Free: 1800 251 380 Email: [email protected]

POWERBOX PACIFIC LTDNew Zealand 1a henry Rose Place, Albany Auckland New Zealand 0632

Toll Free: 0800 104 480 Email: [email protected]

www.powerbox.com.auwww.powerbox.co.nz

14PB014 Delta DIN Rail Brochure Sep 2014

Documents

Delta DIN Rail Power Supplies - Ferret.com.au · 23 DRP048V480W1BN AC-DC DIN RAIL 48 VOLT 480 WATTS 24 DRB-24V020AB BUFFER MODULE DIN RAIL 20 AMP 26 DRR20, DRR40 REDUNDANCY MODULES